I have a WD external HD that I had set up with Mandrivia 2010. It worked fine, could read and write to it no trouble. Then I switched to Suse 11.3 and it says I do not have permissions any more to do anything but read. I have logged on as superuser (root) and tried everything. It will not change file or even drive permissions...
View 4 Replies
every time I paste any file in the windows D ntfs partition there's an annoying message it wasn't able to change the file properties, why does this happens from using kubuntu only but not from ubuntu?
View 3 Replies View RelatedI'm having a problem with the authentication window, if I want to change system properties. There are two buttons cancel and authenticate, but nothing happens when I push authenticate.
View 4 Replies View RelatedI am not the best with Linux but at the same time like to think I am not the worst, Anyways like stated above my dvd drive is saying its read only and i would like to make it read/write here is some info:
*-disk
description: ATA Disk
product: ST3500418AS
vendor: Seagate
physical id: 0.0.0
bus info: scsi@0:0.0.0
logical name: /dev/sda
version: CC46
serial: 9VMRTLT1
size: 465GiB (500GB)
Capabilities: partitioned partitioned:dos
Configuration: ansiversion=5 signature=0005ce96
*-cdrom
description: DVD reader
product: DVD-ROM SD-M1612
vendor: TOSHIBA
physical id: 0.0.0
bus info: scsi@5:0.0.0
logical name: /dev/cdrom
logical name: /dev/dvd
logical name: /dev/scd0
logical name: /dev/sr0
version: 1806
capabilities: removable audio dvd
configuration: ansiversion=5 status=nodisc .....
i needed to change my external hard drive's file system from ext3 to fat32, to use it in windows, which i did the simple way: i shrunk the ext3 partition, made a fat32 partition, copied the files over, removed the ext3 and made the fat32 bigger. unfortunately, while gparted was making the partition larger, my computer shut down. i lost all my files and the partition messed up immediately. i made a new fat32 partition, after deleting the old one, but noticed that gparted was showing 100 gigs already in use (???). so now i have a 300 gb hard drive with only 200 gb i can use; i ran df to make sure gparted wasn't messing up, but indeed it shows the partition as being only 200 gigs in size. i haven't tried making any other kind of partition yet, such as ext3, for fear of losing my files again, and because it wouldn't be permanent anyway, because i need those files in windows and stupid microsoft won't make their OS ext3 compatible.
View 2 Replies View RelatedIn gnome-network-properties I've set up two proxy locations: default and remote.
It's a bit of a fag having to change between them via the gui depending on where I am. Can the proxy be changed by command line because then I can set up a script to use the right proxy automatically? - e.g. use remote proxy if my mobile is connected via usb.
Had a google but don't think gnome-network-properties has command line options so I might be approaching this from the wrong tack.
When right clicking a song in Rhythmbox and selecting properties I should be able to change the name of the album for example. However I am able to select the content of the field I am not able to alter it.
View 1 Replies View RelatedIs there a way to move the side and or top task bars as well as change there properties (auto hide). I know how to add programs to the side bar but can't figure out how to change the top bar menus. When I ran 32bit thru a windows vm I had a top bar where I could access the programs and no side bar. I liked it better than the 2 bar setup in my 64bit wubi install. Can it be changed?
View 3 Replies View Relatedi borrowed an external hard drive from my friend to back up a load of stuff on my windows partition before reinstalling it. I am doing this through ubuntu. I am trying to zip up folders like My Documents etc and chuck them on the external hard drive but it always comes up with errors to do with read/write permissions. In the permissions tab on the folder properties of the ext hard drive it says I am owner but i have no file access (only folder access is create and delete files). When i try to give myself read/write permission it just goes straight back to nothing when i look at it again.
View 2 Replies View RelatedHow can hide it ?Or unless to request a password?I want to do this because Sometimes My cousins use my PC and I don't really want to set an account for each one so I let them use the mine.Problem is I have important files that i don't want to hide but to make them unerasable (I doubt that word exist though)I mean to not let them erase them but some are pretty clever and they Know of the properties option so they can change the attributes.
