Ubuntu :: Mount TrueCrypt Volume To Recover Macrium Reflect Image?
Feb 28, 2011
I have created a TrueCrypt volume, mounted it in Windows, and created an image file for my OS partition using Macrium Reflect (free version). I made a Rescue CD for Macrium, and the setup works great on unencrypted files, but I have no way to mount the TrueCrypt volume, while booted to the Macruim rescue CD. I have Puppy Linux 4.3.1 on a CD, and can boot to it. I'm a beginner's beginner, however, and I haven't figured out how to install TrueCrypt with Puppy Linux running. Getting the Macrium recovery program to run with the TrueCrypt volume mounted looks even more complicated, and I don't know if it's even possible. I want to be able to recover my laptop from a drive failure, as well as protect my OS from bad programs or malware. Macrium reflect does this job well, because it:
1. is free
2. only writes the used space of the system partition to the image file, and also compresses the data, resulting in a relatively small file. (~ 50 percent of the used space on the OS partition)
3. retains drive alignment for a pre-aligned partition.
However, I wish to keep my backup partitions encrypted to protect my privacy. TrueCrypt does an excellent job of this because it:
1. is free
2. encrypts the OS and all data on the computer.
3. protects all backup data.
I like the fact that Puppy Linux can be loaded into memory, so I only need to boot from removable media to work on my OS partition. I understand there is a portable Ubuntu OS, and perhaps this would be a better platform for my goal? Is there a way to combine Linux on removable media, with Macrium Reflect, and recover an image from a TrueCrypt volume?
View 5 Replies
ADVERTISEMENT
Jul 16, 2011
I have a dd image of a full drive (as a file) that was using Truecrypt system encryption under windows. I want to mount the main partition from that image using Linux's Truecrypt. I am familiar with dd loopback devices and have the partition offset, but I don't know how I can mount it like this because I need to use the truecrypt command.
Is there perhaps some way to create a fake device file for the disk image that I can mount from within Truecrypt?
View 1 Replies
View Related
Feb 9, 2010
I have a 2nd hard drive that I have encrypted using true crypt. Is it possible to set this up with key files (or some other way) to auto mount when linux boots. I need it in true crypt because there are some work programs I dual boot to use in windows, and need to have access to the drive in XP from time to time, and true crypt can mount there as well. But 90+% of my time is in linux and I would like to have it auto mount through fstab (or whatever way it needs to be). My entire linux setup has been set up with encryption through dm crypt and LUKS (except for /boot). So I would think having a key file stored on the computer and an auto mount fstab would be just as secure as however secure my LUKS setup is. So any way to auto mount a true crypt 2nd drive volume?
View 3 Replies
View Related
Apr 1, 2011
I have an Ubuntu 10.04 machine at home and apache setup on it (files are located in a Truecrypt volume). The reason for the web server being that I wanted to access my files wherever I'm at (i.e. hotel, work, hotspots, etc...). So far, it's worked out great for me seeing as a I can http download my files (or stream media files). However, I am often on a public hotspot and I know it's a matter of time before someone finds the webserver on my computer. I have the machine firewalled and password protected (via .htaccess), but either way I don't want people looking in on my computer.
The problem: I have used Truecrypt for a long time and completely trust using the program to encrypt/unencrypt a volume container to store my files. Usually, I would remote desktop into my computer and mount/unmount the volume when I needed it. However, after time it get's really annoying to do this. So I eventually figured out how to setup a bash script to automatically do this for me (which I put on the usb part of my phone). What I wanted to do was to be able send the bash script to my Ubuntu machine (via ftp from my phone) and have Ubuntu automatically run the script. Is this possible? What programs do I need on Ubuntu?
I was thinking about using something like cron, but that is for scheduled times. I don't really have a set time in which I need my files, it's pretty sporadic depending on how much I travel. Thus the need for being able to remotely mount the volume when I need it.
Summary: I need a way for Ubuntu to read a folder every minute or so to check for bash scripts to run. I want to be able to send the bash script via ftp from my phone, have Ubuntu run the script, then delete itself (so as to not store the password). I already know the script in which to mount the Truecrypt volume and how to send the file via ftp from my phone. It's really a matter of what program to use in Ubuntu to find and run the script.
