I have tried Mandriva and openSUSE. Both use module skge. I tried the drivers from D-Link but I cannot install them, I always get a error. If the drivers are loaded how come the card cannot connect to the internet? Has anyone ran across this and know what to do?
I was hoping this card was a card that would work out of the box. Does anyone know a good card that will work with linux out of the box? Does anyone know of a good wireless usb adapters that work good with linux?
I am attempting to get this network card running under CentOS 5.2 but have had no luck. Some sites say to use the sk98lin driver, others the skge, which I can't find at all. I have tried multiple versions of the driver in rpm but none seem to work. The card shows under the network manager but will not get an IP address from the DHCP server.
Here are the outputs for this card. uname -rmi 2.6.18-92.1.10.el5 x86_64 x86_64 lspci -m 04:01.0 "Ethernet controller" "D-Link System Inc" "DGE-530T Gigabit Ethernet Adapter (rev 11)" -r11 "D-Link System Inc" "DGE-530T Gigabit Ethernet Adapter (rev 11)" lspci -n | grep "$(/sbin/lspci | awk '/net/ { print $1 }')" 04:01.0 0200: 1186:4b01 (rev 11) lspci -vv 04:01.0 Ethernet controller: D-Link System Inc DGE-530T Gigabit Ethernet Adapter (rev 11) (rev 11) Subsystem: D-Link System Inc DGE-530T Gigabit Ethernet Adapter (rev 11) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (5750ns min, 7750ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 121 Region 0: Memory at febfc000 (32-bit, non-prefetchable) [size=16K] Region 1: I/O ports at e800 [size=256] Expansion ROM at e0000000 [disabled] [size=128K] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=1 PME- Capabilities: [50] Vital Product Data
How to get this working as we have 3 of these cards for computers without a Gb NIC and I don't want to fight with it 3 separate times.
I was wondering if anybody can help me telling me where i could get a driver to patch my DGE-530T with a Marvell Yukon 88E8001 chipset so that i can use aircrack-ng. My OS is Ubuntu 9.10 and I am running it on an HP Pavilion dv7 1020us
I'm trying to connect from my desktop to my router (Networl WGR614v6). It seems to recognise the card, but I can't get a connection. I want to run this machine as a server, which is why I'm using commandline, but I haven't had any luck through the gui either. I've disabled NetworkManager and verified that it's not running. Here's what happens:
Code: $ lsusb | grep -i wire Bus 001 Device 003: ID 148f:2573 Ralink Technology, Corp. RT2501USB Wireless Adapter
I just bought this usb wireless adapter. (I also have a mac using wireless here and it works fine.) I installed ndiswrapper and ndisgtk and then used it to open the .inf file on the driver cd that came in the box. It must have worked reasonably well because if I click on network manager, I can see a number of networks, including my own. However, when I enter the security key for my network the icon spins for a while and then it asks for the key again. I've tried repeatedly and it never connects. I am definitely entering the key properly because I re-entered it on my mac and it worked.
I have attached a document with most of the information requested in the sticky.
I need to connect to my router using only CLI, specifying an username and password, preferably with a single command line, so it won't be interactive, 'cause I need to include the command in a script.
i installed the Centos 5.5 and try to put my USB stick D-link DWA 140 to work. without success. i googled some things put without success. i have not possibility to connect the laptop to the ethernet only way is through this usb stick. i have already downloaded the lasted RT2870 firmware now on i do not know what to do nothing work?
I'm using D-Link GLB-802C router to connect to internet, It has one Ethernet port and USB port. I want to connect to internet in ubuntu using USB port. My PC is P4 machine and it isn't a Ethernet interface. My router's driver CD includes usb drivers to windows 98, xp OS only. I want step by step guide to setup the internet connection in ubuntu. I'm from sri lanka and i using SLT ADSL connection.
I moved to Berlin recently and I got wireless internet through an access point. I'm supposed to use the laptop's built-in wireless netcard to access the internet. This usually works in windows (connection falls out from time to time), but I have yet to make it work in linux. I'm using OpenSuse 11.3 64-bit and the Knetwork manager. Most of the settings in the network manager are correct, but it keeps wanting to use system certificates for the server. By that I mean it keeps checking 'Use CA System certificates'.
So I can't choose the CA-certificate supplied by my internet provider. I keep removing the check-mark and pointing it to the 'hotzoneCA.der' certificate. I also got a 'personal' certificate, in lack of a better word. Its called 'jacob_collstrup.p12'. The Knetwork manager seems to accept the 'jacob_collstrup.p12' certificate, but not the other one.
I just put the certificates in a folder like this /jacob/home/hotzone/zertifikate/ I can see the network fine using the Knetwork manager, and the signal strength seems ok. Not too good, but it shouldn't be a problem. I might have messed up the system, since I first tried this guide, prior to experimenting with Knetwork Manager:
1. (had to run this one as su) Code: wpa_supplicant -w -i wlan0 -c /etc/wpa_supplicant.conf -Dndiswrapper -dd �t 2. (This was supposed to be put in a wpa_supplicant.conf file) Code: ctrl_interface=/var/run/wpa_supplicant ctrl_interface_group=0 opensc_engine_path=/usr/lib/opensc/engine_opensc.so pkcs11_engine_path=/usr/lib/opensc/engine_pkcs11.so pkcs11_module_path=/usr/lib/pkcs11/opensc-pkcs11.so
i have a problem with my new router and ubuntu 10.10. The problem is that my internet connection show me that my laptop had connect to internet but my browser can't open a website ( this problem is the same with my netbook ) to fix it always must turn it off and after on either it never makes.
