Ubuntu Networking - Basic USB Adapter Not Working In 10.04

Jan 18, 2011

I've been reading some of the previous threads but still have not been able to make the adapter work. Here's where I got stuck. I was able to install ndsiwrapper and the GUI. I found the driver (net8192su.inf) on the disk which came with the adopter and installed the driver using the GUI for ndsiwrapper. Unfortunately I get a message "invalid driver" after I installed it?

View 7 Replies


ADVERTISEMENT

Ubuntu Networking :: Belkin Basic Wireless USB Adapter?

Apr 1, 2011

I had a Netgear Wireless USB adapter that got fried (probably because it was about 10 years old lol). It was a B and used to connect at 54 Mbps, but as it got older, was only connecting at 1 or 2 Mbps and would constantly disconnect and reconnect until it finally died.I went out and bought a Belkin Basic Wireless USB Adapter (Model Number: F7D1101). This one is an N and it connects at 150 Mbps when booted into XP, but when booted into Ubuntu 9.04, nothing shows up. It doesn't turn on, the list of networks isn't there.

Could it be that it's not compatible? I plug in the Netgear B and it shows up, connects and disconnects (because it's fried) and shows me a list of connections. But when I plug in the Belkin N, I get absolutely nothing at all. And I forgot how I connected the Netgear so...?By the way, the wireless router is a Netgear N that I got from Comcast Cable, if that helps in any way? Is there something that I need to do in terminal to "turn it on manually" or something?

View 1 Replies View Related

Ubuntu Networking :: Anyway To Get Adapter Working With 10.04 At All?

Aug 27, 2010

Is there anyway to get this adapter working with Ubuntu 10.04 at all?

View 1 Replies View Related

Ubuntu Networking :: Wireless USB Adapter Not Working?

Jun 30, 2010

I bought a USB adapter for my wireless connection at home. But there is no drivers for the adapters in ubuntu, there is only windows executable files. I am using ubuntu 10.04. I spend around 40$ for the adapter. Some one please help me how to work this out. Its NP910n netcomm adapter. I am using ubuntu10.04.

View 1 Replies View Related

Ubuntu Networking :: Wireless Adapter Not Working / Fix It?

Aug 26, 2010

As the title reads. My wireless adapter does not work when I boot from the Ubuntu 10.04 LiveCD. The adapter in question... tricky. It's this one: [URL]...- however, aside from a mention in one of the comments to a "Ralink RT2780", I don't see any reference to a make/model.

The software that ships with this product is indeed Ralink-branded, but again there's no mention of a specific make/model. So I assume it's just a driver issue, however I've no idea where to begin in my search for one as I can't identify its model number.

View 9 Replies View Related

Ubuntu Networking :: D-Link USB WLAN Adapter Not Working

Jan 12, 2010

I have just installed Ubuntu 9.10 on an Acer TravelMate 290E. I've got internet connection through the Ehternet Cable, but when I plug in the D-Link WLAN USB device, although the system recognises it, it is disconnected. How can I connect the WLAN USB device adn get it to work?

View 5 Replies View Related

Ubuntu Networking :: WG111T Wireless Adapter Not Working?

Feb 28, 2010

I have been searching for days on end trying to get my machine to detect my Netgear WG111T wireless adapter...and I've gotten absolutely nowhere at all.Most tutorials suggest I use ndigstk(sp?), which allows me to use Windows drivers for my adapter. I've been told many times to use the wg111t.inf file, but all I've been able to come up with is the w11t.inf file. Whenever I start up the Windows Wireless Drivers application, I usually get a popup which tells me "Unable to see if Hardware is detected"--yet when I hit the OK prompt, next to the w11t.inf file, it says "Hardware detected --Yes", yet I still have gotten nowhere. I grasp some basics of Linux, but overall I'm still pretty new to it--and I have a big headache from the whole thing.

EDIT: I forgot to mention, my install is 9.04, so if 9.10 resolves this, how would I go about upgrading without downloading an ENTIRELY new disc (I have a horrid internet connection, it'd take HOURS to download the 699MB ISO, so perhaps make that a last resort)

View 9 Replies View Related

Ubuntu Networking :: Not Working: 300N Wireless USB Adapter WL-344

May 12, 2010

I'm using ubuntu 10.04 (all latest updates are installed) and when I plug my 300N Wireless USB Adapter WL-344 in my computer, Ubuntu does nothing: the light of the stick doesn't burn and ubuntu doesn't see the usb.

