Ubuntu Multimedia :: ERROR: Unable To Open '/usr/lib/xorg/modules/libglx.so' For Reading
Nov 23, 2010
I'm trying to update the drivers to NVIDIA-Linux-x86-260.19.21.run (GeForce GT 220) but ran into several problems. I'm currently running Ubuntu 10.04. when running sudo sh NVIDIA-Linux-x86-260.19.21.run /var/log/nvidia-installer.log gives the following errors:
-> Uninstallation of existing driver: NVIDIA Accelerated Graphics Driver for
Linux-x86 (260.19.21) is complete.
-> Searching for conflicting X files:
ERROR: Unable to open '/usr/lib/xorg/modules/libglx.so' for reading (No such file or directory)
[code]....
View 2 Replies
ADVERTISEMENT
Feb 7, 2010
I just wanted to post this in the forums for anyone else that was having the same issue. I looked all over the internet for 4 hours and could not find a solution and finally figured out what to do. Maybe this will help save some time for someone else.
The ERROR:
Removing nvidia-glx ...
dpkg-divert: error checking `/usr/X11R6/lib/modules/extensions/libglx.a': No such file or directory
[code]....
View 4 Replies
View Related
Mar 23, 2011
I was trying to install VirtualBox through the YaST > Software Management but it is not working, someone in the forum told me that I have to download the OSE version and do it manual way. Finally I am able to start up VB but not able to use the network connection. Thus I am trying to do this:
/etc/init.d/vboxdrv setup. I get this error:
[code]...
When I type dmesg, it shows me a bunch of info which I don't know what should look for. When I type modprobe vboxnetflt, I get the error: FATAL: Error inserting vboxnetflt (/lib/modules/2.6.37.1-1.2-default/updates/vboxnetflt.ko): Invalid module format. what should I do in order to get my VB to be able to connect to the internet?
View 5 Replies
View Related
Mar 19, 2011
I placed the DVD in the player's window. Movie Player was installed earlier. When I am trying to play the DVD, it is shown as under. "An error occurred. Could not open location; you might not have permission to open the file."
View 3 Replies
View Related
Nov 17, 2010
I'm trying to get my Intel HM55 GMA HD graphics card to work in Debian Lenny.As the vanilla Xorg didn't have any support for it, I manually compiled the last stable Xorg source (1.7.1 - such a pain) and the Intel driver. But when I try to launch X, I get the following message :
(EE) GARTInit: Unable to open /dev/agpgart (No such file or directory)
(EE) intel(0) : /dev/agpgart is either not available, or no memory is available for allocation. Please enable agpgart.
View 2 Replies
View Related
Apr 21, 2010
When trying to conigure via nvidia-setting using root (sudo) and then saving to config file I get the ' Unable to open X config file '/etc/X11/xorg.conf' for writing.' in a message box - below is what i get on terminal:
Code:
Traceback (most recent call last):
File "/usr/share/screen-resolution-extra/nvidia-polkit.py", line 75, in <module>
operation_status = main(options)
File "/usr/share/screen-resolution-extra/nvidia-polkit.py", line 51, in main
[Code]...
View 7 Replies
View Related
Jan 11, 2011
I have installed Arch Linux quite a few weeks ago; but I'm still trying my best to install the nividia display driver for my graphics card (nVidia Geforce 2 MX 400). Not only in Arch but have tried installing on other distros and still failed. I have read up all the documentations and I still find it hard to do this task. When I used the terminal and executed the NVIDIA-Linux-x86-94.43.01-pkg1.run file without any window manager running, I get this problem:
ERROR: Unable to determine the version of the kernel sources located in '/lib/modules/2.6.35-ARCH/build'. Please make sure you have installed the kernel source files for your kernel and that they are properly configured; on Red Hat Linux systems, for example, be sure you have the 'kernel-source' or 'kernel-devel' RPM installed. If you know the correct kernel source files are installed, you may specify the kernel source path with the '--kernel-source-path' command line option.
ERROR: Installation has failed. Please see the file '/var/log/nvidia-installer.log' for details. You may find suggestions on fixing installation problems in the README available on the Linux driver download page at nvidia.com.
Now I'm using Arch Linux Kernel 2.6.35 and I have got the source. But where am I suppose to put it now? I do not want to change the kernel. I just want the nVidia installer to identify that there is a kernel source so that it can install. I have searched up a lot on websites and ended up with no proper guide.
