General :: Two Navigating Windows At The Same Time?
Sep 24, 2010
i have a problem when opening a session because it pops up in two window pane..!!! i had this problem when i modified the panels and add applets or item on the panel which is the "window list" ,,now i want to restore the default panels ,, by downloading the panelrestore.sh but it wont allow me to extract the .tar.gz file see the message below..tar: This does not look like a tar archivetar: Skipping to next headertar: Exiting with failure status due to previous errors
I'm still somewhat of a n00b to ubuntu, so please excuse the probable fail of this post.So a while back i dual booted Ubuntu along with my Windows 7 operating system.I'm trying to navigate to the directories in my Windows partiion, which includes a C (0S) partion and D (Data parttion).
df yields david@david-laptop:~$ df Filesystem 1K-blocks Used Available Use% Mounted on
I'm in Ubuntu and want to navigate the directories of a Windows box upstairs. I can see it and navigate around the shared folders using the file browser (the address bar shows smb://computername/shared-directory/) but how do I navigate around using the command line? The IP addy of the upstairs computer is 192.168.0.199.FYI: If this is posted somewhere else I couldn't find it
My computer has different time when booting to linux or Windows.How to make the time the same?My computer time is 10:57pm Apr 14 when booting to linux.My computer time is 2:57am Apr 14 when booting to Windows Vista Home Premimum SP2.Both OS are set to the same time zone (GMT-5. Eastern Time US & Canada).
I am using ubuntu 8.04 with GNOME. gnome-terminal version is 2.22.1
(1)Is it possible to use mouse to move cursor to desired position? For instance , I am at end of line & with mouse I can select a portion of line to copy but cannot move the cursor to middle of line without pressing left arrow key for looong time.
(2)I have noticed that if I boot with my USB in non-persistent mode.In the beginning I can use ctrl+arrow to move to previous or next word. After sometime ctrl+right arrow append ;5C and ctrl+left arrow appends ;5D
I'm trying to install Flash Player 10 (to access Hulu) with no success. Here are the instructions Adobe gave me:
1. Click the download link to begin installation. A dialog box will appear asking you where to save the file.
2. Save the .tar.gz file to your desktop and wait for the file to download completely.
3. Unpackage the file. A directory called install_flash_player_10_linux will be created.
4. In terminal, navigate to this directory and type ./flashplayer-installer to run the installer. Click Enter. The installer will instruct you to shut down your browser(s).
5. Once the installation is complete, the plug-in will be installed in your Mozilla browser. To verify, launch Mozilla and choose Help > About Plug-ins from the browser menu.
When I'm in the terminal program, I type this in but don't get a response. I'm not sure how to navigate to directories...
I have a desktop PC with Fedora, Ubuntu and Windows installed and grub used for multibooting. But time in Fedora is always 5 hours behind. If I change the time in Fedora, then Windows and Ubuntu will be 5 hours ahead of the current time. I don't understand how to fix it.
I have windows vista installed on my laptop and i wanna have a linux too. i dont wanna lose my windows. which distro allows me to have my windows and installing linux at the same time??
I have a home build computer that has data corruption problems at boot time. I have exhausted all the troubleshooting steps that I know to try. Do you have any additional troubleshooting techniques that I should try?
Symptoms: I run both linux(ubuntu, mint and fedora) and win7 on this machine.Sometimes I have just one installed.Other times both in a dual boot setup. The OS installs just fine.The system runs just fine for a while.Then it fails to boot.At first I can fix the boot problems with grub or bootrec (/RebuildBcd, /FixMbr or /FixBoot) as indicated by the error messages.Eventually the system fails to boot at all and I have to wipe the disk(s) and reinstall the operating system.The linux installs seem to last a bit longer. I typically have linux running for a month before the troubles start, but I have to repave and rebuild within 3 months. The windows installs last at most 2 weeks before troubles develop. The system is turned on for the day or evening then turned off overnight.Once the system has booted all checks that I have run pass. On windows fciv.exe, sfc.exe have never deteced and troubles. On linux tripwire shows everything unchanged. Chkdsk and fsck have never reported errors.