View 8 Replies
View Related
Jul 16, 2011
I successfully created a TrueCrypt volume and mounted it and put some files there.
Then I tried to unmount and just could not.
I can still see the files when I go to /media/truecrypt1.
View 1 Replies
View Related
Aug 17, 2010
I have been using truecrypt to mount a partition on my computer for a few months now. Yesterday I tried to access it and it failed, with the following error:" mount: you must specify the filesystem type "
When creating the partition, the filesystem type was set to ext2. Apart from yesterday, I have not accessed this partition for a number of days now, and have done nothing to the operating in system in the ways of changing settings and such for a good week.
View 3 Replies
View Related
May 15, 2011
I mount truecrypt ntfs hidden volume in Slackware, i can read but i can't write to it. It shows "Operation not permitted". I can read and write from other distro without any problem.
View 12 Replies
View Related
Jan 22, 2010
I installed TrueCrype 6.3a on my 8.1 Ubuntu. Everything went fine until I got to the part where I need to protect my hidden volume from damaged caused by writing to the outer volume (these instructions: [url] ). I can't find the checkbox to "Protect hidden volume from damaged caused by writing to outer volume". The closest thing I can find is an option to "Protect hidden volume when mounting outer volume". Intuitively these don't sound the same to me. There are 2 difference between my setup and the instructions; 1) the instructions appear to be written for Windows and not Linux. 2) I am using a file volume and not a partition volume.
Does anyone know where the option is to protect the hidden volume when writing to the outer volume?
View 2 Replies
View Related
Jul 16, 2010
I installed TrueCrypt in Microsoft Windows XP SP3 (no Linux installations present) and I stopped the TrueCrypt service in the Windows enviroment, and then, I restarted, and all the sudden it seemed the PC can not see the Hard Disk at all at startup, nada... I believe I dismounted it by stopping the TrueCrypt service... So the PC no longer understands there is a TrueCrypt volume in place, and I inserted the TrueCrypt recovery disk, and it can not do any thing, I restored the bootloaders, the true crypt loader, and once I finished this, I press ESC, and it says there are no bootable devices, so nothing. I even decrypted the disk, and it seemed that nothing happened with the restore disk...
Is there any way I can make this partition bootable again? because I have every thing in that partition, every single bit of life... I have used TestDisk under Linux right now, but I am unsure of this, and I also further complicated the boot proccess, and now the PC states at startup about missing partition tables. When I start truecrypt from this Kubuntu live CD, I am unable to see the encrypted hard disk even with root, there is no way to see this hard disk, only can be seen in the TestDisk app. I really I am desperate, at least, if I can not make Windows Boot again, maybe just suck all the files out of the hard disk and put them some where for now, I really need to get back to work, and I cant seem to find a solution...
I know here at Ubuntu forums, some one may have the solution. And I do know for sure all the files on this volume are there because of the TestDisk app, so they are there, they are just not reachable.... (I have posted this problem on a Linux forums instead of a Windows forum because the only way to try to recover the volume is with Linux Kubuntu Live CD
View 2 Replies
View Related
Dec 29, 2010
How do I create a Truecrypt volume that will automount on bootup?
View 3 Replies
View Related
Jan 4, 2011
This one being Ubuntu 9.10 (yes, I know I really should upgrade). I keep a number of confidential files in a TrueCrypt container which is a standalone file in my Documents folder. I'd like to delete some of these, but I want to do it as securely as I can, but I believe if I simply hit 'Delete' with the file selected it'll move the file to the Deleted Items folder. This, I assume, means that the file is taken out of the encrypted volume and stored unencrypted in the Deleted folder.
I've been reading a little about the Shred command, and there seems to be some question about whether it works effectively with a journalled file system; and since I have no idea whether I'm using a journalled file system, or how to find out, I'm treating Shred and other over-writing secure deletion tools as ineffective for now.
With this in mind, can anyone advise me how I can protect the file stored in the TrueCrypt volume, and delete it in place, without taking it out of the encrypted area? And, further to that, can anyone tell me whether in fact the file is actually secured while it's in the encrypted volume? For all I know, just opening the volume may result in copies being made somewhere (apart from RAM).
