When I connect my Motorola Xoom Tablet (Android 3.0) to my PC (Fedora 15) via Mini-USB cable, the Fedora system doesn't recognize the tablet as a external drive.Connecting my phone Nexus S (Android 2.3) the same way, it will be recognized and mounted.
View 8 RepliesI can't get my Motorola Xoom to 'mount' on Ubuntu 10.10
The Motorola Xoom has a USB connection that uses MTP (Media Transfer Protocol) and not MSC (Mass Storage Class). This allows file-level access as opposed to the whole media block. My Droid X mounts fine but it uses MSC.
I have loaded the MTP tools:sudo apt-get install mtp-toolsand I have installed both Qlix and gPodder since these both use MTP.
The Xoom remains unrecognized. So instead of file-level access I have NO-level access.
Recently I acquired a Motorola Xoom very satisfied with it. However I tried to connect my Xoom by USB, and sure enough it would not mount. So, I did some research and came across this web site [URL] Followed all the steps, and finally saw that my Xoom was mounted on my desktop. However it would not open, and it outputs the following message; Could not display "/media/xoom". The file is of an unknown type
View 2 Replies View RelatedI recently got a Xoom and have been loving it. However, I can't get USB file transfer to work. Apparently the devices is connected by mtp and I've got mtp-tools to use from the command line, but they're not able to mount the device or connect to it in any other way, although they recognize it. I've even fiddled around a bit in /etc/udev/rules.d according to the instructions in this thread: [URL]
Didn't do a thing, sadly, although I wasn't able to get gnomad to work - it kept on claiming it was missing dependencies, which it wasn't, as far as I could tell. I've got Ubuntu running on another computer, though, and installed gnomad on that. Also no dice, although I hadn't changed /etc/udev/rules.d on that computer.
Upgraded to 11.04 and my graphical tablet is recognized no longer Any idea how can I set it up? Wizardpen is not working, the ppa on my repository says something about "Natty" instead of "Maverick" (As than before)
If I type lsusb on my terminal then this line appears:
Code:
Which is completely false because the Genius MousePen 5x4 Tablet is this one
And I have the Genius Easypen i405, which is this one
I have recently bought a Wacom Bamboo Pen Tablet, and just as recently installed Fedora 12 KDE for its supposed "excellent tablet support".
Well, I have yet to see any of that. Unless the fact that I'm using KDE affects this (and I'm staying KDE, no more GNOME for me!), I see no reason why my tablet should not work. It was working fine in Windows Vista Home Premium 32-bit (though the last time I started up in Windows it said it didn't recognize the device).
None of the applications that I've heard implemented in Fedora to support tablets were installed, but then again they're all probably GNOME apps, am I right? Still, my tablet should at least act as a mouse? I checked KPackageManager, and it said that the latest linuxwacom driver was installed. So why isn't anything working?
It seems as if everything - all this talk about tablet support in F12 - is just for GNOME. About the only thing working with my tablet as I type this is the status light, which indicates it being recognized as a USB device, and it flashes like it should when I tap the surface with the pen, but it seems as if there's nothing to receive the input. I even installed the latest GIMP, and when I checked Input Devices, nothing relating to the tablet was even there! At least on Windows it showed the Pen and the non-existent eraser, though neither worked properly, but it seems as if Fedora 12 doesn't even know it's there!
I shouldn't have to change anything in xorg.conf, because I thought that linuxwacom did it for you?
All I want to do is transfer my pictures from my Motorola V3 RAZR to the Ubuntu 10.04 PC. Searching, I installed KMobileTools 0.4.3.3 from the "Ubuntu Software Center" as a Ubuntu 10.04 replacement for the Windows "Motorola Phone Tools". But when I attach my fully charged Motorola RAZR V3 to the Ubuntu 10.04 PC with a USB cable, I can't transfer my pictures from the phone to the PC using KMobileTools.
In fact, there doesn't even appear to be a MENU for transferring pictures from the Motorola RAZR V3 to the Ubuntu 10.04 PC in the KMobileTools application. What would you suggest for transferring pictures from the Motorola RAZR to the Ubuntu 10.04 Lucid PC?
I got my self an x201 Tablet as of last week. Everything works out fine, like tablet, fingerprint, webcam and stuff - only the tablet keys are not beeing recognized by xev itself. Needless to say I can't bind them to a certain command, which makes working in Tablet-Only mode needlessly cruel.
