General :: Using SSH To Access It From My Windows - Keeps Timing Out
Mar 11, 2010
I just installed my first ever install of Linux (used Fedora) and am using SSH to access it from my Windows machine. It keeps timing out. Is there something I need to set to make it available all the time?
I was able to get the SSH on and to autostart just fine but when I boot up it only works half of the time. I have to move the mouse and keyboard on the Linux machine before it will respond.
Also if I am working on my Windows machine and don't move the mouse or keyboard every now and then it doesn't work.
View 6 Replies
ADVERTISEMENT
Apr 8, 2011
I have a remote desktop session to a Windows 7 Workstation that keeps timingut/disconnecting after a minute or two of idiling. Also, sometimes it disconnects while I am in the middle of using it.I have tried turing off all NIC power saving options, the sound option for remote desktop, and all the go to sleep power saving options. I don't have any issues with remote desktop connecting to various Windows Server 2008 R2 Machines and VMs.
View 1 Replies
View Related
May 29, 2010
Had to do a fresh install of 10.04 as upgrade went pear shaped. Now I cannot get hunderbird 3.0.4 to work just keeps timing out trying to access mail server pop.1and1.co.uk.Had to change some Firefox options to get it to work with any site other than google.Noticed that ping pop.1and1.co.uk sometimes gave a bad address until I disabled IPv6.
View 6 Replies
View Related
Mar 1, 2011
Last week I installed Ubuntu 10.10 on my system in dual booting. I had installed succesfully both but unable to see data files from windows OS. Though I have excercised the options in various resources available on internet/blogs. System takes about 03 hrs during installation process. I am also unable to configure Thunderbird.
System hardware info is as -
System ManufacturerVIA Technologies, Inc.
System ModelKM266APro-835
System TypeX86-based PC
[code]....
View 8 Replies
View Related
Nov 18, 2010
is there a command or utility out there anywhere which can output a countdown of upcoming jobs from crontab? So you can display the queue of tasks in the order that they'll next run.
Anything like this out there?
EDIT: I realise there's crontab -l but that just echoes out the contents of the crontab file. I'd like somehow to get a countdown.
View 4 Replies
View Related
Aug 28, 2011
I'm having a bit of Internet trouble with a fresh install of Ubuntu Natty and I haven't been able to track down the problem. I have my desktop running over a wireless network, which connects without fail. Somewhat frequently, however, connections to particular websites will start timing out (google, facebook, stackoverflow, us ubuntu archive, etc.). I'm also having a strange issue where my home page [URL] is redirecting to [URL].
Initially I thought it might be an issue with Comcast DNS, so I updated the router to use OpenDns servers. When that didn't work I started to try accessing some of the problematic sites through my laptop (which is using the same router) and they all connect without problem. The issue seems to be with my Ubuntu install, but I'm not sure where to look.
EDIT After doing some further digging, this is starting to look like a DNS issue. My home page appears the resolve to an incorrect ip address when the redirect issue occurs. Still not sure how to track down the problem, however.
View 1 Replies
View Related
Jun 24, 2011
I'd like to measure network latency for SNMP GET request. There is a free command line tool time which can be used to find timing statistics for various commands. For example it can be used with snmpget in the following way:$ time snmpget -v 2c -c public 192.168.1.3 .1.3.6.1.2.1.2.2.1.10.2IF-MIB::ifInOctets.2 = Counter32: 112857973real 0m0.162suser 0m0.069ssys 0m0.005sAccording to the manual, statistics conists of:
the elapsed real time between
invocation and termination,
the user CPU time (the sum of the
[code]....
View 3 Replies
View Related
Aug 11, 2010
I'm trying to remotely access windows log files from linux. So far I've found two different approaches.
Install syslog server on windows machine and let windows send log files to linux, read those files Remotely access log files with wmi implementation for linux.
Does anyone know about limitations for those two approaches before I dive into implementation?
View 2 Replies
View Related
Mar 24, 2011
Ok So I have been using Webmin to set up samba on my Centos 5.5 machine (Domain name in Samba is KISKA).
I set up a test directory /smbtest on the machine and made a share on webmin.
