Ubuntu Multimedia :: Doesn't Accept DVD-RWs?
Aug 12, 2010
there's one major issue left preventing Ubuntu from running flawlessly on my hine.Ubuntu doesn't recognize DVD-RWs once written on. The problem occurred with my old drive (LG GSA-H55N) as well with my new drive (Samsung SH-S222L).I'm using Sony DVD-RW (1x-2x speed)
Ubuntu only recognizes blank DVD-RWsonce written on - no matter whether written by Brasero or Windows 7 - Ubuntu isn't showing any drive in Nautilus nor in Brasero after putting in the DVDtherefore I can't even erase themboth of the drives as well as the DVD-RWs are working perfectly fine on Windows 7 (erasing, writing)I managed to get all other things working by now. My system is close to perfection and this is the only remaining major issue.
View 9 Replies
ADVERTISEMENT
Mar 22, 2011
I have two sound devices, an internal audio device on my motherboard and an external USB devices, which came with my headset. After upgrading to 11.4, the microphone on my headset ceased to work with my softphone. As it turned out, the softphone used the standard input device, which was defined in the Phonon tab in the KDE System Settings. Unfortunately, when I put the USB Device on top of the default input stack, it doesn't stay there. When I apply the changes and leave the Phonon tab or even enable "Show advanced devices " the stack always resets to its initial order. I was unable to find any kind of config file where Phonon saves this settings.
View 4 Replies
View Related
Jul 6, 2010
was just working the other day, now no command, even cd.. wont work...how can I fix this?
View 9 Replies
View Related
Oct 10, 2010
I've read through some threads here but the problem I'm having doesn't seem to be the problem others are having.
I just reinstalled 10.04 today after my last installation messed up after a month.
early when I first installed the terminal and sudo were working perfect but now, this is what I'm getting:
[sudo] password for dimebag:
<password>
Sorry, try again.
[sudo] password for dimebag:
[Code].....
I tried every solution I saw and nothing works. I've been having a heck of a time trying to install things.
View 3 Replies
View Related
Jan 21, 2010
I am not a new user of linux but the last time I used linux was five years ago.
I am having a hard time using less. It dont want to accept commands immediately. I need to press 'Enter' to accept the command.
Like if I press 'q' to quit, it will echo 'q' and dont do anything. I have to press 'Enter' to make it quit. Same with other commands.
I am using Windows PuTTy 0.60 with ssh to connect to linux machine.
The linux system is: Linux <removed> 2.6.18-53.el5 #1 SMP Wed Oct 10 16:34:19 EDT 2007 x86_64 x86_64 x86_64 GNU/Linux
The less version is :
less 394
Copyright (C) 1984-2005 Mark Nudelman
I dont have any problem with vim and more. Only with less.
I have also tried changing the TERM from xterm to vt100. But still the same problem with less.
View 3 Replies
View Related
Mar 17, 2011
[code]...
The variables are clean and available in my script. No prob. $old is an IP-address of a server, $new as well. replacement-file is an xml-file (the ip-address to be changed is within an xml-tag). It should be trivial, but it isn't. I spent the last 3 hours reading about the problem, trying several different 'solutions' or workarounds. It should work, the '"' should take care that the variables get expanded, but whatever I try the old server IP isn't replaced.
View 7 Replies
View Related
Aug 21, 2011
I installed webmin, and I tried to access it with my account (not root, but able to sudo) and I always got login failed.Now I have Access Denied even to my login page for too many tries. What should I do?
View 1 Replies
View Related
Oct 7, 2010
My wifes computor crashed during an update with a message to fill in a report. It would not respond to any key presses. The computor has been running 11.3 since it was realeased without problems other than jerky video. The computor will not boot it asks for the password but does not accept it, Although I can see the Home folder it does not mount. I have tried testdisk but although it sees the partions it cannot acess them.
View 5 Replies
View Related
Apr 19, 2010
I'm building a simple(?) socket server using threads to serve up a few requests. The spec is such that I have to listen to three ports at once, so I decided to use pthread to create three separate threads that would wait for connections, then spawn new threads to handle them.
