rpm -ihv Test-01.rpm --relocate /opt/Test01=/opt/Test02
while issue
rpm -ql it shows the file from /opt/Test02 that is correct
but when i query
rpm -qi Test-01
Name : Test-01 Relocations: /opt/Test01
it shows the old Relocation
For some reason, my Slackware 13.0 system has multiple problems.
When I do ldd /usr/bin/X | grep libpixman
I show a libpixman which is NOT in /usr/lib.
I've 32bit Slackware pkg 13.37 of PHP installation infophp shows
extension_dir/usr/lib64/php/extensions/
I have a 16GB Corsair Flash Voyager GT pen drive. It worked fine for some time but recently, I am not sure for what reason, it is showing to have only 7.56GB of space.
Is it possible to fix this or is it the pen drive physically damaged?
yesterday a tried to put Ubutnu 32bit insted of 64bit to try differences, but I have a little problem with some web fonts For example on facebook are texts messed... and it is same on a couple other websites, which has nothing common. (School pages, wordpress administration...) Fonts are wrong in all web browsers, but each browser shows them different. for example Facebook in Opera (text is messed) and login page in Firefox(text is missing...) So i think, it is not a problem with browser.
View 2 Replies View RelatedI just installed a CentOs 5.2 Linux server and I'm trying to configure Samba. The file names of files created from the windows workstation are ok, but the file names of files created from the Linux server appear with different names than them are supposed to have. I've checked the Samba configuration file but I can't find options for fixing this trouble. Samba version 3.033375
View 6 Replies View RelatedI've been running arch linux, with my clock set to UTC with no problem. Recently I installed slackware on a different partition. During the setup I chose to set my clock to 'local time' instead of UTC by accident. Now in slackware my clock shows the wrong time. Also in arch it shows the same wrong time.
I booted back into slackware and ran pkgtool to enter the setup again, and changed my time to UTC. But this makes no difference. My clock is still wrong in both slackware and arch. Do I need to reboot after changing my clock settings in slackware before it takes effect? how the clock or the setup works.
My connection manager shows wired connections and shows wireless as being disabled. here is some terminal info getting wireless going?
Here is a bunch of things I have tried and the results.
nixon@nixon-desktop:~$ sudo ifup wlan0
Ignoring unknown interface wlan0=wlan0.
nixon@nixon-desktop:~$ sudo ifdown wlan0
ifdown: interface wlan0 not configured
[Code].....
I'm encountering a strange problem. I need to open and forward all UDP and TCP ports related to VoIPtelephony (5000:32000) in the Suse 11.1 server that's acting as router/firewall in our setup. The ports must redirect to a Asterisk server in the local network. (This server has the IP adress 192.168.0.3)I've opened ports in Yast (Firewall>Ports>Advanced) and putted in some masquerading rulesirewall>Masquerading):0/0,192.168.0.3,tcp,5000:31000,5000:310000/0,192.168.0.3,udp,5000:31000,5000:31000when I do a nmap localhost I get:Starting Nmap 4.75 at 2010-01-08 16:52 CETInteresting ports on localhost (127.0.0.1):
Not shown: 991 closed ports
PORT STATE SERVICE
21/tcp open ftp
[code]....
The computer contains 2 NICs. Both were recognized during installation, however eth0 was designated as the primary card.
After installation, however, only eth0 shows up when I type ifconfig. ifup eth1 results in "ignoring unknown interface eth1=eth1"
How do I use the second NIC?
I have a older server I am working on that was setup by someone else which is reporting "Insufficient system storage" when trying to send mail.
Here is the output from df -h
Filesystem Size Used Avail Use% Mounted on
/dev/md3 4.9G 615M 4.3G 13% /
/dev/md5 997M 45M 952M 5% /boot
/dev/md1 7.9G 6.6G 1.3G 84% /home
[Code]....
When I go to these dirs using a scp client the files show 0 bytes. Same if I ls -s the dir contents. What is using all the space?
