General :: Postfix Status:master Dead But Pidfile Exist
Apr 26, 2011urgentlyostfix status:[COLOR="DarkRed"]master dead but pid file exist[/COLOR]
View 1 Replies
ADVERTISEMENT
Software :: Postfix - Master Is Dead But Pid File Exists?
Dec 21, 2010When I check the status of postfix I get this error..... what does it mean and how do I fix / troubleshoot it?
View 11 Replies View RelatedOpenSUSE :: Tomcat6 Status Results Into Dead State?
Feb 16, 2011When i start tomcat6 (on a SLES 11 box) two times without a stop in between, rctomcat6 status results into dead state.
I checked the rctomcat6 start script, in this case when the tomcat6 is already running and a rctomcat6 start is done, it display a msg that "process already running", but it continues in the start function further down & executes the TOMCAT_SCRIPT(dtomcat6) script with the start argument. And after that pid in the tomcat6.pid file gets changed but the process keeps running with the old pid, and hence when we do a rctomcat6 status, it results into dead state(bcoz it doesn't find any process running with that pid).
I think it shouldn't execute the TOMCAT_SCRIPT in this case, so in case when checkpid is success(in start function), i put an exit after the echo msg " process already running", this solves the problem, but is this the correct solution ?
function start() {
echo -n "Starting Tomcat ($CATALINA_BASE)"
if [ -f "/var/lock/subsys/${NAME}" ] ; then
if [ -f "/var/run/${NAME}.pid" ]; then
[Code]...,
Server :: Service HTTPD Status Dead But PID File Exists
Apr 14, 2011I am using CentOS 5.6 with Apache 2.2.17. The Apache was compiled from source using RPM build to comply with PCI requirements. Also Plesk 9.3 is used as a control panel, but other than the config files the Apache is pretty standard. When the httpd is started, there are no errors reported in /var/log/messages or in the error_log, and the httpd starts, shows up in ps and the pid file exists in /var/run/httpd.pid.
However when you check the status 'service httpd status' you get 'httpd dead but subsys locked'. You can add websites normally, and the proper config files are generated so I am pretty sure this isn't a control panel issue as I have other servers running the same control panel and Apache 2.2.16 compiled and installed the same way as the 2.2.17 and there are no problems.
Ubuntu :: Apt-get Upgrade System Or Install A New Package In Synaptic Or Terminal - Status Don't Exist?
Aug 11, 2011when I try to apt-get upgrade system or install a new package in synaptic or terminal, I see this:
Code:
dpkg: ../../../lib/dpkg/dump.c:250: w_status: Assertion `pigp->trigpend_head' failed.
E: Sub-process /usr/bin/dpkg exited unexpectedly
So, before I have a problem - Synaptic opened, told that /var/lib/dpkg/status don't exist, in the web I read that sudo cp /var/lib/dpkg/status-old /var/lib/dpkg/
Red Hat / Fedora :: NTP In Virtual Server - Error; # /etc/init.d/ntpd Status Ntpd Dead
Apr 1, 2010I am facing issue in ntp, it is getting killed frequently. see below error; # /etc/init.d/ntpd status ntpd dead but pid file exists After starting service it is works fine but again after sometimes it get in dead postition.
View 5 Replies View RelatedUbuntu Servers :: Postfix 'status=bounced' Unable To Send Email To A Domain?
Sep 8, 2010After a reboot of my VPS, I keep getting the following error when sending email to my domain (hosted on Google Email). I can send to other email addresses but my own. So it seems like postfix thinks all mydomain.co.nz is to be sent internally?
Sep 9 09:25:05 mydomain postfix/pickup[20784]: 0316C3CC68: uid=1000 from=<sidb>
Sep 9 09:25:05 mydomain postfix/cleanup[20806]: 0316C3CC68: message-id=<20100908212505.0316C3CC68@mydomain.co.nz>
Sep 9 09:25:05 mydomain postfix/qmgr[20783]: 0316C3CC68: from=<sidb@mydomain.co.nz>, size=326, nrcpt=1 (queue active)[code].....
