I'm trying to change the permissions of my external USB drive that i've plugged into my machine. It still reads user root and group root. I've tried chown -R kuier /home/kuiper/file Then chgrp -R users /home/kuiper/file But it still doesn't change permissions. I've also tried editing /etc/group and adding my name to plugdev group. nothing seems to be working?
View 1 Replies
My mac osx hard drive does not boot anymore and I would like to get my important files off before I reformat the hard drive. I have run into a bit of an obstacle -- there seems to be some permissions setting that are barring me from accessing the files I need to. I can see the Machintosh HD and can access some files. How do I change permissions for the entire drive and all it's directories?
View 13 Replies View RelatedI have a problem with my external hdd, I mounted it manually and in the mount table it says ive got rw permissions. But when i try to change permissions it says:
chmod: changing permissions of `whatever': read-only filesystem.
This is my mount table:
[root@localhost ExtHDD]# mount
/dev/mapper/VolGroup00-LogVol00 on / type ext3 (rw)
none on /proc type proc (rw)
none on /sys type sysfs (rw)
[code]....
I've got two external drives that are using ext4 that for whatever reason, I just can't seem to write too. I've changed the permissions on the drives using chmod so the permissions are "drwxrwxrwx". I can even right click within the drive and click "Create New Folder" but then it tells me, "Error while copying to "sdc1". The destination is read-only." I thought the destination permissions were setup so anyone can read/write to the disk? I haven't been using linux that long and have only recently started to feel comfortable to move over all of my stuff to Fedora.
View 6 Replies View RelatedI am using sun micro system. We have installed fedora in that. I want to know how to give R/W permission to a external hdd...
View 1 Replies View RelatedI tried two times to make an new partition (after the FAT partition on it) on my external hard drive with YaST>Partitioner.Fist I had tried ext3 now I have ext2 on it.Both times the partition (or the corresponding folder in /media) was only writeable to the superuser/root but not to a normal user (readable to the normal user). Root is the owner.The FAT-Partition on the same external drive is owned by the normal user who was logged in as I plugged the USB-cable in.I can unmount both partitions als normal user in natilus.1. Can I start nautilus as root to change the permissions?2. What have I done wrong? Should I use an SuSE Live-CD or an CD with an special partitioning-program instead?ng X20) openSuse 11.1 and Gnome 2.24.1 (mostly, 1 account is using KDE) and Kernel Linux 2.6.27.45-01.1-pae. "/home" is on an separated partition (as part of an extended partition). I have also 2 NTFS partitions for Windows XP (System and Data), and a FAT, a root (/) and a swarp partition.
View 9 Replies View RelatedI just installed a usb card reader for my digi camera...how can I change the permissions from "root" to "user" so I can write to this flash drive?
It reads my pix just fine, but it won't let me write....
it is installed at /media/usb0
I am having a few security issues with fedora15. they are like i cannot modify any folder in orher partitions of my HDD unless i am a root user. i have tried the GUI approach bt it doesnt help. there are more than a few hundred folders with thousands of files in total. tell me a way so that i can change permissions for one drive at once.
View 4 Replies View RelatedI had an old windoz 2003 server running a few recreational web sites. I've grown tired of all the hacking attempts, FTP floods, etc. Ok.. I've grown tired of windoz period.When I set the server up, I had the operating system on one physical drive and stored all of the web files on a separate physical drive just in case I ever wanted to make some changes to the operating system.in my adventurous ways, I've dumped windoz and installed ubuntu 11, 32 bit server edition on this machine. It is running fine from what I see on the server side. The first problem I've noticed is when even attempting to navigate to localhost through the server's web browser, I get a permissions issue.
So... off to the drive where the httpd.conf file points to. This is the second physical drive. When checking permissions and attempting to change them to the correct ones for the folder, I can't change them. I've tried through the GUI and the terminal as root. Neither way will change the permissions.I've stepped back and checked the permissions on the physical drive the files are stored on. I am having the same issues with the drive itself. How in the world can I change the permissions either on the drive or the folder? Is there something I should do as far as the drive's mounting?
I'm running Opensuse 11.2 and am using a couple of USB hard drives to store large data. One of these drives is formatted with FAT32 and one with NTFS. When I plug-in a USB device KDE4 shows me a little pop-up asking what I want to do with it, I select to open it in Dolphin which of course automatically mounts it.
My question is what if I want to change some of the mount options - is this possible without reverting to manual mounting? And second question is what system does it use to automount - Fedora, Debian and Ubuntu are all deprecating HAL in favour of pure udev, is this the case in Opensuse too?
