General :: Get A Fully Functional Machine From The Scratch?
Jan 5, 2010
I recently installed CentOS 5.4 in my laptop. Initially I had difficulties in getting the machine up and running. So I went with the option of installing just the bare bones of CentOS 5.4. I did this by clearing all selections that are shown by default when you load CentOS 5.4 CD 1/6. This installed just the kernel and created only the root user. Right now, my laptop boots up in command line and I can login only as root. I would like to know if there is any document or any web URL that explains how to get a fully functional system from the scratch. Something like an installer manual or check list with instructions. Is there any document that you can refer to in situations where you have to manually install the drivers and configure the system because of some odd combination of hardware the machine has.
View 14 Replies
ADVERTISEMENT
Jan 5, 2010
I recently installed CentOS 5.4 in my laptop. Initially I had difficulties in getting the machine up and running. So I went with the option of installing just the bare bones of CentOS 5.4. I did this by clearing all selections that are shown by default when you load CentOS 5.4 CD 1/6. This installed just the kernel and created only the root user. Right now, my laptop boots up in command line and I can login only as root. I would like to know if there is any document or any web URL that explains how to get a fully functional system from the scratch. Something like an installer manual or check list with instructions. Is there any document that you can refer to in situations where you have to manually install the drivers and configure the system because of some odd combination of hardware the machine has.
View 2 Replies
View Related
Sep 6, 2010
Trying to upgrade the following packages in Squeeze: apt apt-utils aptitude libept1 python-apt synaptic
The output terminal gets hung up with this message: WARNING: terminal is not fully functional /tmp/tmp9PEsnI (press RETURN)
After pressing RETURN:
apt (0.7.26-exp3) experimental; urgency=low
* apt-ftparchive now reads the standard configuration files in
/etc/apt/apt.conf and /etc/apt/apt.conf.d
[code].....
View 4 Replies
View Related
Apr 6, 2011
I am once again trying to get a fully functional desktop at work without a dual boot setup. One issue is file searching. I have looked at beagle, tracker and Google Desktop. I am currently testing Google Desktop and it appears to work well, but it is not integrated into nautilus and it appears to not index my email in evolution that is accessed via an exchange server.
Beagle appears dead. Tracker looks promising, but I can't tell if it integrates into Nautilus currently without rebuilding Nautilus. If you use Tracker, can you tell me how it works with Nautilus, mapped cifs drives on windows servers and evolution in exchange mode. Also, the current version of tracker is 0.10.6, but on 10.04 only 0.6.X is available and Natty looks poised to ship with 0.8.X. Is there any advantage to compiling it? Are there Ubuntu specific tweaks that are lost if you go with source?
View 2 Replies
View Related
Oct 11, 2010
One of the dedicated servers that I have does not seem to have the service 'named' functional:
root@server2 [~]# service named start
Locating /var/named/chroot//etc/named.conf failed: [FAILED]
Note that the double slashes (//) ARE part of the output as well as the long gap before [FAILED] appears. This 'named' service not being functional is not a problem which is preventing the server / the application on it from working. There are entries in /etc/resolv.conf though.
View 1 Replies
View Related
May 23, 2010
to anyone that can help. new to linux. impressed just not sure how to get my broadband dongle to work in linux. in windows it runs automatically. i am with linux ubuntu which picks it up but i cannot run the setup.
View 2 Replies
View Related
Feb 19, 2011
I have a home computer that I bought to try Linux. first I want to reformat the HD so it is completely empty, it has xp now, then start from scratch. But I have not been able to format the HD. I have used all the tricks I know.
View 1 Replies
View Related
Jun 22, 2011
Starting from what I would think is completely from scratch, maybe worse. A friend set up this computer on unix/linux when I expressed interest. Truthfully I don't have even the slightest clue where to start other than to offer my complete humility. If I could start with getting my dvd and cd functions to work that would be a good start.
View 15 Replies
View Related
Oct 26, 2010
I am looking into creating my own terminal command from scratch. I researched online for some information on this subject was only able to view stuff related to OS X. I understand that they are both Unix based, are they both similar in creating these commands? Basically all I would like is for someone to point me towards the right direction to start or complete this task.
View 11 Replies
View Related
Feb 21, 2010
I have only a CD Drive and the system is stand alone. Do I use the 5 CD set or Do I use the "Live" CD Thing?
