OpenSUSE Multimedia :: Can't USB File Transfer To Motorola Xoom
May 29, 2011
I recently got a Xoom and have been loving it. However, I can't get USB file transfer to work. Apparently the devices is connected by mtp and I've got mtp-tools to use from the command line, but they're not able to mount the device or connect to it in any other way, although they recognize it. I've even fiddled around a bit in /etc/udev/rules.d according to the instructions in this thread: [URL]
Didn't do a thing, sadly, although I wasn't able to get gnomad to work - it kept on claiming it was missing dependencies, which it wasn't, as far as I could tell. I've got Ubuntu running on another computer, though, and installed gnomad on that. Also no dice, although I hadn't changed /etc/udev/rules.d on that computer.
View 9 Replies
ADVERTISEMENT
Feb 27, 2011
I can't get my Motorola Xoom to 'mount' on Ubuntu 10.10
The Motorola Xoom has a USB connection that uses MTP (Media Transfer Protocol) and not MSC (Mass Storage Class). This allows file-level access as opposed to the whole media block. My Droid X mounts fine but it uses MSC.
I have loaded the MTP tools:sudo apt-get install mtp-toolsand I have installed both Qlix and gPodder since these both use MTP.
The Xoom remains unrecognized. So instead of file-level access I have NO-level access.
View 6 Replies
View Related
Jun 8, 2011
Recently I acquired a Motorola Xoom very satisfied with it. However I tried to connect my Xoom by USB, and sure enough it would not mount. So, I did some research and came across this web site [URL] Followed all the steps, and finally saw that my Xoom was mounted on my desktop. However it would not open, and it outputs the following message; Could not display "/media/xoom". The file is of an unknown type
View 2 Replies
View Related
May 31, 2011
When I connect my Motorola Xoom Tablet (Android 3.0) to my PC (Fedora 15) via Mini-USB cable, the Fedora system doesn't recognize the tablet as a external drive.Connecting my phone Nexus S (Android 2.3) the same way, it will be recognized and mounted.
View 8 Replies
View Related
Jan 13, 2011
All I want to do is transfer my pictures from my Motorola V3 RAZR to the Ubuntu 10.04 PC. Searching, I installed KMobileTools 0.4.3.3 from the "Ubuntu Software Center" as a Ubuntu 10.04 replacement for the Windows "Motorola Phone Tools". But when I attach my fully charged Motorola RAZR V3 to the Ubuntu 10.04 PC with a USB cable, I can't transfer my pictures from the phone to the PC using KMobileTools.
In fact, there doesn't even appear to be a MENU for transferring pictures from the Motorola RAZR V3 to the Ubuntu 10.04 PC in the KMobileTools application. What would you suggest for transferring pictures from the Motorola RAZR to the Ubuntu 10.04 Lucid PC?
View 5 Replies
View Related
Mar 10, 2010
i am trying to transfer a file from my live linux machine to remote linux machine it is a mail server and single .tar.gz file include all data. but during transfer it stop working. how can i work and trouble shooot the matter. is there any better way then this to transfer huge 14 gb file over network,vpn,wan transfer. the speed is 1mbps,rest of the file it copy it.
rsync -avz --stats bkup_1.tar.gz root@10.1.1.22:/var/opt/bkup
[root@sa1 logs_os_backup]# less remote.log
Wed Mar 10 09:12:01 AST 2010
building file list ... done
bkup_1.tar.gz
deflate on token returned 0 (87164 bytes left)
rsync error: error in rsync protocol data stream (code 12) at token.c(274)
building file list ... done
code....
View 1 Replies
View Related
Mar 4, 2009
I have a motorola bmc 9012 dvr and am attempting to connect an external hard drive to it via usb. when i plug in the external hd the dvr recognizes it and wants to format the hd. i let it format the hd but now i can not view the hd from my windows machine. anyone have an idea of what type of file system the dvr formatted the hd with?
