I am trying to install Wireshark after I "untar"-ed it.This is the first time I am running RH on one of my PERSONAL PC's at home. Do I need to Register my Red Hat OS for "yum" to work? I got this RH cd from work.
View 7 RepliesI have an amd phenom II 9950 125 watt am3 cpu, and 16GB of ddr3 1066 ecc registered 4x4G dimms.I am trying to find a motherboard that works with this memory.I like the reliability of ecc, and I want ot use it.
View 5 Replies View Relatedssh works fine on root but when i log into my other account, the ssh doesn't work, it just times out when i putty it. I used this to try and start it from terminal in my reg acc, and then as the su.
sudo /etc/init.d/ssh start
After that didn't work i did this
sudo apt-get remove openssh-server
sudo apt-get install openssh-server
sudo /etc/init.d/ssh start
and still nothing. I have no clue why it only works on root and no other accounts.
I'm not that new to Linux having used a few other distros but at the same time i am not really 'clued up' and can quickly get stuck. My problem is trying to get an IM program to work with my MSN account. I use this just to keep in touch with family/friends. Pidgin, doesn't seem to have an option to add an MSN account at all. I installed Empathy after using it in Fedora which gave me an option to setup a MSN account but it doesn't connect?
View 14 Replies View RelatedSO i made a server with ubuntu 10.04.
I created 3 new accounts on the linux then made identical samba accounts to match. For some reason when i input the information to log into a shared directory it doesn't work. my original login works fine, code...
not sure why it doesn't work, i logged into the server with my other accounts. is there a step im missing?
Im trying to set empathy up with my msn account. I have added the account but it just seems to lag and take a very long time to do nothing! I haven't been able to connect to my msn account yet. Can someone walk me through how to set up my account?
View 3 Replies View RelatedI reinstalled Slackware lastnight and was configuring Samba today and when I tested the config (I had just copied over my working smb.conf) I kept getting an NT_LOGON error when I run:
PHP Code:
smbclient -l MYSERVER
from the root account after entering root's password.
I can log in through konqueror if I pass the credentials of the only user defined in smb.conf after I'd run smbpasswd for that user, and if I bring up a full terminal session for that user smbclient works fine, but it seems odd that root can't access the shares on the machine. I may have just never noticed this before because I usually test from a user account, but is this normal since I specifically only define one user where samba is concerned? I'm mainly asking because I was getting some unexpected write errors last night while I was installing the multilib libraries for Slack64 as root and I'm trying to verify everything.
I got a request today from someone on the software development team that reads as follows: Quote: According to RFC 4409 client mail submission to an email server is supposed to use port 587. Server to server SMTP relays are to use port 25. When I am not on site, I can't email via my work account via my iPhone or my residential internet because my ISP(s) filter port 25 to only allow traffic to and from their mail servers. They do however allow 587 anywhere per RFC 4409. Just to send this email I am having to relay off my own server in California. get the proper ports opened on the mail server? [URL] So my question now is I'm wondering if my Postfix server isn't properly configured? Right now it's listening on the following ports:
[Code].....
the mail server itself will receive mail, that part works. i'm using dovecot imap to grab my mail, that works. but if i try to send mail from my iphone using an account on that server it doesnt work. this is what i see in syslog: May 15 07:14:52 coax postfix/smtpd[1432]: NOQUEUE: reject: RCPT from mobile-166-137-139-003.mycingular.net[166.137.139.3]: 450 4.1.8 <eppo@customconnexions.com>: Sender address rejected: Domain not found; from=<eppo@customconnexions.com> to=<xxxxxxx@aol.com> proto=ESMTP helo=<[10.25.15.47]>
View 1 Replies View RelatedI was wondering if it would work as regular ram or would it just not work at all.For a MSI PM8M-V 7104 motherboard [URL]I got this PC as a street throwaway. PS was dead.
View 5 Replies View RelatedAnybody else get this message after a recent upgrade to testing (at least)?
Setting up portmap (6.0.0-3) ...
Starting portmap daemon....
There are RPC services which were registered with the portmapper before the configuration was changed. You need to manually restart them in order for the changes to take effect. Current registered services:
[Code]....
My ISP doesnt provide a client for linux However theres a login form on the browser which they provide which helps connecting my account and logging in into it.Thus starting the internet. Now the problem is of machine id. Whenever I try logging in through Ubuntu it says "your machine ID is diff from the one registered with us"
This problem doesnt come with my WinXP. Are the machine IDs diff for Ubuntu and winXP? How can I make them same?to edit the ubuntus to make it same as winxp? I cant you internet on Ubuntu because of this!
I ordered my VPS but my domain name that I registered my VPS with is with another host. So obviously I have to update the nameserver options there. How can i find out what my nameserver settings on my vps? I'm using webmin.