Hardware:ASUS M3A78-EM motherboard. 2x2GB kingston memory from the ASUS QVL for this motherboard.I have used two hard disks in this system.WD caviar black 640G (WDC WD6401AALS-00L3B2).Seagate barracuda 7200.7 (ST3120026A).On some rebuilds I have used just one of the drives, sometimes I have both installed.The DVD burner is a LG 4x (HL-DT-ST DVD-RAM GH22NS30 ).The power supply was originally an el-cheapo Allied unit that came with the case.That has since been replaced with a Seasonic X650.And that is all that is in this system. I use the onboard video, sound and network. I have never plugged an external device into the system (not even a USB flash drive!).
Trouble shooting so far...I have run the memtest utility from both the ubuntu CD and the windows DVD many times. Even when run for several day neither test utility has ever found a memory error.I have run the seagate and western digital provided test and diagnostic tools on both of the hard disks. I have done this on both the unstable ASUS M3A778-EM system and a very stable gateway system.I have swapped out the HDD cables several times.I have replaced the cables with new cables and with cables pulled from a stable system.Because the corruption happens only at boot time I suspected the power supply was having problems under the extra load of disk spinup.So, I replaced the power supply. No success.
I have run the system with every version of the MB BIOS from the version that it shipped with to the latest and greatest. The BIOS upgrades made no noticeable difference.I have enabled and disabled automatic updates on both win7 and ubuntu linux. That made no noticeable difference.That is it. That is all the troubleshooting ideas I have had.
I am about to work on getting the workstations on my network here to be connected to the Active Directory on my Windows 2003 server using Likewise Identity Service. of the security requirements is a good time sync, so I am trying to setup my Windows server time server on my CentOS machines. These machines dual boot Windows 7 and CentOS 5.5. I am using the Windows server as a time server and it's getting its time from its CMOS.llowing a microsoft kb article. I removed all the time servers from the CentOS box I am experimenting with and added the IP of my Windows server, it seems to connect ok but theime never gets updated.Oh, and this network has no connection to the internet it's cut off from the world, so sad and lonely and cannot get internet time
I am currently dual booting between Linux Mint 10, and Windows Vista SP2. Wireless works fine in both these OSes, but when I quit Mint and load Windows, 70% of the time my wireless stops working.
ie, it does not detect any wireless networks nearby, althought there are tons of them.
Restarting the wireless device doesnt help, I have to restart my computer at least 4 times for wireless to start working again.
And as of now, my wireless in Linux Mint has stopped working.
I upgraded to 11.04 with pretty much no issues. But, I do have one: When I opened "Files and Folders" in Dash and clicked on a .jpg image, a GNOME-looking dialogue popped up asking me which program I wanted to use to displayed the image. So, I went to make sure that opening an image on my desktop had the correct results. It did, and opens in Eye of Gnome. I messed up and made a typo, and now when I try to click on ANY folder or file in Dash, it says that it can't find the program "E" (which was my mistake/typo/whatever/I didn't finish typing and had a twitch or something xD). I cannot figure out how to set Dash to open [x file] with [x program].
Apparently I have some broken links in /usr/bin/hich causes nautilus to crash and restart. If I navigate to /usr/bin/ using gnome-commander I can see the files, as well as using terminal
I have installed a CLI ubuntu system and then installed gnome-session and all the applications I needed. Yesterday I have installed Firefox 6. Addons added are :flashblock, adblock + and noscript addons. Now the weird thing is that today while navigating on this site: [URL]. I get Godaddy Page.
I'm trying to get more acquainted with the terminal but have run into a problem. I have a flash drive that originally had a name that consisted of numbers and letters. After using the flash drive on Windows recently, I saw that its name had changed and now contains special characters (the name is now �NPM=:�N). It poses no problem when navigating through folders graphically, but because I usually have multiple external drives and the first character of the flash drive name is a special character, I have no idea how to 'cd' to the flash drive from the terminal. So the only solution I see is to either type these special characters in the terminal or somehow cycle through all the folders in /media with the keyboard.
Whenever I navigate into a folder containing video files, my entire system freezes/crashes. The keyboard, video, and the entire system become entirely unresponsive.
