I have a big database, which should "build up" before receiving requests, so i need httpd to start about 3 minutes after mysql start, so it prevents the visitors to start querys to the database, and making server load high. How can i do this.
View 10 RepliesAlright, so I installed the c5-testing versions of httpd, php, and mysql, since my server is used for other daemons primarily and these aren't used as production servers I decided to test the bleeding edge versions of these, report any bugs I find, etc. The problem is, since I updated httpd and mysqld they no longer start up at boot. I tried using chkconfig --add with both of them, but both their init.d scripts have - for levels, so I did not assign any levels. They still do not start up at boot. [URL]
View 2 Replies View RelatedI have installed fedora 13 in my system. httpd server is also installed. when I tried to start the service of httpd, following error message displayed: Starting httpd: (98)Address already in use: make_sock: could not bind to address [::]:80
View 1 Replies View RelatedI wish to install httpd and mysql server softwares via YUM and i added rpmforge rpm, which installed the following content in my /etc/yum.repos.d/rpmforge.repo.....But, when i did a yum clean all and yum install httpd, it is not working.What should I do to get the RHEL5 packages from mirror sites such as rpmforge or epel5 without registering with RHN?
View 5 Replies View RelatedIm having problems getting the httpd service to start. Instead of clearing my log files in var/log i accidently did a force remove command on all the log files within the log directory. I'm not unable to start my httpd service and of course unable to check my log files to see whats what.
View 9 Replies View RelatedI configured httpd.conf. With ip, port 80 and specified the document path correctly. But service httpd restart shows httpd stop fail, httpd start fail.
View 1 Replies View RelatedI configure my apache and can run http://localhost. There "I see it works!" but if I try to stop apache I get message that httpd is not started. I run
apachectl start - ok
but when I run apachectl stop it says "httpd (no pid file) not running"
I need to stop apache, because this is my dev machine and I want to start apache only when I make changes to my site. I am with slackware13.
I have centos 5.3 installed, while restarting httpd service I get error starting http:/bin/bash line 1 9941 segmentation fault /usr/sbin/httpd. If I stop httpd service and start it will start but if make service httpd restart it give above error.
View 1 Replies View RelatedI m using apache http server for hosting a website.
Whenever i start httpd service 8 apache processes get triggered . Is it normal? Is apache is default application server like IIS in windows?
Quote:
top - 15:49:15 up 8 days, 22:53, 3 users, load average: 0.73, 0.77, 0.91
Tasks: 125 total, 1 running, 124 sleeping, 0 stopped, 0 zombie
Cpu(s): 0.8% us, 8.0% sy, 0.0% ni, 91.2% id, 0.0% wa, 0.0% hi, 0.0% si
Mem: 2064720k total, 2017072k used, 47648k free, 204452k buffers
[Code]....
I did a clean install of Ubuntu 11.04 64bit and the start up time is abnormally slow. If I start up the computer and don't press anything, the start up time is 30 minutes but it usually doesn't start up at all. It just boots into a purple screen, no splash, then it sits there and the computer doesn't have any loading lights flashing.
I had a similar problem with 10.10, but I assumed it would go away when I did a clean install of 11.04.
I can't get a read out of what's going wrong because when I press Esc it doesn't display anything, though weirdly it can sometimes get the start up process moving. I have also found that pressing enter really fast can sometimes help and something that seems completely oxymoronic, if I press the power button while it's starting up that can make it work, but nothing works every time.
I just installed FC12 x86_64. After a clean install I found that httpd, mysql, svn, svnadmin, etc are already installed. I still need to install and configure tomcat running as a worker behind httpd and configure everything. But my question is about security. What do I need to do to ensure that when I start httpd and mysql that they are secure? Are there default settings that I need to change? Are there security patches I need to apply?
System Config:
Fedora Core 12 x86_64
AMD Athlon II X2 250 3.0 GHz dual core
GIGABYTE GA-MA785GM-US2H
G.SKILL 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) Dual Channel Kit Desktop Memory Model F2-8500CL5D-4GBPK
I'm using mencoder to capture audio from a Encore ENLTV-FM3 video capture device. I have recently noticed that, since one week ago, when the machine was forcibly restarted due to a power outage, all recordings are slightly pitched, they play back slower than they should.
I narrowed down the problem to the following command line:
$ time mencoder -really-quiet -tv driver=v4l2:device=/dev/video1:chanlist=us-cable:audiorate=32000:alsa:adevice=hw.1:input=0:amode=1:normid=11 -endpos 00:10:00 -ovc copy -oac pcm -of rawaudio -o test-32000.wav tv://69
real 9m54.886s
user 0m5.536s
sys 0m1.740s
$ ls -l test-32000.wav
-rw-r--r--@ 1 martin martin 76800000 Mar 15 17:20 test-32000.wav
Somehow, mencode managed to gather precisely 10 minutes worth of raw audio in 9m 55s. That's not physically possible, unless the capture device's A/D converters are "overclocked". I can't think of any other explanation besides hardware failure. Can that be? Could it be that something got burnt during the power outage and now the capture device's internal clock went nuts?