View 3 Replies View RelatedI m on ubuntu 10.04 and have a Trust tb 4200 tablet.. and having problems with my trust tablet runing on ubuntu.. i pluged in the tablet and to my amaze it started working right away until i pressed the pen on the tablet.. i cant seem to move the mouse curser anymore unless i touch the pen on the tablet. (wich acts as a click) so i thought that i may be missing the drivers.. i checked thes forum and there was a post to install the aptek drivers which i did (but still worked the same) and i found out thet there was no 10-aiptek.fdi (in "/etc/hal/fdi/policy/") so i created one and copied one from a post.. in [url]...3&postcount=50 but still cant move the courser without touching.. its like if it did no diference at all.. i also changed the values in the 10-aiptek.fdi with no changes.. the size of the tablet is just the size of the screen so i am using the full tablet.. and no buttons work...
I think the drivers are not workin.. in the synaptic it shows as intalled...
Code:
Code:
I have noticed they sell digital writing tablets that have the ability to show the pen strokes both on the tablet's display and on the computer's monitor at the same time, and I think they are called LCD digital tablets and they serve as both a second computer monitor AND a writing tablet combined in one, such as the Wacom Cintiq, and must be connected both by USB as well as with a VGA/DVI port, and you have the ability to open up a drawing application directly from the tablet such as Paint where you can draw or write on the tablet's display. And you can see what you are writing on the tablet's display. Then you save the results to a JPEG file, for example.
But I do not want a digtal tablet quite as elaborate as that. I am looking for something similar to the credit card terminals used in stores where you can sign your name directly on the display after swiping your credit card, and you can see what you are writing as you write. Then your signature shows up on a paper receipt later. Do they make digital tablets like that for the home user, and if they do, would they have to hook up to the VGA/DVI port on your video card? What are they called and where can I get one?
I've searched several online stores but they do not say if you can see what you are writing on the tablet's display. I already have a Wacom tablet in Linux but you can not see what you are writing on the tablet. I have to keep looking up at my computer's monitor to see what I am writing and proficiency is reduced as a result. And again, I do not want a tablet as elaborate as I described in my first paragraph. I want something simplier, such as the type used at a credit card terminal.
I want to get this pen tablet (not tablet computer) to work (for drawing in kolorpaint / krita / gimp etc)
Omnipen OP-906 (ancient mid-90's device). It came with floppy with drivers for Windows 3.11 and old Mac Plugs into ttyS0 (com1. It has "tablet mode" and "mouse mode". It is meant to always start in "tablet mode", but if I give it a small power interruption (take out the AC plug from the wall halfway and quickly plug it back in), it sometimes kicks into "mouse mode". The original driver is supposed to be able to switch the modes
[code]...
I have an old Motorola RAZR that is starting to give up the ghost. I want to upload the phonebook to my computer as easily as possible, in a form that it could then be downloaded to another phone. I have looked at moto4lin and kmobiletools - I didn't actually try them, because the writeups I found seemed always to have some problems, and nothing seemed very Fedora friendly.
If I have to go with those tools, I will, but I don't want to sync the phonebook with what is on my computer or anything, I just want to copy the data somewhere temporarily and then copy it back to another phone. And no, there is too much for the SIM card. I suppose I could do it with the SIM card in several iterations, but that seems awfully kludgy. Is there a mount point or something where I can find the thing after I plug it into a USB port on my computer? I don't have a bluetooth device for my computer.
Right now I am struggling to fix my Motorola RAZR V3 phone (it is just one year old). The problem is that the internal speakers (the regular ones, used to listen to the caller) are apparently set to a quite low volume and I can not hear almost anything. Researching similar cases I learned about the existence of several software tools designed to hack the phone and raise the volume on the aforementioned speakers; unfortunately those tools are Windows-only.
I also stumbled into a Linux program (moto4linux) which apparently would allow me to do the same thing, unfortunately I've been unable to connect to my phone using that program. Before I go any further in my attempts to force moto4linux to connect to my phone, could anyone please confirm that such program is actually able to hack the phone's speakers the way I want to? Or is it merely for file & contacts synchronizing?
I am trying to find out the best way to sync my address book from my motorola razr v8, and eventually my new nexus one phone, to Evolution in fedora 12. I don't use bluetooth, just a simple usb connection.