I can recreate the problem every single time by simply opening a nautilus window, then going into a directory containing 1 or more video files (avi, mkv, mp4, etc.). It doesn't seem to matter whether I stay in the folder, or quickly navigate away either. Seconds later, the system freezes entirely, to the point where my capslock key does not even toggle the capslock indicator.
I first noticed the problem when I installed 10.10 months ago on my Acer AspireOne D250. I had recently upgraded to ubuntu natty beta hoping the problem might have been fixed.
Loading up gedit (as an example) I am unable to navigate reliably using keyboard navigation controls with the new Unity interface. There are times when left/right will work within a document but up/down will not. After a reboot left/top/right will work but down will not unless you physically click on the position you would like the cursor. I'm guessing unity unity is stealing these keys but not releasing them back to the applications?
I'm the only person seeing this: xpdf is slow to render PDFs and navigating through a document is ponderous. The problem is there on my laptop ( Core i3 ) and my desktop ( Core i7 ). I played with the ./configure options in the Slackbuild and deleting the -mtune=i686 option made it much more responsive. It's so bad I've got Debian on a separate partition and I boot into that if I need to look at PDFs.
I have a linux (Slackware) machine and the time/date is like, June 23rd 2003, 10:00am (It's 11 here) and I am not able to set the time to have it correct. I change the timezome to Montreal but the time is still wrong.
Is there a way to force it to sync with my domain controler or even another online NTP server?
I'm just wondering what the limits for time are. I have a program that always takes exactly 20 ms, so I assume this is the lowest it can measure, but I want to see if there's some sort of documentation of this.
get the values for the user time and system time for a process.i have tried getrusage to get values of ru_utime and ru_stimebut these don't seem to be correct
I admit this has been a particularly bad year for me, but it isn't THAT unusual by my standards. I typically spend I would reckon quite honestly about 70-80% of my time with computers just fixing stuff up that either I broke or was broke in the first place. Usually it's the latter by some considerable margin. That's really inefficient, isn't it? I just wondered what others' experiences are of this phenomenon. Obviously I don't do computers for a living or I would have starved years ago. So what is the Panel's consensus view on the percentage of wasted time we should expect to spend, on average, "running just to stand still" on maintenance tasks?
I have two dual boot systems, each running Fedora 11 and a version of Windows.When I boot into Windows after running Fedora on either, the Windows time is wrong and I have to reset it. But, if I reboot from Windows into Windows, the Windows time is right . I think this results from different ways Fedora and Linux keepi track of time and what they do to the real time hardware clock.Could someone explain exactly what is going wrong and how I can resolve the problem?
I want to focus two windows at the same time on the same pc. Is there a way to do that so I can have two games running at the same time so another person can play with me?
Is it possible to open two windows of gedit at the same time, as I want to compare the contents, line by line, of two pages of g-code for trouble shooting ?
I was created one folder in linux with current time was 1978(For example). I was moved this folder to usb(FAT32 file format).While seeing this folder in window its not showing the folder time created time stamp, because the USB file system only support the year after 1980 . But again i am putting the same folder in linux ,its showing the correct time stamp.How is it possible? Because FAT32 only supports timestamp after 1980, but still its showing 1978 in linux system
I was working with timezones when I came across a very strange error. Date command showed Invalid date/time when I set the date/time to 27 Mar 2011, 02:00:00. On further analysis, I observed that the time was jumping to 03:00:00 after 01:59:59 when the date is 27th Mar, 2011.
I'm running windows 7 and the F12 Beta (although the same issue existed in my f11 distro) on an asus g71 bb. When ever I boot into windows my time is correct. If I boot into to F12 my time is wrong. Usually by 4 hours. If I change it in Linux when I boot into windows I end up switching the time on my windows partition. I tried searching the forum (rather casual I'll admit) and couldn't find any solutions.
I have a new dell studio 1558 with core i5 processor and 4 gb ram. I just installed ubuntu 10.04 and every time i boot into my windows 7 partition my grub seems to stop working. The only solution i have found so far is to re-install grub using the live cd, but it is not feasible to do that every boot. Is this a standard problem(or is there a solution to this problem)? Also, I havent updated my ubuntu yet, will that help?
