General :: No GUI After Updates Startx No Go
Apr 14, 2011
I downloaded the latest up dates and lost my GUI I used STARTX and it loaded the GUI I got a message saying something along the lines of there is a propitiatory driver for you video card would you like to use it
I clicked yes it told me to log out and log back in.I did so and now STARTX doesn't work I have an ATI card.3 questions
1.how do I get it to load the GUI
2.how do I get it to boot straight to the GUI
3.how do I change my root password
View 14 Replies
ADVERTISEMENT
Feb 8, 2011
I'm running RHEL 5 on a dell server. Recently, after some updates were installed, the server hangs when trying to start the gui (its set to run level 5)to get into the login screen. I can boot into run level 3 but get the same issue when I startx. CTRL-ALT-BackSpace doesn't return me to the command prompt. I get a blank screen with two letters and a blinking cursor. Which direction or log files to look at to start the troubleshooting.
View 2 Replies
View Related
Apr 18, 2011
I am using some software that uses CUDA to run some stuff on the GPU.
If I am using ssh to connect to the box, or vnc even, and I try to run the program I get an error that no CUDA device is enabled. I have to go over to the machine and physically log in, and type "startx" to get it to detect the device. It can also be another use on the box using an X session, but one has to be started soemwhere on the box to get CUDA working. Is there a way to "startx" over an SSH session so that this will work and I dont have to go over and log in?
View 3 Replies
View Related
Feb 4, 2010
just installed Slackware 12.2 and everything ran smoothly.Except, when i boot into it, login and try and start x, it doesn't work.
Code:
Fatal server error:
no screens found
[code]...
View 1 Replies
View Related
Jul 19, 2011
How do i download and install updates? It says package not found.
View 4 Replies
View Related
Aug 11, 2011
When I run the command startx it launches me immediately into Gnome without having to login and if I attempt to go back to the command line interface by typing in the comamnd init 3 in the x-terminal it does nothing. If I attempt to hit CTRL-ALT-Backspace it does nothing however if I were to run init 5 it launches me into the Gnome Display Manager and expects me to login and if I run init 3 in the x-terminal it shutdowns the x-server and returns me to the command line interface.
View 3 Replies
View Related
Aug 2, 2010
I use startx to get into my front desktop.
What command should I use to restart my desktop?
View 5 Replies
View Related
Oct 9, 2010
So, I am having difficulty understanding what I need to do or if this can be done at all..
I would like to boot into the command line for my Linux system but, still have access to the different environments as well (KDE, GNOME, Enlightenment, etc) but I don't know how to do that using startx. that seems to only start KDE.
Can you use startx in some way to optionally start another environment? If not, can it be set up to start that graphical umm.. like start chooser screen? I don't know all the terms but its the screen that comes up that you enter your username/password and you can select which environment you like.
View 4 Replies
View Related
Jul 19, 2011
I came along the comment (when you type startx => you won't go to KDM or GDM but directly to your standart desktop= KDE,GNOME,...) at [URL] and would like to know what the difference is if any.
View 2 Replies
View Related
Jun 1, 2010
I left slackware 13 with airodumb and airplay executed in console for 6 hours. When I got back, konsole had something similar to "packet has length error". I could open the packet using aircrack -m option, but when i shut down the OS, it didnt shut down properly. Now when I do startx black window stays forever. I tried pkgtool and change to KDE but the same happens.
View 4 Replies
View Related
Sep 6, 2010
I have being googling and trying to find out solution to unable to startx.Please note i have already search from last 2-3 days for the solution but didn't found anything.So request someone to guide me step by step.Also one more thing, the server was crashed and i upgraded the existing server using CD. But since then we are not able to start startXI hope i can get some help here ,i am a newbie to linux but i am computer engg so i can understand some logics..I am getting below error
Code:
[root@astarcftp /]# startx
xauth: creating new authority file /root/.serverauth.13592
[code]....