The problem is that when I do this, for some reason the program never enters the wait loop and instead terminates (All three threads did get created since the messages get printed properly.) It gets to the line which prints "???", but not the line after the accept() call.I don't see an open port when I check for one either so I'm 99% sure they're terminating.Basically I have a main() method which has three calls to pthread_create, which should result in three threads being run that all wait for connections (listenOnPort). After each thread creation I print some info to make sure it's actually being created.
By the way, when I just run listenOnPortwithout threading, the server appears to enter the loop correctly and seems to be waiting for requests. It's only when I run the functions as threads that the problem seems to happen.The source is attached below. Any help will be appreciated. Much of the code is borrowed from a website (I can't post it because I am new here.) You need not worry about the handler_ methods because those are just methods that are run by the threads themselves.
Also--the original source was in C and I changed it to C++. Should I just use C?
server.h Code: /*
* server.h
[code]....
View 1 Replies
View Related
Apr 9, 2010
I was trying to edit a file requiring root permissions, so I used sudo. I typed the root password and it failed. This happened three times, and the process was ended. I then logged in as root (su) and was able to navigate to the file and make changes as root. Am I missing something? How would I edit the sudoers file such that this password would work? Or is there another way to log in to the sudo group to make these changes? How do I set sudo passwords?
View 1 Replies
View Related
Sep 1, 2011
I'm using 'Adobe Flash plug-in 10.3.183.4ubuntu0.11.04.1', installed from the package repos on kubuntu, and since the last update, it has broken all flash functionality in both rekonq and firefox.I have tried removing and reinstalling the package multiple times, both with and without the browsers open. Can anyone suggest a way to restoring functionality?
View 7 Replies
View Related
Oct 12, 2010
Ubuntu insists on using movie player as the default for audio files. I would like to use VLC. VLC doesn't show up on the list as preferred applications for multimedia. I tried using custom with vlc %u but it doesn't work.
View 3 Replies
View Related
Jul 17, 2010
i set my pass on ubuntu 10.4 and it work so good on installing app but suddenly it stopped working i thought i would restart my pc i tried to inter my pass again ubuntu don't accept it although it's surely true
View 7 Replies
View Related
Jan 28, 2011
I am using Meerkat w/ the 2.6.35.24 kernel. I am extremely satisfied w/ the direction of Ubuntu and Canonical and am amazed at the focus and dedication of all involved, including the contributors and moderators here.
But I have a question regarding continually upgrading the distribution kernels while awaiting the next iteration (11.04). Is it advisable to upgrade every kernel when my system seems to run well without them? For instance, each kernel upgrade necessitates that I reinstall the NVIDIA driver, among a couple other minor problems. This is not that big a deal, but I would like to avoid it--it's just an irritation when I reboot to a black screen. But another irritation is continually ignoring the update notices.
View 9 Replies
View Related
Sep 1, 2011
I have this issue on both Ubuntu and Lubuntu 11.04 64-bit on 2 different machines. I have not tested 32-bit.
When I run synaptic or update-manager it presents me with gksu, not gksudo as it previously did in previous Ubuntu releases, no matter how many times I try it will not accept my password.
I have even given it command line arguments to print the password to the terminal and it's correct.
I have found a workaround - by running gksu-properties and changing the mode from su to sudo it will now display gksudo and accept my password.
However, I want to know why it won't accept my sudo password for the su and gksu commands? There are no error messages which are outputted, the gui just says incorrect password.
View 9 Replies
View Related
Jan 30, 2010
I've been trying to install java, but whenever I get to the license agreement I can't select "Ok" stating I agree to the license.
View 3 Replies
View Related
May 3, 2010
I am trying to share shared folder via email
myemail@yahoo.com to myemail@hotmail.com
When I click the link and accept button. I get this error:
Something has gone wrong (500)
We've recorded this problem and it will get investigated with the logs. If this problem is urgent, please file a bug report and include this number: OOPS-ID-1585appserver20308. For more general information on Ubuntu One subscribe to our mailing list, check our blog or follow Ubuntu One on twitter and identi.ca to get updates.