View 1 Replies View RelatedJust installed Fedora 12 on HP Tx2 Tablet, Dual boot with Windows72 surprises:#1: Fedora won't power down the system, by any "shut down" command & buttons...#2: Tablet and broadcom wireless won't work, (these just for new installer's reference)
View 2 Replies View RelatedIt looks as if I'll get a deal I can't turn down and sell my old original Android phone and get a new Verizon Android. They also have a tablet, there is the present 7 and a half inch screen and a newer ten incher coming out, the smaller one is heavier but I could get it for a relatively low price. it has a usb port. Question is can I dual boot Gnome3 on it? and can I then update it? And can Gnome3 do the touch screen thing? Using Fedora of course. Or should I put the tablet off for a while?
View 1 Replies View RelatedI have a dual head setup on Fedora 15 with nvidia drivers: two separate X screens (no xinerama, no twin view). Screen 1 is at right of Screen 0. My Wacom tablet is recognized by the xorg server and the whole tablet area is mapped to the whole area of Screen 0 which is exactly what i want. However when the stylus goes beyond the right edge of the screen, the tablet area gets mapped to Screen 1 and there is no way to come back to Screen 0. What i would like is to restrict the tablet to Screen 0 all the time. I used to do this in Fedora 13 by adding a file named
Code:
/etc/X11/xorg.conf.d/50-wacom.conf
in which there was a line
Code:
Option "ScreenNo" "0"
It doesn't work anymore. The option seems to be ignored by xorg since it doesn't appear anymore in
Code:
/var/log/Xorg.0.log
How can i restrict the tablet area to Screen 0?
I'm looking for a decent program to take notes on my Lenovo tablet laptop. What's your favorite?
View 1 Replies View Relatedim trying to use my wacom tablet with fedora 10. I have looked around the net trying to find a simple way to install the driver but it is all rather technical would some one be able to give me a basic how to it would be great
View 2 Replies View RelatedI've just installed Fedora 13 and I have a question. How do I tune my tablet? I've tried to set threshold and aspect in xorg.conf just like in Fedora 11, but it doesn't work in the current release.
Here's a part of my xorg.conf:
I also tried 'xsetwacom' command, but I get errors.
I upgraded to Fedora 12 right after release, everything was working fine until update on previous weekend. Looks like it updated Wacom drivers and kernel. Now what I have. I hotplug my tablet in USB, and everything seems fine, I can position a cursor and press buttons, but after I press some button it hangs (LEDs on tablet are responding) I must remove Stylus from proximity in order to make it respond again (while stylus is away LED on tablet switches off for a fraction of second).
If I move mouse during tablet hanging, applications barely respond and if they are it is like mouse button is pressed (selecting text). I tried wacdump, and it's reporting everything's fine (X,Y, Tilt, Pressure everything shows up). I couldn't find evidence that wacom driver is controlling it, but I assume if wacdump is reporting then it is. I have:
Kernel 2.6.31.6-145.fc12.x86_64
linuxwacom.x86_64 0.8.2.2-15.fc12
I didn't touch xorg.conf in sense of tablet, but it worked for me in F11 and until now. I'm trying to make least manual configurations possible. Through exploring /proc/bus/usb/devices and kernel messages I confirmed that wacom drives is handling the tablet. And I noticed that in X's log
(II) config/hal: Adding input device Wacom Intuos3 9x12
(**) Wacom Intuos3 9x12: always reports core events
(**) Wacom Intuos3 9x12 device is /dev/input/event8
(**) Wacom Intuos3 9x12 (Wacom Intuos3 9x12) is not a pad
(**) Wacom Intuos3 9x12 is in absolute mode
(**) WACOM: suppress value is 2
(**) Wacom Intuos3 9x12: reading USB link
(**) Wacom Intuos3 9x12: threshold = 61
(**) Wacom Intuos3 9x12: max x = 60960
(**) Wacom Intuos3 9x12: max y = 45720
(**) Wacom Intuos3 9x12: max z = 1023
(**) Option "BaudRate" "9600"
(**) Wacom Intuos3 9x12: serial speed 9600
(II) XINPUT: Adding extended input device "Wacom Intuos3 9x12" (type: Wacom Stylus)
(EE) Wacom Intuos3 9x12: Top/Bottom area overlaps with another devices.