I have a telephone connection of 1 mega internet modem huawei mt 880 SmartAX my desktop computer is connected via an ADSL PPPoE.I use Ubuntu 10.04 in Spanish and want to know how to connect a WiFi router TP-LINK TL- wr942nd to provide wireless Internet to other 2 PC, a desktop with a plaquet wireles G CNet CWP-854 and 500 series notebook olivetti olibook. The issue is that when I connect the router I can not even go online and do not know how to operate the network, I can not even connect the desktop to my internet provider
i only need localhost for testing some phpnow i get[Wed Apr 28 18:44:57 2010] [error] [client ::1] Symbolic link not allowed or link target not accessible: /srv/www/htdocs
In the ordering of files I keep I need links to directories. Sometimes I even need to move directories to new locations. I have tried using symlinks, but they become dead when I move the directory they point to. I have tried hard links, but I haven't found any Linux file system that would support hard linked directories. How can I achieve that a complex structure of directories (currently with symlinks for directories and hard links for files) keep symlinks live when directories are moved?
- is there any utility that updates symlinks when a directory is moved?
- is there any Linux filesystem that supports hard linked directories?
- is there any good Linux interface to the new NTFS (the only file system I know to support automatically updating directory links, called directory junctions)?
I was looking for live link to download ubuntu mobile but unfortunately I don't find anything... Can someone send me a link for download and a link with the installation instructions ?? All the links that I found are dead.
I have only had a few weeks worth of experience with linux, so I'm probably considered a newbie at this but I felt like giving it a shot. I just configured my new Toshiba Satellite A505-S6969 to jaunty. Most of the transition is going well but I'm stuck with a few issues, one of which is getting my wifi to work. Right now I'm working off of an ethernet cable.spci returns
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port
I have a problem where I'm using Ubuntu linux to mount a Windows Vista machine's USB drive and access it on the web using Apache. I did have the USB drive plugged into the Linux machine directly and that was working via the web. FollowSymLinks is on in httpd.conf
[Code]....
The mount works and I can see the files (see above) from my regular linux user account. If I make a test file in /mnt and soft link to that, I can see it on the web. So it's just the mount to the vista machine that seems to be a problem. It's supposed to be a simple read-only mount and the apache login should (I think) be able to see the same generic root access permissions.
log from apache: [Mon Apr 26 20:39:42 2010] [error] [client 99.99.99.99] Symbolic link not allowed or link target not accessible: /home/user1/pub_html/Music, referer: https://xx.xx.xx/~user1/music.html
The credentials have a login and password that matches a special read-only account on Vista. I can see the files on the system from Linux, but not via the web. As mentioned above, a different link to the same /mnt area works fine via the web. I've tried several different mount options with no success.
I have searched around and am trying to understand the difference between a hard link and symbolic link (soft link). I found this link is quite useful. But I am still not very clear. I understand soft link is not a copy of original file, but is a hard link a copy or not?
There is a symlink from /var/www to a personal directory. FollowSymlink and chmod 755 are all set. It works perfectly until each morning I will get a "Symbolic link not allowed or link target not accessible" error. When I do a "sudo service apache2 restart", the problem will go away.
I installed 10.10 using wubi (Host system is Win XP). I want to create a symbolic link of a file on the host system (Windows c:abc.doc file) in my Ubuntu home ~/ directory. When I type command ln /host/abc.doc abc.doc It gives me following error ln: creating hard link `abc.doc' => `/host/abc.doc': Invalid cross-device link
What I am trying to do is edit the link target to force ip=xxxx.xxx.xxx string at end. I have a software program which access 4 different servers running the software but with different configs. In xp I can copy links and modify as above to correctly force the program to the various servers.
I have read the various how tos on hard vs sym links which I get. Playing around with hardlinks and sysmlinks (the examples I find) does not seem to be what I need. Feel like this is pretty basic stuff but I am a bit stumped.
Right now I have a machine set up running Fedora. I have configured inittab to accept Console Logins, but I am having problems getting my netbook running PuTTY to connect. How would I go about finding the Host Name and Port to connect to?
I tried to install vsftpd on my server and while the installation went fine, I can't run
Code: restart vsftpd As I the get error Code:
restart: Unable to connect to system bus: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory Though I'm able to restart the service with
sudo /etc/init.d/vsftpd restart with a warning telling me to use the service utility. Not only that, but despite the port being open it won't allow me to log in, it just hangs, and I have local users enabled (I've used the default .conf file). Does dbus not come installed in 10.04, and if I did install it would it make a difference for restarting the service? Are there further steps needed not available in the tutorial on the Ubuntu Server Guide for 10.04 to enabling local user authentication? -edit- Figured it out, dbus wasn't installed, vsftpd is working fine now.
My wireless (Toshiba laptop, 10.04 64 bit) is just hanging when trying to connect. It was working fine but now nothing. My Wireless antennae is on and my other laptop can connect with no problems. I have restarted the router and the laptop twice.
I install and configure the vncserver following and reading 1000papers, but all of this present the same problem; when i try to connect to my vncserver,recive this mesage: unable connect to socket: No route to host (113) The OS version is Fedora Core 14 and tigervnc-server i try different solutions including:Allow TCP connection modifing files /etc/gdm/custom.conf and /usr/share/gdm/gdm.chemas Disable SELinux removing iptables Here follow the vncserver configuration:
[code].....
The ip address of the vncserver is correct because i can do ssh on it. Where or what can i do?
I'm a new debian user. I install a Debian in Virtualbox, and try to connect to the source list to update, but it can't connect to the server, while network and internet connection works. This is my sources.list
deb http://ftp.rediris.es/debian/ squeeze main deb-src http://ftp.rediris.es/debian/ squeeze main deb http://security.debian.org/ squeeze/updates main deb-src http://security.debian.org/ squeeze/updates main deb http://ftp.rediris.es/debian/ squeeze-updates main deb-src http://ftp.rediris.es/debian/ squeeze-updates main