View 5 Replies
View Related
Feb 24, 2011
If one uses a free ftp account to store private data such as bookmarks, they might prevent any eavesdropping by using ssh for the transfer (ftps), or alternatively sftp.
However, they would still have to trust the ftp hosting provider, because the data is stored unencrypted in the server.
Someone suggested putting all bookmarks in a small truecrypt volume instead and synchronizing this with the ftp server.
Performance issues aside, given that the plaintext only changes a little in each resync (only a bookmark is added usually), is the use of the truecrypt volume introducing a means for an eavesdropper to break the code?
View 6 Replies
View Related
Nov 6, 2010
I use truecrypt to encrypt a file containing my sensitive data (credit card numbers, bank account info, etc).
When I mount my encrypted file through truecrypt, I enter the password for my file. That's OK - I want to keep it that way. But when it gets mounted as a file system, ubuntu also requires that I enter the 'su' password.
How do I get around this?
I run ubuntu 10.04 (Lucid)
View 4 Replies
View Related
Dec 31, 2010
i want to use this line:
[code]...
to mount my volume at start up. it prompts for my truecrypt password(TCP) to open my files. so far i can put it in in the "Startup applications" but it needs root rights.. so it prompts for my root password and then again for my TCP. id like it to only ask for my TCP. i tried just putting the command and then also putting the command in a bash script and calling it from there.
View 1 Replies
View Related
Oct 29, 2009
using Debian Testing and installed Truecrypt using the deb package from truecrypt website meant for ubuntu. The installation is okay.
Started Truecrypt
-> selected the file to mount,
-> entered the correct password
then Truecrypt asked for the USER or ADMIN password. Enter either password brings me back to the same input screen asking for USER or ADMIN for password.
View 1 Replies
View Related
May 17, 2010
I found a way some times ago to mount a truecrypt volume when opening the session by insertion of the login password in the mounting script instead of putting it in clear in the script. I don't remember to command to read/transfer the password.
View 2 Replies
View Related
Dec 15, 2010
I have two questions regarding auto mount function of Truecrypt. First question:
I want to automatically mount my flash drive encrypted by Truecrypt using a keyfile whenever I plug the drive. How can I do this? I use Ubuntu 10.10.
Second question:
As I do not know the answer of my first question, I currently use following command in a startup script to mount my encrypted flash drive automatically at every system start-up.
Quote:
/usr/bin/truecrypt -k ~/keyfile --auto-mount=favorites
My problem with this method is, Truecrypt always search for the drive in the same path saved in favorite drives list, e.g. /dev/sdb1. However sometimes there are more than one flash drive plugged to my computer and my encrypted drive's path changes. In such cases Truecrypt cannot mount my encrypted drive because it cannot find the drive in its path.
As a workaround I tried "auto-mount=devices" parameter. It is slow because it checks every mounted drive, and some of them external hard disk big in size. Moreover it does not recognize any mount point parameter. I'd like to mount the drive to the same mount point every time.
Quote:
/usr/bin/truecrypt -t --auto-mount=devices -p "" -k ~/keyfile /media/MyMountPoint
The command above mounts the drive however it is slow and to the destination of "/media/treucrypt1".
View 3 Replies
View Related
Feb 16, 2011
I was given a forensic Image which I now know is a DD image of the drive (Vista) and am trying to mount the image or extract the image to another drive. I'm not sure of the extention type or if the image is a partition or the entire drive. I think it is the entire drive.
Is it possible to mount a DD image to a device. If I can't do that I just want to extract the files to run some programs against the drive. Can I view the files under Ubuntu or do I have to remove the drive and stick it into a Vista computer.
I purchased a second drive today and was hoping the command line would be something simple.
Or am I on the wrong track, should I be doing this all in a windows environment. The reason I picked ubuntu was because of the reporting tools.
View 9 Replies
View Related
Jan 14, 2011
I have a Windows partition encrypted with TrueCrypt. If I start TrueCrypt (or RealCrypt) I can mount the partition through the GUI. before I encrypted the partition I used to auto-mount it at boot using fstab and it would appear in my places bar in the file managers. Is it possible to auto-mount truecrypt partitions from fstab?