View 10 Replies
View Related
Sep 4, 2010
I have installed Damn Small Linux on an old laptop.very boot reports that the SSH has loaded as I have configured it to do so but does not load startx as instructed in .bash_profile.After bootup, the following is reported by the system.-bash: /home/dsl/.bash_profile: line 12: syntax error: unexpected end of fileThis is the content of the .bash_profile
#!/bin/bash
export IRCNICK=DSL
export DISPLAY=:0
[code]....
View 1 Replies
View Related
Aug 24, 2010
I am a newbie to Ubuntu and I am having problem with loading Gnome and startx. I have ubuntu 9.1 installed on my Dell Inspiron E1505 system. The problem started when gnome-power-manager started giving error regarding configuration settings not installed properly. I tried to google it and after lot of searching I figured out that my root directory is almost full. Moving some folders helped me solve the problem. But in the meantime I think I have screwed up some where. Now my Gnome or startx wouldnt load. Ubuntu logins my user profile and after that just sits that with the cursor revolving. When I press ctrl+Alt+F1 it gives no errors. Then I stop gdm by
"sudo service gdm stop" and start startx by "startx" seems like Startx also doesnt start. checking again by Ctrl+Alt+F1 shows that its still running giving message like
setting master
stopping master..
View 7 Replies
View Related
May 28, 2011
I want to put:
xmodmap -e "pointer =3 2 1"
somewhere in the startup. It seems creating an .xsession is the solution. But after I create a .xsession file in my home folder, the next time I run startx the screen just turns black. (And only for a short while can I switch to another virtual terminal, before that too becomes impossible). After deleting the file it runs OK again. I'm not using any login/desktop manager. I use IceWM on Debian Squeeze. Is there some script/import that has to be present in the .xsession file, or is something else going on? Also I'd like to know what I should do when I get a black screen. Turning off the PC is such a crude method
View 11 Replies
View Related
Aug 28, 2011
I am trying to start a VirtualBox VM on a separate X screen (in fullscreen) so I can switch between Linux and Windows XP by doing Ctrl + Alt + F<.
I am basically trying to do something like this:
startx "VBoxManage startvm XP" -- :4
startx "VBoxManage startvm "XP"" -- :4 (is this correct for quotes within quotes??)
I get a "bad command line option "VBoxManage" back from the startx script so obviously I am not understanding the rules for how to write "shell magic".
How can I do this correctly, or perhaps there is a better way of achieving a VirtualBox VM on a separate X screen?
View 1 Replies
View Related
May 25, 2010
Redhat Ent Linux ES Release 2 (Taroon 8)
Kernel 2.4.21-4.ELsmp
startx(1): initialize X session - Linux man page
I thought I'd look into methods of recovering from a lost password for future use, how to change the passwd and shadow should I need to. So I started an X session, vi'd my .swp files then logged off. Perhaps I changed one of these files accidentally, but my intent was just to view them which I did. After starting up my computer the next day and logging in I began an X session - "startx". The session appears to have started, but with a black screen and an active mouse cursor.
View 2 Replies
View Related
Jun 24, 2011
I just installed Red Hat Linux Professional 8.0 in my VMWare, but I do not know how to start X Windows. I have tried to type "startx" on "RUN", but I get error message: Fatal Server error Server already active for display 0. If this server is no longer running, remove tmp/.X0-lock and start again.
View 1 Replies
View Related
Jul 9, 2010
When trying to "startx" the machine goes to a black screen and just sits there. Only a hard reboot allows me to stop it. After SSHing into the machine and typing "startx"
[Code]...
View 9 Replies
View Related
Mar 24, 2011
For some reason Update Manager is not installing updates as of yesterday.I have it set to check daily and notify if updates are available. It has been working without issues for well over a year now.
Update Manager tells me updates are available and presents the list of security, recommended, and other updates. All are selected to update, but when I select Install Updates in Update Manager it returns with a Reading Package Information window overlaid on the main Update Manager window - building dependency tree then reading state information and dumps me back to the main Update Manager window without performing any update actions.
View 2 Replies
View Related
Dec 20, 2010
I just learned that warsow 0.6 is out, and went to see if it was available in the ubuntu software center yet, as opposed to going and downloading and installing it manually from the warsow website. The ubuntu repo's still have version 0.5, and at the bottom of the page it says:
"Updates: Canonical does not provide updates for Warsow. Some updates may be provided by the Ubuntu community."
