One of my prospective clients called in a panic. His registrar/hosting company has gone under and everything has been shut down so using dig on his domain only reports the verisign root server:
Code:
jaith@sansebastian:~$ dig domain.com all
; <<>> DiG 9.5.1-P3 <<>> domain.com all
[code]....
I have a domain name registered in asianet.com, they provide email service also, can i use local mail server and registrar's smtp server at same time?
View 5 Replies View Relatedup until last Saturday I had a Kingston Data Traveller G2 16 GB, running Lucid, never had a problem, then asked a friend if I could plug it into his Windows machine to check E-mails, and nothing. It doesn't even mount in Lucid now, not picked up by Gparted, it is recognised in XP, and shows up as Drive E: with the following:- Drive E: is not accessable, incorrect function.
I can't format the drive, can't do anything with it. This drive cost me 40 smackers peeps, so you will understand why I am loath to Bin it, plus it cost me another 40 to replace it.
I want to give Administrator privileges to Root user in Linux Domain Controller
View 12 Replies View RelatedI want to host 5 websites on my new virtual server so I have created 2 nameservers that point to my virtual server's IP addresses as a glue record. What confuses me is when I create a new domain on my server it gives the new domain it's own nameservers (ns1.thenewdomain.co.uk etc) do I need to change these records so they use the nameservers I created earlier? If I do? Which particular records should I change? I'm running a Unix virtual server with a Plesk control panel.
View 2 Replies View Relatedi have a windows domain and linux ftp server. OSs windows 2003 server and centos 5.5. i would like to integrate this file server to windows domain. And would authenticate users from windows domain.
View 4 Replies View RelatedI was wondering if there is any way to enable an MS Windows client that is otherwise unable of joining a domain to join a domain controlled by (open)SUSE? Is that inability only for joining a Windows based domain but a client that runs XP Home Edition or similar domain- incapable version of Windows could join a domain if it was controlled by Linux?Pardon my newbie style, but answer doesn't have to be detailed step-by-step, just yes/no answer with some pointers would do. I am not new to linux but new to network services... search engines weren't friendly when asked this question at the search bar...
View 2 Replies View Relatediam using centos5.2.configured qmail,vpopmail. while adding domain form vadddomain<domain.co.in> At first time domain folder get created in domains directory.and also postmaster user also get created by default.And also in mysql. Now the problem is after some times or rebooting system domain get erased automatic.also in /var/qmail/users/assign file domain name get erased.
View 1 Replies View Relatedi had created domain but not getting domain in /var/qmail/user/assign file.also it error /home/vpopmail/bin/vdominfo abc.co.inInvalid domain name
View 2 Replies View Relatedi have registered two domain names that i want to use to connect to my ubuntu server. I was wondering how to do this i was looking at bind9 but that didn't work that great. The server is behind a router with firewall i can connect to it using the external IP address but i like to use the two domain names if that is possible.
View 3 Replies View RelatedAt work, we run Windows... Windows domain, windows workstations, etc. Today my boss asked me my thoughts on running an Ubuntu lab within the mixture of our existing Windows setup.
Well, that brought several questions to mind. So I understand you can bind an Ubuntu computer to a Windows domain, seems easy enough, whether you do it through Samba or the other guide I read that I kind of forget at the moment, but anyway...
I was just curious how Ubuntu interacts with domain users when on the windows domain. For example, if we have an Ubuntu machine on the Windows domain with a local user "administrator" and that's it, would any domain users be able to log into the Ubuntu work station, similar to how it is on Windows?
i need to allow window domain controller user to use file share of linux.windows DC user can see the share file and directories of linux file server but not able to access.
below is brief--
I have a Linux machine which is on my network but not on my domain. I have configured SAMBA FILESERVER for file sharing purpose. I have a Windows XP PC which is on the domain(windows server) that I am trying to connect to a share on the Linux box. I supply my credentials but regardless of which login I use I always get Logon Failure. I have created an account on the Linux machine with the same user name and password as my domain account but so far no luck. Can I connect from a domain PC to a non-domain Linux box? Is there something else I should be checking?
I'm working for a smallish non-profit that has gone through some recent growing pains. We have two sites that are currently without a domain controller, and no money for MS licenses, so I was thinking of trying to add a couple of additional Linux machines (we already run Linux for web services internally, and I've set up a test case previously to see if I could get a server to join the domain, which was a success) and was trying to find out if I can get them to act as Domain Controllers without replacing the domain. The main issue that I'm having at those locations is drive mappings are not happening correctly against our DFS file servers. The one other location that had this issue had it go away when we added a local DC. The domain is a Server 2008 domain.
View 2 Replies View RelatedThe company I work for, as usual, is Microsoft-centric. I'm attempting to integrate my Ubuntu server into the domain to allow domain users to authenticate to the server and access file shares using Samba. Here's my current configuration:
[Code].....
I was ill a few days ago and in bed stumbling LOL cat pictures when I got hammered by a drive-by trojan. I'm sure I will have to do a complete install of windows and all my stuff, but I wanted to get the pc working to the point where I could move files off one drive to another.
