Hardware :: Nvidia 9400GT DVI-I To Component Adapter Not Working?
May 29, 2009
I am using a NVIDIA 9400GT video card on the latest Ubuntu. I believe the video card is a DVI-I port because it has the correct pin settings - [URL] I am using this DVI to Component adapter - [URL] The adapter is marked with Y Pb Pr above the RCA jacks. So it is analog and the vido card port is DVI-I ... all is correct ...
I am connecting to a DYNEX DX-LCD22-09 TV with HDTV component cables. The TV accepts both YCbCr and YPbPr signals. When I first boot the linux box there is no signal. Then right before it auto logs in I get a picture that is all green on the right side, black everywhere else and the TV displays it is at 1280x720 60hz. Finally the screen goes blank when the machine logs in - no signal! I have tried all combination of the adapter settings and have looked over the component input and output cables many times to insure I have it setup correctly.
View 3 Replies
ADVERTISEMENT
Apr 19, 2010
I reboot my xwindows won't come up I have tried to to init5, I am lost sorry still trying to get up on my linux all the way. If anyone can assist me or help me uninstall completely in command line would be.
View 6 Replies
View Related
Jan 8, 2010
I downloaded drivers for my nvidia geforce 9400gt for linux, ran it in terminal and it said failed because i have to run it as root. how do i go about doing so?
View 8 Replies
View Related
Aug 12, 2010
I am running fedora Fedora 2.6.31.5-127.fc12.i686 - works fine, but it puts my display adapter in old fashoned simple vga mode.
DISTRIBTION
Fedora 2.6.31.5-127.fc12.i686
Mysql 5.1.47
Apache 2.2.15
CONFIGURATION
1.25 ghz AMD athlon
NVIDIA RIVA TNT display adapter
ECS K7S5a board / chipset
AMD BIOS 07.00T
512 mb main mem
128 kb primary cache
256 2ndary cache
66 mhz bus clock
I use the bios to dual boot between two disks, (1) this op sys and (2)win98se - where I have a driver that fully supports the nvidia.
The disadvantage to my current situation is that there are some programs - eg Evolution - that assume I can see more than you see with this setup - eg the buttons at the bottom of the screen do not appear and i have to do a trial and error tabbing to get what i want. I just downloaded openoffice and i see that it wants 1000x2000 or so. Thus I wont even try to install it unless i can resolve the adapter thing.
I'm very happy with this fedora - use it for software development. But as I become more fond of it, I would like to use it instead of windows - which I can't unless i can see the whole screen
At one point - in response to a suggestion that I download security updates - I did so and got 2.6.32.12-115.fc12.i686. It was incompatible with my config - put up a screen that looked like a tv test pattern and went into a loop. So I went back to 2.6.31.5-127.fc12.i686.
View 8 Replies
View Related
Apr 19, 2011
I am trying to get my bluetooth adapter to work in RHEL. The adapter is a Kensington Micro (K33902US). The system detects the device, but it fails to find any networks when I do a scan using hcitool. Also, I wrote a small C program to do the same, with the same results (no network found). The bluetooth manager appears in the panel, but when I right-click, the only option I have is to check/uncheck "Discoverable". I have tried restarting bluetooth using "service bluetooth restart" to no avail.I tried borrowing an adapter from a friend (some DLINK) that seemed to work fine for both hcitool and my program. The problem just seems to be in Red Hat's ability to use this particular device.
View 1 Replies
View Related
Sep 18, 2010
I installed it on a Dell Inspiron 531 with the GeForce 6150SE nForce 430 built in video card. From the recommend driver list I installed �NVIDIA accelerated graphics driver (version current) [Recommended
Well, turns out it should not have been recommended. I had restarted and all I got was a low res ubuntu logo and a boot right into a full screen terminal. Tried startx and got a no screens found, I look online for about an hour last night and decided to just reinstall, which takes a couple hours when installing all the packages.
I have done more research today and found to install the latest linux x64 driver from nVidias website, which I did, but it does not run. I followed some more instructions and it said to do a �sudo chmod +x <file>� which I did, and it starts to open and I get �You appear to be running an X server; please exit X before installing.�
I�m starting to get a little frustrated here, guess I�m just used to a lot of the ease of windows and assumed that something like installing a graphics card driver would be easy.
View 3 Replies
View Related
Aug 27, 2010
Is there anyway to get this adapter working with Ubuntu 10.04 at all?
View 1 Replies
View Related
Apr 18, 2010
have no way of knowing if I am connected to my wireless network. The straw that broke the Camel's back was last night when for one reason or another, the connection was dropped, and I had no way of knowing it. I messed around for 3 1/2 hours changing software settings, and running in circles. I finally decided to just reboot the system, and the connection came back.I still had no way of knowing that.
