I have collected the sa* and sar* files for the past two weeks , i need to generate the report for these files how can i do so i am using centos 5.5. assist me with a tool or a command to do the same.
View 6 RepliesI have an existing Nagios installation from before I started working here. It seems to be working well but my boss has just asked for a report of what servers and the associated processes/functions are being monitored. Is there any way to generate this report other than going through all the Nagios configuration files and putting it together manually?
View 3 Replies View RelatedI just installed awstats and I can't get it to generate any report? I used the default Fedora 12 install.Here is the config file:
Code:
LogFile="/var/log/httpd/access_log"
LogType=W
LogFormat=1
LogSeparator=" "
SiteDomain="dev-server.net"
[Code]...
I am getting an error when i generat a report with squid's report generator ( sarg )is there a tool or way that i can find where in the log file the error is, the log file is 61442 lines, and it's gonna take me forever to find the error,
View 1 Replies View Relatedparsing xml file using shell script and generate report in a PDF file
Xml file input:
<report>
<student name="x" father name="x1" class="first" Address="xyz">
<property name="sports" value="yes"/>
<property name="drawing" value="no"/>
[code]....
I want to generate a temporary random list from a directory of files and then determine the size of an arbitrary block of files from this list (say 1-25 or 26-50) and add their names to a file along with some other info for each name. I can generate a random list with file sizes like this: ls -l | sort -R | cut -d " " -f 6 but i'm not sure how to add up the sizes of just a certain block of these files and at the same time save the file names.
View 2 Replies View RelatedI was trying to figure out how to generate compressed files in zip format and searched on here. The search produced a list of forum entries on the topic, but all of the instructions were on how to do it in terminal, how to download obscure programs and install them from terminal, then run them from terminal, with all these arcane sets of switches and parameters. Eesh.
It comes with Ubuntu, after all. In the case of zipping files, all you have to do is to go to the File Manager, find the file(s), select it or them, right-click on it or them, and select Compress and file type zip. It's so simple.
There have been a number of other tasks where I wind up spending hours figuring out how to implement the advice offered in these forums through Terminal. The folks who offer the advice often are so good at it that they leave out steps obvious to them, but that take a lot of work for somebody not as skilled at it to find out. After crawling through broken glass to get the job done, and normally screwing something up so it's not quite right once I get it going, I figure out how to do it through the GUI and find out it takes a fraction of the effort.
if there is an application available to generate a list with files and folders from a location, like a hard drive or a folder? The list could be in any format, even a text file would be just fine.
View 3 Replies View RelatedI have a personal server that is password protected. I convert my movies, and make it so that I can watch them through a browser when I want to. I have quite a few movies. They are sorted into different directories. In each directory there is a WebM folder that contains the video file.
Here is what I want to do:Scan all of the directories and subdirectories in /var/www/ for files with extension of webm.
When a file is found, go to the parent directory and create an html file with the same name as the video, only with an html extension instead of webm.
Automatically enter the following html code into the file with the file name matching the file that was found.
Code:
Is it possible to do this with a script? Is there a GUI program that can do this? I don't mind running the script every time after I convert a movie, but if it could monitor the folders that would be nice.
I'm posting because I've read everything I can find on google and in the forum and the man page and still can't get it to work. I did read the FAQ, I hope I have adhered to it.I've tried several things and I don't remember exactly everything I tried and in what order.I've got several (12) HP ProLiant DL140 G3 servers running CentOS 5 that lockup about once a week. These are in a remote colo cage so I all i have access to is the built-in HP lights-out management interface, which includes a console, and ssh. I've been trying to get kdump setup to try to figure out what's going on. As an aside, if I run top on the console (via the management interface) the servers stay up for about a week, if I don't run top they crash within about 48 hours.I've used yum update to update to the latest available kernel (2.6.18-194.26.1.el5.x86_64) and installed the debuginfo and debuginfo-common RPMs from http://debuginfo.centos.org/5/x86_64/I have a single command in the /etc/kdump.conf file:ext3 /dev/sda5
View 4 Replies View RelatedI recently upgraded to Ubuntu 10.04. I love the passwords and keys application, but was somewhat surprised at the lack of a context menu in gnome to encrypt a file.
