General :: Forward System Logs To Syslog Server?
Sep 24, 2009I'm running Ubuntu Desktop 9.10. How do I get it to forward its logs to a syslog server (its running on a different machine)?
View 2 RepliesI'm running Ubuntu Desktop 9.10. How do I get it to forward its logs to a syslog server (its running on a different machine)?
View 2 Repliesconfigure syslog server on ubuntu now i want to export logs of windows and ubuntu desktop to the syslog server
View 6 Replies View RelatedOS CentOS 5.4 I have a DNS server that is logging all named and dns requests to the chrooted named directory. By default named logs to /var/log/messages but I want to isolate all the dns queries and requests to separate files. I know I can add entries to /etc/syslog.conf to "roll" the logs and logrotate should pick them up but fuzzy as to the syntax. I don't know what "tag" to use in the first fieild. for example
# Log anything (except mail) of level info or higher.
# Don't log private authentication messages!
*.info;mail.none;authpriv.none;cron.none/var/log/messages
Here is the logging section of my named.conf
# pwd
# /var/named/chroot/etc
logging
{
[code]....
how does one configure a Ubuntu 10.4 machine to write its logs to a syslog server?
View 1 Replies View Relatedi installed php-syslog-ng 2.9.8m in RHEL5 box. I saw logs from the local machine once the cron execute in every one minute.I dont need to appear those in my syslog console. I want to disable these from my linux box.How can i archive this
View 1 Replies View RelatedI am looking for an open source syslog server which accumulate the each and every log of Windows, Solaris, Linux and network devices. Currently I am using Syslog-ng which is not fulfiling my requirement in Windows clients, as I need the logs of every action which user performed after logon.
View 2 Replies View RelatedHow can I view a live log on a Linux Server, so that I can see new log entries instantly as they are being added?
View 1 Replies View RelatedCentOS 5.6 Server patched to latest, multiple name-based apache virtual hosts. SELinux OFF Everything was working fine until the other day. I've been making quite a lot of changes so it may well be something I've done, but I can't find out what! Last night I got the following in my logwatch : -
Requests with error response codes
404 Not Found
/admin/phpmyadmin/scripts/setup.php: 1 Time(s)
/admin/pma/scripts/setup.php: 1 Time(s)
/admin/scripts/setup.php: 1 Time(s)
/db/scripts/setup.php: 1 Time(s)
/dbadmin/scripts/setup.php: 1 Time(s)
[Code]...
The problem is that NONE of my logs, secure, httpd, messages, NONE of them, show any trace of these hacking attempts. They used to show up in secure and apache error logs, but no longer.
For remote syslog logging of the general log files, I set:
Quote:
How do I setup the remote syslog logging of apache logs? Do I just add a line in the httpd.conf file to for example ?:
Quote:
I installed syslog-ng so I can receive remote logs. this is working however since I disabled syslog on my syslog-ng server I am not logging in /var/log/messages cron and some others.locally)I know this is because my syslog-ng.conf only references remote and not local.How can I edit the syslog-ng.conf file so that I can receive remote and local? I tried this however when adding in portions of the default config, I only receive local and not remote logs anymore. I am forwarding my config.
# syslog-ng configuration file.
#
# This should behave pretty much like the original syslog on RedHat. But
[code]....
Currently Im having a syslog server that consolidate firewall logs on port 514 udp. Im also having a IDS device that I wish to push its logs to this particular syslog server so that I can retrieve my IDS logs on this server as well.
Is it possible to do so?Having syslog listening on port 514 for both firewall and IDS logs? If it is possible will the logs be recorded in a single log file?Or will it be recorded in a separate log file ie. firewall.log, IDS.log etc?? I wish to have them in separate individual log files or else there will be hard time segregating the log entries in a single file. Can anyone advice on how to achieve this??
I am searching that how i can configure syslogs/rsyslog to receive third party tools or softwares logs. For example i have a program that generates logs like when it is started and logs about its services, alerts if there are any alarms etc. I want to forward these logs using syslogs/rsyslog. Is their any possibility how can i achieve that
View 2 Replies View RelatedIn my system, I see two syslog configuration files, /etc/rsyslog.conf and /etc/syslog.conf.. What is the use of each file? I know only that of /etc/syslog.conf...how about /etc/rsyslog.conf? what is its use?
View 1 Replies View Relatedthe time on system clock given with 'date' command keeps moving forward about 1 minute for every hour of realtime. The box is up all the time so this is not an issue with motherboard battery. An equivalent box with the same hardwre/OS and applications doesn't have the same level of drift. I'm not sure what else this could be.Both boxes are Centos 5.2 64-bit.
View 2 Replies View RelatedWhere/how do I set the retention on system logs to a minimum of 180 days? Further, where do you set password failure enforcement policies?