My problem is that when I try to connect to the share on my windows machine (im running windows 7) it gives me a message saying this:
Code:
Windows Cannot Access \Kiskasmbtest
I have made sure to make the permissions on /smbtest 777 and I have tried alot of other stuff as well.
Here is my Smb.conf
Code:
[global]
load printers = yes
cups options = raw
netbios name = KISKA
[Code].....
View 3 Replies
View Related
Jun 14, 2011
I am running qemu version 0.13 on windows XP. My Host OS is Windows XP and my guest OS is Debian 4(Etch). How do I connect to internet from Debian OS? My windows OS can connect to Internet. The following is the launching command which I am using now to launch qemu in windows XP.
qemuqemu.exe -L "qemu" -boot c -hda "debian4.img" -m 512 -localtime -ctrl-grab -usb -net nic,model=ne2k_pci,macaddr=52:54:00:12:34:56 -net user -redir udp:161::161 -redir tcp:4440::22
View 1 Replies
View Related
Jul 5, 2011
I have Windows 7 64bit and Ubuntu 10.04 dual booting on one machine.I'd like to access my Windows 7 files from within Ubuntu (and preferably vice-versa). I've not been able to find any tutorials online to tell me how this is done. There seems to be many tools for Win to Ext2/Ext3 but nothing really providing the solution I need.
View 5 Replies
View Related
Aug 29, 2011
How can I access a Linux partition from Windows? How to read EXT2 from Windows 7 64-bit? Does a ext4 reader for Windows exist?
I am currently in Windows and was wondering if there is any way I could mount my Linux partition, so I can access and transfer files? The file system is ext4
View 2 Replies
View Related
May 29, 2011
I am trying to access my Windows 7 files from Fedora 15. can view the Windows network from Linux and it displays the laptop fine. I can view the folders on the Windows 7 laptop but I can't access/open them. I receive an 'Unable to mount file' message in Linux. I have Samba installed and running fine. Is there something I have to change in the Linux firewall or samba.conf?
View 7 Replies
View Related
Oct 14, 2010
installed ubuntu on hard drive by mistake, can i access my microsoft files or recover them?
View 5 Replies
View Related
Jan 10, 2010
Following a re-install of Ubuntu 9.04 I now find that I am now unable to access some of the Windows folders on the "C:/> Drive" as I did before the re-install was done.
Using the access from "Places" only some of the folders are listed. I have also been trying to re-configure "Wine" to run one or two of the applications in Windows. However, I was able to configure one such application to run but from the External HDD, because I had a backup copy of the ".exe" file. I transferred this file to the Internal HDD and it now runs satisfactory. The other applications are inaccessible because of this "Access" shortcoming. Strangely, I somehow was able to get to the "Start Menu" in Windows listing all the applications' shortcut links, but sadly not the Programs Folder with the ".exe" files in Windows.
I would appreciate any help and/or advice of how I can overcome this problem to enable me to access all Folders in Windows XP.
View 14 Replies
View Related
Nov 26, 2010
I have just configured samba on suse linux. I can see it in the windows workgroup but i cannot access it. When it says the server is not accessible. You might not have permission to use this network resource.I have attached a copy of smb.conf
View 2 Replies
View Related
May 23, 2011
I had Windows on my machine but I decided to try Ubuntu 11.04. I kept my partitions where I store music, movies and stuff and it is OK, I can open anything, but I can't open the files that were in a hidden folder. I see then, I can browse my Windows hidden directories, but I can't open the files!
View 15 Replies
View Related
Mar 31, 2010
i am using ubuntu 9.10.i want to access printer which is installed in windows xp.
View 5 Replies
View Related
Apr 23, 2010
I want to access shared directory of windows xp from redhat linux. I share 'd:' drive from windows machine.
View 3 Replies
View Related
Mar 11, 2010
i have installed RED Hat Linux,installed VSFTP it is working in linux fine but when i access this ftp from windows workstation it is display "530 Permission denied"i have disable anonymous access, i want to authentication when access to FTP site both for windows and Linux
View 10 Replies
View Related
Mar 8, 2010
I have both windows and linux in my system.I want to know how I can access linux files from windows.