View 2 Replies
View Related
Nov 18, 2010
I have a Truecrypt-encrypted Windows [system] partition, that I want to be opened and mounted automatically (using a keyfile) when I log into Debian, since it is also encrypted and I don't want to type two passphrases. It think this could be done with LUKS. With TC I probably have to go with the CLI, but haven't figured it out yet. And I can't add a keyfile to the volume using the GUI. In order to mount the volume I have to tick the Mount partition using system encryption (preboot authentication) checkbox, or otherwise I get Incorrect password or no TrueCrypt volume found. And same when I try to add a keyfile.
View 2 Replies
View Related
May 15, 2010
i got opensuse 11.2 (gnome) and created a hidden volume with truecrypt on it. i would like to install nicotine on the hidden volume now,an only run nicotine while it is mounted. i only know how to install stuff with yast, i have no idea how to handle the terminal. i tried but its more like stumbling around. yast always puts the program into the standard menu where i dont want it to be. and by the way,how to disable the autostandby on my monitor? i tried already, but it didnt work)
View 4 Replies
View Related
Aug 10, 2010
Installed Truecrypt onto openSUSE 11.3 (KDE) and noticed that Truecrypt needed to be started as root.Modified visudo using YAST asusername ALL = NOPASSWD: /usr/bin/truecryptHowever, when copying files from my backup drive into the Truecrypt partition, there is an access problem (couldn't remember actual error message)In Konsole , updated visudo to username ALL = (ALL) NOPASSWD: /usr/bin/truecrypt Copying is allowed and working fine.Question:1. What is the difference between the above two visudo setting?2. How to updated visudo to the second setting in YAST?3. How to change the editor for visudo in konsole using nano instead of vi?
View 1 Replies
View Related
May 5, 2011
How do I configure my Debian installation to mount external USB drives to mount points based on the volume names of the drives? For instance, if I have a thumb drive with the volume name of "SWORDFISH," how do I have Linux mount it at /media/SWORDFISH? I'm aware that this can be setup in FSTAB, but that requires that I know the UUID of the device beforehand and that I take the time to set each external device up in FSTAB first. That does nothing for me when I have a thumb drive that has never been plugged into my computer before.
This seems to be setup by default in Ubuntu/Kubuntu, but is not working for me with a fresh installation of Debian Squeeze and KDE4. I've spent the past 2 hours Googling for a solution and have turned up nothing. UPDATE: My results are inconsistent. Sometimes Debian mounts devices to mount points based on the volume names, and other times it gives them generic mount points (e.g. /media/usb1).
View 2 Replies
View Related
Oct 14, 2010
I have a multisession DVD-R with an unreadable volume descriptor caused by a bad DVD burning using growisofs. The DVD is not physically damaged. I tried to recover the data reading directly from /dev/hdc but it throws an input/output error. I believe the error is caused by the broken volume descriptor. That's why I'd like to know a way to make a low-level DVD image that doesn't use the volume descriptor.
Once I have the image I'll manage to recover the data, but now i can't access anything at all. By the way, i've already tried all this programs and anyone worked:
CD-DVD Data Recovery
JuiceSoft Bad CD DVD Recovery
burnaware
[code]....