View 3 Replies View RelatedI already setup my samba, openLDAP as well as smb-tools but when I try to registered my winXP client into Linux Domain,there was an error "a device attached to the system is not functioning" but browsing of user folder is possible, by typing in run command \server1 then provide a username and password.I can also transfer some documents on that folder, only registering from linux domain is my problem...
View 2 Replies View RelatedDo I have to have my system registered with the RHN to receive updates, or will I still receive updated without it being registered?
View 5 Replies View RelatedTest 9 brings up this error:
Code:
Test 9: ERROR
--------
Akonadi control process not registered at D-Bus. Details: The Akonadi control process is not registered at D-Bus which typically means it was not started or encountered a fatal error during startup. How can I solve this?
F10 x86_64
akonadi-1.0.0-4.fc10.x86_64
mysql-5.0.67-2.fc10.x86_64
I get this error when starting kmail in new ubuntu 10.10.
View 4 Replies View RelatedI remember having the same problem with kde/Fedora a few years back, and I can't remember the solution. Trying to open any attachment in evolution gives the error "No application is registered as handling this file" and you have to save the attachment, and then open it as normal. I have checked all the file associations, and they are fine, and the same attachment in evolution under Gnome opens fine.
View 5 Replies View Relatedit get hanged on NET:Registered protocol family 2
View 1 Replies View RelatedI already setup my samba, openLDAP as well as smb-tools but when I try to registered my winXP client into Linux Domain,there was an error "a device attached to the system is not functioning" but browsing of user folder is possible, by typing in run command \server1 then provide a username and password.I can also transfer some documents on that folder, only registering from linux domain is my problem...
View 1 Replies View RelatedI have a problem with the Google search box top right corner in Konqueror, when entering search I recieve an error page "Unsupported Protocol" Google asks for ioslave or kioslave. Also when highlighting text on a page and right clicking with the mouse no search option is given. I created a new user and all works as it should for the new user. What is wrong with my user account? I have reset default values in Konqueror setup.
View 3 Replies View RelatedI have like 4 email addresses on one Ubuntu One account and I'd like to remove them all except my current email... I also have an old account I'd like to delete. I used the contact form but to no avail.
View 2 Replies View RelatedI have a squeeze net install cd I downloaded and have used to install on two computers. Now I try to install on a third computer, install seems to go well, but when I try to run it, I get the message about 'driver' pcspkr already registered. Then CRASH. So, I wiped the HD and tried again; same result.
I figured the cd might have been corrupted so downloaded and burned another. This time I downloaded from a different mirror. Same result. I don't know what this pcspkr is all about; I don't even own any pc speakers. The computer on which this happens runs Lenny on another HD.
How do I install registered version(3 user) of Kaspersky 10?
View 1 Replies View RelatedI'm using Ubuntu 10.04, and I'm trying to VNC into my Ubuntu box from my MBP. I can connect just fine, however, I am unable to register any mouse clicks or keyboard input on the resulting desktop. I'm launching it as follows: x11vnc -nomodtweak -scale 9/10 I can log in using my Windows box and UltraVNC and use input with no problem.
View 6 Replies View RelatedIm currently using kernel version 2.6.33.3 and i have recompiled. I have bought a serialboard(PCIe 7800) from addi-data and im not sure whether it is properly installed.
When i type in "cat/proctty/drivers", the listing contain a line:
When i type in "lspci",
From my card distrubutor, 7013 means it is APCIe-7800. meaning my system identified the board correctly. why is there an "Unknown" word in the line?
When i type "dmesg", it only shows i have 4 ports,
And i dun have the identification of the PCI slot in which the board is plugged from these "dmesg" command which are usually type MMIO.
I want to watch some videos at iTunes U from MIT, but my browser says, "itms is not a registered protocol". Is there some way I can still access the videos, say with wget?
View 2 Replies View RelatedDo you think there is a way of accessing different user data from another account which I have set up.
Ie. user 1 = account has messed up
user 2 = account works fine
access user account 1 home directory from user 2 work space?
I recently installed Lenny 5.0.3 i386 onto an old HP XE783 box. I've got a couple of errors that pop up on boot, and I'm not sure how to troubleshoot them. A couple of the lines from /var/dmesg that strike me:weird, boot CPU (#0) not listedby the BIOS. ACPI Error (dsopcode-0595): Field [ALB2] at 120 exceeds Buffer [CRSA] size 104 (bits) [20080321] {along with two other ACPI Errors (psparse-0530): Method parse/execution failed; and (uteval-0233): Method execution failed.}.Error: Driver 'pcspkr' is already registered, aborting.
The most annoying thing (I think) has to do with the ACPI errors: the box won't power down after issuing a shutdown command; it bumps into single user mode then prompts for the root PW.
i have ubuntu 9.10 karmic koala and then upgraded to 10.4 lucid lynx.in karmic my playTV pro3 can works but after upgraded to lucid my FM tuner doesnot detected.my pixelView playTV pro 3 can works in Xp Windows, both TV and FM tuner.
View 2 Replies View Related