How do I tell postfix that mydomain.co.nz is to be sent to Google email server?
CentOS 5 Server :: Creating New Service Scripts - PidFile?
Mar 17, 2009I am new to linux, running a brand new centos 5.2 server. One application I want to use it for is to serve as a network host for a game my friends and I enjoy. Normally, to run the game in host mode you call the binary and pass it a port number (along with other options). To host a second instance of the game, same thing different port, you get the idea.
After doing that the binary runs in your window and dumps to stdout, so if you want it to run 24/7 you have to come up with your own strategy like nohup. Fair enough, now, I'm trying to coax the game into restarting automatically upon reboot. The most correct way to do this seemed to be to write a script for init.d so that's the road I traveled down. Now, to strain the metaphor, the pavement has ended and I'm stuck in the sand.
Here begin my questions:
I've been following the structure of other init.d scripts and I notice they all seem to call the function daemon() (contained in /etc/init.d/functions) to start their services. Looking at the structure of daemon() I see that you can pass it a user and a pidfile. The user part seems to work fine, but no pidfile is created. Let me be more specific.
Like the other scripts, I explicitly touch /var/lock/subsys/game-port on startup, which works fine. However, all of those other services seem to have a pidfile in /var/run and mine doesn't. They don't create it explicitly in their init.d script therefore I assume that some other process is creating the pidfile. At first I thought it would be the call to daemon(), since you have the option of passing it --pidfile, but that doesn't seem to work.
Are the services themselves creating the pidfile? If that's the case then I have more complications because the game binary apparently doesn't do this. Second question but probably related to the first. None of the other init.d scripts I looked at seem to do anything special to detach their services from a particular terminal session, therefore I didn't think that I would need to either.
Again I thought this was something the call to daemon() might accomplish, but either I'm wrong or I'm doing something wrong. I can probably work around this with nohup or appending '&' or something, but I'm just curious that other services like crond, sshd, named, etc., don't seem to do this. Are they determining this behavior from within the binaries themselves? I hope this is clear, as I said I'm new so I may not be getting all of the terminology correct.
Server :: Local Master Browser Do Not Sync Their List With The Domain Master
Nov 13, 2009I'm managing a residential network. Each flat is its own subnet, and can only communicate with the other flats through a router (i.e. no broadcast). 95% of these 300 subnets only contains windows computers (from lambda users).
My final goal is to be able to browse the entire network from any computer.
I set up a samba server acting as a wins server, and every computer is aware of it because it is registered in the dhcp. So name resolution is working fine for everyone.
The same samba server is set to be the "Domain master browser":
workgroup = WORKGROUP
wins support = yes
prefered master = yes
local master = yes
domain master = yes
os level = 65
When I browse the network (using "net view" or "browstat view"), I can only see the servers which are in the same subnet as the domain master browser.
Now, when in a subnet the computers arrange themselves to find a "local master browser", the only visible computers are the one in that subnet.
What I don't understand is why all the local masters don't synchronize their lists with the domain master.
So, to sum up, every subnet get the following behaviour:
-if a local master is elected, the only visible computers are the one in the same subnet.
-if no local master is elected, the only visible computers are the one in the subnet of the domain master.
-if I add another samba, configured as a local master winning all elections, then the magic is working and the lists are synchronized.
What is expected:
-every computer can see all the computer from all the subnets.
Ubuntu Servers :: Postfix Make Install - Error - Postfix: Fatal: Chdir(/usr/libexec/postfix): No Such File Or Directory
Mar 11, 2010Here is what i do: make clean make makefiles CCARGS='-DEF_CONFIG_DIR="/opt/product/postfix-2.6.5/etc"
-DEF_COMMAND_DIR="/opt/product/postfix-2.6.5"
-DEF_DAEMON_DIR="/opt/product/postfix-2.6.5/libexec"
-DEF_MAILQ_PATH="/opt/product/postfix-2.6.5/bin/mailq"
-DEF_DATA_DIR="/opt/product/postfix-2.6.5/lib"
-DEF_NEWALIAS_DIR="/opt/product/postfix-2.6.5/bin/newaliases"
[Code]...
make install then i got this error: postfix: fatal: chdir(/usr/libexec/postfix): No such file or directory make: *** [install] Error 1 I don't understand why it's checking the usr/libexec folder for the daemons although I've set the folder to /opt/product/postfix-2.6.5/libexec in the makefile. Here is also the cat of my makedefs.out:
[Code]....