View 4 Replies
View Related
Apr 29, 2011
since i put suse 11.4 (kde 4) on my new laptop there has been something really bugging me. Now, when i transfer files (e.g. from computer to USB HDD) no window pops up, it just runs in the background and uses the notification manager thingy instead. i much preferred having a small pop-up window instead. any ideas on how to get it back like this?
View 3 Replies
View Related
Apr 26, 2011
I have connected two opensuse-11.3 with a UBS 2.0 Link cable (host-to-host). According to several USB direct file transfer tutorials ifconfig should show me a usb0 device, however I do not see one. How can I establish a file transfer between two linux via USB?
View 4 Replies
View Related
Jan 1, 2010
Having a bit of a issue with Debian Squeeze and transferring files to the Sony PSP..Hook up PSP to USB port and Debian mounts it..I go to drag a 125 meg mp4 to video folder..Copy windows takes about 10 seconds to transfer it..Exit USB mode and there is no video there. Go back into USB mode and look at video folder on the PSP memory stick and there is no video..It vanished. From another after copy progress closed I right clicked PSP and unmounted it..
It error-ed saying device was busy and could not unmount..Looking at light on PSP i see memory stick is still being written to..i wait for light to stop flashing..About a minute or so..Then am able to unmount it..Go to PSP video and theres the video ready to be watched. Debian isnt accurately showing the copy progress...Its showing complete when it isnt..I have to watch the light on PSP to know when it is truly finished.
View 3 Replies
View Related
Dec 18, 2010
HARDWARE SPECS:
- Intel P4 3.2GHz
- Gigabyte G32M-S2L
- 3GB RAM DDR2
- 3 x 1TB RAID5 (MDADM)
- 1 x 1TB OS Drive
New Linux user here. I'm running 11.3 x64 gnome (runlevel3) on my headless home file server. I've mounted my RAID array onto /shared and have setup samba (through Yast) for file sharing. However I am having an issue when I transfer multiple small files over the network (i.e music) it will crash the box. I am unable to reach it through ping or SSH. It is also physically unresponsive where by connecting a keyboard or mouse to the system will not work.
Looking through /var/log/messages does not indicate any sort of issue. I've tried turning off unnecessary programs (rTorrent etc) to make sure it isn't overloading the connections however the box still crashes. Although transferring files locally from HDD to HDD does not crash the server.
View 9 Replies
View Related
Jan 30, 2010
I am currently running Windows Xp with service pack 3 and OpenSuse 11.0 (i586) on the same machine on separate hard drives. here are the specs on the machine. (Note: it is only a single core machine. I have no idea why both Suse and Windows say it is dual core as the processor was bought and installed months before dual cores went on the market.)
OS Information
OS: Linux 2.6.25.20-0.5-default i686
Current user: telknor@linux-l3e2
System: openSUSE 11.0 (i586)
KDE: 4.0.4 (KDE 4.0.4 >= 20080505) "release 15.4"
[Code]....
Now on to my problem. About a year ago I had to wipe my Windows drive and backed up about 32 GB of stuff from it to my OpenSuse drive. I did this from the Suse OS using Dolphin. In fact I can see, open, change, delete, modify layout, and move stuff around on the Windows drive all day long from Suse. I can as I said pull stuff over to the Suse drive from Windows drive while in Suse and save to Suse drive. Now I have need of the stuff that was moved but Windows does not see the Suse drive for what it is. Just says 'unknown partion type' gives size in GB and ignores it otherwise. From Suse if I try to move stuff back to the Windows drive it starts to transfer then stops and tells me it does not have permission to access the destination drive, folder, or location depending on how I tried to save it to the Windows drive. Adding new hard drives to the system does not help and the external 1 TB drive we have Suse can see it but will not do anything with it. The thumb drives on the other hand Suse does not have a problem with. It will open, read, and write to them all day long. Suse will not access the network to dump files to the network file server and it does not see any other systems on the network not even the ones running the same OS. I want to do the following:
1. Move the Windows files from the Suse drive to the Windows drive in same machine or to the network file server (also a windows machine)
2. Move all the Suse files to another machine running same Suse OS.
3. Wipe the Suse drive in this Machine so that Windows can use it.
View 6 Replies
View Related
Nov 30, 2009
Can anyone recommend an easily usable media transfer application? That is, I want to copy audio files from my CDs, compress them if possible, perhaps organize & store them on disk, and transfer the ones I want to listen to to a media player. (Currently a Zen Vision:M).