Since the machine's restart, I've also noticed dmesg is flooded with entries like this:
CE: hpet increased min_delta_ns to XXX nsec
Which seem to indicate that the computer's high precision event timer is somehow out of sync. Does this have to do with the audio issue? Can it be that the audio converter's sample rate is linked to the HPET? I'm totally lost here. Has anyone bumped into something similar?
I thought that the problem is in the phpMyAdmin not in the mysql. But now i think different. It seems that the problem is right in the mysql. I think that there was no root user, when mysql was freshly installed. Unfortunately i did everything i can find on internet (some tutorials) but they don`t helped me at all, maybe i fu**ed up the mysql service. So i reinstalled it, and when i want to start it there is no file mysql.sock and i get the following:
linux-nepg:~ # service mysql restart
Restarting service MySQL
Shutting down service MySQL done
Starting service MySQL warning: /var/lib/mysql/mysql.sock didn't appear within 30 seconds
I installed MySQL and I want the service to (always) start. When I google I always find the same answer; Goto System > Administration > Services. But I don have it. Administration for me goes from 'Printing' to 'Software Sources', so there's no 'Services'...
Also should I be able to start it from a shell, but I also can find that. (I have no /etc/rc.d/-directory and my /etc/init.d/-directory han no 'mysql'). I just started using Linux a few days ago (I only used MaxOsX and Windows before).
I am trying to set up my httpd on CentOs 5.5 I did some searches and found this link. [URL]
rpm -qa |grep -i httpd
httpd-2.2.3-43.el5.centos.3
I created the ssl files as they described but still it wont start.
ervice httpd start
Starting httpd: [Wed Sep 01 09:25:57 2010] [warn] NameVirtualHost *:80 has no VirtualHosts
[FAILED]
cat ssl_error_log
[Code].....
I'm trying to start the mysql server on fedora 12. service mysqld start gives me an error:
MySQL Daemon failed to start.
Starting MySQL: [FAILED]
More details
[root@localhost mysql]# which mysql
/usr/bin/mysql
[root@localhost mysql]# mysql --version
mysql Ver 14.14 Distrib 5.1.46, for redhat-linux-gnu (x86_64) using readline 5.1
And also I get a weird pop in the notification area regarding some security threat
SELINUX is preventing /usr/libexec/mysqld "read" access on plugin.frm
installed mysql
type
yum install mysql
tells me nothing to do - up to date
type mysql
responds ERROR 2002 - cant connect to local MYSQL server through socket
/var/lib/mysql/mysql.sock
Lost in tons of documentation - sun docs very general and maybe its there but I'm getting dizzy looking. How to get to the point where I can get an mysql> prompt?
On this system httpd does not start on boot. I can manually start it without errors with service httpd start.
Code:
chkconfig --list httpd
httpd 0:off 1:off 2:on 3:on 4:on 5:on 6:off
Where do I look to see why it wont start?
I rebuilt my box with Fedora 14. installed httpd, mysql php etc. when I tried to start my httpd it was giving me error about finding the root document and server name I was able to fix temp the issue with the name by placing ServerName 192.168.1.105:80 in the httpd.conf file and the root document somehow was fixed also. but I am still can't start the httpd and no error message except that it failed. I also disabled Selinix but still no luck.
View 11 Replies View RelatedI am using fedora9 server I installed & configured httpd ,mysqld & heartbeat service its well and running but every 10 to 15 days httpd service is stoped when I tried to start the service
I am getting this below error:
#sudo /sbin/service httpd start
Starting httpd: [Mon May 09 09:03:07 2011] [crit] (17)File exists: Failed to create shared memory segment for backend 'XXGLOBAL'
I checked httpd pid
#ps -ef |grep httpd
526 7553 7194 0 09:06 pts/0 00:00:00 grep httpd
I googled and run below the commands:
#ipcs -s | grep apache
I didn't get any out put:
#ipcs -s | grep apacheipcs -s | grep apache | perl -e 'while () { @a=split(/s+/); print `ipcrm sem $a[1]`}'
deprecated usage: ipcrm {shm | msg | sem} id ...
usage: ipcrm [ [-q msqid] [-m shmid] [-s semid]
[-Q msgkey] [-M shmkey] [-S semkey] ... ]
deprecated usage: ipcrm {shm | msg | sem} id ...
usage: ipcrm [ [-q msqid] [-m shmid] [-s semid] .....
I got the out put below like I wait 5 to 10 min but the proses will going on I killed the process I tried to start the service but I got same error. When I restarted my O/S the problem is rectified but every 10 to 15 days same problem I am getting.