This is a very old driver. So since now I have the nVidia driver installation package and also the kernel source,
View 9 Replies
View Related
May 20, 2010
i installed kernel 2.6.34 to fix my lid closing issue, and that went great. but now when i go to reinstall my broadcom i get this error. Code: Reading package lists... Done Building dependency tree Reading state information... Done bcmwl-kernel-source is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded. 1 not fully installed or removed. After this operation, 0B of additional disk space will be used. Setting up bcmwl-kernel-source (5.60.48.36+bdcom-0ubuntu3) ... Removing old bcmwl-5.60.48.36+bdcom DKMS files...
[Code].....
View 9 Replies
View Related
Jul 9, 2011
Error: Cannot open log file '/usr/local/nagios/var/archives/nagios-07-08-2011-00.log' for reading!
View 2 Replies
View Related
Apr 14, 2011
Tonight I installed ubuntu 10.10 (32 bit) on an external usb harddrive with a dvd I burned and I used my older desktop. I disconnected all internal and external drives first so everything had to be put on the usb drive I selected (only option available). I used the option to load extra software, use the entire hard drive, and let the software do it's thing. I basically had no options where to put things and it didn't have much choice.
When I boot the usb drive on my laptop (win 7 64 bit) by telling the bios to boot to it first... I get an error: modprobe: FATAL Could not load /lib/modules 2.6.35-22 generic modules No such file or directory. This message appears twice and then it does boot into ubuntu and seems to work fine. I'm new to this OS so that is an uneducated guess but the things I have done seem to be working. So exactly what is this error referring too? Is there a way to fix the problem or do I just ignore it.
View 9 Replies
View Related
Jul 22, 2010
I am trying to setup Slacware 13.1 x86_64 to a encrypted partition. I used the README_CRYPT.TXT howto : [URL] At the step when I create an initrd.gz I get this error: Quote: ERROR: No /lib/modules/2.6.33.4-smp kernel modules tree found for kernel "2.6.33.4-smp"
I tried to look into the directory and there was only modules under 2.6.44.3. So I tried to change the command into: Quote: mkinitrd -c -k 2.6.33.4 -m ext3 -f ext3 -r cryptroot -C /dev/sda2
This command was successful, but I don't know if this is alright. I made the changes in lilo.conf, add initrd = initrd.gz. This is all on unencrypted /boot partition. The boot=/dev/sda1 I also set for the unencrypted boot partition. When I boot the system I get a kernel panic:
[Code]....
View 5 Replies
View Related
Apr 23, 2011
I am not really new to ubuntu since I had it for time now I still don't know a lot about it since I was not really interested in exploring it and probably won't understand some of the terms used so go easy on me. Now, since I have upgraded to ubuntu 10.10 (maverick) (maybe even earlier since I haven't been using it much) I have not been able to open Software Center.
Trying to openit through terminal gave me the following result:
Code:
Traceback (most recent call last):
File "/usr/bin/software-center", line 90, in <module>
app = SoftwareCenterApp(datadir, xapian_base_path, options, args)
File "/usr/share/software-center/softwarecenter/app.py", line 145, in __init__
self.history = get_apt_history() .....
raise ValueError, 'unknown locale: %s' % localename
ValueError: unknown locale: sr_RS
View 9 Replies
View Related
Jun 13, 2011
When trying to copy my personal address to CouchDB I get this error: Unable to open address book. This address book cannot be opened. This either means that an incorrect URI was entered, or this server is unreachable. Detailed error message: Invalid source
I have been trying (since 10.04!) to sync my Evolution contacts. UbuntuOne seems to be the most promising way of doing that automatically, however, I completely fail at accomplishing this seemingly simple task. I have NEVER been able to successfully back up my address book to UbuntuOne. Note: all other sync works fine. It's just Evolution that is seemingly smarter than I am. Thing I have done to solve the issue:
- Upgraded from 10.04 to 11.04
- All three steps from this article:
https://wiki.ubuntu.com/UbuntuOne/FA...olutionSyncing
- Cuss and swear and roll my eyes, mutter a few unrepeatable curse words about Canonical and their mothers.
None of this has solved my issue.
View 5 Replies
View Related
Aug 12, 2010
I've been tasked with transferring a Python web server from a Debian box to a Fedora server for work. (I think) I've been able to transfer all required files but I'm unable to run the web server because whenever I make the HTTPServer call in the python file I get an error "Cannot assign Requested Address".
I've basically traced the issue back to the server being unable to open a socket on the requested port (8085 in this case). I've checked netstat and there are no processes running on that port (or any other one I've tried for that matter) so wondering if there's a system configuration I need to do to allow programs to bind to sockets. Is there a deny configuration set up somewhere I need to modify? Does this even make sense?
