Hardware :: Microphone Input Fails For IPod / What To Do?
Feb 18, 2011
I'm running Fedora 14 and have installed a Creative Audigy SB0790 card which runs off the CA0106 driver. The sound output is just fine when playing internal sources like sound files and CD's. However, when I plug my iPod into the microphone port, I get no output from the card. I can see that the signal is getting in as pavcontrol, gnome-volume-control, and gstreamer-properties all show activity. In fact, I can hear the signal when running gstreamer-properties, but not after I close it. Is there some special setting or app needed to play music through the mike port?
View 2 Replies
ADVERTISEMENT
May 16, 2010
Having setup lucid lynx, I am struggling with the sound setup. Output is fine, but I can barely hear myself in Skype, after a make a test call, to listen to my own voice. The sound preferences dialog offers multiple device settings to configure, with most offering 3 mic inputs. I've maximized all of them, and yet still no change. I have to make lots of Skype calls every day. This is a Dell xps m1530 laptop.
View 2 Replies
View Related
Aug 1, 2010
The internal microphone never worked, but external worked fine through the input jack with all programs, including Skype.Then, I noticed that the mixer no longer had a microphone control (including in alsamixer). No recording program would work any more, BUT - Skype still worked! OK, so the only program that needs sound input that I use is Skype, so I just left it that way. But now I downloaded a newer version of Skype, and ran it, and my microphone was dead. So I went back to the old version, which used to work fine, and the mic is dead in that too. To make sure it wasn't a setting, I moved the whole .Skype directory out of the way. Still no sound at all from the mic. when I did the Skype test call.
The hardware must be OK, as I am a heavy Skype user and had no problems. Simply running the newer version killed it instantly, and i cannot get it working again. I don't understand why the microphone input control is no longer available. No mixer program can see it. It used to be there, but then there it was, gone!
View 14 Replies
View Related
Jun 17, 2011
I have no sound input from my microphone. With a fresh install of 11.4/gnome desktop it was working.
Then all I did was installing the multimedia support from the script in the opensuse guide (which interestingly includes some files for k3b so I suspect there is a conflict of libraries now that some kde libs have been installed) and a full system update. After that, my mic has stopped working.
If it helps at all, the output of the ALSA Information Script at my machine is hosted at: [url]
View 5 Replies
View Related
Aug 12, 2011
For some time, my microphone input doesn't reach the recording application, but instead goes directly to the loudspeaker. If I make a sound in the microphone, it will go to the loudspeakers, and Audacity or Skype will not "hear" anything (and of course, with this set-up, there's a constant noise in the loudspeaker, coming from the microphone).This problem goes away if I install PulseAudio. So obviously, there's nothing broken with either of ALSA or hardware, only some misconfiguration somewhere, and PulseAudio can make a sense of the mess. Playing with all sorts of configurations in Alsamixer didn't help.
Unfortunately, I don't want PulseAudio, because it causes output problems which are a bit too subtle for me to describe coherently here. So I'd rather fix ALSA than Pulse.Please direct me into how to investigate this. The OS is Debian Unstable, the audio card is an integrated Intel ALC1200.
View 1 Replies
View Related
Jan 4, 2010
I have had trouble with my sound since installing. I have been able to get output sounds to work by setting my sound output to:Internal Audio Digital Stereo (IEC95 instead of:However, my microphone does not work. I know it was working earlier on but I can't figure out what the settings were at that time.Are there any ideas on what I can try to get the input and output audio working correctly?
View 1 Replies
View Related
Dec 12, 2010
I am trying to get the sounds that are played on the Casio CTK-651 keyboard from the keyboard into ubuntu or windows. I can get the signal, but no sound is played back under Windows when it's connected with an AUX-to-USB connector. When I do it with the MIDI-to-USB connector in windows and ubuntu, whenever I press a key, I get what is programmed into LMMS through connecting in a channel. I can't get the piano or guitar or whatever sound that the keyboard is making into the computer. I can upload some video to show what I'm talking about with the aux connector.
View 1 Replies
View Related
Jan 21, 2011
I've tried to look for a solution for a few days now, and haven't had any results so far. I really hope you can help me so I can get to talk with my girlfriend.I'm running Lubuntu with 10.04 LTS, and alsa version 1.0.23 on Samsung NC10.Hardware works, soundcard is recognized by the OS, modules are loaded, alsamixer volume up and unmuted, sound output is ok, arecord or sound recorder don't get input.
- The microphone hardware works. Having the volumes up I hear the noise from the speakers when tapping the microphone.