(EE) Couldn't init device "Wacom Intuos3 9x12"
(II) UnloadModule: "wacom"
(EE) config/hal: NewInputDeviceRequest failed (1)
I've encountered quite similar error in openSUSE when was configuring tablet manually in xorg.conf. As I can see problem is with "pad" device, which I disabled in openSUSE in order to make X running. So why is it not working?
I recently purchased a Wacom Bamboo Pen Only (CTL-460). It's a great device and in Fedora 15 (x86_64) it worked out-of-the-box like a charm!
I don't miss the rubber or the extra keys on the tablet. But I'm having quite some trouble, using the pen as a mouse replacement in all day use. The following is with respect to usage outside GIMP and Inkscape (i.e. Firefox, Nautilus etc). What I would really like to have, is:
+ scrolling by pressing the "first button" and simply _moving_ the pen. Just like with my Thinkpad-Trackpoint: Here I press the middle key and can then scroll just by controlling the Trackpoint. Would already be cool, if I could scroll by pressing the "first button" and touching the tablet. A short tap while pressing the "first button" should still be a "middle click"!
Code:
Found a solution for "jamming at the edge of the screen". Just resized the "area" a bit (smaller) with xsetwacom...
I am having a problem with my el-cheap-o Net 10 phone. There is not time left on the phone but I can still use it as a camera. Now I want to download the pictures to my laptop. When I plug it into a USB port, I get these messages:Nov 13 13:13:29 acer64 kernel: usb 6-1: new full speed USB device using uhci_hcd and address 11
Nov 13 13:13:29 acer64 kernel: usb 6-1: New USB device found, idVendor=22b8, idProduct=4080
Nov 13 13:13:29 acer64 kernel: usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[code]....
Unable to open /dev/sdb I can't read anything from the disk. I tried Winders also with the same failure.
I know they are old, but I will probably have my v3m for a while. I would like to connect to it to transfer ring tones, pictures, and contacts, etc. moto4lin installed and runs fine. I have assigned the device id's and device file name. I get a message when I plug and unplug the phone so I know I have the correct addressability. When I press the connect/disconnect button, I get
Code:
[info] Phone is unpluged. Please connect it
[info] Phone pluged as P2K
Try to connect
[code]......
Before someone jumps on me for running as root, there are posts all over the internet that indicates that root is required.
I am running Debian 6.0.1a on a Gateway SX-2841 (64-bit) and I would like to set up the Motorola SBV5220 modem using USB because the Ethernet port is used for a LAN (not on Internet). I am trying to follow the Cable Modem HOWTO. /var/log/messages lists CONFIG_USB_NET_CDCETHER=m, not exactly as shown in the HOWTO. lsmod does not list anything like either CDCEther or usbnet. I am hesitant to try running modprobe until somebody says this is the right thing to do.
View 7 Replies View RelatedI will try to set up the Motorola modem with Debian (Squeeze) using USB. I would like to use Ethernet for a LAN separate from the Internet connection.
View 5 Replies View Relatedusing Ubuntu and want to completely switch to it from Windows, but I have an phone motorola a1200 that synchronizes well using windows, but can't find a way to do it in Ubuntu using the usb with evolution
View 1 Replies View Relatedhow can i install the faxmodem motorola sm56.i have 2yaers of search and i dont have the answer?
View 4 Replies View RelatedLinux for starters, have used this link to help set up the phones tethering using wired cable the computer is old with no wireless and it is integrated into the motherboard so dont flame about spending 20 bucks on a wireless card please. Now, we can start tunneling betwwen your computer and your phone. Change directory to the tools subdirectory of the extracted Android SDK directory. Issue the command ./adb forward tcp:8080 tcp:8080... everything went smooth until here ... there doesnt appear to be a filenamed ./adb so i cant move on and dont know where to go from here.
it is worth noting i am a noob to android sdk and i think i need to set somemore up to get it to work right you download a starter package and the rest you reach out and grab with the starter package although i dont know where tostart there either.
I recently bought a couple of Gateway SX-2841 boxes, Intel EM64T CPUs, lots of memory, big HDs. One has Ubuntu 10.10 Gnome and one has Debian 6.0.1a. So far, so good. I'm still working on USB hookup to a Motorola modem, but the LAN works fine. The machines did have problems running Firefox with the "pre-installed" Win7 Home edition OS. But then, I never intended to keep the MS system, anyway.
View 5 Replies View Related