View 5 Replies View RelatedI have an external hard drive with an xfs partition on it. It was using an external journal, but in re-installing Slackware I removed the partition holding the external journal, forgetting what it was at the time. I didn't touch the contents of the external hard drive, but now I can't mount it and the various xfs programs seem to demand that it be mounted in order for them to change anything.Anyone have any ideas on how to change an xfs partition from external log to internal? Failing that, how do I get the information off it?
View 1 Replies View RelatedIm trying to run a program but my system won't let me.i used to be able to run executable files without a problem but i can't anymore when i double click the file i get "there is no application installed for executable files" i am unable to check "allow executing file as program" in file properties there is a script file which runs the program but all i get from the terminal is "permission denied"
View 14 Replies View RelatedRecently when I try to see the properties of any file in nautilus (3.14.1), the program show this error message before the file properties GDBus.Error:org.freedesktop.Tracker1.SparqlError.Internal: Error opening database
View 0 Replies View Relatedi've recently switched from windows to fedora 15.....in windows i used to use "ALT+ENTER" to view file properties like size etc. what is the shortcut for the same in fedora 15....?
View 7 Replies View RelatedI'm having trouble finding the correct modifiers to the stat command to print out the file/folder properties in human readable format. I would like to run a command on a given file or folder and have the file size in kb, mb, or gb size as opposed to byte size in addition to other pertinent information.
View 2 Replies View RelatedI am unable to access the File Management properties.I go System > Preferences > File Management.I get a "Bug Buddy" window (I filed a report, details below).Or, it also happens if I type: 'nautilus-file-management-properties' in the terminal.
View 3 Replies View RelatedRkhunter file properties changed
View 2 Replies View Relatedsince yesterday when I open up an explorer style window, say I browsed folders in Gnome for each folder it opens a new window. However; when I go to change it so it does it in the same window either through edit properties or system/preferences/file management it does not open and instead a bugzilla window opens as it crashes (taking my desktop with it until it refreshes)
View 2 Replies View RelatedI am newbie in openSUSE as still in transition from windows OS. How to display file properties (details other than size, date, permissions, owner, group,type) using file manager applications similar to Dolphin, Konquerer, etc. I have heaps of files ported from windows environment where I used to store descriptive subjects in one of the file properties field. In windows environment, I would have used file manager such as explorer to display the selected file properties field when searching for particular file before opening it. I know openoffice supports the file properties feature but unfortunately it would appear Linux OS currently does not have a file manager application ready to display these information.
View 9 Replies View RelatedI have a newly installed Kubuntu 10.04 running here, works fine except for one thing.
I have a kind of "fileserver" and it has a samba share that I have mounted in the home folder of my desktop computer ("/home/xxx/fileserver", the server is running an older version of Ubuntu, can't exactly remember what it is but the filesystem is ext2, if that's of any importance).
I have large files on the server, mostly video. When I use Dolphin (or Konqueror, doesn't make any difference) and right click one of these large files and choose Properties, it takes a LONG time to load the properties window. As if it copies the file to local hd before opening properties, or something.
The reason why I posted here and not in the networking section is, that I had the exact same setup with my previous installation which was Kubuntu 8.04, and also at least three different Ubuntu's before that. Never had this problem before, so I think my server and networking thingies are okay.
I'm brand new to Linux and Ubunto 10.04.On the menu bar at the top of my desktop I seem to have attracted some kind of bug!The Log Out Symbol repeats itself across almost the entire menu bar and I cannot remove it. If I remove other buttons from the menu the space is immediately replaced by more Log Out Buttons.When I hover on the icon I get the message 'Log out of this session to log in as a different user' and when I right-cllick to click on 'Remove from Panel' or 'Move' nothing happens.It is not possible to right-click on another part of the menu bar to change the Menu Properties.
View 1 Replies View RelatedI am trying to sort image files I've assembled for document production, and I need to be able to see the height and width of the images without having to open them one by one. Is there a way to view an image's physical size in the folder window?