Server :: Setup Master / Master Mysql In HA Setup Without Use Of Load Balancer Provided By Host?
Mar 31, 2010I have a load balancer with 2 web servers behind it. The web servers rsync with cloud storage to update their apache directories 1 time every hour. Apache is just running php pages that pull/push data to a DB so they dont need to be updated that often. However I need to figure out how to implement a Master/Master MySQL setup to have my web servers point to for the PHP stuff. I need to implement it without having a single point of failure. The Load balancers are useless for failover as they only detect availability based on Ping request. So putting a master/master setup behind a Load Balancer is out. what is the best way to setup the master/master mysql in a HA setup without the use of a load balancer provided by the host?
View 2 Replies View RelatedUbuntu :: Twitter Status / Update Pidgin Status In Lucid
Jul 5, 2010I have just upgraded to Lucid on Ubuntu. I am a long time Pidgin user. I tried using Empathy with Gwibber, but I can't get Gwibber to update my IM status(es) in Empathy, so I want to go back to using Pidgin. (Additionally, I can't get Skype to work with Empathy.)I installed pidgin-microblog and pidgin-mbpurple, and they allow me to view my Twitter feed in Pidgin and update my Twitter status in Pidgin. However, in Karmic, I was also able to specify certain "status availabilities" (one named "Twitter-Available" and one named "Twitter-Away", for instance) to have the IM status message for these statuses become populated with my Twitter feed. This capability seems missing in pidgin-mbpurple in Lucid (and it seems to be the only thing missing from Karmic).
Is there a way to have pidgin-mbpurple update certain "status availabilities" in Lucid (and I'm just missing something) or is this no longer possible?Equivalently, is it possible to have Gwibber update my status message in Empathy? (I just want to be able to update my status once on one of my three computers - and have it propagate to all my other accounts (IM and social networking) and computers).
General :: Backing Up The Master Boot?
Mar 23, 2010I want to back up the master boot on my hard drive, in case something screws it up. What software do you recommend for this?
My first idea is to boot from a Linux CD and dd the first 512 bytes of /dev/sda, and dd it back to recover. Will this solution work, and is it safe?
General :: Fast Way To Become Master In System?
Nov 5, 2010I came across Linux in university syllabus and quite loved it.Hope I will get to learn here Linux. How to become master in Linux can some body suggest some fast ways to do the same?I want to learn Linux Very fast.
View 14 Replies View RelatedGeneral :: Ypbind To NIS Master Server?
Mar 25, 2010Problem: This morning, our NIS master server down (due to ram prob), and what happen is all the sun servers able to bind to NIS Slave, able to communicate to other sun and windows servers but not Linux servers.
Detailed Problem: sun_server[sab]% rsh linux01 o_ypcall: clnt_call: RPC: Unable to receive; errno = No route to host sun_server[sab]% telnet linux01
Trying 10.x.x.x...
Connected to linux01.
Escape character is '^]'.
[Code]...
General :: 802.11n PCI/(USB Okay, Not Preferred) Card That Can Do AP/master Mode
May 19, 2011I am looking for a 802.11n wireless card that Linux supports that can be dropped into AP/master mode.
I would prefer PCI, but USB would be tolerable, just not preferred.
General :: How To Transfer All Zone From Master To Slave
Mar 15, 2010I installed bind 9 sucessfully, and create many zones on its.
I want to biuld 1 slave server but i have problem :
How to transfer all zone from master to slave server ?
