General :: Fedora13 - HTTPD Dead But Subsys Locked
Jul 24, 2010
I have installed fedora 13 recently and installed IDPS(snort) on it. But now I am not able to start service httpd. When I write service httpd start, it says OK, but I know it is a false message bcoz when I write service httpd stop it gives me Failed.
On writing service httpd status it gives a message:
httpd dead but subsys locked
I have tried "rm -f /var/lock/subsys/httpd" - no solution
yum update hasn't solved my problem as well.
I have to show my project running at my college. And I can not understand properly the technical instructions as I am new to linux.
I have centos 5.5 64bit installed. When I start the httpd service I get the above message. The message is bogus because the server is running and web pages work. Is there a fix out there to resolve this?
I've got a box with a fresh installation of CentOS 5.6, but had several configs copied from an old 4.8 box that I've now got to finish. Most everything seems fine, but I can't get apache running. It reports that it starts up fine, but immediately stops and reports "httpd dead but subsys locked"Most of the advice I've found while searching suggests to just delete the http.pid file and restart, which doesn't help in my case. I did find a few problems where SELinux was restricting httpd from creating or touching certain files (I found reports in /var/log/messages) but I've worked through that.
So the big question here is: /var/log/messages and /var/log/httpd/error_log are now empty, and don't show any more errors when I restart httpd. Does anyone know where else I can look for reporting/logging on what's happening to httpd to cause it to die?
I have installed httpd on Fedora 13 with yum, but it is not working when I type in a browser : localhost
Code: [comp42 html]$ sudo /etc/init.d/httpd start Starting httpd: [ OK ] [comp42 html]$ sudo /etc/init.d/httpd restart Stopping httpd: [FAILED] Starting httpd: [ OK ] [comp42 html]$ sudo /etc/init.d/httpd stop Stopping httpd: [FAILED] [comp42 html]$ sudo /etc/init.d/httpd status httpd is stopped [comp42 html]$ sudo /etc/init.d/httpd start Starting httpd: [ OK ] [comp42 html]$ sudo /etc/init.d/httpd status httpd dead but subsys locked [comp42 html]$ sudo /etc/init.d/httpd help [comp42 html]$ sudo /etc/init.d/httpd fullstatus Connection refused [comp42 html]$
Tried to reinstall several times, but nothing works. My firewall is disabled, does not work either while enabled. My httpd conf is the default one. What is going wrong?
I have cloned linux installation from USB drive to another. The system is Fedora core and it is used as a software for encoding live stream (it's using PCI encoding cards). The system works well on original hardware configuration, however when I use this cloned flash drive on another hardware configuration one service will not start. It is a "calld" service and it is a service which has a protection which limits its execution to original hardware platform only (mac authentication probably). I need to get this service up, so when I type command "service calld starts/tatus" or "etc/init.d/calld start" I get response "service is dead and subsystems are locked". I tried matching mac address to original hardware configuration but still the same. This is a config file of service /etc/init.d/calld
I also looked into the mail logs and found the following. Mar 14 10:15:43 quant dovecot: Auth process died too early - shutting down file or directory Mar 14 10:15:43 quant dovecot: child 4442 (auth) returned error 127
but I think I have a reasonable handle on the /etc/init.d, /sbin/service, chkconfig, and runlevels stuff under CentOS. However, when I install particular daemons (not part of CentOS distro), I get a weird issue. If I log in as root and do /sbin/service <daemon> status, it says "... is running...", however, if I log in as a non su, and do the same /sbin/service ... status, it says "xxx dead but subsys locked." Is the daemon running or not? I assume it's some kind of privilege issue with how the daemon is setup versus the non root login.I would like to have users be able to use service to query daemon status as works with the base daemons like sshd and httpd.
Running CentOS 5 x64 And today my httpd is running very slow and I can't find a fix. Looked all over different forums
When starting httpd I get the message: /var/lock/subsys/httpd': No space left on device I checked that directory above and there is no file called httpd tried rebooting server
Can't do updates too: [root@u15438957 ~]# yum update Loaded plugins: fastestmirror, priorities rpmdb: unable to join the environment
I have opened up the Service Configuration window that shows all the services and their status. My httpd says that it is enabled, but also that "this service is dead" and there is a orangish triangle. I can run phpMyAdmin on my server, but I can't run it from any other PC on my network.
My mail server is getting problem since 3 days. It automatically get hang and httpd service get dead any time. How I can check what is effecting server, load, network traffic etc...
Since I started using Fedora 10 I can't login as root. Even though the system recognizes the root password when it requires it for certain administrative tasks it refuses to let me login as root.