View 1 Replies View Related

Ubuntu Networking :: Wireless Adapter Not Working After 10.4 Upgrade?

Aug 7, 2010

I upgraded to Ubuntu 10.4 on my Dell Inspiron 6400 yesterday (32-bit). Everything was running great, but when I turned it on today my wireless adapter is no longer working and the hardware switch doesn't do anything. It's working in Windows fine so it can't be the hardware.Here is some information:

Adapater name: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)

Code:
iwconfig:
wlan0 IEEE 802.11abg ESSID:off/any[code]....

Restarting the network with 'sudo /etc/init.d/networking restart' didn't work.I've tried Ubuntu several times before but usually there is one small issue which makes me go back to Windows. I love 10.4 so I hope I can get this working so I can stay on Ubuntu!

View 5 Replies View Related

Ubuntu Networking :: Wireless Adapter Not Working / Sort It?

Dec 9, 2010

My TRENDnet TEW 424UB Wireless Adapter does not show up in the network window. The light does work while using Ubuntu but it goes on during Windows. How do I fix this?

View 6 Replies View Related

Ubuntu Networking :: Unable To Get Wireless Adapter Working

Mar 9, 2011

I have just installed Ubuntu 10.10. It is great and all but I am not able to get my wireless adapter working...it is a cheapo one and I have found different tutorials around the internet trying to get it to work...to no avail!

View 1 Replies View Related

Ubuntu Networking :: D-Link DBT-122 Bluetooth Adapter Not Working In 11.04?

May 5, 2011

It worked with 10.10, but in 11.04 only partially. It would show up in Bluetooth Manager, and I was able to pair with my phone. But after that it always failed to connect. Tried lots of things before I spent $10 on another nameless Chinese one and that worked fine immediately.

View 1 Replies View Related

Ubuntu Networking :: Linkys AE2500 USB Adapter Not Working?

Jul 16, 2011

I am a total Linux noob and I cannot get my Linkys AE2500 USB Adapter working. As far as I know, Linkys does not have drivers for Linux. Whenever I used it with Windows XP, it worked (blue light turned on on the USB Adapter.) Is there any way I can get it working with Ubuntu 11.04?

View 9 Replies View Related

Ubuntu Networking :: Belkin N (MIMO) Wireless Adapter Not Working In 9.10?

Jan 19, 2010

I have just installed Ubuntu 9.10 alongside Windows 7 and it is not picking up my Belkin N wireless adapter?? So I went to go and download the Windows Wireless Drivers (ndiswrapper) software so I can install my adapter and the download center just says "Not available in the current data" and wont let me download it? Also I tried to download my nVidia drivers from software center and it said the same thing?

Never before have I had a problem with Ubuntu until now So can anyone point me in any directions as to how to get these installed???

View 5 Replies View Related

Ubuntu Networking :: Netgear WNA 1100 USB WiFi Adapter Not Working

Jul 9, 2010

Okay I've got a Netgear N-150 WNA 1100 USB WiFi adapter, it doesn't work in Ubuntu it's not supported. There should be a way to make it work with ndiswrapper. I tried and failed before and due to other non related circumstances I had to reinstall Ubuntu. What are the steps to install ndiswrapper and it's dependency's on a fresh Ubuntu installation that cannot connect to the internet.

View 9 Replies View Related

Ubuntu Networking :: Linksys AE1000 Wireless Adapter Not Working?

Feb 16, 2011

I have a AE1000 wireless adapter and Ive been using it or about 4 months on windows xp. Yesterday I installed ubuntu 10.10 and it won't work It won't connect to the internet and won't even show signs that it is turned on.

View 5 Replies View Related

Ubuntu Networking :: WiFi Adapter TP LINK WN821N Is Not Working In 10.10

Apr 17, 2011

WiFi adapter TP LINK WN821N is not working in 10.10, WN821N is notworking.

[Code]....

View 3 Replies View Related

Ubuntu Networking :: Belkin N150 Wireless USB Adapter Rt2870 Not Working?

May 13, 2010

I tried getting a Belkin USB Wireless adapter:N150 to work in a fresh installation of 10.4 with no success. After reading several forum posts I tried both solutions with ndiswrapper and the XP driver and with the Ralink native driver with no luck.