View 6 Replies
View Related
Nov 21, 2010
My internet connection used to be a direct LAN connection to my provider. Back then, everything would load fine on both Windows and Ubuntu (dual boot). However, a while ago they started needing me to dial using a username and password (over a PPPoE connection). But since then, I haven't been able to browse certain websites on Ubuntu, even though there have been no such issues on Windows. Some example websites are - Ovi's sign in page (although share.ovi.com loads fine, and nokia.com loads fine), Live Mail (works on Chrome(ium) and Opera but not on Firefox (both 3.6 and 4)) and other random websites.
Some of the websites that don't load show timeout messages on Chrome and for some websites, the browser will keep trying to load without an end (I've left it like that even for hours but not noticed anything different happen).
I have tried changing the DNS servers to the ones suggested in the comment. I have even tried booting from a Fedora LiveCD and then changing the DNS to those (and even to the ones of OpenDNS), but the exact same thing happens. Here's output of ipconfig on Windows: Opera error messages seem to be a little more informative and they have the following errors in turns:
Secure connection: fatal error (552)
Secure connection: fatal error (40)
Followed by: Opera was not able to connect to the server. The server may be using the unsupported SSL 2 protocol, which is not considered safe enough for secure communication. The site owner should upgrade to TLS 1.0 or newer. Does anyone know why this is happening and how it can be fixed?
Update: Just saw here [URL].. that someone else was having similar problem and solved it by putting a NetworkManager.conf file in /etc/NetworkManager. What needs to be in that file?
View 1 Replies
View Related
May 20, 2011
I have an USB internet key (multimode GPRS/EDGE/UMTS/HSDPA) that only works on Windows. Though, I mainly use Linux for development activities and I don't want to move them to Windows. For this reason I decided to use a Windows guest on VirtualBox for internet access and the Linux host for the other stuffs, but I'd greatly prefer to use Linux for everything (internet too) and Windows only as internet gateway.
View 1 Replies
View Related
Feb 24, 2010
I have installed Oracle Enterprise Linux Server 5 as host OS and Windows XPP(Guest OS) as virtual Machine by VMWare Player on standalone Desktop PC.Now I want to run all commands of Linux from Windows XPP.How should I proceed?
View 2 Replies
View Related
Feb 3, 2011
I've been spending sometime trying to setup anclient on windowso access my fedora serverI'm currently using xming but there's no way whatsoeverme to make gnome available remotely. The closest I got was to open a standard X session with no icons but just a terminal.Is there any quick sanity check I can do before spending more time on this
View 2 Replies
View Related
Apr 4, 2011
I would like to know if there is a way that I can access my files on the Windows partition using Linux because the Linux partition does not have enough space to house all the files on the Windows partition.
View 4 Replies
View Related
Mar 24, 2011
I can't access my files on windows from ubuntu anymore. I was able to do that some time ago, I'm not sure what changed. I can see the shared folders, but when I try to open them, and authentication window appears, asking for the login, password and work group. It doesn't get passed that even though I enter the correct information.
View 5 Replies
View Related
Aug 26, 2010
I am having the following problems:I have tried installing vnctightserver on Ubuntu and then installing the viewer on my windows machine but when I try to connect it rejects the connection....I need to remotely access the ubuntu-desktopn my ubuntu server LTS 10.04..... I have tried a number of guides but none are working for me....I have a firewall installed (iptables) but the neccesary ports have been opened up but my server still rejects incoming vnc connections.On a side note I do not have physical access to the server so all setup needs to be done via SSH...
View 3 Replies
View Related
Oct 17, 2010
I have partioned my harddrive when I installed ubuntu 10.10 Desktop edition, 32-bit. But, after I installed it I can no longer access the Windows partition. I have never played with Linux OS before. I will provide a screen-shot of the partition. [URL]
View 14 Replies
View Related
Jul 26, 2011
linux 5.4(RHEL) and window machine are pinging nicely.able to access window on linux but not linux at window(xp)? xinetd is running on linux as well as telnet service is also running on xp.
View 1 Replies
View Related
