I have a home computer that I bought to try Linux. first I want to reformat the HD so it is completely empty, it has xp now, then start from scratch. But I have not been able to format the HD. I have used all the tricks I know.
View 1 RepliesStarting from what I would think is completely from scratch, maybe worse. A friend set up this computer on unix/linux when I expressed interest. Truthfully I don't have even the slightest clue where to start other than to offer my complete humility. If I could start with getting my dvd and cd functions to work that would be a good start.
View 15 Replies View RelatedI have this 11.0 64bit workstation here. It has been running flawlessly for the longest time. It is setup really nicely for this particular job.Anyways, I would to upgrade it to 11.2 64bit without starting from scratch. What would be the best, simplest way to do this?
View 9 Replies View RelatedI was a Jaunty user and then updated to Karmic. Wireless went from being sporadic in Karmic to non-existent after I tried the wrong fixes. I've changed so many settings and tried so many fixes that I don't know which way is up with the wireless. I'd like to start from scratch. If I install from CD, will it just write over my current ubuntu partition? Will the contents of home stay intact or will everything disappear? Do I have to create a new partition?
View 2 Replies View RelatedWondering if any know of a program that I can use to make an exact image of my fedora 13 operating system and transfer it to my new hard drive. I want to upgrade the hard drive and reinstall the exact system from the original drive to my new one, without starting from scratch. Just wondering if there's a program for Fedora 13 like Norton Ghost.
View 3 Replies View RelatedI'm booting ubuntu from my android phone via USB and it works great, the thing is anything i install or do while using ubuntu isnt saved the next time i boot from the usb unless its saved in my phones storage. I want to be able to keep booting ubuntu the same way but keep the programs i install there for the next time instead ohttp://mac.bigresource.com/add/add.phpf starting from scratch everytime.
View 3 Replies View RelatedI am looking into creating my own terminal command from scratch. I researched online for some information on this subject was only able to view stuff related to OS X. I understand that they are both Unix based, are they both similar in creating these commands? Basically all I would like is for someone to point me towards the right direction to start or complete this task.
View 11 Replies View RelatedI recently installed CentOS 5.4 in my laptop. Initially I had difficulties in getting the machine up and running. So I went with the option of installing just the bare bones of CentOS 5.4. I did this by clearing all selections that are shown by default when you load CentOS 5.4 CD 1/6. This installed just the kernel and created only the root user. Right now, my laptop boots up in command line and I can login only as root. I would like to know if there is any document or any web URL that explains how to get a fully functional system from the scratch. Something like an installer manual or check list with instructions. Is there any document that you can refer to in situations where you have to manually install the drivers and configure the system because of some odd combination of hardware the machine has.
View 14 Replies View RelatedI have only a CD Drive and the system is stand alone. Do I use the 5 CD set or Do I use the "Live" CD Thing?
View 2 Replies View RelatedI have a SUSE SLED system running without window manager (KDE or GNOME). I don't have the DVD but I have access to a network repository.
How do I install KDE from scratch?
I have C in a Nutshell but I'm learning Bash right now. I've gone through a lot of LFS, but didn't complete it. I'm still learning about symbolic links, hard links, libraries, and this sort of thing. I'm wondering about quite a few things at this point. How the hell can anyone make a distribution from the ground up? Even if they start with another distribution as a base, how do they know (I realize one person doesn't do all the work) what to do, what order to do it in, how to synchronize what they're doing with what everyone else is doing, etc. How do you know which software to compile and install first? etc.
Also, I'm entirely confused by this: how can everyone (even large teams) get everything working together? Knowing that this works with that and that doesn't work with this unless it's patched but that's what we're going with, etc. I can't understand how these things can be done without an almost unbelievable amount of effort unless a lot more is done by ./configure and make than I know about at this point.And I don't understand how libraries work at all. I mean, I'm going to learn a lot more and I've been reading a lot... but how can all the distributions just download and install 50 updates at a time and not have to restart the computer most of the time!? There are a hundred things happening in the background constantly. How does everything not just fall apart as soon as you update one package, let alone 50 at a time!? I realize this is stuff that you learn by reading, but I've been reading for quite a while now and I do not understand even the basics about why any of this works or how to know what works and what doesn't unless every single little piece of every distribution is gone over with a 50,000-page reference manual that's constantly updated. And all of this can't be as complex and hard to do as it seems, or there couldn't possibly be a hundred distributions that work and are updated constantly. Linux From Scratch is a good example. You have to download all the very specific versions of the software and patch it with special little patches, etc. How the hell can anyone keep track of all of this? Going by what I know about things, it's almost hard to believe that it's even done.