The basic problem (there seem to be lots of ramifications) I've had with Creative's software and the Windows media player is that there doesn't seem to be any obvious way to sensibly organize the audio: it's all based on "albums", "artists", and "songs", where I listen to audio performances. So what I'd like to do is to copy say the two disks of Macbeth (which I can do, but it goes into about a dozen Track xxx files in a directory for each disk), somehow organize that into a unit that I can simply copy to the player and play from beginning to end. This seems to me to be a very basic sort of function, but nothing I've found will do it, at least in a way that I can discover.
View 7 Replies
View Related
Jan 2, 2011
When accessing an NFS mount for a large (200MB+) file transfer, the transfer starts rapidly, then becomes slower and slower until it hangs. On several occasions, it has frozen the client machine. Both client and server are set to default to nfs version 3. Slowdown and hang also occur when connecting to FreeBSD NFS mounts.
Presumably (I hope), there is some sort of configuration for the client that needs to be set. what should be changed in the configuration? This worked out of the box in OpenSUSE 11.0.
View 9 Replies
View Related
Dec 18, 2010
I'm using 11.3 x86-64 KDE4.4,I bought a Corsair 4GB thumb drive last week,but when I tred to transfer some file from Dolphin to Corsair,the 'paste' selection in pop up is grey color,it means I couldn't paste thing into this thumb drive. I tried to modify the permission of this thumb drive,but failed,it pop up said I have no permission to do that.And when I download a .rar file tried to extract it with Ark,it loading the archieve like never ending,what's the problem?
View 3 Replies
View Related
Mar 24, 2011
As most do now my local library has a decent catalog of audiobooks, which I would like to be able to listen to on my iPod. These books can be downloaded only by using Overdrive Media Console (which is available only for Windows and Mac, and also requires Windows Media Player to work!) and iTunes if you want to transfer to an iPod.
I've searched around for Linux friendly solutions. They fall into two categories, try Wine/virtual machine/dual boot to run the required software, or give up. But pretty much everything I have found is about four years old now. Has anything changed in the last few years, or is this still pretty much the way things are? At the moment I use my girlfriend's Vista computer to download books, but I would like to be as Windows free as possible, and able to do it on my own computer.
Can anyone offer advice for being able to download audiobooks and put them on an iPod, with a minimum of non-Linux software? Relatedly, I would also be quite happy to replace the iPod firmware with Rockbox, but from what I can tell that would make library audiobooks even less accessible (so asking if this is an option is like asking for $10 after being refused $1).
View 3 Replies
View Related
May 15, 2010
I have a problem with uploading any file to my Suse 11.1 with vsftpd. The active (not commented out) settings in my /etc/vsftpd.conf are:
dirmessage_enable=YES
chroot_local_user=YES
local_enable=YES
anonymous_enable=NO
syslog_enable=YES
connect_from_port_20=YES
pasv_enable=YES
listen=YES
ssl_enable=NO
And I added umask 022 to the user login script problem I have: I login with user and password that exists as a local user on my suse machine. I can read and download from my homedirectory, but I cannot upload with filezilla. Then I get the error: 550 permission denied critical file transfer error
View 3 Replies
View Related
Apr 20, 2011
I was trying to copy a few files to my phone via bluetooth when the file transfer window popped up with the progress bar stating "Connecting" and an error: the name org.openbox.client was not provided by any .service files..
I am using: openSUSE 11.3
Gnome 2.32, Kernel 2.6.38,
obex-data-server 0.4.5-12.2,
[code]....