View 1 Replies View RelatedI am trying to set up a usb weather station (WMR100) on my SUSE 11.1 system. It appears as /dev/hiddev0 (and /dev/hidraw0) when it is plugged in with:
crw-rw---- 1 root root ...
It is the only hiddev device that appears in /dev
I have added this to /etc/udev/rules.d code...
(I will add idVendor/Product values later)
The above successfully sets the access codes for hiddev0 when examined from command line (crw-rw-rw- ...). However, the file browser is fine until I look at the properties for /dev/hiddev0 when it hangs - showing nothing.
Can anyone shed light on this - especially as to if I have done something wrong or this might be a 'bug'
I plugged in my external dvd-r (asus) via usb. It showed me some message on shell, that it has detected the cdrom(although its dvd rom as well but nevermind) and its of ASUS. But how do i know which dev it was associated with in /dev/? Since i had to test something, i plugged it out, and save the output of ls /dev/ > ~/result.txt
after plugging the dvd-rom, i compared the results and was able to find that it was associated with simple cdrom i.e. /dev/cdrom. I wanted to know that is there any command that will tell me which /dev/ file was associated with external dvdrom? i tried to see in the following result
1) df -h ( no results, just the already mounted partitions)
2) fdisk -l ( same as above)
3) dmesg | tail (shown almost the same result as was shown on shell at the time of plugging the dvd)
Code:
cat ${SOURCE}/{start,universal,index,end}.txt > ${SERVER}/index.html
cat ${SOURCE}/{start,universal,02042010,end}.txt > ${SERVER}/02042010.html
[code]....
I have a problem with showing localhost (my website is on it) on the internet, so that everyone can see it. On Windows all you have to do is:open httpd.conf change ServerName 127.0.0.1 for your own IP and it works.On Linux there is is empty httpd.conf, and configuration file apache2.conf doesn't have any address to change.It looks like, that I have to enter my IP somewhere or some of my settings are wrong:first computer (vista) second computer (ubuntu 9.10), cable net providerwhat I did:-activated DMZ, in my router settings and added Host IP Address: 192.168.1.100 -active dhcp (no changes)Windows side:in TCP/IPv4 instead of automatic ip and dns I have entered my own:
Address IP: 192.168.1.103
Mask: 255.255.255.0
Gateway: 192.168.1.1
[code]....
I have a phone with a removable media card plugged in and loaded some music onto it. i just went to delete everything and some of them would not delete saying they were read only and i dont seem to be able to change the permissions.
View 2 Replies View RelatedI'm trying to change the permissions of my external USB drive that i've plugged into my machine. It still reads user root and group root. I've tried chown -R kuier /home/kuiper/file Then chgrp -R users /home/kuiper/file But it still doesn't change permissions. I've also tried editing /etc/group and adding my name to plugdev group. nothing seems to be working?
View 1 Replies View RelatedI'm new to Ubuntu Linux but have many years on windows platform. Please can someone help me with how to change the following items.
No.1 I would like to change the HORRIBLE!! YAK!! brown background color behind the word Ubuntu in the start up screen when the machine loads up (before the login). I have located the image file for this which I have found to be: /usr/share/images/xsplash/bg_2560x1600. jpg but the OS says that root is the owner and that I don't have permission to change this. So how can I change this for a color I do like.
No.2 I would also like to change the login dialogue screen style. I know this is possible but again I'm fumbling to see how I can do this. I have tried with the start up manager but every attempt fails, the settings don't take. Once again I suspect permissions are at the bottom of the problem?
No.3 Would like to have a colorful splash screen image on boot up, I've managed to remove the old one (small white 3 ring ubuntu logo on black background) but havent been able to install or replace with a new one. Its been incredibly frustrating, I'm feel sure I'm missing something simple here. Wondering if its permissions yet again?
Anyone who can offer help on any of the above, guidance or advise me would be much appreciated. Please bear in mind that I'm still very much feeling my way with Linux so keep it simple.
What config file do you change to change default run level???
View 3 Replies View Related
