I recently bought a couple of Gateway SX-2841 boxes, Intel EM64T CPUs, lots of memory, big HDs. One has Ubuntu 10.10 Gnome and one has Debian 6.0.1a. So far, so good. I'm still working on USB hookup to a Motorola modem, but the LAN works fine. The machines did have problems running Firefox with the "pre-installed" Win7 Home edition OS. But then, I never intended to keep the MS system, anyway.
View 5 RepliesAll I want to do is transfer my pictures from my Motorola V3 RAZR to the Ubuntu 10.04 PC. Searching, I installed KMobileTools 0.4.3.3 from the "Ubuntu Software Center" as a Ubuntu 10.04 replacement for the Windows "Motorola Phone Tools". But when I attach my fully charged Motorola RAZR V3 to the Ubuntu 10.04 PC with a USB cable, I can't transfer my pictures from the phone to the PC using KMobileTools.
In fact, there doesn't even appear to be a MENU for transferring pictures from the Motorola RAZR V3 to the Ubuntu 10.04 PC in the KMobileTools application. What would you suggest for transferring pictures from the Motorola RAZR to the Ubuntu 10.04 Lucid PC?
after a reboot of my Lenny system, the default gateway will lost. Then i must try "networking restart" and the gatway will be set
my interfaces looks :
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
[Code].....
I have a Bubba Two headless PC box and on it a Debian GNU/Linux Squeeze operating system.
I have upgraded my Bubba Two [URL]to Debian Squeeze from Debian Etch following these steps: Running Debian lenny or squeeze on Bubba Two [URL]
After this upgrade I have setup networking on Bubba following these steps: Setting up networking [URL]
In the case [URL] doesn't work, here are these steps:
[Code].....
I was running 2.6.26 and I've recently upgraded to 2.6.32-trunk-amd64 along with other packages (mostly dependencies)... which possibly involved the network stack.
After this upgrade my home gateway stopped working and I'm clueless to where the problem may be.
I can see that the iptables are still there when I type:
iptables -t filter -L -v -n -x --line-numbers
iptables -t nat -L -v -n -x --line-numbers
I have been trying to get my wireless interface work but i am unable to find a driver for the wireless interface.
View 1 Replies View RelatedI can't get my Motorola Xoom to 'mount' on Ubuntu 10.10
The Motorola Xoom has a USB connection that uses MTP (Media Transfer Protocol) and not MSC (Mass Storage Class). This allows file-level access as opposed to the whole media block. My Droid X mounts fine but it uses MSC.
I have loaded the MTP tools:sudo apt-get install mtp-toolsand I have installed both Qlix and gPodder since these both use MTP.
The Xoom remains unrecognized. So instead of file-level access I have NO-level access.
Recently I acquired a Motorola Xoom very satisfied with it. However I tried to connect my Xoom by USB, and sure enough it would not mount. So, I did some research and came across this web site [URL] Followed all the steps, and finally saw that my Xoom was mounted on my desktop. However it would not open, and it outputs the following message; Could not display "/media/xoom". The file is of an unknown type
View 2 Replies View RelatedI am having a problem with my el-cheap-o Net 10 phone. There is not time left on the phone but I can still use it as a camera. Now I want to download the pictures to my laptop. When I plug it into a USB port, I get these messages:Nov 13 13:13:29 acer64 kernel: usb 6-1: new full speed USB device using uhci_hcd and address 11
Nov 13 13:13:29 acer64 kernel: usb 6-1: New USB device found, idVendor=22b8, idProduct=4080
Nov 13 13:13:29 acer64 kernel: usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[code]....
Unable to open /dev/sdb I can't read anything from the disk. I tried Winders also with the same failure.
I know they are old, but I will probably have my v3m for a while. I would like to connect to it to transfer ring tones, pictures, and contacts, etc. moto4lin installed and runs fine. I have assigned the device id's and device file name. I get a message when I plug and unplug the phone so I know I have the correct addressability. When I press the connect/disconnect button, I get
Code:
[info] Phone is unpluged. Please connect it
[info] Phone pluged as P2K
Try to connect
[code]......
Before someone jumps on me for running as root, there are posts all over the internet that indicates that root is required.
I am running Debian 6.0.1a on a Gateway SX-2841 (64-bit) and I would like to set up the Motorola SBV5220 modem using USB because the Ethernet port is used for a LAN (not on Internet). I am trying to follow the Cable Modem HOWTO. /var/log/messages lists CONFIG_USB_NET_CDCETHER=m, not exactly as shown in the HOWTO. lsmod does not list anything like either CDCEther or usbnet. I am hesitant to try running modprobe until somebody says this is the right thing to do.
View 7 Replies View RelatedI will try to set up the Motorola modem with Debian (Squeeze) using USB. I would like to use Ethernet for a LAN separate from the Internet connection.
View 5 Replies View Relatedusing Ubuntu and want to completely switch to it from Windows, but I have an phone motorola a1200 that synchronizes well using windows, but can't find a way to do it in Ubuntu using the usb with evolution
View 1 Replies View Relatedhow can i install the faxmodem motorola sm56.i have 2yaers of search and i dont have the answer?
View 4 Replies View RelatedI have an old Motorola RAZR that is starting to give up the ghost. I want to upload the phonebook to my computer as easily as possible, in a form that it could then be downloaded to another phone. I have looked at moto4lin and kmobiletools - I didn't actually try them, because the writeups I found seemed always to have some problems, and nothing seemed very Fedora friendly.
If I have to go with those tools, I will, but I don't want to sync the phonebook with what is on my computer or anything, I just want to copy the data somewhere temporarily and then copy it back to another phone. And no, there is too much for the SIM card. I suppose I could do it with the SIM card in several iterations, but that seems awfully kludgy. Is there a mount point or something where I can find the thing after I plug it into a USB port on my computer? I don't have a bluetooth device for my computer.
