Hardware :: Can't Even Reflect Screen Across X Or Y Axis?
Jul 9, 2010
My LCD has pivot mode but i don't know how i can use that. I've read manual but I can't even reflect my screen across x or y axis. I've tried also transform option. Nothing worked. In result I've got only massage that i don't understand:
Code:
$ xrandr -x
X Error of failed request: BadMatch (invalid parameter attributes)
Major opcode of failed request: 151 (RANDR)
Minor opcode of failed request: 2 (RRSetScreenConfig)
Serial number of failed request: 14
I have asked for a video capturing software before but recommend a GOOD screen recorder where you can select the window/window size the axis and also a good editing software which will render/export into FULL 720p HD
I have followed the calculator sample tutorial and cannot get the the calculator client working, the problem appears on the server side. I am working on Linux, I am using:
I have used Eclipse to compile the example. When I run the calculator client I get the following message on the command line: "terminate called after throwing an instance of 'axiscpp::SoapFaultException' what(): Cannot deserialize the requested element " and warning message:
I have got an old print server Axis 150. It does not support TCP/IP I know that there was a thread about this print server [URL].... but I didn't found answer to "how to bring it up" there.
I have a Powerbook G4 1.67Ghz. My problem is that if I sleep my laptop by choosing sleep from the desktop menu in kde then it sleeps and wakes fine but when it wakes the pointer is locked to the x axis and tends to snap back to the same point when I'm not actively manipulating it. This is also the case if my laptop sleeps after 10mins inactivity. If I sleep the laptop by closing the lid this problem does not occur. When it wakes all is working well.
I have installed fedora linux distribution on oracle virtual machine on windows. The problem am facing is whenever I make changes( as in adding users, configuring web servers, making any kind of changes in files etc.).. and after a while I reboot my machine, I dont see any changes I made.. the changes do not just show up.
what could be the reason behind it and how do I fix it ?
I am trying to troubleshoot an Apache/Mysql server that once every few days falls over due to memory starvation. I thought I had tuned my httpd.conf file with relativley small MaxClients and so on, but then noticed some unusual RES values in top while monitoring.
In short, `top -b -n1 -u apache` shows that I have 28 httpd processes. their VIRT is ~300MB for each process (I understand this is shared), and the RES ~50MB for each. I thought this wasn't shared. Is this true? I just noticed 2 of the processes jump to 1.2g. If RES represents non-shared memory then concievably 1.2g x 28 processes would be a problem on an 8GB server.
Whenever, I successfully save a new document, the document's icon does not display in the KDE File Dialog until OpenOffice restarts. The document exists, because trying to do a "Save As" on it produces a dialog that states if one wants to overwrite the document. Also, trying to export a PDF twice has the same outcome.
OpenOffice 3.2.1 scim 1.4.7-174.1 KDE 4.4.4 openSUSE 11.3 64-bit
Upon any kernel updates, or uninstalling old kernels that I no longer need, the hd(0,2) gets replaced by hd(0,0), which leads to not being able to boot, unless I manually reset the hd(0,0) back to hd(0,2).
I just installed Kubuntu, but whenever I install an application or remove one, the Kickoff Menu doesn't update to reflect this. The strange thing is, I can actually click on apps I supposedly uninstalled and they still launch, for example I replaced libreoffice with openoffice, and the menu still only shows libreoffice...
I have a shared folder set up that allows all users on the computer to have access to all the music on the computer. In the folder with all the music the group 'music' has permission to add and delete files and all users are members of 'music'. This should allow all users to have complete access to these files, however, when I add files to the folder they retain their original permissions and do not take on the permissions of the folder. I could change the permissions of the files to reflect the folder every time I add a cd. But that is annoying. What I am wondering is if there is any way to make files automatically reflect the permissions on the folder they are moved into.
I have the application and kernel module running on my system. In the meantime, I am changing the date and time of the system. However, this change doesn't reflect on log messages of the application that's being executed.
Is there a way to get a list of all packages installed since install (that are currently on the system) and upon re-install run an application that will automatically install those packages. This would save greatly on initialisation time (the re-set up afterwards). Essentially, I want to re-install and/or move to another machine and want to the new install to reflect the system as it currently stands.
I am a newbie to linux and running ubuntu server 10.10 (no gui), I had it configured with a fixed ip address and all was fine till I changed internet poroviders and got issued with a new router.
I am trying to configure the server to reflect the new settings of the new service provider. here are the contents of /etc/network/interfaces
Just so I got this right can someone tell me if I am right here. address is the IP I wish to give to my server statically. and gateway is the ip of the router. When I try to ping the router I get
Code: Ping 192.168.15.1 (192.168.15.1) 56(84) bytes of data. From 192.168.15.1 icmp_seq=1 Destrination Host unreachable When I try to ping the internet i get :
[Code]...
Is there anyone that can shed some light on where my problem may be. As i said before I got the new router I had been working with the server no problem.