View 2 Replies
View Related
Jan 4, 2011
I have a SUSE SLED system running without window manager (KDE or GNOME). I don't have the DVD but I have access to a network repository.
How do I install KDE from scratch?
View 3 Replies
View Related
Jun 28, 2010
I have C in a Nutshell but I'm learning Bash right now. I've gone through a lot of LFS, but didn't complete it. I'm still learning about symbolic links, hard links, libraries, and this sort of thing. I'm wondering about quite a few things at this point. How the hell can anyone make a distribution from the ground up? Even if they start with another distribution as a base, how do they know (I realize one person doesn't do all the work) what to do, what order to do it in, how to synchronize what they're doing with what everyone else is doing, etc. How do you know which software to compile and install first? etc.
Also, I'm entirely confused by this: how can everyone (even large teams) get everything working together? Knowing that this works with that and that doesn't work with this unless it's patched but that's what we're going with, etc. I can't understand how these things can be done without an almost unbelievable amount of effort unless a lot more is done by ./configure and make than I know about at this point.And I don't understand how libraries work at all. I mean, I'm going to learn a lot more and I've been reading a lot... but how can all the distributions just download and install 50 updates at a time and not have to restart the computer most of the time!? There are a hundred things happening in the background constantly. How does everything not just fall apart as soon as you update one package, let alone 50 at a time!? I realize this is stuff that you learn by reading, but I've been reading for quite a while now and I do not understand even the basics about why any of this works or how to know what works and what doesn't unless every single little piece of every distribution is gone over with a 50,000-page reference manual that's constantly updated. And all of this can't be as complex and hard to do as it seems, or there couldn't possibly be a hundred distributions that work and are updated constantly. Linux From Scratch is a good example. You have to download all the very specific versions of the software and patch it with special little patches, etc. How the hell can anyone keep track of all of this? Going by what I know about things, it's almost hard to believe that it's even done.
View 14 Replies
View Related
May 13, 2011
I have forgotten my user password and cannot get past the logon screen. Is there a way to recover beside reinstalling Ubuntu Studio from scratch? (I am new to Ubuntu Studio).
View 4 Replies
View Related
Feb 16, 2010
I need to run another little GUI application xyz after Firefox gets loaded up fully. How do i find that firefox has fully loaded?If i runQuote:
#!/bin/sh
firefox
xyz
[code]...
View 1 Replies
View Related
Sep 3, 2010
IS SELinux fully supported by debian
View 1 Replies
View Related
May 10, 2011
I tried copying files from my ubuntu computer to a usb drive. But the file transfer doesn't complete and gets stuck at some point.
Ex: If I try to copy a file having a size of 622MB, the files transfer runs smoothly till maybe 617MB and then doesn't proceed at all.
View 1 Replies
View Related
Mar 30, 2011
Is there anything that Windows can and GNU/Linux can't in Web programming and design?
View 10 Replies
View Related
Nov 18, 2009
While I have been using Linux for many years (Slackware), I have found myself facing a special need that I can't quite figure out.I work at a club where I use iMovie on my Mac to create a DVD that plays on all of our TV's displaying our upcoming lineup of bands.In order to save on DVD's, I would like to create a very small form factor PC running Linux with the following requirements: the computer must boot into Linux and log itself in, the computer will boot up with a thumb drive attached containing a movie file of the most Linux compatible video format. After booting up and logging itself in, the video on the thumb drive must start playing automatically in full screen mode and in a continuos loop.So the whole thing needs to be automated from boot to playing movie; only the power button should ever need to be touched.
View 3 Replies
View Related
May 4, 2010
Out of curiosity, can you chainload a Linux system via a Windows executable within Windows at the ordinary desktop?Knowing windows there would be enough holes to write at any memory address without "permission", but can it be done with a humble executable? Or is Windows just too active, without the chance of nothing happening at any one pointo that everything can be exited cleanly non-existent?I'm not asking for a program or guide to do this and neither do I aim to do it. As I've stated it is all out of curiosity on whether or not some sort of protection is in place to stop this kind of thing
View 5 Replies
View Related
Nov 30, 2010
How do you transfer files on a Linux machine with ftp,sftp and scp disabled onto a remote machine
View 2 Replies
View Related
Jul 29, 2009
I successfully installed the virtual box on my fedora 8 system, and also created a virtual machine with windows xp OS, it works nicely, I try to configure the serial port of my virtual machine and try to configure the path for the port "screen shot are attached" it gives me the error message also the "screen shot are attached" for your review.Is kind of mistake is going on during the path setting, and how to set the path for configuring the serial port of my virtual machine so that I can use the hyper terminal tool of windows.