When I try to edit httpd.conf I get the message "could not save file..." it doesn't even prompt me for the root password. My httpd service is dead and I can't resurrect it, what should I do?
I am using CentOS 5.6 with Apache 2.2.17. The Apache was compiled from source using RPM build to comply with PCI requirements. Also Plesk 9.3 is used as a control panel, but other than the config files the Apache is pretty standard. When the httpd is started, there are no errors reported in /var/log/messages or in the error_log, and the httpd starts, shows up in ps and the pid file exists in /var/run/httpd.pid.
However when you check the status 'service httpd status' you get 'httpd dead but subsys locked'. You can add websites normally, and the proper config files are generated so I am pretty sure this isn't a control panel issue as I have other servers running the same control panel and Apache 2.2.16 compiled and installed the same way as the 2.2.17 and there are no problems.
I have windows xp on my dell but I lost the drivers disk so I want to install linux Fedora 13 instead and wipe the windows xp. I burned the iso to a dvd and loaded up the live session user and used "Install to harddrive" but when I get to the partitioning window there is no harddrives to install to so I cant overwrite the windows drive (/C:)..
On a fresh Fedora 13 install, I have done:su yum install vncand:su yum install vnc-serveryum installs tigervnc and tigervnc-server with no errors. However, when I go into /etc/sysconfig/ to edit vncservers, vncservers does not exist. Also, there is no vnc service listed in the services, and doing:sudo service vncserver restartreturns the message:vncserver: unrecognized service
I am using fedora12 and i was wondering whether i could upgrade my fedora12 to fedora13!!i dont want to start installing fedora13 all over again(boot it again from a cd),i want to just upgrade it directly from my fedora12.when you install fedora13 will all the files of fedora12 get replaced with fedora13 or will it just add additional files onto your fedora12?
I installed samba server on fedora13 last week and share some files from samba server GUI i also created samba user and password for shared folders but I can't get access samba share folder from neither fedora machine nor Windows XP When I open samba share from other fedora such as smb://192.168.10.2 I can see share file and when I browse folder, password required box is appeared but after I put samba username and password the Error message is Unable to mount location Failed to mount Windows share even when I browsed samba share from windows xp error message is \192.168.10.2smbshare is not accessible. you might not persioon to use this network resource. Contact the administrator The network path was not found.
I downlod the fedora13 and when i open my pc a message come gnu grub version 0.97 [639k lower /1038848k upper memory).bash -like line editing is supporter.for the first word ,tab lists possible command copletions.anywhere else tab lists the possible comletions of a device/filname.)what is that command i have to give?iredd aboute grub, what grub whants for me?
I have installed fedora 13 in my system. httpd server is also installed. when I tried to start the service of httpd, following error message displayed: Starting httpd: (98)Address already in use: make_sock: could not bind to address [::]:80
accidentally I do something wrong with my server and the httpd folder missing and I need it to setup my mail server and anyone can help me what can I do without reinstalling my Cent OS? Here is the error msg :
[root@mydomain etc]# service httpd stop Stopping httpd: [FAILED] [root@mydomain etc]# service httpd restart
I just installed win 7 and now can't install fedira 13 on the partition that i made for it on the same drive. The problem is that after installation of win 7 i lost the ability to boot form cd. In bios i still have cd set up to boot first and drive second, but win 7 did something that overrides bios set up. I even tried Esc for boot menu, then i select to boot form cd, but it still boots in windows. What can I do to fix this?
I am attempting to put some Virtual Machines on my Fedora13 box. Using KVM it just doesn't want to work quickly.... Using the v.14 LiveCD to try and install an image onto the virtual machine... took over 15 mins to get to a login screen, then I gave up attempting to log in after 5 mins from clicking the login button. I assigned the virtual box to have 1024Mb RAM and access to both CPU.
I then decided to sack it off and try and install VirtualBox... this has been a disaster. I know it's due to the fact that it wont run alongside KVM, and I've disabled KVM (as far as I am aware) - but it's still FAILING on using DKMS (Or whatever it's called - not got the error open at the mo). basically.. am I doing something wrong causing the system to run so ridiculously slowly, and how am I being thick for VirtualBox to fail to install?
I have ALFA awus036h wireless usb card which uses rtl8187 driver. after connecting it to my fedora13(64) machine and adjusting wicd preferences to enable wlan1 , i get the card connected to my wireless network, but actually cant browse any web site( the browser keep saying : looking up www.......), also PINGing return nothing. i tried handling the card using the built-in driver (kernel 2.6.33.6) and the driver shipped with the card, but both gave me the same result.
