General :: "libgcrypt.so Not Found" Error At Boot
Jul 20, 2011
I'm running an ubuntu based OS on an encrypted external hdd drive and recently ran "apt-get autoremove" which has damaged my ability to boot the drive.
The kernel boots to the passphrase login point but then gives an error that reads something like "error loading shared library - /sbin/cryptsetup/libgcrypt.so.11 file/directory does not exist". It does let me enter the passphrase but gives an error when I submit it - "crypsetup failed: options or bad password"
So I've mounted the drive in my normal ubuntu 11.04 environment and copied the libgcrypt.so.11 from "/lib/i386-linux-gnu/libgcrypt.so.11" to:
/media/"boot partition volume identifier"/tmp/sbin
/media/"bpvi"/tmp/lib
/media/"bpvi"/tmp/lib/cryptsetup
/media/"bpvi"/tmp/usr/lib
the same error still occurs.
View 1 Replies
ADVERTISEMENT
May 21, 2011
Ubuntu 9.10 was set up to handle the booting selection - previously I thought it was xp but Ubuntu 9.10 "did" it. The system started out as a xp / ubuntu 9.10 dual boot on a 400gb drive. xp has 210gb, ub has 80 and their is a 100gb shared storage. Xp was installed first and then I followed a guide over at linuxconfig.org to get ub installed so that I could select which OS was wanted at boot. Ubuntu manages the boot up menu (Went back to look at my notes from the original setup) The owner tried to update to ub 11.04 and afterall was said and done the machine now boots to the message
error file not found grub rescue I can't say if 11.04 was properly installed or not. Ask whatever you like and I'll give the best answer I can. I think the xp install is okay but I can't say for certain as I don't know how to boot it outside the bootmanager at startup. Data has been saved so if I have to blow it all away and start over I can but I'm hoping I won't have to.
View 29 Replies
View Related
Feb 17, 2011
I recently installed 11.3 on an external drive. After adding some software in yast (searched Kernel and checked every option), I was prompted to reboot but the no boot sector found error came up. Tried reinstalling with the same result. Grub is boot loader
View 8 Replies
View Related
Jan 1, 2011
I have this old box that I used at school that I wanted to re-purpose and use. So i decided to that I wanted to run xp, ubuntu studio and slackware so I can learn about linux and do some other things with xp. I think I got through the installatiosa all fine and dandy, and I installed grub for my boot loader, I can boot into studio and xp, but I cant get into slackware. the grub boot menu is sorta funky too, it shows a generic and recovery mode for studio which is fine, and then another option for xp, some memory test boot option, but then for slackware it shows "Slackware Linux (Slackware 13.1.0) (on /dev/sda4) four times in a row. If I select any of them they all end up with some error; the third SW [slackware] option down the list of the repeated 4 allows me to sign into root, but when I type "startx" i get :
(EE) intel(0): No kernel modesetting driver detected
(EE) Screen(s) found, but none have a usable configuration
Fatal server error: no screens found
but thats with a lot of other text above that. if you need any more details, please dont hesitate to request for them. I'm going to take some time and cool down. I'm trying to get these three OSes running from one HD. I've partitioned the 80 gig drive as follows
Primary 40 G NTSF for XP
Primary 2G Linux Swap
Primary 16G Slackware
Primary 18 U Studio
Primary
View 21 Replies
View Related
Jan 16, 2011
I am using ubuntu 8.04 with dell inspiron mini. Since couple of days, I got following error
error 15: file not found
Press any key to continue
After than
it appears
Ubuntu 8.04.2 kernel 2.6.24-27-lpia
Ubuntu 8.04.2, kernel 2.6.24-27-lpia ( recovery mode )
Ubuntu 8.04.2, kernel 2.6.24-24-lpia
Ubuntu 8.04.2, kernel 2.6.24-24-lpia ( recovery mode )
Ubuntu 8.04.2, kernel 2.6.24-22-lpia
Ubuntu 8.04.2, kernel 2.6.24-22-lpia ( recovery mode )
System Restore
Use the Up and Down keys to select which entry is highlighted press enter to boot selected OS, "e" to edit the commands before booting, or c for command line.
Before it was not like this. How can I fix it for smooth running.
View 8 Replies
View Related
Apr 30, 2010
After upgrading to 10.04 from 9.10 Win7 wouldn't startup any more. So I tried this HowTo: [URL] to restore Grub2. But now each time I boot up I get this two lines: error file not found grub rescue> I have NO idea what to do.
[Code]...