I've just upgraded from Debian Lenny to Squeeze. It didn't go as smoothly as I had hoped, one of the casualties being the proprietary nvidia driver I had previously installed. So I fixed that using the 'Debian way' rather than NVIDIA's installer, and that is now all fine. So far so good. However, when I boot up, pre starting X, my screen is a much lower resolution than it used to be (640x480, I think). Really chunky and ugly as it runs through the start up scripts. I assume that somewhere early in the startup scripts the nvidia driver is being loaded and set to a low resolution. Can someone advise me where this might be, and what to look for? Am I on the right track? I stress that this is before X is started. Once X has started the screen resolution is as I want.
View 4 Replies View RelatedI have a fresh installation of Banshee on my machine and I'm having a hard time playing MP3's - it just puts an X icon next to the song with no description. It looked under Preferences and didn't find any kind of enable MP3's option. Is there a specific bitrate or something I need? The MP3 in question came from iTunes.
View 1 Replies View RelatedThe system of my VPS is centos 5. I want to know if it is 32bit or 64bit. > uname -a Thu May 13 13:49:53 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux
looks like 64 bit.
But
> getconf WORD_BIT
32
Looks like 32 bit.
Which is correct?
I believe the linux of my VPS is 32 bit. Because I downloaded a 64bit mongodb, found it can't start. And when I downloaded a 32bit instead, it works well.
I havea tv show burnt to DVD-r using the Panasonic DMR-E50. Now I would like to play it on my pc. However, it is only recognised as a blank disc. Can you think of anything I can try to move this project along?
View 5 Replies View RelatedCreated partitions, some of them LVM, in a server, say A. Did the same for another server, B, but created one more LVM partition.
Installed RHEL in A, and some other applications. Made dump files for each partition of A and restored all of them them in B. No error in that process, except B wouldn't boot. Did chroot /mnt/sysimage and grub-install /dev/sda--still no good. B came to a halt with GRUB> dispalyed. <tried many things many times.. searching Googles..but w/o luck) Gave up, and restored the bootloader part using OS CD -- I say restored because now B boots ok and I can see application that I had installed in A. So far so good.
Problem: that extra LVM partition is missing! I did not knowingly overwrite it, so where did it go? Somebody is keeping it from being displayed!
Is it the grub.conf that tells the OS what to mount and what not to? If yes, problem is , grub.conf is missing in B. In A, it is in /boot/grub/. df -kh shows other partions (some of them LVM) just fine.. what is going on?
I tracked a file called menu.lst in a strange place, in /usr/share/doc/grub-0.97.. but I didn't see any entry that loads partitions.
I like using Ubuntu, the main reason I need and want to use it I can't. It's so frustrating and sounds (no pun intended) so basic to me.Al I need to do is record my radio show from a radio I have plugged into my iMac. That's right. For now, I am dual booting on my iMac until I can afford to buy a dedicated PC desktop just for Ubuntu.I can't believe that there seems to be no way for me to record my shows from my radio. Works fine when I boot into the Mac side and even when I use Ubuntu using VMware Fusion. When I boot into Ubuntu directly, Audio In in the Sound preferences doesn't seem to work. No audio coming through when I try to record from the radio.
View 2 Replies View RelatedWhen doing an install of Linux Mint, I accidentally installed on a partition that already had data on it, so now that partition has a clean install of Mint instead of the data that was there before.I was hoping that I could at least recover some of the data from this partition, so my questions would be what, if anything, could I recover, and how would I go about doing that?
View 2 Replies View RelatedI have a strange problem with my Ubuntu Natty virtual machine running under VirtualBox on OSX.One day last week, my clock on the top bar in Gnome stopped displaying the correct time (I'm not running Unity). I'm on GMT, so right now it should be 9:31, but it's showing 3:31, so I think it's something to do with TimeZones. If I go into the date and time applet, the time is initially wrong but after a second sets itself to the correct GMT Time. The timezone is correclty set as London and it makes no difference if I unlock and set it again or select manual or automatic from internet time.
From a bash prompt, the "date" command shows: "Tue Sep 20 03:33:35 CDT 2011".If I run "sudo dpkg-reconfigure tzdata" I am correctly set as London. Upon exiting the commnand I'm shown the correct London time, but then typing "date" again shows the CDT time again.The clock is correct in OSX. This has been working fine for a month or two - I think it stopped working after an update last week. Any ideas?