View 4 Replies
View Related
Jul 14, 2011
I have some file tools on a mint machine that I would rather not install on my mac laptop. Mainly because of the vastness of apt-get and the low risk of installation failure. Anyway, every so often I have a file that I want to process in place using some remote tool. Both machines can ssh right in to each other so I was figuring there must be some script or tool out there that would allow me to type out something like remote [file] [tool & args] to send my file to the other machine, get it processed, then get it back.
View 4 Replies
View Related
Aug 13, 2010
I'm know very little about Linux but decided to set up a machine running Drupal CMS on a Debian machine and it won't go. The folks at Drupal have tried to help but it seems the Debian OS won't do it's PHP thing for Drupal.
That means i'll have to start at the START I guess.
how to become a master of Linux if one is starting from ABC (I can add and subtract, that's what it feels like)
View 2 Replies
View Related
Jun 12, 2010
When the install button is pressed an error sign says "metalink is missing".Is there a way around this or better still a way of removing windows altogether and start from scratch?
View 4 Replies
View Related
Aug 3, 2010
I'm the Administrating the computers in my office. I want to monitor the user's activity. How can i remote login without distrubing the user's activity on his computer? Any software need to be installed? (I don't want to use Terminal server client).
View 5 Replies
View Related
Feb 4, 2011
I have an older Compaq MT D220 with 2.4 GHz Celeron proc and 756 MB RAM, with F14 installed exclusively. I've yet to get Skype completely functional under these conditions. The loopback audio only test usually produces no sound or very broken sound. I tried upgrading my DSL from 3MBps max downstream and 0.5MBsp max upstream, to 6MBps max up and 1Mbps max down - to no avail!
System Monitor shows CPU and memory are below 100% utilization, and Skype's real time call stats show 0 packet loss. Perhaps using a leaner GUI than Gnome? I'm happy to report that as expected, other than this Skype issue and some lingering DVD-ROM and BackupPC issues, this old HW is much more tolerable with F14 than Windows XP!
View 2 Replies
View Related
Mar 13, 2011
Has anyone got LIRC up and running on 11.4? There are some basic built-in remote functions from imbedded IR drivers in kernel but no specific LIRC functionality. Will 11.4 need lirc-kmp-desktop etc?
View 9 Replies
View Related
Mar 8, 2010
How can i copy a files from Machine A to Machine B.Which is LAN connected
View 4 Replies
View Related
Nov 6, 2010
I am very eager to get two-finger scrolling in my acer 5740, but the big issue is my touchpad is not fully functional
"xinput llist" already detects the touchpad as
SynPS/2 Synaptics TouchPad id=12 [slave pointer (2)]
The xorg log shows dual loading of touchpad driver
(**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
(**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[Code]...
But still after completely removing the xorg log and restarting the X, the log reports as
(**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
(**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
"synclient -l" though shows a long list of already set values, the touchpad is not working properly. How can I prevent this dual loading of drivers ? Kindly enlighten me , so that I can have a properly working touchpad. If any more info is required, then please ask me. There is no xorg.conf. I tried to generate one by "Xorg :1 -configure", but the generated file did not have any section related to touchpad.
View 2 Replies
View Related
Feb 7, 2011
at first I have to apologize for my poor English, but I'll do the best to explain what I need. I've got two webservers. One with CentOS 5.5 and the other one with Fedora 14 (both x86_64). There is the same configuration/compilation of LAMP.
Apache:
Code:
./configure
--prefix=/usr/local/apache/2.2.17
--enable-module=most
--enable-module=so
--enable-shared=max
[Code]...
These are the configurations. They are the same on Centos and Fedora. But as I said. the FcgidMaxProcessesPerClass doesn't work (I'm testing it trough ab), even that I see Server API - CGI/FastCGI in phpinfo(). I've been fighting this problem whole week and I'm a little desperate,
View 1 Replies
View Related