In general, I cannot find how to encrypt files using the keys I generate. Maybe I'm missing something? Probably, I just thought since Ubuntu comes with OOB key generation it would have OOB encryption capabilities.
I've read about seahorse and other ways to ADD encryption, I'm just wondering if ubuntu does it natively. It'd be a good idea to add to brainstorms, right click and encrypt.
i have a server & there is a website which generate alot of core files, these core files takeup alot of space by time, so i decided to stop it, in WHM the core dump option is disabled, & i used the following command
Code:
ulimit -c 0 but nothing stoped generating core files, i also used the following method http://www.cyberciti.biz/faq/linux-disable-core-dumps/ also this method doesnt stop generating of core dump files, my question is : how i can permenantly stop generating core files for all users or for specific user
I streamed video through a my computer with mediatomb yesterday. The problem is that now, I got these huge log files. I am running out of memory (less than 1 gb left) as we speak. They're filled with ufw entries, but my question is:
I read somewhere about a program called logrotate that were supposed to keep logs from getting to big, is this wrong and should mediatomb generate 3 separate log files with 5gb of data each for just 2 hours of streaming?
I had some troubles on samba, so I re-installed it.After I uninstalled samba, I noticed old /etc/samba folder/ files were left, so I deleted all of them. Then I installed samba, however, no /etc/samba files were installed.How can I generate default samba configuration files??
View 4 Replies View RelatedMy Ubuntu Karmic install has a very useful Print-to-File Printer configured which allows me to generate Postscript and PDF files.
I have Windows XP running on Virtualbox and I want to be able to generate PDF files using this printer but there appear to be no Printers configured.
I have a test RHEL5 box, sitting in a brand new Dell blade rack on a PowerEdge M610, with a lovely Emulex OCm10102-F-M FCoE card connected to a Cisco Nexus 5000 switch. The whole setup is extremely new (the cards only recently became available for purchase.) We've finally worked with Emulex to get the cards functional, and we are ready to some stress testing to the SAN. My question now is, is there a good tool I can use to generate a large amount of traffic to a LUN? The Wintel team used a windows-only tool that showed an average of 6gigs/second throughput, so I need something that can generate very large files and simulate a consistent throughput to the LUN. I found iozone, but I'm having a devil of a time with it.
View 2 Replies View RelatedI got the following task from my boss. I have to find out if there is some alternative tool for create reports from Squid except SARG. Now, we use SARG, but my boss told to me, that the main problem of SARG is, that SARG generate huge amount files, which cause problems during migration our servers. He told to me the following condition for change of current tool (SARG):
* standard package of Debian
* generate less amount of files, optimal is to save reports to the database
So I would like to ask you if you know about some tool (I can not find some by google)... and the best would be if you told to me some practical experiences.
I am using awstats for my website report . but last 3 days i am not using awstats . now i check awstats,, when i give updatenow then it only shows todays report , we cant find last 3 days report.
View 1 Replies View RelatedI have apt-mirror working perfectly for my local repo.I have it sending me an email everyday after it runs.However, there is nothing in the email. I'd like for the email to show me how much data was downloaded, number of files, (the normal apt-mirror information when ran from terminal). Lastly, the clean.sh script contains nothing to do. What can I add to the script to clean up my repo (remove older packages, etc..) My repo keeps getting larger and larger. It's at 66.7GB now.
View 4 Replies View RelatedI am configuring syslog-ng on my server.
I suspect something to be wrong.
Is there a tool I can use in the shell to generate a log? So I can check that the log appear in the syslog file.
I m not able to find anything under boot.log file. Here is the output of boot.log files.
As you can see nothing is getting written inside the boot.log files .