After deleting a ntfs partition, grub is giving me troubles. My fdisk -l gives:
Code:
Device Boot Start End Blocks Id System
/dev/sda1 1 3824 30716248+ 7 HPFS/NTFS
/dev/sda2 3825 121600 946035720 f W95 Ext'd (LBA)
/dev/sda5 3825 4716 7164958+ 7 HPFS/NTFS
[Code]....
I have one harddrive and a DVD drive. In the bios, the harddrive is mentioned first. So (hd0,5) should point to the /dev/sda6.
BUT when I start my computer, it returns to the grub prompt. The command root gives: (hd0,6).
Why? It should be (hd0,5).
At the grub prompt I enter: root (hd0,5) and configfile /grub/grub.conf and the computer boots fine to fedora.
How can I tell grub use the correct partition?
I'm running Scientific Linux 5.5 (equivalent to CentOS 5.5), and over the past two weeks, I have had a problem with my root partition filling up, preventing anyone from logging into the server.After searching for large files, and finding none, I was mystified when du told me that the root partition had only 660 MB of disk space used, whilst df showed it full. The problem was this: the /var/crash directory had been filled up by an 8GB crash file. Now, I'm a 'proper' sysadmin and make sure that /var has its own mount point, so the crash should not have touched the root partition at all. Except it did - instead of writing to /var/crash on /dev/mapper/VolGroup00-LogVol04 which is mounted as /var, it wrote the file to /dev/md0 directly, so when all the file systems were mounted, those files were hidden under the mounted /var.
View 4 Replies View RelatedI not a total noob to linux only a noob to apache.I am Running A lamp server on A VPS with myhosting.com. but try as i might i cant apache2 to load the right page. I have set document root to /slk/redretriever/ but when i load the page it still loads /var/www/vhosts/default/htdocs/.I cant figure out why please help.
View 5 Replies View RelatedI'm having some problems downloading some applications. I was hoping to download Gimp but it says that I'm having problems with the dependencies.
View 2 Replies View RelatedI try to add program to Kickoff menu with the menu editor, make settings and click "save" to save changes. System update configuration but nothing happen. The addend program does not appear int the menu. If I close menu editor the changes are gone. It looks like that menu editor can't save my settings. What is wrong?
View 1 Replies View Relatedi have a Archlinux PC working Squid like proxy server and SARG for read the access log from Squid. The Squid log only show me 192.168.0.0 making http request, i need show the local IP from each PC on my network. I read in other page i need rebuid squid with follow_x_forwarded option, how i can do that? exist other way ti do that?
View 1 Replies View RelatedI have OpenSuse 11.3, KDE4 and Latin American Spanish keyboard. For several days,when I put orthographic accent (tilde) to a word and this happens:"operaci�n" or "�ltimo" or "d�as" or "operaci`on" or "`ultimo" or "d`ias", as you see puts the accent wrong
View 3 Replies View RelatedI am running Xandros3.0.1 OC on the same PC with Win XP Pro. Connection to internet through Win XP works fine but whe I try to connect through Xandros I got following message: unsuccessful PPPOE initialization request.
What did I do wrong.
I ran a command chown apache:apache / and just about everything... i wanted to do it on a directory but it did it on complete server.
i unable to login to phpmyadmin and even all the databses are empty. any tips on how can i solve this.
I have been running to a strange problem. For a few days, a few times a day something seems to take over my machine. Suddenly I can't type, or the key shows up about 5 seconds are being pressed, music players halt, etc. In anticipation, I had top and htop running. Sure enough, when this business begins htop reports all 8 cores firing at near 100% for a few minutes. However, top is telling me nothing about who is too blame. The cup%sy on top shows heavy usage, but the top processes are nothing remarkable, mostly just top and htop and conky, all running at around 1 or 2% on average. I am a bit puzzled as to why I can't see the cpu hog so that I figure out what is going on. My question then: Are there some processes (in kernel space?) that don't show up in top, yet which could be hogging the cpu?
View 3 Replies View RelatedWhen I see the umask value in a linux machine usually it shows 0002. I understand last three digits (002 in 0002) what is first 0 for?
View 2 Replies View Related