So, I started trying out various linux based rescue cd's, Avira, BitDefender, F-Secure, and all off them will not connect to the internet. I have a att two wire modem set to bridge mode and a linksys router. I'm using this set up to send this message with off my laptop wired to the router. Also, from my laptop I can view the shared folder on the infected pc. So, to me it seems that it should work.
I did have to replace the onboard lan with a pci lan card, but I did turn off the onboard lan and the (cheap) lan card shows up on slot 1 using irq 10 during post.
I have always faced issue using the rescue disk in linux. Whenever there is a kernel panic error or soemthing gets missing, I always have no clue though I am good in Server setup and application support.
View 1 Replies View RelatedMy customer has a domain hosted by me and he has another domain hosted by another isp. He would like to have this domain am hosted to be forwarded so thwt upon entering the url he should have the website which is hosted by this other ISP displayed (the url of the website be musked). How do i configure my DNS at achieve this?
View 1 Replies View RelatedI need to redirect a domain to a subtree of another subdomain , for example : [URL] should be redirected to [URL] How should I do this ?
View 1 Replies View RelatedMy Centos disk was full. when I remove all the big files, df and du command not show right size. I reboot my server and in to rescue mode, it alert "you don't have any linux partitions".How do I fix it?I not use LVM.my server mount:
/dev/sda1 on / type ext3 (rw)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
[code]....
i have used ubuntu 10.10 for some time i deleted the partition thats with linux in it when i restarted the system "grub rescue >"is the only one i was stopped at i cant enter my windows os
View 1 Replies View Relatedi am using ubuntu 10.04 lts and my computer crashed,when the computer boots all i get is:
code: grub rescue>
what commands am i supposed to use?
I got my wife to try Linux, so we set her machine up to dual boot with Windows. After a few weeks, she decided not to use Linux, so we deleted the Linux partitions using Gparted on a USB drive and resized the NTFS partition, under the apparently mistaken impression that Grub would detect that there was now no other operating system. When we rebooted, we got error: no such partition, followed by a grub rescue prompt. I've never worked with Grub directly before, so I have no idea what to do at this point.
View 5 Replies View Relatedi have a server which i have no physical access to, all i can do is boot in rescue mode from a live debian CD and i want to know of a way to install CentOS from iso image or maybe NFS? on that server using this debian live CD.
since it's live CD i can't mount the iso image and boot from it cos after reboot nothing will be preserved. so the case in breif is, i am booted form debian live cd and i want to install CentOS on the machine from that system using iso image
1 ) I have accidently installed RHEL5.2 in a lap which was already having Fedora14. Now the fedora grub is missing and i am unable to boot into fedora. also there is no Rescue option in fedora 14 live CD, it only have Boot, Basic video, Memory test but no rescue mode. so pls tell me how to get into Rescue mode and solve this problem
2 ) How to find in which partition it is installed eg do i have type (hd0,0) or (hd0,xx), i have on hard disk so the H.D.D number will be hd0 but what about the partition . how to find it.
I installed ubuntu 10.04 into an external hardrive connected to my windows 7 pc as i wanted a dual boot. The installation went find and ubuntu installed into some free space on the drive. When it rebooted i got the grub rescue screen. I booted into the live CD and ran the boot script
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #5 for /boot/grub.
[Code].....
I have shared few directories through nfs in my fedora 12 OS.Here is the output of few commands from the virtual machine running on CentOS in both normal and rescue mode
Code:
[root@localhost /]# showmount -e 192.168.0.3
Export list for 192.168.0.3:
[code]...
My laptop was running Vista just fine. I had and wanted to install Linux and chose Ubuntu. I installed it to a USB and booted using this USB. It installed just fine and ran fine one time as well!When rebooting and wanting to run Windows, I got the diskcheck screen and let it run. Windows booted fine afterwards.On my next reboot all I got and still only get is the following
Code:
error: unkown filesystem.
grub rescue>
[code]....
I have both windows7 and Linux 10.04 installed in my system. The problem occurred on a forced shut down.The message which is appearing on the screen isgrub rescueNo such partitionNo command other than ls and set are working. Set shows root to be in (hd0,6). ls is not listing (hd0,6)The ls is not able to read any of the partition it lists and shows error:unknown file system.
View 1 Replies View RelatedIm using the System Rescue live cd to try and Clamscan a partition on my internal HD, but I cant mount /dev/sda3 (my home partition).
I use this commandline (as root):
Code:
mount -t ext3 /dev/sda3 mountpoint
but it just hangs, and then gives an error.
I have dual boot with Ubuntu 9.10 and Windows 7. Today, after using Partition Wizard on Windows to resize its partition, I got the following message when reboot:
Code:
I dont actually know what to do, I've been reading some threads on the internet but nothing equal to my case, only people who installed Windows after Linux and lost GRUB. Do I just need a live CD to reinstall GRUB? Can somebody tell what to do?