So if I wanted to 'update' this item in the repo's for the better of the community what would that entail?
View 2 Replies
View Related
Jan 29, 2011
There are some updates in the Update Manager list which I do not install. Among them, some drivers for HP Printers (I don't know why this cropped up; I don't even use printers on my laptop), and gcj updates (I use gcc/g++ but not gcj). I unchecked them the first time I saw them on my UM list. However, for every subsequent batch of new updates, UM retains these updates and I need to uncheck them every time. How can I remove them totally from my UM list?
View 2 Replies
View Related
Feb 9, 2010
updates manager constantly crash i tried gnome in safe mode and it doesn't work so i need some way to update the os untill hopefully one update would fix the update.
View 5 Replies
View Related
Mar 25, 2011
So, it is my understanding that Ubuntu's automatic updates do not install ANY updates that are not "important security updates." For example, it did not upgrade me to Firefox 4 automatically; I had to do it myself (Don't all new browser versions usually contain new security features/patches? Oh well...That is a separate question entirely).
ANYWAY, is there some way to get the latest stable versions of all of my open-source software automatically (or at least all at once, on command), instead of just security updates? It seems silly to have to install new versions for every program manually.
Also, related/side question: Now that I have installed Firefox 4 myself (via apt-get by adding the mozilla-stable PPA), will I stop getting security updates for Firefox through the standard Ubuntu update manager?
Actually, a really thorough explanation of the whole automatic update system (or a link to one) would be great too.
View 2 Replies
View Related
Feb 7, 2009
The little red popup window (packagekit) from the lower right showed yum updates
I did a yum update and no updates!
I tried again this morning and no updates
View 12 Replies
View Related
May 13, 2010
I'm running CentOS 5.4 and noticed that for the past month there haven't been any new updates showing up either on 'yum check-update' or 'yum update' (I'm interested in basic and security updates). Although this may be right, I wonder if there is an online reference where I can check the updates that are released for CentOS (security bulletins) and make sure if there is anything wrong with my update system.
View 11 Replies
View Related
Jun 22, 2010
All open-source fanatics out there like me hate industry and large companies for being on such a high horse all the time. Well, some of us have stooped to their level (towards ubuntu noobs).
View 1 Replies
View Related
Aug 21, 2010
I am using a custom minimal install of Ubuntu 10.04 I built up from scratch using mini.iso. All went well till I decided to add .xinitrc to my home dir and autostart.sh (for openbox) to ~/.config/openbox in order to automatically launch a number of common programs when I load up my desktop using startx. I use alsa for my sound server; I installed alsa-base, alsa-utils and alsa-oss pretty much first thing after installing my new system and sound was working perfectly up until a few hours ago. What gets me is that alsa ought to be loading up as I boot into Linux, I can't see how xinitrc or autostart.sh can even affect it, but it seems switching to using those has caused some sort of issue with it, as I am now without sound. Everything else worked fine witht he change, my desktop is loading just how I want it now, all the rest of my sorftware is working fine as best I can tell, it's just the sound that is now borked. Has anyone else had this issue, I've searched all over with no luck so far. If it helps, I am not using any desktop environments, just openbox with a small handful of hand picked packages, I've been running this system for nearly 2 weeks now without any issues until now, and this one has me stumped.
View 1 Replies
View Related
Mar 15, 2011
I'll use i3-wm, just want to know how can I start it instead of gnome using startx.
By the way, where can I get detailed info on X? I am a little confused, don't really understand what startx really starts, what X is and what does it do, how to config.
View 9 Replies
View Related
Nov 26, 2010
Just installed Fedora 14. My HDD LED is flickering constantly about 7x a second. This only happens after I start X-windows and continues if I log out. Top shows dbus-daemon at 15% CPU. I'm sure this is causing it as it only starts after X-windows.
View 2 Replies
View Related
Sep 13, 2010
i've added a user using
useradd turf passwd turf and so on.. after loggin, i can't startx..
View 5 Replies
View Related