I have forgotten my user password and cannot get past the logon screen. Is there a way to recover beside reinstalling Ubuntu Studio from scratch? (I am new to Ubuntu Studio).
View 4 Replies View RelatedWhen the install button is pressed an error sign says "metalink is missing".Is there a way around this or better still a way of removing windows altogether and start from scratch?
View 4 Replies View RelatedI'm running openSUSE 11.2 KDE 64 bit. I'd like to install everything required for the Android SDK. I don't have any of it installed atm. Can anyone recommend an existing how-to? All I find are Ubuntu-specific tutorials. I'll need to install java, eclipse, and the Android SDK. I have not used/installed any of this before, so I'm looking for a detailed, step-by-step guide for openSUSE 11.2 KDE.
View 6 Replies View Relatedon my laptop, I have configured my power button to hibernate the system. It works, but once a while the system, after booting and while almost being where Gnome desktop appears, reboots itself from scratch.
Configuration:
- EeePC 1000HE
- Debian Squeeze up-to-date
- Hard-disk encryption via LVM installed while installing the system
I want to install GNOCHM to (application to view chm files) view .chm files on ubuntu. Now, as far as from what ive learnt, it isnt available as a complete package on the web and has to be compiled, etc.. I have no idea how its done..
So iwould be really grateful if someone taught me how to start from scratch.. For a start, ive downloaded the gnochm-0.9.11.tar.gz from the sourceforge site.
Does anyone know how to start back from scratch? Im thinking Im just going to not do what did before and start all over *sigh*
View 9 Replies View RelatedI have an old computer I have setup as a backup computer / Linux practice computer. It is a Sun Ultra2 w/ 2x200MHz SPARC CPUs, 512MB RAM, 9.1GB SCSI HD, and Creator 3D video card. It is running Debian 6, by default with no GUI installed. But, I am wanting to try out several minimalistic GUIs with it. So, first thing I did was:
aptitude install icewm
aptitude install xserver-xorg-video-sunffb
aptitude install rcconf (used to disable X from automatically starting)
aptitude install xfe
startx
And well, it worked. Well, for some reason, I couldnt read any of the buttons in xfe, and it was stuck in the upper left corner of the screen. So then I tried PCManFM, which was better, but the icons were still all blank. However, upon trying other WMs, I have had very little success. I got dwm working, but didnt try it out for too long before removing it and trying others. I was able to get LXDE to work, and that was that last thing I got to work. Now Ive tried IceWM again, as well as jwm, and every time I end up with a black screen.
By the way, any suggestions on a WM/FM (and maybe panel) combo would be greatly appreciated as well. Even with IceWM and PCManFM, this system is pretty slow. Its really going to mostly be used as a backup internet machine. Whats the bare minimum setup to get icons on the desktop?
i have just installed ubuntu 10.04 dvd version and ho and behold grub error 15 just amazing any way i enter the partition via live cd thinking i edit the menu.lst file and that it but the folder grub it completly empty what is going here and how can i fix this?
View 9 Replies View RelatedI want to reload windows xp + Ubuntu from scratch, I have no experience with dual-boot installation soNow we start with a blank 250GB harddrive in my Samsung N310 netbook, and then,Plan 1: partition the whole 250GB harddrive into 2 logical disk, namely drive c: and d:, both of them are NTFS, and then format them ==> install windows xp to Drive C: ==> boot from USB drive and run Ubuntu USB installer, and let the installer do its partition for Linux's EXT3Plan2:partition the whole 250GB harddrive into 3 logical disk, namely drive c:, d: and e:, with drive c: and d: being NTFS while drive e: being EXT3 ==> install windows xp to Drive c: ==> install Ubuntu directly to drive E:
The bottom line here is that 1) there must be 2 logical drives (both are NTFS) for windows xp; 2) I want a EXT3 partition where Ubuntu resides. Can any expert kindly advise me which plan mentioned above is more viable or feasible?