How can i make all the events to be logged under boot.log file?
Code:
# ls -ltr /var/log | grep boot
-rw------- 1 root root 0 Jan 25 15:59 boot.log.4
-rw------- 1 root root 0 Feb 1 18:38 boot.log.3
-rw------- 1 root root 0 Feb 9 00:00 boot.log.2
-rw------- 1 root root 0 Feb 16 17:57 boot.log.1
-rw------- 1 root root 0 Feb 20 04:02 boot.log
I just upgraded to lucid and discovered a nasty bug. It prevents the system from booting and took me hours to resolve. Now I'd like to report it along with the workaround I found. The only problem is: Where? Other such bugs have been filed against "update-manager", but that's just the GUI calling some scripts which do the real work. so what do I do?What should I substitute for XYZ in
View 1 Replies View RelatedI have setup a cluster.Which is basically a few Virtual Machines running and the applications running in them which are accessible on internet. He has asked me to send him a weekly report of this work. I am sys admin guy who understands ssh,telnet,ftp,tftp,TCP I am not able to understand what should I write in report.Because all the servers are perfectly running and applications are also running on top of them and I am done with this.So basically from my part I do not have any ssh or ftp to write in a report like this.Can some one give me a link if there is some sample report that I should send.I am not able to understand what do I need to Google for the same.
View 8 Replies View RelatedNot only that but I need tons and tons of them generated, and I need it to be totally random each time.
Code:
matthew@mvm:/h/misc> cat a
#!/bin/bash
for i in {1..5}; do
echo $RANDOM
[Code]....
There you can see that it is the same number. It does that every time!! Grrr. The strange thing is each time I manually type [or copy & paste] it into the terminal, it gives random [not static, like I am getting from my script] results.
The reason I want this is because I am making a script where this line will randomly go up or down [depending on if the random number is 1 or 0].
Is there a way to report the contents of the file cache held on RAM?
View 1 Replies View RelatedI am running a Cron job which mails the content of a log report every day. The problem is that the contents are sent as an attachment instead of as the body of the email. The strange thing is that if I run the instructions from the command line everything works fine, but if I do so from the Cron job the log report is attached instead of being sent inline.
The instruction I use is:
Code:
mail -s "logfile for cron" cron@example.com </var/log/cron-log
Following some advice I read on a blog I also tried this instruction in my Cron file, but the result is the same: it works fine from the command line, but attaches the report when run from Cron:
Code:
echo "Content-Type: text/plain;" | mail -s "logfile for cron" cron@example.com </var/log/cron-log
How to ensure the content of the log file is inline?
Installed configured the squid2mysql, now i can get the control panel but the report is not storing in the database
other wise if you are having any other squid monitoring tool
How to generate a list of all available man pages on a system?
View 4 Replies View RelatedFor using SSH, why does a host also need to have a public and private key? And how can I generate a public/private key pair for myself?
View 5 Replies View Relatedsystem debian php-4.x.x.src.deb. What actions should be performed that would build the binary deb with support memcache, mhash, and mcrypt? Assume that all the required packages of libraries installed on the system. system centos php-4.x.x.src.rpm. What actions should be performed that would build the binary rpm with support memcache, mhash, and mcrypt? Assume that all the required packages of libraries installed on the system. There is the software raid1 md0 Disc / dev / sda / dev / sdb. You must configure grub, that would have been able to boot from both drives. Assume that only one section ("/"). Generate for httpd ssl key and integrate into the system. to generate without a password or to provide a password script. Scan open ports and see what processes are installed network connections. What ports must be left open to normally closed firewall for full operation and setup http server (http, https)? Write a shell script that would produce an analysis of processes mysql and delete those that connection more than 5 minutes excluding system processes (eg replication), as well as sending mail warning in the log if an error occurs mysql string ABCDEFGH. Provide autostart at boot time (integration in init.d), protection against re-run, exception handling (when using lock files).
View 3 Replies View Related