When I connect my Motorola Xoom Tablet (Android 3.0) to my PC (Fedora 15) via Mini-USB cable, the Fedora system doesn't recognize the tablet as a external drive.Connecting my phone Nexus S (Android 2.3) the same way, it will be recognized and mounted.
View 8 Replies View RelatedI recently got a Xoom and have been loving it. However, I can't get USB file transfer to work. Apparently the devices is connected by mtp and I've got mtp-tools to use from the command line, but they're not able to mount the device or connect to it in any other way, although they recognize it. I've even fiddled around a bit in /etc/udev/rules.d according to the instructions in this thread: [URL]
Didn't do a thing, sadly, although I wasn't able to get gnomad to work - it kept on claiming it was missing dependencies, which it wasn't, as far as I could tell. I've got Ubuntu running on another computer, though, and installed gnomad on that. Also no dice, although I hadn't changed /etc/udev/rules.d on that computer.
Linux for starters, have used this link to help set up the phones tethering using wired cable the computer is old with no wireless and it is integrated into the motherboard so dont flame about spending 20 bucks on a wireless card please. Now, we can start tunneling betwwen your computer and your phone. Change directory to the tools subdirectory of the extracted Android SDK directory. Issue the command ./adb forward tcp:8080 tcp:8080... everything went smooth until here ... there doesnt appear to be a filenamed ./adb so i cant move on and dont know where to go from here.
it is worth noting i am a noob to android sdk and i think i need to set somemore up to get it to work right you download a starter package and the rest you reach out and grab with the starter package although i dont know where tostart there either.
I have a motorola bmc 9012 dvr and am attempting to connect an external hard drive to it via usb. when i plug in the external hd the dvr recognizes it and wants to format the hd. i let it format the hd but now i can not view the hd from my windows machine. anyone have an idea of what type of file system the dvr formatted the hd with?
View 4 Replies View RelatedI want to tether my Milestone phone with my Lucid 10.04. I did a search regarding the software needed on the PC side to support this but unfortunately I found none. What all I got is a S/W named Pdanet to be used with windows only.
View 2 Replies View RelatedRight now I am struggling to fix my Motorola RAZR V3 phone (it is just one year old). The problem is that the internal speakers (the regular ones, used to listen to the caller) are apparently set to a quite low volume and I can not hear almost anything. Researching similar cases I learned about the existence of several software tools designed to hack the phone and raise the volume on the aforementioned speakers; unfortunately those tools are Windows-only.
I also stumbled into a Linux program (moto4linux) which apparently would allow me to do the same thing, unfortunately I've been unable to connect to my phone using that program. Before I go any further in my attempts to force moto4linux to connect to my phone, could anyone please confirm that such program is actually able to hack the phone's speakers the way I want to? Or is it merely for file & contacts synchronizing?
The Motorola mounts in 10.04 but I can't tell the size of the available disc space so don't know if it's some internal memory or the 16 GB microSD card. It shows some files and a setup.exe so I suspect it's not the card and don't want to screw anything up.
View 2 Replies View RelatedI installed ubuntu 10.04 in my desktop, was working fine. connecting to the internet through linksys router. now my internet is not working, because i removed the linksys router and connected directly from the internet provider modem, Motorola sbv5222 broadband modem. Now my internet is not working.
View 4 Replies View RelatedI am trying to find out the best way to sync my address book from my motorola razr v8, and eventually my new nexus one phone, to Evolution in fedora 12. I don't use bluetooth, just a simple usb connection.
View 1 Replies View RelatedI'm having the issue that I cannot conenct to the wlan of my Motorola Milestone/Droid with Android 2.2 and the 3G Hotspot service started. When I want to connect, I have to type the WPA2 passhrase in, I do that correctly and then the system tries to conenct. This failed and then I have to type the passphrase again.It's a Samsung N130 Netbook with Ubuntu 11.04 installed.
[Code]...
Just finished installing slackware 13.37 64 bit on two boxes which are connected to the modem. I ran netconfig to enable dhcpd and the two boxes are on the internet working. Now, what I don't understand is how should I access(r/w) files from one another.
View 3 Replies View RelatedDon't know how this happened, but I only see small boxes instead of my fonts on the desktop, in the title bars or on the panel
I really don't know how to fix it..
I want to provide remote support for some linux boxes via ssh. I have no passwords on these machines and they are behind a nat, without port forwarding.My idea was, that whenever a client needs my service, he/she types a command on her machine, which builds up a two-way connection to my server. Using this two way connection I would like to do the task, he/she asked me to.It would be an ideal solution, if it would be transperent for the client, like a shared screen session...
View 3 Replies View RelatedWhen I turn on my computer running Ubuntu 10, everything works fine except there are no fonts displayed anywhere, and instead i see boxes (like when a character is missing). If i go into a terminal, i see that i have plenty of fonts installed. I noticed a pango error earlier, but I can't reproduce it right now because I am not near that computer. I tried reinstalling libpango to no avail. I have never heard of something like this, can anyone shed some light, or offer some suggestions on what could be wrong?
View 2 Replies View RelatedI am a total novice to Ubuntu OS. I am running 10.10 on a Eee PC 4g.
Some dialog boxes are too big for my monitor. I have tried re-sizing using mouse's middle button but there seems to be a limit to the amount you can reduce, which leaves them still too big??
I have hidden both top/bottom bars.
I am prevented from setting up a wireless connection. 1. Because the 'Editing Wirelss Connection' box/window is too long to be able to click apply?? 2.Because all the tuts I find are for older versions and don't seem to apply now?
I starting to think maybe Ubuntu is not for me, I am not a programmer?