View 9 Replies
View Related
Oct 27, 2009
I am getting a message at my first re-boot after install of "Error 15: File Not Found", and that's as far as it goes. I just installed Fedora 11 on a Drive that I had recently ran Ubuntu 9.04. I did re-partition and format the drive. I am also running Win XP Pro on another drive, and can boot from either. The computer is older, but all the hardware seemed to work fine with Ubuntu and altough I had to format the install drive a couple times the installation seemed to go ok.
View 4 Replies
View Related
Apr 23, 2010
I am trying to install from the iso image that a burned to cd, but while loading it comes up with an error. Eventually it says no repository found. I am not sure why this is happening.
View 5 Replies
View Related
Sep 18, 2010
I have updated opensuse 11.3 via yast and after reboot I got this errorerror: file not found.error: you need to load kernel first.Press any Key to continue.
View 9 Replies
View Related
Jun 19, 2010
I have a problem with my Ubuntu 9.10. I found on some help forum on how to clean up the boot menu some of the options for previous updates.So I went to terminal, typed gksu gedit /boot/grub/menu.lst
View 3 Replies
View Related
Mar 26, 2011
I have an HP Pavilion DV 6500 laptop running Windows 7 and Ubuntu (via Wubi). I just updated Ubuntu to 10.10 from 10.04. After restoring the Windows bootloader (which I need to do every time Grub gets updated), I can no longer boot up Ubuntu. When I select it from the bootloader, it gives me a couple of errors, the final one being: Error: File not found And then reboots the system automatically.
View 1 Replies
View Related
May 7, 2011
I did an upgrade and now getting grub error 15 file not found on boot, memtest runs ok. any help would be appreciated. system information is listed below:
Find /grub/stage1
hd(1,0)
Menu.lst
[code]....
View 7 Replies
View Related
May 12, 2011
Downloaded and installed [URL], copying it to the boot directory under grub. Everything went fine until after my initial reboot and selection of the FAILSAFE option just to check that that was OK. Went well until shutting down, when hung just after closing all files and putting finishing touches to sending kill signal to all processes, when it hung and had to touch power button briefly to complete shutdown; no big deal. When rebooted and this time selected "Plop Boot Manager Install" (repeatedly), got this message: Booting "Plop Boot Manager Install" root (hd0,1) Filesystem type is reiserfs, partition type 0x83 kernel [URL] root=/dev/disk/by-id/scsi-SATA_TOSHIBA_MK4025G_65M21717A-part2 vga=0x314 resume=/dev/sda1 splash=silent showopts Error 15: File not found Press any key to continue
Then had to use FAILSAFE to reaccess OS. What I did in menu.lst: from title openSUSE 10.3 etc. changed to title Plop Boot Manager Install from root (hd0,1) kept it the same from kernel /boot/vmlinux-2.6.22.18-0.2-default changed to kernel [URL] (did not include the word default) Should I have made the root as (hd0,0)? Should I have added the -default to the [URL]? Any other understandings as to why this didn't work and got that error message?
View 4 Replies
View Related
Jan 20, 2011
When I boot my computer (emachines E528 laptop), it gets to the BIOS loading screen (the one where you have the option to press a function key to get to the BIOS settings), then it goes to a black screen and looks like it is going to load GRUB, but instead of loading GRUB, the computer reboots. It does this endlessly, unless I insert a LiveCD. So, it's not the BIOS. That's good. When the Mint GUI (Linux Mint was the LiveCD I was originally using as I just happened to have it on hand) loaded for the first time, I checked all of the hard drive partitions and they all seemed to load fine. So, it's not a mechanical problem with the HDD. That's good.
At this point, I figured the MBR had become corrupted somehow. Now I wasn't really sure exactly where the MBR was, or how it all worked, but I was pretty sure that if I just reinstalled GRUB, everything would be hunky dorey. Unfortunately, I hit a road block when trying to install GRUB. That's not good. I am trying to follow the instructions in this thread, but I get the following error:
Code:
grub> find /boot/grub/stage1
Error 15: File not found
So then I tried following the instructions here, but I don't know how to tell which drive is sda1, sda2, etc. I'm guessing there's some terminal command to figure it out, but I don't know it and Google was less than helpful. I feel like something that basic should be easy to find, but I digress.i am getting very close to backing up everything and reinstalling everything. Only problem with that is that I am not sure how to access the files on my Ubuntu partition as they are encrypted (I wrote down the key when I started it up, I just don't know how to bring up a prompt that will let me enter the key). I really don't want to reinstall and set everything back up, but if I have to I will. how to tell which partition is associated with which sda#, or how to access the files in my encrypted Ubuntu home folder. How do I tell which partition is associated to which sda#? How do I open my encrypted home folder from my Ubuntu partition?