- Soundcard is recognized by OS (and like I said, music and all other sound output is perfectly fine)
View 3 Replies
View Related
May 7, 2010
since 9.10.My microphone works, BUT only after I open the 'Sound Preferences' panel, and change the setting under the 'Connector' tab to another selection (any will do), then set it back to 'Microphone 1'.Since this works, I wondered if there is a way to make this happen automatically at every login?
View 7 Replies
View Related
Oct 13, 2010
I have installed Fedora 11 recently on a new system. Sphinx speech recognition was working fine on my old system. When i run the same project on my new system, the system does not respond as it is waiting for microphone voice input.
Then I checked the microphone and have set it properly and its working now. The details how i made my microphone working is at the following link: [url]
Though, I can record and play any sound, but it is not working with sphinx project.
View 1 Replies
View Related
Dec 20, 2010
I am attempting to record my microphone input using ffmpeg / alsa but always receive the following error:
[code]...
Using arecord works perfectly with hw:0,0. I had also tried to use /dev/snd/hwC0D0 as input but I receive an error from alsa saying that it doesn't exist (despite it existing and having adequate permissions). I know absolutely nothing about hardware but am comfortable around the command line
View 2 Replies
View Related
Mar 20, 2009
I've installed fc10 but I got some problem with the audio driver for my Dell Vostro 1700. In particular line input doesn't work correctly neither the built in microphone, neither the line input. Is there a special driver?
View 3 Replies
View Related
Feb 15, 2010
mount: wrong fs type, bad option, bad superblock on /dev/sdb1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so
I am not sure what is happening here. My ipod nano worked perfectly with the computer I am using with Windows XP, Ubuntu 9.04, Xubuntu 9.04, and gNewSense 2.3.
I wanted to use Xubuntu 9.10, but my ipod does not work with it. The other choice is gnewSense, but I am not sure if I want to be limited by their ultra-strict free software policy. I posted a TON of information on the Ubuntu forums about this:
[URL]
View 1 Replies
View Related
Jan 24, 2010
My 4 GB 2nd generation Ipod nano will not mount to my Compaq Presario 2105US running Xubuntu 9.10. I get a message that says, "Failed to mount Ipod" with a description that says, "mount: wrong fs type, bad option, bad superblock on /dev/sdb1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so ."
I even went back to my XP to restore the ipod to factory settings essentially formating it, to see if that would help, but I get the same result.
Is there something that I may have overlooked?
View 7 Replies
View Related
Jun 10, 2010
I have a vinyl turntable. The only output it has are some RCA cables. I've connevted these to other RCA cables, so now, I can put it into one of the audio in jacks on my computer. It's just a standard microphone plug. In Windows, there was an option that would let me listen to the input, and this would be the only way I could listen to my vinyls. In kubuntu, I can't find any way to do so. I don't want to have to boot into Windows 7 every time I want to listen to my vinyls, so is there any way I can get around this?
View 1 Replies
View Related
Aug 20, 2010
I am trying to connect my 2nd Gen Ipod to Xubuntu and import my music collection onto the Ipod. I am having real problems with this. Rhythm Box does not recognise the Ipod with the plug-in, I have tried Amarok, but each time I tried to open it, it just crashed, tried sending a bug report but that did not want to work. I have also tried Exaile with the Ipod plug-in but when you go to the device manager you can click on the Ipod but nothing happens. I have tried looking at the Exaile forums but this seems to be a problem for others as well. The Ipod mounts ok, now a bit stuck.
View 1 Replies
View Related
Jan 13, 2010
Its a dell e510 with about a gig of ram. I'm struggling to get my ipod touch working with the gtkpod ipod manager. At this point my ipod shows on my desktop when i connect it via usb. I cannot set up the repository for it in gtkpod because i dont know the location its mounting to. if its mounting at all. so my question is. how can i tell where my ipod is being mounted? I dont have a clue what to look for in the terminal results for "df -a"
But this is what i get:
Code:
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda1 152357444 65577992 79040140 46% /
proc 0 0 0 - /proc
none 0 0 0 - /sys
[Code]...
Edit : Itouch = first generation 8gb Edit 2: I would like to create a sticky thread that helps new users answer questions about ipods. Will a moderator please let me know what i should include in their opinion? ex. using wine to run itunes, gtkpod and how to set it up, using mm players like banshee and songbird... what version of ubuntu works best with the ipods.
View 7 Replies
View Related
Mar 24, 2010
I've been trying to get my iPod touch (8GB, jailbroken) to connect with gtkpod iPod manager. But whenever I try to load the iPod I get this message.
Quote:
iPod Database Import Failed: 'illegal seek offset 0 (length 4) in file '/media/ipod/test/iPod_Control/iTunes/iTunesDB'.'