View 1 Replies
View Related
Apr 22, 2010
I'm trying to install The Sims 2 (which I'm aware currently does not run properly in wine anyway), using the multi-CD version. The installation goes normally, up until it comes time to switch from disc 1 to disc 2. The installer prompts me to insert disc 2, but it seems that Ubuntu still believes that the installer doesn't want me to open the drive, because, when I try to open it, it doesn't open, and a window pops up with the following message: Unable to eject CD-RW/DVD RW Drive DBus error org.gtk.Private.RemoteVolumeMonitor.Failed: An operation is already pending
View 3 Replies
View Related
Jan 5, 2011
I burned a bunch of files months ago on DATA dvds to keep copies just incase my external died, so i wanted to grab a few files, and the CD won't show up.
Some of them work, some dont, all were tested and confirmed to be working when i burned them a while back using Windows 7 and some where made using Vista
View 5 Replies
View Related
Apr 7, 2010
after doing an upgrade to 10.4 and updating grub I get this message. how do I address this
[Code]...
View 2 Replies
View Related
Apr 1, 2010
Just switched to openesuse and kde enviroment few days ago, and now I'm snooping around etc.
Anyway I'm having this problem, I'm running a file server at home for my video, data, music and so on. I've used ubuntu untill now (server is also running ubuntu), and I've used vlc to watch the files directly from the server, I never had any problems with it until now (in ubuntu gnome). I navigated with nautilus to a location on the server double clicked and the video opend in my local vlc. Now I'm getting the tittle error, using opensuse 11.2 kde 4 and dolphin. Also I'm told to check the log...
While back I installed dolphin in my gnome on ubuntu, and i remember I got the same error when i tred to open the file on a server and tried to play it in vlc tru dolphin. So...Is this a known issue? Could this be related to dolphin/kde? Where is the vlc log file in opensuse 11.2? Where can I find some workarounds or something?
View 9 Replies
View Related
Aug 8, 2010
There is an option to play ..... video in totem. But i am unable to play any video. Error shows, "Could not open location; you might not have permission to open the file.". I searched google, few suggestions are patches for ......py file, but there is no file named ......py in /usr/lib/totem/plugins/...../ folder.
View 2 Replies
View Related
May 5, 2011
Well after messing with compiz Opacity I managed to make all panels and windows transparent. Only thing I see is desktop background and icons. Tried ctrl+although+f1 and running gconftool-2 --recursive-unset /apps/compiz
Then a reboot. Same issue. Next ran metacity --replace I get: Windows manager error: Unable to open X display
View 2 Replies
View Related
Jun 20, 2010
Trying to split a wavpack on Ubuntu 10.04. I tried: Code: cuebreakpoints Disk3.cue | shnsplit -o flac Disk3.wv It gives an error Code: shnsplit: warning: none of the builtin format modules handle input file: [Disk3.wv] shnsplit: error: cannot continue due to error(s) shown above I already have wavpack 4.60.1-1 installed. Any ideas why shnsplit complains about not seeing wavpack?
View 4 Replies
View Related
Jul 31, 2011
I'm experiencing a problem running Banshee 2.0 on my Ubuntu 11.04 system. Basically, I'm getting the following fatal error, the code of which is quoted hereunder. Of note is that uninstalling and reinstalling Banshee (through Ubuntu Software Centre) doesn't fix this problem. Incidentally or not, I also seem to have a problem with my other (and preferred) media player, Amarok. This is the error code:
Code:
Si verificata un eccezione non gestita: Sqlite error 14: unable to open database file (SQL: UPDATE CorePrimarySources SET CachedCount = 1568 WHERE PrimarySourceID = 1)
at Hyena.Data.Sqlite.Connection.CheckError (Int32 errorCode, System.String sql) [0x00000] in <filename unknown>:0
at Hyena.Data.Sqlite.Connection.Execute (System.String sql) [0x00000] in <filename unknown>:0
at Hyena.Data.Sqlite.HyenaSqliteCommand.Execute (Hyena.Data.Sqlite.HyenaSqliteConnection hconnection, Hyena.Data.Sqlite.Connection connection) [0x00000] in <filename unknown>:0
Exception has been thrown by the target of an invocation.