If I share a folder via email to abc@yahoo.com is it mean only share to abc@yahoo.com OR every ubuntu one user can access it if they have the link? Let user type in sharing title and message that appear in the email. This is because standard message and title always make people think that is spam virus and they ignore.
Website login problem:
Everytime I login at login.ubuntu. it doesn't automatic link me back to my storage and i have to type change login.ubuntu to one.ubuntu and click sign-in to login.
View 2 Replies
View Related
May 14, 2010
After I installed Lucid on my Netbook, I have different problems with ekiga.
First of all, some information about my ekiga account:
In ekiga I created a SIP-Account with a usual landline phone-number, my voip-provider is 1&1 (in Germany). In ekiga the account is named "Standard%limit", because I cannot register my sip-account without the "%limit". If I leave the "%limit" out, I get the message "Could not register (Forbidden)", but here on ubuntuforums (or maybe on launchpad) I read about the "%limit" as a workaround. Maybe it has something to do with my problem, I don't know.
Now, this is my problem:
Ekiga does not accept incoming phone calls after a few minutes after launching ekiga. Well, let me describe it this way: Usually ekiga plays a ringtone and shows a message whenever there is an incoming call. However, ekiga only behaves as described and expected just after launching ekiga. A few minutes later, lets say five or ten minutes, ekiga does not accept incoming calls anymore. I tested it with my mobile phone - when I call myself on the landline with my mobile phone, I expect ekiga to play the ringtone and show a message that there is an incoming call. However, ekiga does not do anything and after a few seconds the call is terminated automatically. But it is not the same as if ekiga is not running because if ekiga is not running I get the message that the subscriber is not available.
View 1 Replies
View Related
Jun 12, 2010
this is just weird. Did a fresh install from the alternate CD, including deleting original Win XP partition. Installation went just fine. Building this for my wife, so when asked for user name and password, entered those for her. As required, enteressword, then re-entered for verification. When setup completed, I tried to login, but absolutely could not. System recognizes the keyboard, responds to enter key, enters dots in the PW box as I'm typing but only returns Authentication Failed.
Thinking I must have mistyped the PW both times, I reinstalled. This time, I created my user name and password; the one my hand muscles know so I don't even have to think about it. Get to the end, reboot and, I can't log in!Does anybody have any idea what's going on here? I'd truly love to find out; my wife is getting restless
View 5 Replies
View Related
Jun 15, 2010
I just reinstalled ubuntu lucid after accidentally damaging it, And I used all the same passwords and user names as before, I can login fine, and I can do sudo commands, but the gnome keyring wont accept my password, I tried changing my password using Applications>accessories>Passwords and encryption but that didn't work. How can I fix this so that keyring will accept my password, I need it to save my wireless router password.
View 1 Replies
View Related
Jul 13, 2010
I'm having problems getting openssh server to accept connections in Ubuntu 10.04.Here's what I've done (twice): Installed Ubuntu 10.04 on USB drive with pendrive installer. This creates a default user "ubuntu" and you don't get the chance to choose a password for it. Started a keyring for network access and selected password. Works.Enabled VNC and selected password. Works fine with VNC client on local network. Logs in as "ubuntu" user and asks for the VNC password, then connects. Note: the client doesn't know the "ubuntu" user password, and neither do I! However, it works.Installed openssh client and server from Ubuntu s/w center.
$ ssh localhost OR $ ssh ubuntu@localhost try to connect, but asks for password, which I don't know (see step one, above) so, then I created a new user, with known password, logged in as new user in Ubuntu, works.however, $ ssh newuser@localhost still fails, even when correct password for <newuser> is supplied. Rejects the password three times, then gets the usual error about keys.I also tried connecting with an SSH terminal app from my iPad, again using <newuser>. It gets essentially the same error, "failure to authenticate".
All this is still on my own LAN, haven't gotten to going outside the router yet.What I want to do in the end is use VNC over SSH from a client on my iPad to talk securely to Ubuntu while I'm traveling.