View 5 Replies
View Related
Jun 6, 2010
I created a encrypted volume on top of software raid1. These are my steps:
1. Create logical partition on sda
2. Create logical partition on sdb (same size)
3. Change type to partition to 'fd' for both partitions
4. Check that the both partitions are same size and type
fdisk -l /dev/sda && fdisk -l /dev/sdb
5. partprobe
6. Make sure there are no remains from previous RAID installations on /dev/sdb by running:
mdadm --zero-superblock /dev/sda6
mdadm --zero-superblock /dev/sdb6
7. mdadm --create /dev/md4 --level=1 --raid-disks=2 /dev/sda6 /dev/sdb6
8. watch cat /proc/mdstat
9. update mdadm.conf
mdadm --examine --scan | grep mdx >> /etc/mdadm.conf
10. Load twofish module
[root@localhost ~]# modprobe twofish
11. # cryptsetup -y -c twofish-cbc-essiv:sha256 create ftdata /dev/md4
Enter passphrase:
Verify passphrase:
12. mkfs.ext3 -b 4096 -R stride=8 /dev/mapper/ftdata
13. mkdir /ftdata
14. Mount the encrypted volume: mount -O noatime /dev/mapper/ftdata /ftdata
It mounts successfully this first time. When I cd /ftdata, I can see the lost+found dir
Now, I unmount the volume
cd ~
Code:
umount /ftdata
cryptsetup remove ftdata
And now, if I try to setup my encrypted volume like this:
Code:
[root@localhost ~]# cryptsetup create ftdata /dev/md4
Enter passphrase:
mount -O noatime /dev/mapper/ftdata /ftdata
I get this error:
mount: you must specify the filesystem type
[Code].....
View 1 Replies
View Related
Jun 6, 2010
I created a encrypted volume on top of software raid1. These are my steps:
1. Create logical partition on sda
2. Create logical partition on sdb (same size)
3. Change type to partition to 'fd' for both partitions
4. Check that the both partitions are same size and type fdisk -l /dev/sda && fdisk -l /dev/sdb
5. partprobe
6. Make sure there are no remains from previous RAID installations on /dev/sdb by running: mdadm --zero-superblock /dev/sda6 mdadm --zero-superblock /dev/sdb6
7. mdadm --create /dev/md4 --level=1 --raid-disks=2 /dev/sda6 /dev/sdb6
8. watch cat /proc/mdstat
9. update mdadm.conf mdadm --examine --scan | grep mdx >> /etc/mdadm.conf
10. Load twofish module [root@localhost ~]# modprobe twofish
11. # cryptsetup -y -c twofish-cbc-essiv:sha256 create ftdata /dev/md4 Enter passphrase: Verify passphrase:
12. mkfs.ext3 -b 4096 -R stride=8 /dev/mapper/ftdata
13. mkdir /ftdata
14. Mount the encrypted volume:
mount -O noatime /dev/mapper/ftdata /ftdata
It mounts successfully this first time. When I cd /ftdata, I can see the lost+found dir
[Code]....
So why is it that I can't mount my encrypted volume after the first time? I am giving the correct password when it asks to.
View 3 Replies
View Related
Jun 30, 2010
I have two internal hard drives.I just installed Debian Lenny in the smaller 80GB. But when I try to access the other hard drive it shows:
"Invalid mount option when attempting to mount the volume"
info:
-The 80GB is on dual boot with Windows 7 and Debian Lenny.
-The 500GB secondary hard drive is NTFS filesystem.
View 1 Replies
View Related
Feb 11, 2010
my old 80gb pata HD showed a dual boot Ubuntu - XP on startup, although ubuntu never worked, onlly XP booted.
Recently I tried to Restore a Macrium backup on one of its two partitions, & spoiled something.
On boot up it says:-
GRUB loading stage 1.5
GRUB loading please waite.....
Error 22
I tried to reinstall Ubuntu 10.8 with no success, & also XP with "R" for repair again with no success.
View 1 Replies
View Related
Dec 25, 2009
I was testing a bug in F12+Acer Aspire One and its 'suspend' feature (you can probably find the thread) and I ended with my SDHC card messed up. I formatted it as ext2 (or ext3, don't remember exactly) and apparently its superblock got corrupted. For one thing there is a single file I want to recover from the card (I don't mind formatting it afterwards). I am no expert using e2fsck or fsck, that's why I am asking here. In addition I used the "dd" command to create a backup of the drive in a file (so I can start tinkering with it). What is the best course of action to recover my files? Either from the card or from the image?
View 3 Replies
View Related
Dec 25, 2010
I have a problem in my ubuntu 10.01 that it can't load a drive/volume in ubuntu. When I tried, it said: "Unable to mount location Error mounting: mount: /dev/sda1: can't read superblock". And when I boot my pc with 'Windows', it said : "UNMOUNTABLE_BOOT_VOLUME" under a blue screen. What can I do to solve this problem?
View 9 Replies
View Related