I have created a TrueCrypt volume, mounted it in Windows, and created an image file for my OS partition using Macrium Reflect (free version). I made a Rescue CD for Macrium, and the setup works great on unencrypted files, but I have no way to mount the TrueCrypt volume, while booted to the Macruim rescue CD. I have Puppy Linux 4.3.1 on a CD, and can boot to it. I'm a beginner's beginner, however, and I haven't figured out how to install TrueCrypt with Puppy Linux running. Getting the Macrium recovery program to run with the TrueCrypt volume mounted looks even more complicated, and I don't know if it's even possible. I want to be able to recover my laptop from a drive failure, as well as protect my OS from bad programs or malware. Macrium reflect does this job well, because it:
1. is free
2. only writes the used space of the system partition to the image file, and also compresses the data, resulting in a relatively small file. (~ 50 percent of the used space on the OS partition)
3. retains drive alignment for a pre-aligned partition.
However, I wish to keep my backup partitions encrypted to protect my privacy. TrueCrypt does an excellent job of this because it:
1. is free
2. encrypts the OS and all data on the computer.
3. protects all backup data.
I like the fact that Puppy Linux can be loaded into memory, so I only need to boot from removable media to work on my OS partition. I understand there is a portable Ubuntu OS, and perhaps this would be a better platform for my goal? Is there a way to combine Linux on removable media, with Macrium Reflect, and recover an image from a TrueCrypt volume?
I am creating custom install media using the Fedora Core 14 DVD as a base and I have gathered all of the packages and their dependencies I require using the yumdownloader command.I made sure to download the @core group along with the ones listed above. The problem I'm running into is that I don't know how to update the media's repo information to reflect some of the updated packages I have downloaded. So when I go to install on the device, it's saying it can't read/open a certain package and you can see that it's looking for an older version because I'm guessing its repo is telling anaconda that this is the specific version to look for. I'm looking for a way to "update" the repo found on the installation media.
I want to plot a set of data in only one plot.The problem is that some points of the data should be better plotted in a linear scale (lets say 0 to 100,000) but there are other data points that, exceding the value 100,000, would be better plotted in a logarithmic scale, as they goes in the range 100,000 to 500,000,000. Let's say the data is:
Code:
X Y 0 100 10000 80 20000 75
[code]....
Is there a way to plot all these points in the same plot in only one X-axis showing two different ranges in that axis: linear: 0-100,000 logarithmic: 100,000 - 1,000,000,000?The axis would be read, for example, as:
I can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
This obnoxious bar has just appeared in Smplayer at the top of the screen. It stays there even when I go full screen. Now full screen isn't full screen and there are black edges on both sides of the screen. I have not be able to figure out how to hide it. I do not need or want this onscreen display. How can I configure Smplayer to make this go away? How can I get my 16:9 full screen aspect ratio back? I have done nothing to mplayer or smplayer as far as editing any or changing any configuration files. I tried several videos and it displays on all of them. It was not there last time I used Smplayer.
I have openSUSE 11.3 with an nvidia card connected with two monitors. In the past I used xinerama which was ok, but now I need to have two separate desktops, one on each screen. I set the nvidia driver with x screen, and now one screen works perfect and the other only shows a black screen. When I move the mouse over the black screen, the mouse pointer turns into an X, but moves correctly, which seems to me that the problem is that I need to set the second desktop to that screen. I looked on forums on how to do so, and no luck.
Alright guys. I need to find a way to enable a black screen screensaver (or turn off the monitor, or something to avoid burn in) while the machine is sitting at the login screen and completely turn off the ability for the computer to sleep. how I can accomplish that?
I have been using ubuntu wel a long time now and I know my way around in linux but I recently updated my laptop from ubuntu 10.04 to ubuntu 10.10 all went fine until I had to restart my laptop. I got a purple screen (loading screen) with 4 dots and a oldskool like font which said: Ubuntu 10.10 Right after that the screen goes purple and its like the system halts I hear no login sound etc just a purple screen. So I did a clean install from the 10.10 live cd which booted perfectly fine and the system was also useable like before. But when I installed the system and rebooted it again no problems.
But when I tried to install the proprietary nvidia driver (the recommended one) I got the same problem again the purple screen. After searching a while on the internet I only found posts which had the problem with ATI cards but my laptop is fitted with a Nvidia Geforce 9300 M card. So I tried several things like removing the xorg.conf (read it somewhere) which ofcourse did not work, and booting in graphics fail safe mode which worked. So the point is in 10.04 and 9.10 I CAN use my video card drivers but not in 10.10 is there a solution to this problem? I am talking about the 32 bit version of ubuntu and here's my system hardware profile:
Intel core 2 duo t7350 @ 2,0 ghz / 3mb l2 cache 2 GB DDR3 ram 160 gb hdd Nvidia 9300m gs Chipset: I dont know sorry Model: Samsung R710
I got macbook pro 5.1 recently upgraded to 11.04, all works out of the box! However when I watch movies or play a game from time to time I observe a horizontal line in the upper part of my screen which I believe is a screen tearing.Depending on a movie player this effect is more or less visible.nvidia propietary driver enabledvsync enabledcompiz settings adjusted (refresh rate ->60, vsync)nvidia-settings -l is loaded with the systemMaybe it's not a huge problem but everything works fine under osx
I have recently installed 11.04 natty on Intel Core i3-2100 3.1 GHZ using its own graphic accelerator. When the screen is idle for a long time, more than 1 hour, I get a black screen with the mouse arrow but nothing else. the mouse moves the cursor and Ctl+Alt+F1 does work. How to fix this problem?