View 9 Replies
View Related
Aug 14, 2010
For some reason, several irksome changes have occurred. The worst is that it won't let me log in. It will not accept my password.? I was told that if I downloaded Ubuntu, I could use that to get to control panel and fix the problem. After 4.5 hours on another pc, I had the download and the cd does boot Ubuntu. What is my next step I have no working knowledge of Ubuntu.
View 5 Replies
View Related
Nov 29, 2010
I recently did a clean install of Maverick Meerkat and copied a few configuration files from my old system. I can log on normally, and the system works just fine. However, when I lock the workstation with any method, the system will not accept my password. I'm certain that I'm typing it correctly (I tried over 20 times) and that the capslock is not on. When I reboot, I can log in again just fine. In other words, my password only works at initial login, not when unlocking the workstation.
View 4 Replies
View Related
Dec 20, 2010
I have an Ubuntu 10.10 box authenticating Users against an LDAP server. User authentication works fine - ssh, console or Gnome.
The only place it has an issue is when the gnome-screensaver is activated and locks the computer. When I try to enter the correct password at this point I get these error in the logs;
Dec 20 14:42:23 box-ubuntu unix_chkpwd[12240]: password check failed for user (myname)
Dec 20 14:42:23 box-ubuntu gnome-screensaver-dialog: pam_unix(gnome-screensaver:auth): authentication failure; logname= uid=10038 euid=10038 tty=:0.0 r
user= rhost= user=myname
Dec 20 14:42:23 box-ubuntu gnome-screensaver-dialog: pam_ldap(gnome-screensaver:auth): Authentication failure; user=myname
[Code]....
View 1 Replies
View Related
Jan 26, 2011
When I try to switch to another user, the login screen show the user selection list, but I can't enter anything - when I click on a user name, the computer just beeps. I have to reboot to get out of this.
View 4 Replies
View Related
Apr 3, 2011
After not using Ubuntu for a couple of weeks - suddenly it will no longer accept my username or password- it does not say which one it doesn't like - been using the same ones for 3 years.How can I get in to reset ?It is on a multiboot PC... Ubuntu/WinXP Pro/Win XP home
MTIA
View 2 Replies
View Related
Jun 11, 2011
I seem to have a working install of Ubuntu Server 11.04 (Samba running without issue on same machine). The lamp stack seems to be running fine as well. (Apache index.html page works, phpinfo() works, mysql works from the mysql command line.) I have installed phpmyadmin. After install I had to reboot the server (restarting Apache still said error in PHP and couldn't start). After reboot, the welcome screen comes up, but using root with password doesn't work. Using an admin user that I created with privileges in *.* doesn't work either. There are no errors on the screen, it just simply loops back to the beginning screen.
There is an error in apache2 error.log saying that it can't find the page [URL] which seems strange because you can bring up the welcome page, you just can't log into phpmyadmin with any of the created users that I made from the mysql commandline. I don't see any php errors in syslog (which is where the php errors are being directed) except a notice that CRON is running for some purpose for PHP.
View 6 Replies
View Related
Apr 7, 2010
I'm using 9.10 most recent updates. I want to connect to a wireless network and get a dialog box offering "WPA & WPA2 personal" as the only choice. The passphrase I was given is 6 letters but the "Connect" button does not light up until I get to 8 when entering wpa/wpa2.
Do I need to convert the passphrase somehow?
Atheros 9k and Linksys "Wirelss G router with SRX200".
View 2 Replies
View Related
Jul 1, 2010
I set up my Postfix/Dovecot Sasl implementation according to the Server Docs. Now it worked both for SSL POP3 and sending via SSL SMTP. But recently it simply stopped accepting my mail, I can't send out.
View 9 Replies
View Related
Jul 4, 2010
I am using LuckyBackup to back up my laptop disk to a USB disk. I would like to display to the user the message "Please mount backup disk" and have the user click "OK". LuckyBackup has a feature to allow issuing commands before it does the backup. I have been investigating scripts (I have never written one.), but do not understand how to use them to this end.
View 4 Replies
View Related
