When follow the below step for patching the file diff file1 file2 > patchfile.patch patch -p0 file1 < patchfile.patch but I got the following error after that Reversed (or previously applied) patch detected! Assume -R? [n] I dont know what happen here Kernel version is:
2.6.9-89.0.20.ELsmp
patch version is:
patch-2.5.4-20
I have a script: `cd $FILEPATH && patch -i $TMPFILEA2$FILETMPPATH` Variable $FILESPATH is = /tmp/ardiff.AvUUGfOKa2/a/hello/ and Variable $TMPFILEA2$FILETMPPATH is = /tmp/ardiff.AvUUGfOKa2/b/hello/hello.c.patch. I don't know, why is it no working from script file, it write me message to terminal: ./ardiff.sh: line 242: patching: command not found.
But I have no PATCHING command there!!!! The paradox is, when I want to patch it from terminal (I write it to terminal by keyboard, it works).
I just want to upgrade my Slackware 13.1 kernel (2.6.33.4) to the latest stable kernel from kernel.org (2.6.38.2). I have never done anything like this and I am a Linux newbie, so I would appreciate a "Kernel Patching for Dummies" version if possible. I did do a search on this forum and most of what I read was over my head. I found an FAQ on kernelnewbies.org on "How To Apply A Patch" but when I attempted what they suggested, it said it couldn't find the file to patch at line 5 and asked me which file to patch. So I CTRL-Z'd out of there and came here. Here's what I tried:
[code]...
i want to know why do we need to patch files based upon diff when we can directly overwrite the old file with the new file.
View 4 Replies View RelatedI'm trying to install a patch but when I copy it into terminal I get message " /home/john/patch-modules_v62-opensuse.sh 'vmware-7.1.3-2.6.37-rc5.patch' not found. copy it to the current '/home/john' directory. Exiting" But I have it in my home directory!
View 3 Replies View RelatedI'm running spamassassin and want to install the fuzzyocr module for it. One of the dependencies of fuzzyocr is 'giflib' but according to the fuzzyocr page, it needs to be patched before I install it, with a patch which they supply on the fuzzyocr download page. I've tried to install the patch and get the following error.
[Code]...
I have a log file that has an I/O Error about halfway in. It is a syslog file with Sendmail log entries. I need to break into smaller files. I tried using a simple egrep command creating new files by the date _egrep "^Sep 19" filename_ but the command hangs when it hits the I/O Error.
I tried split but it bails out when it hits the I/O Error. Is there anyway to read the file and get past the I/O Error? IS there a way to read the file from the bottom up so I can get the data from the top and bottom?
I want to inplement kgdb on 2.6.27 kernel.over ethernet.. but I am not able to get the patch file for this version.. where I can get patch file for kgdb over ethernet
View 2 Replies View RelatedI faced a issue with updating a file contents with echo command which fails with error as below:
echo "foo" > bar //to create a file named "bar"
echo "foobar" > bar //to edit its contents
The latter fails, it prompts "File exists" i.e.
~>echo "foo" > bar
~>echo "foobar" > bar
bar: File exists.
~>cat bar
foo
~>
find /var/spool/mqueue -group abc -exec rm -rf {} ;Using above command , I delete all the files belong to group abc.Now the problem i face is that the this command gives error that some files are missing . And this error occur because after creating list of files, it pass that list to rm -rf but till that time sendmail process queue and some of files disapper from /var/spool/mqueue.
View 5 Replies View RelatedI was installing PECL extension. i have downloaded the setup. then whatever process is mension in this link i have done that. PHP: Installation - Manual. when i m doing patch <patchfile i m getting this patching file ssh2.c Hunk #1 FAILED at 477. 1 out of 1 hunk FAILED -- saving rejects to file ssh2.c.rej
View 1 Replies View RelatedI am trying to run a script called install.sh as follows: I get a jar file, and extract it using the command: unzip filename.jar -D path/to/files then I navigate to that directory where I extracted the files, and run the command: sh install.sh (where install.sh is one of the files that has been extracted in that directory using the above unzip command.) running this command gives me an error:'nstall.sh: command not found.' among other errors in the script ( from that portion of the script that should not even be executed, which is really weird). However, instead of unzipping the jar file, if I just copied the same install.sh file to that folder, and ran the 'sh install.sh' command, the script runs fine.
View 6 Replies View Relatedis there a way to remove a patch from a kernel?
I need to apply a squashfs-lzma patch (squashfs 4.1cvs) to the liquorix kernel source which is already patched with squashfs 4.0.
how would I do that?I tried googling got this. url
but I dont know the command used to apply the patch the patch is called
35.4-3.patch.gz
url
but that patch includes more than squashfs,etc
How to get the Q2 patching logs of particular server (Linux 2.6.9-100.EL)
View 1 Replies View RelatedI need to perform patching on some RHEL boxes.
This the first time i am gonna do this. Kindly advise, how and what are the steps i should take to perform the OS patching.
We make everyday a DB Mysql backup on Linux redhat Enterprise. We are using a bash shell script (and putting it in the crontab) to execute it automatically everyday. We added a line to this script telling, once the backup has completed, to find old backup files (stored on hard disk after each backup) older than x days to remove them. We use the find command (search for file type) with the mtime option and in combination with rm command. Everything runs ok but we also want to add some new code to the same line: If find command cannot find anything or fails, for example if it cannot delete file or fails, send the error message (standard error output) to an error file (like error000001 and increasing) and mail the errorxxxx file to an email address for example to admin@companyname.com. What would be the code for this issue to add it to our find command in the same bash shell script??