Had the LEDs on my notebook adapter been working, I could have saved myself hours of frustration and aggravation.I am still so ticked off over that, I'm to the point that if this can not be corrected, this may very well be the end of my using Linux.I assume this problem will arise from the adapter card. I took screen shots of everything.Note all of the blank spaces that when clicked on, display LEDs, and nothing more, (led1.jpg)I have taken a screen shot of the properties of each of those entries, (led_properties.jpg).how do I get the LEDs on my adapter working so I know when there is a connection, and when data is being transmitted and received?
View 12 Replies
View Related
Apr 26, 2011
i have dell inspiron n4010 having widdcomm bluetooth device and i am using fedora 14. it shows bluez-daemon not working when i start kbluetooth and it shows bluetooth adapter not detected.
View 6 Replies
View Related
Jun 30, 2010
I bought a USB adapter for my wireless connection at home. But there is no drivers for the adapters in ubuntu, there is only windows executable files. I am using ubuntu 10.04. I spend around 40$ for the adapter. Some one please help me how to work this out. Its NP910n netcomm adapter. I am using ubuntu10.04.
View 1 Replies
View Related
Aug 7, 2010
So I bought a linksys wireless-g usb adapter for my desktop because I don't want an ethernet cable running halfway around my house to the router (the router can't move from that location).
it comes with a windows setup disc which i obviously can't use in linux so i just plugged it in and hoped for the best. It seems to turn on, the little light flashes, and I tried connecting to my wireless network in the network manager (using 10.04, gnome), but it just seems to be retrying to connect and every 5 minutes it asks me for the password which I've given it already.
View 9 Replies
View Related
Aug 26, 2010
As the title reads. My wireless adapter does not work when I boot from the Ubuntu 10.04 LiveCD. The adapter in question... tricky. It's this one: [URL]...- however, aside from a mention in one of the comments to a "Ralink RT2780", I don't see any reference to a make/model.
The software that ships with this product is indeed Ralink-branded, but again there's no mention of a specific make/model. So I assume it's just a driver issue, however I've no idea where to begin in my search for one as I can't identify its model number.
View 9 Replies
View Related
Jan 18, 2011
I've been reading some of the previous threads but still have not been able to make the adapter work. Here's where I got stuck. I was able to install ndsiwrapper and the GUI. I found the driver (net8192su.inf) on the disk which came with the adopter and installed the driver using the GUI for ndsiwrapper. Unfortunately I get a message "invalid driver" after I installed it?
View 7 Replies
View Related
Jul 26, 2011
Yesterday I installed many updates on my compaq presario cq60-214dx running ubuntu 11.04.
This morning my 2 year old son was pressing buttons, generally playing with the notebook. When he was done the wireless stopped working. I cannot get it to come back on. What could he have possibly done without entering the password.
I have restarted several times. ifconfig does not show the wireless adapter. iwconfig says its not active. i turned on txpower using iwconfig but still nothing.
View 6 Replies
View Related
Mar 10, 2010
Recently I purchased a Linksys WUSB54GCV3 Wireless adapter. I wanted to use this on my xubuntu 9.04 version and kernel version is 2.6.28-14-generic.system. But unfortunately this doesn't support.
View 9 Replies
View Related
May 10, 2009
I have no problems with the sound card, however, when I connect a PD552 USB sound adapter into a 4 port hub in order to use headphones it simply doesn't work. I posted the problem on the Ubuntu site and received a suggestion to run lsusb from a terminal. I did this but never received any other replies addressing the issue. This is what I receive from the command. It shows up as device 7 but I have no idea of what my next steps are to insure it will work.
[code]....
View 8 Replies
View Related
May 29, 2011
I cannot configure my network adapter in backtrack. I just downloaded backtrack 4 and the network adapter a Realtek PCIe FE family controller seem not to be working.
View 1 Replies
View Related
Jun 21, 2011
Overnight, I upgraded from KDE 4.5.1 to 4.6.3 and had a rude awakening this morning when I found that KDE had managed to, once again, break the Task Manager "force rows" behavior which had been fixed a few major releases ago. I found this lovely patch that had been applied:
[URL]
And thus broken the functionality, and I want to recompile that particular plasmoid with the patch removed. However, I am completely unfamiliar with CMake or building anything at all, for that matter. All my programming is done in PHP which means I'm pretty much completely lost. I'm in the midst of pulling down the kde-workspace tree with git, and already downloaded and modified a separate copy of the file in question to look the way it is supposed to. I don't want to rebuild all of KDE, just the one module.
View 2 Replies
View Related
Nov 3, 2010
Anybody know how to get pictures off of one? I've got a computer with XP, but the software doesn't want to work. I've tried setting it up in a VM, but VirtualBox won't patch the camera through for some reason. The SD card adapter it came with stopped working, so that's a no-go.