View 2 Replies
View Related
Jun 25, 2010
After finally getting libptp2 to compile I find that ptpcam does not work. This has worked perfectly fine before with the same camera using Slackware 12.0, I am now using Slackware 13.1 and ptpcam will simply not work. The error is as follows:
Code:
x86_1# ptpcam -l
Listing devices...
bus/dev vendorID/prodID device model
ERROR: Could not open session!
Try to reset the camera.
I have tried to reset with "ptpcam -r", I have also tried to disconnect and reconnect the camera to the USB system, I have tried to reboot the computer, I have tried to use different versions of libptp2 -- all to no avail. The strace shows the issue is apparently a failed ioctl(), although I have no idea why it fails:
Code:
open("/dev/bus/usb/002/004", O_RDWR) = 6
write(4, "1"..., 1) = 1
read(3, "1"..., 1) = 1
[code]....
I have verified that the camera is working in Windows 7 on the same physical computer and I can see the camera from lsusb and dmesg output when I connect it to the USB system. This system is Slackware 13.1, Linux x86_1 2.6.33.4-smp #2 SMP Wed May 12 22:47:36 CDT 2010 i686 Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz GenuineIntel GNU/Linux.
View 1 Replies
View Related
Dec 1, 2009
i try today to install Firestarter , unfortunately i got some problems regarding of the following messages:
1- insufficient privileges :
2- how can i change and save the file /etc/sbin/firestarter with visudo cammand
3-i got this message when i try to run it through terminal Error reading /proc/net/ip_conntrack: No such file or directory
View 5 Replies
View Related
May 29, 2010
Installed Fedora 12 in vmware and during the installation of a professional program versioned 2003, following error encountered.
tail: cannot open `+124' for reading: No such file or directory
gzip: tmptarfile.tar.Z: not in gzip format
tar: This does not look like a tar archive
tar: Error exit delayed from previous errors
extract error, installation cannot proceed.
Checked the google and tried ncompress and export_posix2_version=199209, but the problem persists.Is fedora compatible to this program, MEDICI 2003 ver?
View 4 Replies
View Related
Sep 9, 2010
I have mounted an NFS share with ISO images on my kvm Server. If i connect such a iso to a VM (using virt-manager) for installing a operating system i get the following error on startup: Error starting domain: internal error Process exited while reading console log output: char device redirected to /dev/pts/1 qemu: could not open disk image /mnt/iso/public/Linux/Distributions/Debian/debian-504-amd64-netinst.iso: Permission denied
The problem is definitly that kvm (or qemu or libvirt-bin, i don't know) tries to set permissions (rwx owner for libvirt-qemu, --- for kvm group, --- for other) on the file, although it has read permissions. Is it possible to change this behavior?
View 1 Replies
View Related
Feb 11, 2010
i have ubuntu karmic 9.10 and when i try to update anything or install anything the a very similar error occurs."(Reading database . . . 55%dpkg: unrecoverable fatal error , aborting: files list file for package `com.palm.net.precoddr.fcoaster' contains empty filenameit repeats this message 3 times then gives up i believe.
View 9 Replies
View Related
Sep 7, 2010
I've been using cyrus and sendmail together for a very very long time now. Just recently I upgraded to fedora 13 and now my virtual users can not send email from the /etc/sasldb2 passwords. I get in the /var/log/messages sendmail[31427]: unable to open Berkeley db /etc/sasldb2: Unknown error: Its weird that they can still log in and get email from imapd.conf
sasl_pwcheck_method:auxprop saslauthd
sasl_auxprop_plugin: sasldb
sasl_mech_list: LOGIN PLAIN CRAM-MD5 DIGEST-MD5
[code].....
I even tried re-creating sasldb2 and sasldblistusers2 shows my two users 'one' that is also a local user account and the saslauthd authenticates when sending emails, but the virtual user 'two' can't send just only can log in to receive. /etc/sysconfig/saslauthd is set up as mech=pam. but I don't see how that would be relevant to this issue.
View 5 Replies
View Related
Aug 2, 2010
I tried creating a virtual server in apache and it got created successfully. (I also added a zone in dns for that domain successfully) However, when I try opening that domain in my browser, I see a popup window which asks me what to do with "default" which is a php file type.
I dont see the index.php which should actually open. What do I do to make the php files display correctly?
View 2 Replies
View Related
Jan 10, 2011
OpenSuse 11.2 Downloaded ISO Master 1.3.8 from here: [URL] Opened the Slackware 13.1 ISO within it, tried to modify the Tagfile which resulted in the error:
Quote:
Edit failed, check Options/Editor and running ISO Master from the terminal showed the error in the title of the thread!
View 1 Replies
View Related