View 1 Replies View RelatedI have it at lot that when a system crashes fatally and restarts (due to a power outage, kernel panic, tripping over a cord or something), there is no mention of it in the log. It just shows that the system was started. Is there a tool that will show this in the log? With a message like "system was not shut down properly or had a fatal crash / kernel panic" when restarting? It is pretty easy to do, just have a lock file somewhere that is removed when the system shuts down gracefully and that is left when it is not. And mechanism that checks this when starting up. It would also be possible to tell when the crash occured, as you can update the lock file from time to time and when the systems dies, it cannot anymore.
View 2 Replies View RelatedJust setup an ssh server...kinda. I need to forward the port (22) through my router. I have forwarded ports before for programs so the whole thing isnt a mystery. But i need to know what to put in for a couple boxes.... Private ip: ? protocol type: tcp, udp, or both?
View 3 Replies View RelatedHow to get the Q2 patching logs of particular server (Linux 2.6.9-100.EL)
View 1 Replies View RelatedI am installing RHEL 5.5 to be a syslog server to collects logs from servers (HP-UX, Linux, Windows and Cisco Network Devices). and i can now collect logs from my windows PC on syslog linux server by using Datagram SyslogAgent software. can collect logs from HP-UX 11.23 server. and i configuring the Unix server as in the steps below:
1. Log in as root
2. Go to /etc/syslog.conf
3. Add a line: *.*<tab>@<Sentinel Server IP Address>
*.* @10.15.1.5
4. Save and Close
# netstat -na | grep 514
tcp 0 0 *.514 *.* LISTEN
udp 0 0 *.514 *.*
[code]....
My server is rebooting frequently(4 to 5times a day) without any logs, can any one help me out to fined the cause for the unexpected reboots of the server. reboot system boot 2.6.18-194.3.1.e Fri Feb 4 15:16 (00:-24)
[root@elastix log]# cat /etc/redhat-release
CentOS release 5.5 (Final)
[root@elastix log]# uname -a
Linux elastix 2.6.18-194.3.1.el5 #1 SMP Thu May 13 13:09:10 EDT 2010 i686 i686 i386 GNU/Linux
[code]...
I am new in perl, i have a question i.e 'How to read individual logs from linux server into another log file using perl script', I need to capture the individual logs from different paths and output the result of those log files and store to a file in another location.These Logs are generated in Linux Server..
View 2 Replies View RelatedI am trying to install Wheezy testing i386 using netinstall .iso disk.
After the disk partition stage and while in the 'Install the base system' stage I get the message;
Debootstrap error:
The following error occurred: The bzcat is not available on the system Check /var/log/syslog or see virtual console 4 the details.
I have over the past couple of months downloaded three daily builds of testing and the md5sums are good on all of them yet I have the same problem with each disk.
I currently run kernel 2.6.34.7-66.fc13.i686 (sort of). When I select from the Gnome menu System -> Shutdown and select Shutdown from the dialog, my system only logs out, presenting me with the greeting screen. While this is a minor problem and I rarely shutdown my machine, it is mildly disconcerting.I have dropped back to 2.6.34.7-63.fc13.i686 and that shutdowns properly using this method. (Also, 2.6.34.7-61.fc13.i686 works properly). I can imagine that it might close some security issue in which an unauthorized user is able to halt the entire machine. Especially if this is something that will continue in future releases of the kernel.
View 5 Replies View Relatedtrying to replace syslog with syslog-ng. When I:
yum erase syslog,
wants to remove everything else that (presumably) has syslog as a dependency. how do I replace the dependency on syslog with a dependency on syslog-ng?
How to set up syslog server on Fedora 10 Linux server ?
View 1 Replies View RelatedIm trying to get syslog-ng to log ssh stuff to a own file (later i want it to be forwarded to a other server but thats a later problem.
The thing is that if i restart my syslog-ng server and login with ssh, it logs it. but when i login again it dont. But if i restart the syslog-ng daemon again it logs again, but only once.
Here is my config.
Code:
I noticed in my system that my root partition is getting full. I found a lot of old compacted syslogfiles. Had a look at etc/sysconfig editor eg cron but could not find a setting which allows to delete files older than a month. Where and how could I influence this ? I deleted manually all syslog files older than a month. Approx 6GB
View 9 Replies View RelatedWell it turns out my system has logged out more then once on its own. I had the system updated and upgraded from 7-3-11 and it did this about once a week. On 7-18-11 I did a full update and upgrade and it logged out a few times in a couple of hours. It does it while I am away and the system is in screen saver mode. I used my partition clone and restored the system back to 7-3-11. Has any one else ever had such an issue?
View 2 Replies View RelatedIs there any way to check an Ubuntu system for user logons or uptime that date back 1-2 months from the present day? I tried 'last' but it only seems to date back to Dec 02. I also had a look in System Log Viewer, but couldn't find any records going back far enough.
View 3 Replies View Relatedi have configured sendmail server in my lan and it is working fine for me.but there is one little problem for me. i want mails send sunita should be received by vinita.sunita and vinita both are normal users on same pc.
for this i made entry in
Code:
/etc/aliases sunita: vinita