HALRemoval - Debian Wiki
https://wiki.ubuntu.com/Halsectomy
Features/HalRemoval - FedoraProject
Every time I try to change file or folder permissions on a separate internal drive in ubuntu 10.10 desktop in sudo file manager, It sets it right back to the way it was before and doesn't save the permissions I want to change it to. The files aren't critical system files that are not even existent on this hard drive.
Its on a completely separate drive, Yet aren't I suppose to be in control of what gets changed to what? Instead of a Operating System doing something just for my safety? A simple AVI files permissions being changed shouldn't hurt anything. How to I stop ubuntu 10.10 from auto setting the permissions of my folders and files? Its really starting to me off right now. I've been looking around on google for Auto reset permissions for ubuntu, Haven't found one word about it. Yet I'm just going to assume someone might know how to resolve this? Or has dealed with this before.
I'm just trying to Forcefully set my folders on my separate drive all to 777 because they are all 775 and 755 and I can only access them with Write privileges if I run the SUDO file manager which I really hate having to do every so often I'm sure you can relate to how annoying it is to have to open up terminal and type something in to open a fully priviledged file manager.
i borrowed an external hard drive from my friend to back up a load of stuff on my windows partition before reinstalling it. I am doing this through ubuntu. I am trying to zip up folders like My Documents etc and chuck them on the external hard drive but it always comes up with errors to do with read/write permissions. In the permissions tab on the folder properties of the ext hard drive it says I am owner but i have no file access (only folder access is create and delete files). When i try to give myself read/write permission it just goes straight back to nothing when i look at it again.
View 2 Replies View RelatedI have an external hard drive with an xfs partition on it. It was using an external journal, but in re-installing Slackware I removed the partition holding the external journal, forgetting what it was at the time. I didn't touch the contents of the external hard drive, but now I can't mount it and the various xfs programs seem to demand that it be mounted in order for them to change anything.Anyone have any ideas on how to change an xfs partition from external log to internal? Failing that, how do I get the information off it?
View 1 Replies View RelatedWhenever I plug an external harddrive to a CentOS system,all partitions mounted will have noexec that makes my binaries or script files not executable.
Quote:
[root@centos52-64-dell ~]# mount
/dev/sda3 on / type ext3 (rw)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
[code]....
I have to remount it using, e.g.,
mount -o remount,exec /dev/sdb1
But I am sick and tired of doing it everyday. What I can I do ?I don't want to use /etc/fstab to solve this problem becauseit will cause booting problem (curable though) when the hard drive is not around.
i needed to change my external hard drive's file system from ext3 to fat32, to use it in windows, which i did the simple way: i shrunk the ext3 partition, made a fat32 partition, copied the files over, removed the ext3 and made the fat32 bigger. unfortunately, while gparted was making the partition larger, my computer shut down. i lost all my files and the partition messed up immediately. i made a new fat32 partition, after deleting the old one, but noticed that gparted was showing 100 gigs already in use (???). so now i have a 300 gb hard drive with only 200 gb i can use; i ran df to make sure gparted wasn't messing up, but indeed it shows the partition as being only 200 gigs in size. i haven't tried making any other kind of partition yet, such as ext3, for fear of losing my files again, and because it wouldn't be permanent anyway, because i need those files in windows and stupid microsoft won't make their OS ext3 compatible.
View 2 Replies View RelatedHow do I change folder permissions without changing the permissions of the files within the folder?
View 6 Replies View RelatedI was wondering, what if you had a flash drive formatted with an FS that has UNIX permissions. Then what if you copied some of your files onto it. And then put it into another computer that has a user account by the same name. WIll the user be able to access the files?What if you named your own user differently on the other computer, will you be able to get your files?
View 14 Replies View RelatedFinally I managed to install my printer/scanner drivers.The last thing I need to do is to add the following two lines to 40-libsane.rules (which is a read only file):# Brother scanners ATTRS{idVendor}=="04f9", ENV{libsane_matched}="yes".How can I change permissions for this file or add these lines without changing permissions?
View 2 Replies View RelatedHow do I set all *.java files in the current directory and all its sub directories to have read permission to all users?
I also want to set all files of at least 1 kilobyte in size in the current directory and all sub directories to have a group of admin.
I am having a USB disk.I want to change the permissions of folder on it from 700 to 755 (and all subdirectories in it)ls -l showstotal 26Quote:
drwxrwxrwx 2 tkmsr tkmsr 2048 2010-02-12 04:12 HPLAUNCHER
drwx------ 7 tkmsr tkmsr 4096 1970-01-01 05:30 vol1
drwx------ 1 tkmsr tkmsr 20480 2011-01-03 17:43 vol2
[code]...