View 3 Replies
View Related
Aug 11, 2010
I use Rhythmbox to transfer songs to my iPod (nano 1st gen). I installed Mediatomb the other day so I could stream music and video on my PS3 (which is awesome btw). Unfortunately, using Mediatomb my PS3 would only find a small portion of my music collection.So I ran Code:sudo nautilus then right clicked on my music folder, and changed the Group category to "Create and delete files" under the Permissions tab. After, my PS3 found my entire music collection. Great. But now in Rhythmbox I get an error about the mp3 files being read-only and can't transfer them to my iPod I've tried reversing the steps (with and without 'sudo'), but no luck. Under the File Access section of Permissions, I can never change anything (like to "read only" or "read and write"). No matter what I choose it always stays at "---"
View 2 Replies
View Related
Dec 19, 2010
So I use the following to rip audio from one .mp4 file and then generate one .mp3 file.
Code:
caleb@linux-vmp1:~> ffmpeg -i a -ab 128000 -ar 44100 01.mp3
Obviously, this takes a file named a and makes a file named 01 that is an mp3. It works great and I have used it many times. The problem is, I would like to rip the audio from several files all at once. I am sure there is a way to do it but I haven't stumbled upon the way to do it.
View 9 Replies
View Related
May 25, 2010
I have a linux server and I have SSH Access to it.
How do I transfer my files to my desktop.
View 1 Replies
View Related
Aug 5, 2011
I have setup ssh between a F15 box and a remote centOS box. I am using ssh -X, then nautilus/gnome-session to open a gui file browser/desktop environment of remote machine. But anything I want to copy from remote machine to local machine by gui, is showing 'path not found' error. CLI work just fine but is it possible to transfer files between remote and local machine by gui over ssh?
View 3 Replies
View Related
Feb 14, 2011
how can we transfer the file from putty session to windows host which resides remotely....
View 1 Replies
View Related
Oct 4, 2009
We are having few computers in ms-dos 6.22 , we want to download file from Dos machine to redhat linux machine.
View 4 Replies
View Related
Oct 27, 2010
I need to create a program that has both a server and a client and can transmit PDF and text files between the two using UDP as the underlying carrier while behaving as if it is TCP. We have successfully created a UDP program that can simply transmit strings, but we are not really sure on how to transform this code to do files. We know that we need to use a buffer of some sort to transmit the file in pieces.
Code:
//dg_cli.c
#include "unp.h"
#include "sys/socket.h"
#include "string.h"
#include "stdio.h"
#include "stdlib.h"
#include "arpa/inet.h"
#include "netdb.h"
#include "sys/file.h"
#include "sys/types.h"
void dg_cli(FILE *fp, int sockfd, const SA *pservaddr, so
{ int n;
char sendline[MAXLINE], recvline[MAXLINE + 1];
while (fgets(sendline, MAXLINE, fp) != NULL) {
sendto(sockfd, sendline, strlen(sendline), 0, pse
n = recvfrom(sockfd, recvline, MAXLINE, 0, NULL,
recvline[n] = 0; /* null terminate */
fputs(recvline, stdout); } }
Code:
//dg_echo.c
#include "unp.h"
#include "sys/socket.h"
#include "string.h"
#include "stdio.h"
#include "stdlib.h"
#include "arpa/inet.h"
#include "netdb.h"
#include "sys/file.h"
void dg_echo(int sockfd, SA *pcliaddr, socklen_t clilen)
{ int n;
socklen_t len;
char mesg[MAXLINE];
for ( ; ; ) {
len = clilen;
n = recvfrom(sockfd, mesg, MAXLINE, 0, pcliaddr, &len);
sendto(sockfd, mesg, n, 0, pcliaddr, len); } }
Code:
//udpcli01.c
#include "unp.h"
#include "sys/socket.h"
#include "string.h"
#include "stdio.h"
#include "stdlib.h"
#include "arpa/inet.h"