Code:
lsusb
Bus 005 Device 008: ID 050d:935a Belkin Components
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

View 9 Replies View Related

Ubuntu Networking :: Wireless Adapter Not Working After Wlan.conf Update

Jan 19, 2011

I updated Ubuntu to 10.04 after which I noticed the wireless indicator lights on my HP laptop were continually flashing between blue and orange and network performance seemed slow. I did some searching and found and implemented the following change to stop the flashing:

gksudo gedit /etc/modprobe.d/wlan.conf

Copy and paste the below line:

options iwlcore led_mode=1

Since making this change the wireless connection is shut off and I can;t get it to work at all. I first tried simply to remove the change to get back wher I was, but I can;t do that. Can sopmebopdy toell me at least how to get rid of this wlan,conf file ( it was created by the above command) so I can start over?

Coincidentally since making this change my Windows Vista OS fails to start because of errors attributed to a software or hardware change, of which there were none other than the Ubuntu wlan.conf change. . It may be unrelated but I am suspicious of the coincidence. I am running Vista and Ubuntu in a dual boot configuration and all ha run very well until I did the Ubuntu wlan.conf change.

I am now attempting a complete recovery of my Vista system, since it seems irreparably broken. Again coincidence or not?

View 2 Replies View Related

Ubuntu Networking :: Network Adapter Stopped Working And Fails To Start

Feb 19, 2011

I have somehow messed up my network (onboard) card in the process of configuring network settings. how I managed to do so is that I did not use ifdown before making changes to my "/etc/network/interfaces" file. Also I think it might be relevant to mention that the sshd was running -although with no active connections at that time- since I have the service installed on my 10.04 Ubuntu Server (x64). So step by step what I did to end up with no network connection:

1) sudo cp /etc/network/interfaces ~/myfiles/interfaces.original

2) chmod 444 interfaces.original

3) sudo nano /etc/network/interfaces and then applied my network settings (IP, netmask, etc.). The syntax and configuration of my "interfaces" file is without flaw since it was simple, typical and was assigning my up to then DHCP assigned IP of 192.168.2.3 to static.

At about that point and although "ifconfig" showed the changes had been applied as planned the network card stopped working. I could no longer ping anyone but myself and the leds both on my network adapter and on my switch were turned off. Since my configuration also has a Windows 7 installation I rebooted to Windows in hope of troubleshooting through device manager but I got an error code 10 which means that the adapter could not start. Did I fry my network adapter for good and for all or I still have a chance of repairing it?

PS: After a closer look I saw that the NIC's LEDs indicate that the device cannot start. I am considering to reboot my MB as a last resort since the NIC is an onboard device and changing BIOS settings has done nothing to restore it.

View 1 Replies View Related

Ubuntu Networking :: Atheros AR5001X+ Wireless Network Adapter (rev 01) Not Working

Mar 3, 2011

I have a Toshiba MX35 laptop it's a little old but does the job. I'm have a problem getting the wireless to work. I can boot a live CD either Ubuntu 10.10 or Fedora 14 and they will see the wireless card. The card is Atheros Communications Inc. Atheros AR5001X+ Wireless Network Adapter (rev 01).

I have Ubuntu 9.10 installed and that is the OS that is having the problem seeing the wireless. The computer will not handle Ubuntu 10.10 (at least it won't handle the desktop effects under Ubuntu 10.10) but handles them just fine under 9.10 and that's why I have 9.10 installed. I really need the Wifi to work because I'm going to travel in a few days.

View 5 Replies View Related

Ubuntu Networking :: Realtek WLAN Adapter Not Working On Acer TravelMate 250 With 10.10?

Jun 22, 2011

(For the record, I have already read the other threads. Either they don't work for me or are too difficult.) My laptop is an Acer TravelMate 250. I have installed Ubuntu 10.10 (2.6.35-28 generic i686) after erasing Windows 7. At first, the usb wireless adapter worked. Then, I restarted the PC because of some updates and it didn't work anymore. In "edit connections" I find "Auto SpeedTouch8350DB" which is the wireless connection (on my sis's computer it works). When it tries to connect, I'm asked the password but it doesn't work.

[Code]...

View 3 Replies View Related

Ubuntu Networking - N600 Wireless Dual Band Usb Adapter Not Working

Jul 5, 2011

I am running the newest Ubuntu and can not get my wireless adapter working. I ran

[Code]...

View 9 Replies View Related

Ubuntu Networking :: Wireless Dell 1450 USB Adapter Stops Working After Upgrade To 10.04?

May 1, 2010

I upgraded from 9.10 to 10.04 and my wireless card no longer works.

The card is a Dell 1450 USB a/b/g card.

lsusb sees the card. device id is 413c:8104

dmesg says that p54usb is trying to load firmware isl3887usb but that failed (error -2)

I looked in /lib/firmware and didn't find that file

ps. god why did i upgrade?