View 2 Replies
View Related
Dec 16, 2010
I picked up as Dynex usb2serial converter to use with my cisco router/switch. The dongle works fine if plugged into a windows box & puTTy, but I cannot get it to work with Fedora 14. When I try to use cute, mini or command line it tells me it cannot open the connection. Here is the output from lsusb and dmesg. susb output:
[code]....
View 1 Replies
View Related
Dec 22, 2010
I recently got Fedora 14 installed and much to my dismay my Ethernet adapter (Intel 82566DC) didn't work. This is left me disconnected from the internet and made it impossible to install any packages. Googling and searching the forums got me these bits of information: [URL]. From what I gather, the 2.6.35 kernel is at fault. So I can solve this by installing the most recent e1000e ethernet drivers. Long story cut short, it didn't work too well for me. I couldn't simply make+make install it, which demanded other packages to be installed first. These in turn had other dependencies. After several failed attempts and ideas I'm at my wits and end and left with two options:
1. Installing an RPM (hopefully it shouldn't have any dependencies). Is there a site where I can download the driver RPM directly? I can't install and use rpmbuild, because I can't even connect to the internet.
2. Waiting for a newer version of the kernel. How long will I have to wait and how easy will it be to update it, without internet connectivity?
View 13 Replies
View Related
Oct 27, 2010
How would i go about getting my PS2 controller working in 11.3? It's connected via a PSX to USB adapter.
View 1 Replies
View Related
Jan 12, 2010
I have just installed Ubuntu 9.10 on an Acer TravelMate 290E. I've got internet connection through the Ehternet Cable, but when I plug in the D-Link WLAN USB device, although the system recognises it, it is disconnected. How can I connect the WLAN USB device adn get it to work?
View 5 Replies
View Related
Feb 28, 2010
I have been searching for days on end trying to get my machine to detect my Netgear WG111T wireless adapter...and I've gotten absolutely nowhere at all.Most tutorials suggest I use ndigstk(sp?), which allows me to use Windows drivers for my adapter. I've been told many times to use the wg111t.inf file, but all I've been able to come up with is the w11t.inf file. Whenever I start up the Windows Wireless Drivers application, I usually get a popup which tells me "Unable to see if Hardware is detected"--yet when I hit the OK prompt, next to the w11t.inf file, it says "Hardware detected --Yes", yet I still have gotten nowhere. I grasp some basics of Linux, but overall I'm still pretty new to it--and I have a big headache from the whole thing.
EDIT: I forgot to mention, my install is 9.04, so if 9.10 resolves this, how would I go about upgrading without downloading an ENTIRELY new disc (I have a horrid internet connection, it'd take HOURS to download the 699MB ISO, so perhaps make that a last resort)
View 9 Replies
View Related
May 12, 2010
I'm using ubuntu 10.04 (all latest updates are installed) and when I plug my 300N Wireless USB Adapter WL-344 in my computer, Ubuntu does nothing: the light of the stick doesn't burn and ubuntu doesn't see the usb.
View 1 Replies
View Related
Aug 7, 2010
I upgraded to Ubuntu 10.4 on my Dell Inspiron 6400 yesterday (32-bit). Everything was running great, but when I turned it on today my wireless adapter is no longer working and the hardware switch doesn't do anything. It's working in Windows fine so it can't be the hardware.Here is some information:
Adapater name: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
Code:
iwconfig:
wlan0 IEEE 802.11abg ESSID:off/any[code]....
Restarting the network with 'sudo /etc/init.d/networking restart' didn't work.I've tried Ubuntu several times before but usually there is one small issue which makes me go back to Windows. I love 10.4 so I hope I can get this working so I can stay on Ubuntu!
View 5 Replies
View Related
Dec 9, 2010
My TRENDnet TEW 424UB Wireless Adapter does not show up in the network window. The light does work while using Ubuntu but it goes on during Windows. How do I fix this?
View 6 Replies
View Related
Mar 9, 2011
I have just installed Ubuntu 10.10. It is great and all but I am not able to get my wireless adapter working...it is a cheapo one and I have found different tutorials around the internet trying to get it to work...to no avail!
View 1 Replies
View Related
May 5, 2011
It worked with 10.10, but in 11.04 only partially. It would show up in Bluetooth Manager, and I was able to pair with my phone. But after that it always failed to connect. Tried lots of things before I spent $10 on another nameless Chinese one and that worked fine immediately.
View 1 Replies
View Related
Jul 15, 2011
I got my UGA video adapter in, when purchasing it I saw on its requirements that is showed it had linux support. However, when plugged it in and restarting no image but the default green image was shown. All wires are check and are plugged in. However, I am not seeing on the computer monitor and no 2nd monitor is found on the monitor settings. Also I would like to note that according to a little research, is that the usb video adapter uses displaylink. I am using Ubuntu 11.04, classic ubuntu and 2D unity desktop.
View 2 Replies
View Related