View 9 Replies
View Related
Jul 4, 2011
I've setup raid to my primary partition by starting up from an USB. Array was up&working. Now starting up from my HDD's, I get: error: file not found. grub rescue> what should I do here?
View 1 Replies
View Related
Apr 5, 2010
I had a windows 7 professional on my computer. I tried dual booting it with ubuntu. While installing ubuntu when it asks which partition you want to install it "as it said your all data in the partition would be erased but not before you confirm" so I selected go back and aborted installation because I didn't wanted that and bang I start my system again an I get this error "no boot device found". I ran my hard disk test it say's passed so I don't think my hard disk is corrupted. I tried using windows 7 recovery disc but I guess it doesn't even detects a operating system on my laptop. I got no back up of my data. Any way to get back my data if I cant get windows back!
View 8 Replies
View Related
Aug 11, 2010
I am having a problem installing SLES11 on a new server. It goes fine through the setup until it gets to GRUB, it gets me the following error message: Error occurred while installing GRUB
[code]...
I cant continue the installation without this
View 5 Replies
View Related
May 3, 2010
Just did an upgrade from 9.10 to 10.04 through the update manager and now I can't boot into the OS. I receive these two errors:
error: no suitable mode found.
error: unknown command 'terminal'.
After these two errors. Screen flashes with the red/white loading circles and Ubuntu logo. After that just goes into a black screen.
View 9 Replies
View Related
Jul 3, 2010
I have a Wubi 10.04 installation and I just did an upgrade and then I rebooted and then I got a message which just said 'error: file not found'. Then it doesn't do anything after that. I get no grub prompt or anything. I'm a newbie to Ubuntu so I'm not sure what to do.Is there a way I can repair the installation from windows maybe or what can I do because I can't even enter the command prompt.
View 2 Replies
View Related
Nov 16, 2010
Decided I'd like to take a look at OpenSUSE and installed onto my desktop. Already successfully dual booting Ubuntu 10.10 and Windows XP (which I keep purely for iTunes). When I start the PC the Ubuntu grub menu showing Ubuntu and Windows options has been replaced by a Suse-branded screen showing something that looks (to my untrained eye) like a grub menu. Ubuntu and Suse are listed. If I select Ubuntu I am shown a dos screen with "Error 15: file not found". I am then taken to the old Ubuntu grub screen but trying to boot Ubuntu from that menu returns the same error. I know all the data is still there - I can mount the drive in Suse and view all my documents.
I have searched the forums and tried to follow some of the instructions given in response to similar threads but I'm afraid I didn't get very far. Please assume that I have NO PRIOR KNOWLEDGE of Linux! I really know nothing about it and am only just getting to grips with basic terminal commands. Goodness knows why I thought OpenSUSE would be a good idea... I found instructions for running Boot Info Script and these are the results:
[Code].....
View 1 Replies
View Related
Jan 9, 2011
I have a Windows Vista-Ubuntu 11.04 dual-boot. However, I have lost the ability to boot Windows Vista. I can select Windows in the GRUB menu, but GRUB says
Quote:
error: symbol not found: 'grub_err_printed_errors'
I have repeatedly searched Google for any help, but have found nothing that applies to my situation. I need Windows because I have an iPod Touch with a tethered jailbreak and can't use it right now.
View 8 Replies
View Related
Apr 29, 2011
after upgrading 10.10 to Natty 11.04 my Kubuntu 64-bit System won't boot anymore. During upgrade an error message appears, saying GRUB2 cannot be installed into a partition (something about bad idea and blocklist). First reboot shows this error message:
Code:
Error: symbol not found: 'grub_env_export'
I tried to repair GRUB2 by using a Live CD, mounting all needed partitions, chroot to my installed system and running update-grub2. This time no error message appears. Next reboot the system does hang, showing "Booting..." for minutes. Nothing happens.I'm using a partition boot loader (for Linux) since years on my Netbook / Notebook. Due to security reasons all partitions of the mobile device were encrypted. Unfortunately I also need an Windows system, so the first partition contains an Win 7 installation encrypted with Truecrypt.
Truecrypt needs to be installed into the MBR (as far as I do know and from my first tests some times ago). So I installed the Linux bootloader into the /boot partition (sda6).
Linux root partition is also encrypted using cryptsetup/Luks.How can I fix this problem, keep my Truecrypt/Windows system and boot the encrypted Linux system?