From what I have read around the net I should be able to set up my hard drive so that I have one small partition for Windows 7, one small partition for Ubuntu 10.04 and the remainder can be a third partition which contains all my files (accesible from both OS).irst question, is this possible?I tried to install Windows 7 first (I hear installing Ubuntu first creates havoc), then i tried to use the partition editor that comes with windows 7 and it wont let me shrink the partition any smaller than 700GB even though it is 98% free ( I have tried defragging thatdrive).Now Im wondering, can I use GParted to format my disk, then set up all the partition, and then install the OS's
View 9 Replies View RelatedI am dual booting Windows 7 and Ubuntu 10.10. When I am on Windows 7, I have no noise from the hard drive. When I use Ubuntu, every now and then I hear a short scratch noise from the hard drive. It didn't start doing it until installing Ubuntu when I was setting up the partitions.
View 9 Replies View RelatedI have 13.0 installed, everthing works OKI installed 13.1 on a separate partition, and dualbootWhen I use 13.1, there is a problem with sound.It's like in the old days when yu played an LP with a scratch, the track keeps repeating.When I move the mouse, sound will continue OK for a few seconds, then same problem.There is no difference, if I use KDE, XFCE, or just boot in runlevel 3 and use the command lineOnly thing I can find in the logs:Quote: May 28 06:37:10 cannabis kernel: hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.In 13.0, there is not such a line in the logs.Some info:Quote:
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
Subsystem: Fujitsu Technology Solutions Device 1107
Flags: bus master, fast devsel, latency 0, IRQ 22
[code]....
I recently installed CentOS 5.4 in my laptop. Initially I had difficulties in getting the machine up and running. So I went with the option of installing just the bare bones of CentOS 5.4. I did this by clearing all selections that are shown by default when you load CentOS 5.4 CD 1/6. This installed just the kernel and created only the root user. Right now, my laptop boots up in command line and I can login only as root. I would like to know if there is any document or any web URL that explains how to get a fully functional system from the scratch. Something like an installer manual or check list with instructions. Is there any document that you can refer to in situations where you have to manually install the drivers and configure the system because of some odd combination of hardware the machine has.
View 2 Replies View RelatedI cant seem to find any new good working How to setup SFTP from scratch. Im running CentOS 5.4
View 2 Replies View RelatedEvolution keeps asking me asking for the passwords for the mail servers I use for the key ring. And sometimes crashes if I try to cancel. I mean it asked yesterday and then again today.Is there anyway to reset the key ring passwords and start from scratch.Apparently to many things use key ring so it can't be removed.
View 4 Replies View RelatedI was wondering if anyone could provide resources on creating and installing keyboard layouts from scratch. I am a conlanger(I create languages), and I need to be able to map certain unicode characters to certain keys. I could do this via creating a font, however, It would be easier if I could just switch between layouts which is easier than switching between fonts. Especially, when I am using more than one program at once. I'm sorry because I have never used the Ubuntu forums before and I probably posted this in the wrong forum.
View 1 Replies View RelatedIn particular, this is with regards to freevo, but it applies to anything that can be obtained through apt-get.
How do i remove it, and re-install it, and start again from scratch? Time and again i do "apt-get delete blah", then "apt-get install blah", only to find it's exactly the same as it was in the first place, and still broken.
Why does this happen? How can i make sure everything is COMPLETELY GONE. I don't care about lost data, i don't care about lost config files, or anything. There is just one aim here - i want it to work again.
i really confuse now..many people gave recommendation for many book.i have little experience on networking
what is the best book for understand Linux Networking from Scratch..
Since CloneZilla doesn't include the MBR when saving a partition into a file, I need to take care of this myself. With a working XP in /sda1, I'd like to...
1. Boot with a Linux live CD
2. replace the Windows MBR with Grub, ie. without any Linux already installed
3. save Grub's configuration files into /sda2 (which is ext2fs-formatted)
4. add XP to Grub