I was trying to change the mounting point of a usb external drive from '/media/disk' to '/media/Movies'
Here is were the stupid part takes over... I right clicked on the desktop icon for the device and selected Properties. From there I selected the Volume tab and in there I changed the mounting point to '/media/Movies' It accepted it and said the changed would take place when I unmounted it and remounted it. However, when I did this it now says it cannot be mounted as it says mount_point contains invalid characters usually /
Unfortunately, now I cannot get back into the properties to remove my error.
If I try to copy a file onto a NTFS partition in Linux, I get a warning message Could not change permissions for <file-name>. Is there any way to suppress this message ? I can live with this message while I copy the files in terminal, but when transferring from Dolphin a modal dialog box is shown and it gets pretty irritating. I'm using openSUSE 11.2, on KDE 4.4 RC.
View 4 Replies View RelatedWhile playing with my Linux box, I edited rc.sysinit in /etc/rc.d/ folder. But now when I boot into run level 3 or 5, I get complain that system cannot run /etc/rc.d/rc.sysinit. I boot into run level 1, and checked its permissions, which is rw-r--r-- . It should be rwxr-xr-x. I tried to use chmod to change its permissions, but it responded that "Read Only file system" Now how can I change its persmissions when in run level 1. In run level 3 and 5, machine does not boot. My box has Fedora Core 2 with kernel 2.6.20.
View 3 Replies View Relatedi have an ntfs mount that i wish to change permissions of individual directories.i have mounted many ntfs volumes successfully, mounting is not the issue. the issue is that when mounting, i need to specify 'blanket' permissions, owner, group etc. i have no idea how to change permissions for individual folders.
View 2 Replies View RelatedI was unable to change the permissions for root node and for other users also. WE have tried all the possibilities like chmod and chmod -R 777 filenem. But we are unable to change that.
View 4 Replies View Relatedany way to change file permissions of NTFS drives? All my C programming files resides in a NTFS drive and I need to set execute permision on them in order to run. I tired chmod -Rv 777 /media/Programming. and also tired chmod 775 *.* after entering the folder in which all my files resides. but both these commands doesn't seem to have any effect on the files. I know NTFS doesn't use Unix file system and chmod command goes in vain.
View 5 Replies View RelatedI finally replaced my Windows with Linux.. However, I need to run applications and modify files that are on NTFS mounts. I am unable to change ownership, permissions, and groups on these files so I may modify them without having to copy. I have several times attempted to chmod, chgrp, chown, etc.. while logged-in as root user; however it is to no avail. The owner and permissions are still geared towards root. can I change ownership and permissions on NTFS files so I can modify them without having to convert/copy them over to ext4 or different file system?- Matbtw: I am using OpenSuse 11.4 and running Windows apps with VirtualBox (with Vista installation image). I still have Win7 on my computer (non-emulated) and I would like to keep some files on those NTFS partitions so when I occasionally need to boot into Win7 I can modify those files because Windows blows and doesn't support Linux.
View 5 Replies View RelatedI've checked out a subversion project with source c++ files in netbeans 6.8 on Red Hat 5.5. My machine has a dual boot with windows xp and RHEL 5.5 so I checked out the project on a folder called winshare which is a shared drive/partition (E: under xp) allowing both operating systems to access the contents. I've Fedora as virtual machine on xp and wanted to be able to work on the source seamlessly whether using fedora or RHEL.
Problem is that Netbeans is able to build the source just fine but I can't seem to run the generated executable. It has -rw-rw---- permission and the owner is the same user logged in (let's say user1) but no matter what I do, whether I change permissions as user1 or root issuing command chmod 777 -R /dir/where/file/is does not have any effect whatsoever on the executable as well as any .cpp or .h files (nothing that I need exectue permissions on .cpp but just to make a point).
My system (CentOs5.3) became erratic after i tried to change wholesale the ownership of the /FS. is it possible to change ownership or rwx permissions of files in linux? what is the safeguard available to preserve the consistency of the program files in linux against such an attempt by su?
View 2 Replies View RelatedI have 2 ubuntu's: 1 on my ineternal hard drive, 1 on my external
When I startup without my ext drive =>GRUB error 21.
And when I plug it in I can choose: the standard ubuntu kernel is the one on my external, and the original one is listed under other...
I'd like to be able to startup without external hard drive and make the ubuntu on my internal drve the standard.