View 3 Replies
View Related
Oct 12, 2010
I am unable to get a knoppix poor mans install to boot using grub and opensuse 11.3. I have tried the same method on another box, same opensuse 11.3 and it boots fine. However, no matter what partition I put the knoppix files in on the problem box, it is the same error. I also have several opensuse kernels listed in the grub menu that were added when the kernel was updated, so the knoppix grub entry is off the screen. I have to down arrow to list the knoppix entry. I read that with this kind of error using ubunto as the host system, that running update-grub will force grub to look for bootable kernels and add it to the menu of boot choices. Does the same fix apply to opensuse 11.3? I have two versions of puppy linux working on this box as a poor mans install, so I am at a loss why it will not see the knoppix kernel. Can it be a problem of too many kernels listed in the menu.lst file? This box is a live update from opensuse 11.0.
View 13 Replies
View Related
May 7, 2010
I have a Feadora 12 Live CD. It booted up fine on my 700 Mhz computer. I've since then put a new HDD in with which I intended to install Fedora on. But now i get this message
Quote:
No root device found. Boot has failed, sleeping forever
What does this mean? How do get the Live CD to boot?
View 1 Replies
View Related
Oct 22, 2010
Recently I've installed Open Suse 11.3 along with Ubuntu 9.10 on my PC ( made it a dual-boot OS ). This morning while logged in, in Open Suse 11.3, found out that there were important update for kernel in Yast. So, did the update and then required to restart the PC. In the Grub/boot menu, I chose to log-in to Open Suse 11.3, but after a while it returned with " Error 15, file not found ". Luckily I was able to log-in in Ubuntu 9.10. Assumed that Error 15 is always related to misplaced or wrong configuration of Grub in the partition, I did several searching via Google, and found this possible solution HowTo Boot into openSUSE when it won't Boot from the Grub Code on the Hard Drive . So I tried the " Broken Grub menu: boot to the menu, drop to a console and boot openSUSE direct " method. But rightly after the " find /boot/grub/menu.lst " command as instructed in the solution, it returned with ( hd0,0 ) and ( hd0,4 ). Why there are 2 bootloader in the Grub ? Which bootloader should I choose ? And for convenience, here is my " menu.lst " folder that I get via Terminal in Ubuntu 9.10 :
$ cat /boot/grub/menu.lst
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
[code]....
View 9 Replies
View Related
Apr 23, 2010
What i want to do is make a list for the current directory, then checking if it already exists if so ask the user if he wan'ts to overwrite, if no go back, if yes, overwrite the file. At last if the file doesn't exist i want to create it and fill it up with the list from the directory. This is how i failed
if [ -e dirdump.dmp ]; then
echo " The file already exists , overwrite? y/n "
read input
if [$input == "n"]; then
break
[Code].....
I get the following error: script.sh: 15 [y: not found
This is when i choose to type y.
View 6 Replies
View Related
Feb 17, 2011
i have written a simple program in gtk. #include<gtk/gtk.h> //header file main program.. on compiling it is showing fatal error:32 /usr/include/gtk/gtk.h is not found. i have checked the location but file is there.
View 2 Replies
View Related
Jul 18, 2011
While following this guide https://help.ubuntu.com/community/Wi...Driver/bcm43xx to get my wireless to work, I get anerror that says that the directory does not exist.The command is tar xfvj broadcom-wl-4.150.10.5.tar.bz2hird post has a screenshot as an attachment. The tar file is on my Desktop.
View 14 Replies
View Related
Mar 25, 2011
I am tying install part image but ı receiving an error message like this:
#./configure
configure: error: SSL Headers not found.
i am using ubuntu 9.10 64bit
View 4 Replies
View Related
Jun 25, 2010
friends <
I tried installing amanda like this:
yum -y install amanda*
Gathering header information file(s) from server(s)
Server: Fedora Linux / stable for Red Hat Linux 3ES (i386)
[code].....
I tried yum because when i did the simple download o the newest amanda rpm and tried t install.. i get the following dependency problem..
[root@Mixer amanda-dwnload]# rpm -ivh amanda-backup_server-3.1.0-2.rhel4.i386.rpm
error: Failed dependencies:
libcurl.so.3 is needed by amanda-backup_server-3.1.0-2.rhel4
libidn.so.11 is needed by amanda-backup_server-3.1.0-2.rhel4
tar >= 1.14 is needed by amanda-backup_server-3.1.0-2.rhel4
I do have yum installed -- that s when i do
yum --version
2.0.3
i see a vers num.it is a redhat system
uname -a
Linux Mixer 2.4.21-58.EL #1 Tue Nov 4 11:55:15 EST 2008 i686 i686 i386 GNU/Linux
---
cat /etc/issue
Red Hat Enterprise Linux ES release 3 (Taroon Update 9)
[code].....
View 10 Replies
View Related