I installed Ubuntu 11.04 today as the main OS on my laptop.I had deleted my XP partition, and repartitioned it according to a guide I had found. (http:url)......Basically it was setup like this: 500mb ext2 primary partition, has the grub folder, I believe this is either the '/' partition, or the '/boot' partition 2gb swap space logical partition
10gb ext4 logical partition -- this is either the '/' or the '/boot', it contains the 'bin,boot,cdrom,dev' etc folders 243gb (the rest of my hard drive, with the exception of a partition that contains documents and files from my XP OS, formatted to NTFS) ext4, this is the one that has all my desktop/documents/etc folders.After Ubuntu was done installing, I had some message pop up about installing an ATI proprietary driver for my ATI graphics card (an ATI Radeon HD 4330, I believe, I may have messed that number up). I installed it and rebooted, no problem.
Next, I had another update window pop up with 198 items checked and ready to download and install. I went through all of this, and rebooted, again, no problem.Next thing I did was install some apps that were essential for me to have to use for my work (an ide, chat programs, etc). No problem with any of that.Last thing to install was the OSE Virtualbox, and then I installed WindowsXP Pro and Windows Vista Business, then installed the guest addition addon for VB. This all worked without any issues whatsoever.
Time goes on, and I notice my computer is heating up much more than (seemingly) normal. I begin to wonder if its my graphics card. So I shut down the computer and let it cool down. Reboot, and no problem, still working fine.Then I opened a couple of apps and tried a simple game (can't remember the name) I believe it was a simple 3d topdown, as I wanted to test my graphics card. This is where things seemed to start to go wrong. My laptop began hanging, not even allowing me to access the terminal via ctrl+alt+f2. The screen flashed and I saw the blue/green/grey fuzz that I get when the graphics card is starting to heat up too much. Then everything hangs and I can't do anything at all, including move the mouse. I did a hard reboot (I believe this is what you call pulling the plug/pressing the power button, correct me if I'm wrong). I then rebooted, saw a chkdisk, then it booted seemingly normal, but it hung right after the purple screen after the grub screen.
This is pretty much where I'm at right now. I strongly suspect the fault is with the ATI drivers, but have been completely unsuccessful in my attempts to fix it. I've googled just about everything I could think of, along with searching these forums. I've tried just about everything listed in the forums, but to no avail.I've tried the commands that are supposed to purge the ati drivers, but all I get are errors that say they can't remove the 'virtual drivers'.
Right now I'm booting off a live cd, so I know the computer still works fine, just not my actual installed OS. I'd really like to get the issue resolved without having to reinstall, as it took quite awhile just to get it usable in the first place, but this has already taken so much time, I may just resort to that if we can't solve it any other way. Got too much work to catch up on as it is.As a re-instated note, perhaps if you have any tips, but not particularly about fixing the OS, my laptop (I'm strongly guessing my graphics card) is heating up much more than normal, compared to that when XP was installed. Is this more than likely just a driver issue, as is the rest of it? Also, I did have Compiz installed, though I didn't choose for it to be installed, I believe it came pre-installed. I've heard it could cause some issues, though I have no idea as to the validity or relation to this particular issue.
Edit: I just remembered while searching for a solution, I found a post somewhere that said something about the information not being sent to the monitor from the graphics card properly, thus no desktop. I'm guessing that'd still fall under the driver issues, but again, I'm unsure. I would think that wouldn't be entirely true anyway, since I can still see my mouse fine, just no desktop, only a black screen.
I downloaded Fedora-14-i686-Live-Desktop.iso and used the Fedora liveusb-creator to put this on a 2GB USB stick. Everything seemed to have gone well and it said complete; however, when I try to boot from the USB stick, I get a black screen with a linux copyright notice at the top and it just stays at that screen forever. I tried this on two computers with the same results.
I'd previously tried with Ubuntu and had a similar issue, it would go to a purple (if I remember correctly) Ubuntu screen and it sat that forever.
I am using Xubuntu 10.10 64bit . When I press the quit or logoff buttons on the desktop it takes me to the logon screen and then at the bottom right corner it allows me to shutdown or reboot. I would like to bypass this screen entirely,and just shutdown reboot from the desktop. Only I use this machine at home ,no none else needs to log on. Is there any way to do this?