I checked http error_log file:
# tail -f /var/log/httpd/error_log
[Mon May 09 09:46:01 2011] [crit] (28)No space left on device: mod_rewrite: could not create rewrite_log_lock
Configuration Failed
[Mon May 09 09:48:01 2011] [crit] (28)No space left on device: mod_rewrite: could not create rewrite_log_lock
Configuration Failed
[Mon May 09 09:50:01 2011] [crit] (28)No space left on device: mod_rewrite: could not create rewrite_log_lock
Configuration Failed
[Mon May 09 09:52:01 2011] [crit] (28)No space left on device: mod_rewrite: could not create rewrite_log_lock
Configuration Failed
[Mon May 09 09:54:01 2011] [crit] (28)No space left on device: mod_rewrite: could not create rewrite_log_lock
Configuration Failed
Recently I installed an SSL certificate from GoDaddy on my Amazon EC2 instance which runs CentOS 5. All has been good till I installed the SSL certificate. Everytime I restart the system it fails to have httpd service working because code...
I looked on the net and found a solution which says I should change port 80 and port 443 in files httpd.conf and ssl.conf to port 88 and 553 and restart apache, change back the ports to 80 and 443 and restart again. This method worked before but now I am stuck with it not starting with ports 80 and 443 and if I change these ports then I can't reach my site and I have to add port number wtih : which is really not good.
1- What causes this problem and where can I look to debug it?
2- What can I do to permenently stop this problem? is there any place that I can dedicate these two ports to apache user?
I just upgraded to CentOS 5.6 (been on 5.2 for ages....) and am getting the following error in the apache error_log file:[Sat Jul 02 13:50:25 2011] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec)[Sat Jul 02 13:50:25 2011] [error] SSL Library Error: -8187 Security library: invalid argumentsThe notice entry, I can understand, however the SSL error is halting apache from starting. It has been suggested that this might be a package mismatch issue. I'll be more than happy sharing the package list for this box on request.
View 2 Replies View Relatedi'm new to Debian os and currently want to install php5 apache2 and mysql 5.1. But ive got problem to start the mysql services.The error on command prompt as belows:
[Code]...
I have just installed Fedora 11 on a "fresh machine" and everything works ok, except for Apache httpd
the message seen in the error_log is the following: Name or service not known: mod_unique_id: unable to find IPv4 address of "myserver"
I'm completely stumped by a problem with httpd in Fedora 13. It fails to start on boot: I can see: Starting htpd: FAILED, in /var/log/boot.log, but I can't find anything else in messages, audit.log or anywhere else that gives me any clue why. The weird thing is that running:
run_init service httpd start
after boot _works_ and the server runs fine, but even when it's running OK,
service httpd status
reports
httpd dead but subsys locked
I'm guessing that the problem somehow relates to selinux, but I can't find anything in the audit logs that gives me a clue. How to turn on more logging so that I can get closer to the problem. I finally discovered the cause. This system was originally configured to use network services directly, without NetworkManager. It had been upgraded a number of times since installation. It seems that over time, if you have turned off NetworkManager, the defaults have changed. Used to be that the network services was 'enabled' by default (hence started at run time). Now, the default is 'disabled'. Httpd couldn't start because there was no network to start on. Enabling network services at boot time fixed this. I guess I should have noticed this. But one might think that httpd failing to start because of the lack of a network might at least give a warning message in the logs about the reason.
I have a mysql database and i use it with apache for my webpages. And I guess it dosen't start when the computer starts so I have to manually start it with "sudo /etc/init.d/mysql start" This returns fail so i went to '/var/run/mysqld/' and the folder was empty. I don't know if this is the problem or not. How can I fix this?
View 9 Replies View RelatedI have fedora version 8 with mysql 5.0.45 installed. I have also installed drupal. Recently drupal gave me an error "error code 28". When i checked it out it seemed to be with the db. When i tried to created a db (for testing purposes) in root...i wasn't able to. so then i tried to restart mysql ...it stopped but unfortunately i have not been able to get mysql back up...i get a message saying
"Timeout error occurred trying to start MySql Daemon".
I have one problem regarding my web server. When I am try to restart my httpd service it shows...
[root@localhost ~]# service httpd restart
Stopping httpd: [FAILED]
Starting httpd: (98)Address already in use: make_sock: could not bind to address 0.0.0.0:80
no listening sockets available, shutting down
Unable to open logs [FAILED]
[root@localhost ~]#
I have several services set to start in init 3 on a cloud provider. The init scripts appear to be in the correct folder but the services are never started after a reboot. I finally watched the console and all the services start correctly then shutdown after a few moments.
View 9 Replies View Relatedi am using liferay5.2(mysql included in the download pack) on fedora. while liferay is working fine but i cannot connect to mysql.i am getting the error
[
[root@localhost ~]# ln -s /var/lib/mysql/mysql.sock /tmp
[root@localhost ~]# /etc/init.d/mysqld start
Timeout error occurred trying to start MySQL Daemon.
[code]....
i didnt find the mysql.sock file in the location /var/lib/mysql/mysql.sock. i cannot find the portal-ext.properties file also to make intial settings.