General :: Unable To Start Puppet Master?
Jun 27, 2011I was able to start puppet server using.
Code:
service puppetmaster start
but since i upgrade the puppet i m not able to start it.
Code:
# puppet --version
2.7.1
# service puppetmaster start
puppetmaster: unrecognized service
[Code]....
General :: Master And Slave DNS Server Replication
Nov 29, 2010I configured a master DNS server 192.168.2.10 working OK. After that I configure a DNS Slave Server (92.168.2.11)the initial replication worked fine. This is test environment for my certification. I see how the zones from my master are transferred
zones in Master
training.com.db
transferred zone to my slave when I started named service
sec.training.com.db
That's Ok but I added some IPs to resolve to my master zone
webserver IN A 192.168.2.30
fileserver IN A 192.168.2.31
I restart/reload named on master and after that I go to slave and restart/reload but zones wuth the new values are not replicated. How long does it take for slave to take the changes from master? how is the procedure manual or automatic? I see If I go to slave and delete sec.training.com and restart named the zone with the changes is transferred but that is very manual... I am including my DNS Configuration so you can take a look.
General :: Mapping With Series From Master File And Calculate Count?
Sep 7, 2010My shell script is calculating the count of each shortcode series wise whose sample output is as follows:
Code:
56882
9124 1
9172 1
9173 4
[code]....
General :: PCDCD Dead But Subsys Locked
Oct 11, 2010I cannot start the pcsc deamon :
Code:
[root@jonas ~]# /sbin/service pcscd status
pcscd dead but subsys locked
[root@jonas ~]# /sbin/service pcscd start
Starting PC/SC smart card daemon (pcscd): [OK]
[root@jonas ~]# /sbin/service pcscd status
pcscd dead but subsys locked
What does this mean and what can I do about it?
General :: Observiced Dead But Subsys Locked
Aug 3, 2011I'm getting error while starting some service in Linux.
# /etc/init.d/observiced start
Starting Oracle Secure Backup services... 2011/08/02.23:03:01 child didn't lock rock file - child never locked rock file (FSP rock file manager) [FAILED]
When I see the status it gives me as mentioned below.
# /etc/init.d/observiced status
observiced dead but subsys locked
General :: Dual Boot Via Wubi / Dead CD Drive And USB Not Available
Feb 24, 2011I have my old laptop TravelMate 2413NLMi 1GB RAM. My Cd drive works not well on most of the CDs. I don't know how it picks Win2K3 cd but in that also it gives problem. After some break it picks it up. Installed win 2K3 server successfully from CD Drive. That Cd is old and very good quality. Later I downloaded ubuntu iso 32 /64 both when I heard about dual boot via wubi. I wrote the ubuntu-10.10-desktop-i386 iso on 2 CDs with fastest and slowest speed both on my new laptop but that Cds not worked in the old laptop cd drive. Also my laptop not support USB as boot device in boot sequence. So USB install via usb creator cannot work. I also verified that Iso are fine by installing on someone else's desktop PC. Those cds work well there.
Back to my laptop: Then I copied all Cd content in a folder on desktop of Win2K3 with the help of my new laptop CD drive and usb drive I have. I run the Wubi on the desktop of Win2k3. It run successfully and in the end asked me to reboot. I rebooted. I got the 'Ubuntu' option on booting. I selected and came into it. After that ubuntu splash screen came and then following message displayed on screen
The Error:
mount: mounting /dev/loop1 on //filesystem.squashfs failed: Input/Output error
I got it this is due to the dead/faulty cd drive which ubuntu not able to mount. Now tell me how to install ubuntu further with the UI. Is there some special command to do this going in Grub pressing 'ESC' because the already specified modes have some commands on pressing 'e' there. Some way if I can use iso in that environment copying from USB. I need commands for that. I want to see ubuntu in action. I used lot of my bandwidth to download this iso files but still not able to see it in action.