View 9 Replies View Related

Ubuntu Networking :: Linksys Dual Band Wireless NUSB Adapter Not Working On 10.04

Jul 30, 2010

I'm not a new user to ubuntu but I'm stuck with a driver issue on a wireless adapter upgrade for ubuntu 10.04 lucid lynx. I'm running an acer aspire am1201-e1622a with amd athlon x2 64 bit processor, however i'm only running the 32 bit version of lucid lynx. The following are a few outputs of some commands that might assist in finding the proper driver. Before though i will tell you what i have done.

I have installed a few different drivers from windows wireless driver installer such as the xp and vista 32 and 64 bit versions with no success in the computer actually recognizing that i have a wireless adapter installed. The windows wireless driver installer said that hardware was present but i was unable to scan for networks or even see that i had a choice to do that. This meaning that it didn't show i had wireless capabilities in my network manager. i tested this with gnome network manager which is the default manager for 10.04 and also with wicd with no success.

Following these tests i attempted to install a driver from source following the instructions on another forum. This allowed me to manually turn on the wireless adapter but i was still unable to find any networks. This meaning that wicd was able to see that i had a wireless adapter installed but it for some reason was unable to see any wireless networks around. I'm 100% sure my router is in range and that it is configured correctly. I have 5 other computers connect to this router along with some of them being ubuntu.

[Code]....

View 2 Replies View Related

Ubuntu Networking :: Connection Stop Working With RTL8187 Wireless Adapter After Few Minutes

Feb 4, 2011

I buy a new usb network adapter (Through DX), when I try to use it in ubuntu or BackTrack4 Final it is working, and connecting networks even with WPA encryption. But after few minuts it stops working totally. It is showing that I'm connected to the AP but web sites do not respond.

Notes:
- I have another PCI Wireless adapter which works fine.

- The problematic adapter works great on windows.

- A driver CD came with it, including a linux driver which I wasn't succesfully installed.

- A BackTrack3 Disc came with it, claming by the instructions that the adapter will work with it. I didn't try it because i have backtrack 4 final.

It took me dozens of surfing the web hours, and too many restarts,

View 2 Replies View Related

Fedora Networking - ASUS USB N13 Adapter Stopped Working After Upgrade

Apr 12, 2011

I am running Fedora 14. I've had an ASUS wireless adapter working for a few months now, with no problems. Today, I installed updates, one of which required a computer reboot (not just logging out and back in). I rebooted the computer, and when it came back up, the wireless adapter did not work.The adapter is visible after lsusb, but there is no wireless showing after iwconfig. What happened? How do I fix it?

View 10 Replies View Related

Ubuntu Networking :: D-Link DWA-643 Xtreme N Express Card Adapter Not Working After Lucid Upgrade

Dec 3, 2010

1. D-Link DWA-643 Xtreme N Express Card Adapter The onboard wireless for my HP tx1000z stopped working a long time ago. This wireless adapter is in my express card slot.

2.

Code:
$ lspci
00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2)
00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2)

[Code]....

View 2 Replies View Related

Fedora Networking :: Wireless Adapter Not Working At Startup - Works Fine After Opening Settings

Oct 1, 2009

This is my startup routine:

I log on and Network Manager shows no wireless adapter.

I go to System > Administration > Network:

There are two entries in the Devices tab: Wireless and Ethernet

As soon as I double click the Wireless device and the configuration pops up, the device starts working (no changes to the settings are made)

I have the following set to ON:
- Controlled by Network Manager
- Activate device when computer starts
- Allow all users to enable and disable this device

View 7 Replies View Related

Ubuntu Networking :: Karmic Koala Yes More Davicom Adapter "not Working" ?

Jan 4, 2010

So i installed Karmic Koala on my HP mini and obviously the wireless driver does not work from the get go. so instead i decided to try to connect my Davicom (9601 chip) USB to ethernet adapter and then get all the appropriate stuff (NDISwrapper/broadcom driver etc.) through a hardline. yet that is proving difficult as well.

kernel is 2.6.31-14 The system sees the adapter. i have the driver for it but it will not compile. i keep getting errors on compile. probably as the driver is a touch old. I did a search and read through all of the old threads concerning the davicom adapter. i tried to blacklist the tulip driver that didnt work. I read through the thread that talks about modifying the config.h to modify configfs.h but that only concerns releases prior to mine.

I grabbed this driver [url]

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved