I have a problem about installing DHCPv6 on CentOS . I have 2 machines,a machine is DHCPv6 server and another is DHCPv6 client,they are in the same network.I configure 2 machines as the following link :[URL]
But,the client machine doesn't get a ipv6 from server.
I have tried to install debian 5.0 and 4.0 without any luck. I have both tried virt-manager and virt-install with both debian-501-i386-netinst.iso, and full dvd. I't always gives me the same error:Starting install.Could not find an installable distribution at '/xen/debian-501-i386-netinst.iso'
I've been trying for the past week to install an icecast server on my centos 5 VPS hosted through phurix.
I've tried compiling it, installing it from RPM. but im getting nowhere. Has anybody had any luck installing it, who wouldn't mind explaining how they went about it?
I've searched google for hours on end and all I can come up with is generic cent os 4 guides that just wont work. Im not the best when in comes to linux. I do a great job of copying and pasting to a shell prompt and can use ftp etc.
if this is any use.. heres the last output from my last attempt and compiling it...
[root@vps613 icecast-2.3.2]# ./configure --prefix=/usr/local/icecast checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... no
I have an i5 Thinkpad running Windows 7 64-bit. VT is enabled in the BIOS. I have installed vmware server v 2.0.2 but am unable to install Centos 5.5 x86_64 as a guest OS. The steps that I followed are as follows:1. Created a new VM, specifying RHEL 5 64-bit as the intended guest OS (per vmware documentation - Centos is not available as a selection2. Downloaded all 8 iso files for Centos v5.5 64-bit3. Modified the CD/DVD drive to 'connect at power' and use an iso with the path pointing to the x86_64 iso 1 of 8When I power up the VM, the console window displays 'ISOLINUX 3.11 2005-09-02 Copyright (C) 1994-2005 H. Peter Anvin' and nothing else. The installation splash screen never appears. As a test, I downloaded the first of 7 iso files for the 32-bit version of Centos 5.5 and pointed the CD/DVD drive to that iso. In that case, the installation starts as expected. I would really like to get the 64-bit version installed and running.
What i want to be able to do is create a custom kickstart for my centOS 5 server. I want to create a bootable cd that I can pop in my server and basically walk away for 45 minutes and I come back and its fully installed. All the directions I have read so far tell me that I have to create a seperate ks.cfg and then I need my original centos cd to get it booted. Then the cd will ask for where the ks.cfg file is and I have to type the location. I just want to pop the CD in and type in linux_clean or something and have it perform a custom install based on the information and specification in my ks.cfg. How can I go about doing this?
somebody please tell me whether it would be all right to install xp inside CentOS using VMware or it's better to do vice versa if it is ok to install xp inside centos then at the beginning when i install centos should i allocate all hard disk to this OS and later give some to xp , or initially i should keep some space for xp and install centos in the rest ?
I would like to replace default OpenSSH version 4.3 with latest one (5.x). New version do support SFTP chroot, which is something I need.Of course, it can be compiled from source, but it is worst possible option for maintenance, since I do have few servers. Does someone provide RPMs or source RPMs at least ? If yes, what is repository/URL ?
I've got a new server machine: Fujitsu-Siemens PRIMERGY TX150 S6. I've tired to install CentOS 4.4 linux from DVD. This DVD is OK, because I installed from it a couple of days ago. Installation process starts but after some steps it gives me something like this code...
Does anybody have any documentation or can assist with any sort of steps on how to install a SSO server on Centos 5.4.We have just over 150 Centos servers country wide and we would like to implement an SSO server to manage the users and their login credentials locally and centrally.
I'm trying to setup local LAMP installation of CentOS 5.6 in VMware for local developing. I installed Apache, PHP, phpMyAdmin from this tutorial. Is there any other begginers step-by-step tutorial for setting up LAMP? I need help setting up FTP and permissions, hot to setup permissions for /var/www/html directory?
I need to install vlc-nox on a server but it's not in the repos. How would I go about installing this piece of software? I've already been linked to many different sites but neither seem to be working for me.I've also tried [URL]
I have downloaded the package into its own directory /etc/X11 with: wget [URL] How do I run that "make" command while the "makefile" in the directory is called Makefile.in? How do I install this Xorg-Server-1.7.1? Apparently you need this to run Gnome desktop
I am trying to install CentOS 5.4 64-bit on a server with two NICs, one of which allows for iSCSI boot. I want the NIC that allows for iSCSI boot to connect to the iSCSI target on my 169.254 subnet. I want the other NIC to be connected to my 192.168.1 subnet so that it can reach the Internet for the CentOS Network Install.
Anaconda only configures one NIC, leaving me with an iSCSI target and no Internet or with Internet and no iSCSI target. Is it possible to configure both NICs in Anaconda?
I recently purchased an IBM 345 server and tried to install CentOs 5 from a set of CDs that I made. I know the install CDs are fine because I used them to install on another server I own. The install program boots from CD 1, When I put CD 2 in, it asks if I would like to verify the install CD and when I hit skip the install program switches to a blue screen with the key board shortcuts on the bottom and nothing else. It hangs here. If I hit CTRL ALT DEL it will go through the reboot process. My server has 6 36 gig drives in it connected to an IBM server raid 5i. I have drives 0 and 1 set as a volume (raid 1), and the other 4 drives set as a volume (Raid 5). While the machine hangs the light on drive 4 comes on and stays lit.I was successful in installing Windows Server 2003 on the machine, so I am sure the hardware is ok.
I have recently tried to install RealVNC onto the CentOS 5.3 VPS that I own. Unlucky for me, this happened to be a big fail. I got this error produced in the errorlog from RealVNC:
Code: Xvnc Free Edition 4.1.2 Copyright (C) 2002-2005 RealVNC Ltd. See http://www.realvnc.com for information on VNC. Underlying X server release 70101000, The X.Org Foundation
yum groupinstall "GNOME Desktop Environment" which did work out for me. Before I have ran the install, the entire VPS got updated by the yum update command. How do I resolve this error so that the VNC will work as I would like to install a few applications on there that need to be controlled through a mouspointer.
So I just got a new centOS box with PHP 5.1.something but I wanted it on PHP 5.2, initialy running
Code: yum update php returned Code: php-pecl-memcache-2.2.6-1.el5.x86_64 from installed has depsolving problems --> Missing Dependency: php-zend-abi = 20050922 is needed by package php-pecl-memcache-2.2.6-1.el5.x86_64 (installed)
I am trying to install libpcap version 1 on my centos 5.5 (which supply libpcap 0.9.4 as built in). I need libpcap>=1.0 to install snort 2.9. I tried to install by downloading source code from tcpdump.org but failed to update libpcap-0.9.4 by libpcap-1.0.0.
i want to install and configure vpn server on centos 5.5 final i want to work it like that my server is in other city or country, i want to connect it in other city or country and want to use remote server internet on my computer.
I would like to install CentOS 5 to a NFS root. My NFS server is not CentOS. Is there a way to tell Anaconda to use NFS for root? Is there a way to mount some NFS space at /mnt/sysimage and get Anaconda to use it? I supposed it should be possible to either move an already installed CentOS system to NFS and rebuild initrd with a rescue boot or it might be possible to do a manual install using rpm directly to install the packages onto some NFS space. The first would require a local disk temporarily. The latter would be an excessive bunch of tedious work.
I installed BIND 9.7.3 from source on Centos 5.5, and chrooted it, and I'm getting an error when I run 'service named status' I get a reply, but at the end it says 'named dead but pid file exists'
Here's the entire output:
[root@ns etc]# service named status version: 9.7.3 number of zones: 23 debug level: 0 xfers running: 0 xfers deferred: 0 soa queries in progress: 0 query logging is OFF recursive clients: 0/0/1000 tcp clients: 0/100 server is up and running named dead but pid file exists Nothing is logged in /var/log/messages. Named is running and responding correctly. How can I get rid of this error?