General :: Fedora13 - HTTPD Dead But Subsys Locked
Jul 24, 2010I have installed fedora 13 recently and installed IDPS(snort) on it. But now I am not able to start service httpd. When I write service httpd start, it says OK, but I know it is a false message bcoz when I write service httpd stop it gives me Failed.
On writing service httpd status it gives a message:
httpd dead but subsys locked
I have tried "rm -f /var/lock/subsys/httpd" - no solution
yum update hasn't solved my problem as well.
I have to show my project running at my college. And I can not understand properly the technical instructions as I am new to linux.
General :: Download Linspire Live - Links And Both Are Dead
May 18, 2011I'm trying to download linspire Live. There are 2 download links and both are dead?
View 5 Replies View RelatedUbuntu :: Remove Gwibber Status Indicator / Gwibber Status In The Panel While Keeping The Shutdown Button?
Mar 16, 2011After a fresh installation of Ubuntu 10.10 I uninstalled empathy (im using skype). The empathy menu in the evolution indicator was gone after that.I also uninstalled gwibber. But the gwibber status indicator remains within the about-me panel... Uninstalling the gwibber package also removes the me-menu which I want to keep actually. Especially the shutdown/restart... part of it. See attachment.I know there is a shutdown panel-app...but its butt-ugly and it doesnt allow to logon/off.
In another thread I read that the gwibber status shouldnt be there if no account for it is configured... which it is not... I do use ubuntu-one though which is in the same menu... I saw that this issue was addressed at some bug report before, but not fixed yet...
Does anybody know a good workaround to get rid of the gwibber status in the panel while keeping the about me and the shutdown button?
General :: Way To Re-install Grub On Master Boot Record Of Hard Disk Using Live CD?
Nov 29, 2010Is there a way to re-install grub on the master boot record of a hard disk using a live cd?If so will i have to configure it?I'm trying to install a linux distro on my ao751h(with poulsbo ) but i after installing it i can't boot.I get an error 15 or a flashing underscore.I have already tried ubuntu,debian,mint and slackware(LILO isn't compatible with poulsbo).Also,does anybody experience problems with the ubuntu 10.04 and 10.10 installers or is it only me?when i choose the language and keyboard settings the installation stop as it is and i get a crash report.
View 4 Replies View RelatedGeneral :: Monitor Not Working As Expected With LiveDistros - Screen Is Totally Dead ?
Feb 27, 2010I have an Acer Aspire 6930g with an nVidia GeForce 9300m GS which has a broken screen. I have been using an external monitor for some time using Linux Mint, without issue.
I initially set this up with great difficulty using the small parts of the screen that would still display an image at the time. Now, however the screen is totally dead, I have since disconnected the laptop monitor in order to not cause issues.
The issue I am currently having is trying to use live distros.
I'll give you example: I boot ubuntu 9.10 32bit and it gets to the initial boot menu. I choose "Try Ubuntu..." It shows the loading screen. Screen goes blank when going to desktop
I tried Ctrl+Alt+F1 to get to a terminal, but the screen stays blank. The same thing happens with both Knoppix and Backtrack 4 as well. The display goes blank upon switching to the desktop.
Ubuntu :: Configuring Webmin Postfix Server With Multiple Postfix Virtual Hosts?
Sep 25, 2010is there any HOWTO for configuring Webmin Postfix server with multiple postfix virtual hosts? Seems to be a tough challenge to set it up without any easy manual..
View 1 Replies View RelatedCentOS 5 :: Postfix Mail Server Will Not Start Tried To Change Postfix Smtp Port?
Oct 4, 2010so i set out to change the default smtp port the server uses because my ISP blocks port 25 and i need the email to work in outlook. this morning i could receive email, but not send it. so i did some research and thought that i needed to edit the master.cf file in /etc/postfix/ by commenting out this line: smtp inet n - n - - smtpd -oand replace it with587 inet n - n - - smtpd (587 being the port i want to use)somewhere along the lines postfix server stopped running and now i cannot get it to start.if i try using SSH it crashes immediately and if i restart it in simple control panel nothing happens
View 7 Replies View Related