#include "netdb.h"
int
main(int argc, char **argv)
{ int sockfd;
struct sockaddr_in servaddr;
if (argc != 2) {
fputs("usage: udpcli <IPaddress>", stderr);
exit(0);
} bzero(&servaddr, sizeof(servaddr));
servaddr.sin_family = AF_INET;
servaddr.sin_port = htons(SERV_PORT);
inet_pton(AF_INET, argv[1], &servaddr.sin_addr);
sockfd = socket(AF_INET, SOCK_DGRAM, 0);
dg_cli(stdin, sockfd, (SA *) &servaddr, sizeof(servaddr));
exit(0);
}
Code:
//udpserv01.c
#include "unp.h"
#include "sys/socket.h"
#include "string.h"
#include "stdio.h"
#include "stdlib.h"
#include "arpa/inet.h"
#include "netdb.h"
int
main(int argc, char **argv)
{ int sockfd;
struct sockaddr_in servaddr, cliaddr;
sockfd = socket(AF_INET, SOCK_DGRAM, 0);
bzero(&servaddr, sizeof(servaddr));
servaddr.sin_family = AF_INET;
servaddr.sin_addr.s_addr = htonl(INADDR_ANY);
servaddr.sin_port = htons(SERV_PORT);
bind(sockfd, (SA *) &servaddr, sizeof(servaddr));
dg_echo(sockfd, (SA *) &cliaddr, sizeof(cliaddr));
}
Code:
//unp.h
#include "sys/socket.h"
#include <stdio.h>
#define MAXLINE 4096
/* max text line length */
#define SERV_PORT 9877
#define SA struct sockaddr
void dg_cli(FILE *, int, const SA *, socklen_t);
void dg_echo(int, SA *, socklen_t);
View 1 Replies
View Related
Nov 17, 2010
In my laptop with debian-lenny OS I have a number of ripped dvd movies some of which are about 2.5GB. I have transferred those with less than 2GB (that is the size of my usb-flashdrives) to my netbook (with opensuse-11.3 OS) with the help of usb-flashdrives. Is there any method of tranferring the larger files by connecting the two machines by ethernet cables with usb ports and using some software packages?
View 7 Replies
View Related
Feb 17, 2010
The last I knew, there still didn't exist a VNC Viewer program for Linux that has UltraVNC or TightVNC file transfer. Is this still the case? I've looked around and so far I haven't found a Linux client that supports either Tight or Ultra file transfer. For example, we are currently connecting to Windoze servers that run UltraVNC server. It would be nice if the Linux VNC client could support file transfer. The alternative is to run the VNC viewers in Wine but I'd rather use a native Linux one if there is such a thing.
View 4 Replies
View Related
May 25, 2010
How to transfer a file from PC to Pen Drive? I'm having problem in transfering files from my laptop to my pen drive. tell me how to send a file from pc to pen drive.
View 2 Replies
View Related
Jun 20, 2011
when i try to transfer a file via bluetooth ,i turn bluetooth ON but i can't toggle "visibility" ON......how do i do it...I even can't add a new device....how do i then transfer file via bluetooth...?
View 4 Replies
View Related
Sep 13, 2011
I am transferring a file from a linux pc going to a windows ftp server using "ftp put". My file is a zip file that includes .txt files inside it. Here is what's happening when I transferred this file :I used ftp put for transferring and found that my transferred zip file was corrupted and couldn't be opened on the ftp server.I found the solution for this on the internet. I needed to use 'binary' to make it right.
I transferred again using binary and then ftp put the zip file onto the other end. Yes, it worked. My zip file wasn't corrupted anymore and I could already opened it on the ftp server. But the problem remains on the .txt files inside it. Converting the file into binary made my .txt files to be distorted and unreadable. I read from the internet that .txt files need to use Ascii instead of Binary to be readable, but if I use ascii it would cause my zip file to be corrupted again. I need to successfully transfer a zip file that contains .txt files using ftp put.
View 5 Replies
View Related