View 3 Replies
View Related
Apr 19, 2010
tranferring Ipod audiobooks (m4b) files to my Ipod. I can't get them to transfer with GTKpod or Rhythmbox. I did manage to get a file copied, but it didn't show up on the Ipod.
View 2 Replies
View Related
May 31, 2010
somewhere on this site i saw a link for another firmware option for the ipod besides the actual ipod software. can someone direct me to the link possibly?
View 1 Replies
View Related
Sep 29, 2010
I"m running an online radio station and would like to run my headphone audio into my microphone or a virtual microphone, either way, I would like my audience to hear what I hear without having to hold the Mic to the speakers.
View 2 Replies
View Related
Nov 4, 2010
I recently got a real fancy unidirectional microphone, but when I go and use it, something strange happens. The mic is a mono mic, but when I record something, it appears to think it's stereo. Instead of having the same thing on both channels, it puts it all in the left channel, and silence on the right channel.
I tried fiddling with alsamixer. In capture (F4), adjusting the "Capture" device has an effect. However, it doesn't do anything useful. Lowering the right channel to zero does nothing, lowering the left channel to zero creates silence, and disabling the right channel creates silence.
In my System>Preferences>Sound (or pavucontrol, or what-have-you), there are "Analog Stereo Input" and "Analog Stereo Duplex" options there, but no "Analog Mono Input" or "Analog Stereo Output + Analog Mono Input" options (the latter being ideal).
Something interesting, though, if I do this:
Code:
arecord -r 96000 -D pulse -c 1 -vv -V mono /dev/null
it works correctly and outputs on both channels. But if I do
Code:
arecord -r 96000 -D pulse -c 2 -vv -V stereo /dev/null
then it's back to the same behavior. The VU meter on the second command shows the left channel going up and down as I make noise, but the right one always at zero.
The machine does have a crap internal mic built in to the screen bezel. If I do either of the above commands, they both work correctly. The stereo VU shows the same activity for both channels.
The machine is a Eee 1015PED, which has Intel integrated sound. Something probably insignificant is that the mic has a 1/4 inch mono plug, and to get it to plug into the Eee, I needed to get a 1/4 female to 1/8 male adapter. The mic's 1/4 plug is mono (duh) and therefore two-conductor, but the adapter I got is stereo, or three conductor (L, R, GND). I don't know if this is tripping something in hardware to tell it it's stereo or something.
I tried the mic on my desktop, which has a SB Audigy 4 (the non-pro flavor) and that has the "Analog Mono Input" function, so that works fine. Is there some way to turn this stereo input into mono input?
View 1 Replies
View Related
May 1, 2010
I installed Lucid. I used to have Ubuntu 9.10 and to connect my iPod to my laptop's speakers. There was an option in 9.10 in the Sound Options to change the Mic Input into a Line Input. But now unfortunately I can't find it in Lucid have only 2 audio ports in the laptop: Headphone port, Mic port.
View 9 Replies
View Related
May 5, 2010
I would like to use Japanese kana (hiragana, katakana, kanji) on Ubuntu but everything that I've tried to get it set up and running isn't working. The Spanish that I have set up is working perfectly so far.
I've read, the SCIM input program should start up automatically when loading a program, it doesn't. When I have it loaded I cannot seem to get the input working.
View 9 Replies
View Related
Jan 9, 2010
able to get an I pod nano 3rd gen 4gig to sync with Rhythm box or sync rhythm box back to the Ipod?
View 2 Replies
View Related
May 29, 2010
I can't get Thai language input to work.
In "language support" I installed Thai, but it remains grayed out.
In "ibus preferences / input method", no languages are shown.
I added:
I added: "ibus-daemon --xim" to startup applications. No effect.
View 1 Replies
View Related
Mar 29, 2010
I have a 14TB raid, file system is read-only and I am trying to run e2fsck -B -p -C -v -y /dev/sdb1, it goes through, but fails and says bad block/inode or fails to transfer, something like that.Is there a way I can get this to run successful, this is a production storage server, its critical.
View 13 Replies
View Related
Feb 28, 2011
whats the different between Chain RH-Firewall-1-INPUT (2 references) and Chain INPUT (policy ACCEPT)?
View 1 Replies
View Related
Jan 23, 2009
I am trying to upgrade RH9 to F10. I have downloaded dvd iso image i386. The SHA1 integrity check passes. The installer fails media check due to "errors". I did an independent verification of the DVD and zero errors found. Download was from Fedora's own torrent, so files should be verified anyway. If I bypass the media check I get the message : Running anaconda 11.4.1.62 the Fedora system installer - please wait.....
[Code]....
View 7 Replies
View Related
Jul 1, 2011
can't get my microphone to work. Here is the output for: dmesg | grep input
[code]...
View 1 Replies
View Related