View 2 Replies View Relatedsimple scan error as follows: Failed to save file ImageMagick returned error code 11 Command line: convert -adjoin /tmp/simple-scan-DA9MBV.jpg /tmp/simple-scan-XCK4BV.jpg /tmp/simple-scan-NZVYBV.pdf Stdout: Stderr: using karmic note: I have apparmor extra profiles installed but didn't notice one that related to simple scan or imagemagick. Red herring or not?
View 6 Replies View RelatedI am beginning to start to work with compiling and I get some confusing output adding patches to sourcecode (xosview-1.8.3). (The patch is for suppressing warnings while running the make command : deprecated conversion from * char to ** char ) Xosview compiles without the patch. The patch itself contains 17 files to add mostly const char instead of char. It is one single file containing also files in one subdirectory.
While running `patch < PATCHFILE.patch I had to copy'n'paste the filenames of the subdirectory to the terminal to keep it going. To get it going without much manual input I split it up for the two directories. I got the original patch and both splitted patches succeeding but with confusing output like :
patch unexpectedly ends in middle of line Hunk #2 succeeded at 78 with fuzz 1.
or just
patching file nfsmeter.h patch unexpectedly ends in middle of line # I splitted the original patch to every 17 files and this kind of output I get now at almost every patchfile. I downloaded patch source from debian
and running `pfind` (Puppy-linux speciality .sh) for search text in files showed off patch.c
Quote:
if (verbosity != SILENT)
say ("Hunk #%d FAILED at %s.
", hunk,
format_linenum (numbuf, newwhere));
} else {
if (verbosity == VERBOSE
[Code]........
As you can see the patch is working but what would I have to add to the patch? I added more newlines , added all lines to close a "{" if the patched line was inside ( also added "}" ), adjusted the path at the diff -uraNd /PATH/ -line, even deleted the diff line.
I am an extremely inexperienced user of command line computing (I am working with Terminal.app on Mac OS X Snow Leopard) who is trying to compile Fortran code with the G95 compiler. I have created a folder within the G95 directory that I would like to use for storing all of my code files, but when I try to cd from the G95 directory to the new one that I created, I get the above error. I can cd to other folders within the G95 directory, and have tried all combination's of capitalization.
View 14 Replies View RelatedI know my way around MS Windows much better, but I just don't feel right trying to program something for Android on a Microsoft operating system. I am interested in Android programming so I followed the instructions on [URL] to install the environment on my computer...
I just installed the JDK, SDK, Eclipse successfully (or I assume):
* When I get to Step 4 where I'm supposed to run 'android' it will not run. I get the error message "android: command not found" (I am definitely in the right directory).
** When I double-click it in nautilus, it opens up in gedit. I can set the permissions in nautilus (through the properties - Allow executing file as a program) and get it to work,
My system:
Intel i7
Ubuntu 10.10 Maverick Meerkat
android-sdk-linux-x86
eclipse 3.6.2
I've been working on getting the latest patch for wow to work and i have it downloaded and installed up to 4.0.0 but i know it's supposed to have gone one more patch to 4.0.1. Now when trying to run wow.exe through wine i get two different issues, first one is fatal error 132 comes up then if i relaunch wow it will pull up the user agreement screen but all graphics are gone just showing text.
If i accept and go to the log in screen i'm still only seeing the text no graphics, after that it goes to the downloading update then i get a message saying wow has encountered a serious problem, then it closes. I'm not the most knowledgable on linux but had been running wow perfectly fine till this patch..
I am using openSUSE 10.3.When I install software from tarball then to record time required I send output of date to beg.txt(when installation begins) and end.txt (when installation finishes).How can I append output of date to a file so I don't need two files?
View 4 Replies View RelatedI get following error during automatic patch upgrade of my SuSE 11.2 to latest path revision. I assume it is due to the KDE 4.3.5 Update part of the patch set: compiz-kde4-0.7.8-9.14.x86_64 requires libkdecorations.so.4()(64 bit) but there are no providers. The package manager suggest to replace compiz-kde4-0.7.8-9.14.x86_64 with kwin-4.3.5-0.2.1.x86_64 but I don't want to loose compiz-kde. which repository I must add to resolve the dependency.
View 4 Replies View RelatedHaven't booted to my linux in a while. Just did. Many updates. I'm betting this error:
W: Failed to fetch http://us.archive.ubuntu.com/ubuntu/...0.8.04_all.deb 404 Not Found [IP: 91.189.88.30 80]
I m using Redhat Linux 5......I am trying to install Nero 4 DVD Writer s/w...It is an exe file ...
I have given permission like this:
Then i execute the file like this:
Its showing error like this:
when i use rsync command to backup my image file , it shows the following error message.
bash: line 1: /usr/bin/rsync: Argument list too long
rsync: connection unexpectedly closed (0 bytes received so far) [receiver]
rsync error: remote command could not be run (code 126) at io.c(463) [receiver=2.6.8]
The command which i used is rsync -avrl -e ssh cms@server:/data/cms/data/images/* /mnt/Backup/Intranet_cms_backup/images
use gcc command to compile a *.c file error:unrecognized option '--eh-frame-hdr' why is it? and how to solution it?
View 2 Replies View Relatedstuff about a kernel speed up patch? Here is one Article The Linux desktop may soon be a lot faster - Computerworld Blogs And Yet another even stranger kernel speed up here:
Alternative To The "200 Lines Kernel Patch That Does Wonders" Which You Can Use Right Away ~ Web Upd8: Ubuntu / Linux blog I have no idea if any of this stuff is true, but lets see some of our high power guys check it out and let us know what is true or not.
I need to be able to convert HTML email messages saved as text files (.eml or .msg) to PDF documents, one PDF per email, retaining formatting and images.
Are there any Linux tools that will allow me to do this from the command line (so it can be scripted)?
As in windows all the delted items will got to RecycleBin is there any such thing in linux.
(Or)
Can we retrive the file which got removed from file system(using rm command)