General :: Finding The Installation Procedure For Vyatta 6.2
Jul 4, 2011im looking for installation procedure for vyatta 6.2...
View 1 Replies
ADVERTISEMENT
Debian Configuration :: Finding A Command That Can Search For New Usb Hardware Without The Described Procedure?
Mar 15, 2011I am using NetworkManager Applet in Gnome to connect to the internet with a 3G modem. After last update few days back it changed the way it was recognizing the modem. I used to click on the NetworkManager Applet icon on the notification area and choose my configured mobile connection from the list. Because, as I said, I am using mobile broadband connection and I have to check via SMS my usage in order not to overcome the GB I am supposed to use (to avoid overpriced charge). In order to use Wammu to send/receive SMS I have to close the internet connection by right clicking on the NetworkManager Applet and uncheck "Enable Mobile Broadband" otherwise Wammu can't use the usb dongle because it's locked by the internet connection. Up to this point all is working exactly the same. Except when I uncheck the "Enable Mobile Broadband" the NetworkManager Applet disappears and I can only get it back with a reboot. Also I tried clicking on the applet and choosing "Disconnect" from the menu. The applet stays there but there are no more options for mobile connection. Only wired connections and VPN (whatever that is). In this case if I disconnect and reconnect the usb dongle it recognise it again. So my question is: Is there a way to make NetworkManager Applet to always stay aware of the usb modem without disconnecting or rebooting? Or at least is there a command that can search for new usb hardware without the described procedure?
View 6 Replies View RelatedGeneral :: Mapping With The Router Vyatta?
May 5, 2010I am new working with vyatta routers and my problem is next:I am installing 5 ip cameras and i am using vyatta router. someone could help me how can i access remotrly by internet to my internal lan where are my cameras instaled. i have read about dnat but i'm not sure if also need to configure ports tha i previosly asigned to cameras i get confuse with that because only find mapping configuration ip address but not ports.
View 1 Replies View RelatedDebian :: Software - Installation Procedure Or A Package
Dec 16, 2010With Ubuntu i used some software which only had an installation procedure or a package for ubuntu. Program's such as Ailerus or Usenet Resource Downloader. What i would like to is this: Since Ubuntu is Debian-based, is it possible that software, intended for Ubuntu, can also be installed under Debian? Or is there a slight difference in structure between debian and ubuntu that makes it almost impossible to add software, intended for Ubuntu, under Debian?
View 14 Replies View RelatedServer :: Redhat Linux Kickstart Installation Procedure
Jan 20, 2010Any one help me to build Redhat Linux 5.3 Server using Kickstart Installation.
View 1 Replies View RelatedOpenSUSE Install :: 11.4 (64bit) - Installation Procedure For Variety Of Software
Jun 18, 2011I'm new to here and to linux, having changed over about 2 weeks ago. I've had a lot of trouble installing a variety of software and am really starting to despair and regret changing over. Right way to go about things for the installation processes of any of the following software on opensuse11.4 64-bit (I have tried everything I can to no avail):
Canon ip2700 series drivers
Creative Sound Blaster X-fi drivers
Skype
iTunes
Installation :: Installing Procedure For NVIDIA Graphics Card In SUSE 10.2?
Dec 11, 2008I took the following path: Yast - Hardware - Graphics Card and Monitor; and it gave me message "the configuration is Framebuffer based and your system does not support changes for resolution and/or color settings". I verified my system's(dual boot system) graphics card using windows OS and it showed NVIDIA Quadro FX 570, but in X11 configuration it shows "Card: VESA Framebuffer Graphics" and the Properties tab is not active.
View 1 Replies View RelatedGeneral :: Procedure To Partition The Drive?
Nov 2, 2010I'm currently running Xubuntu 10.04LTS as my main distro, but would like to also run Fedora 13 on the same machine.Therefore, I'm more so just after a bit of steer of the best plan of attack to achieve this - best procedure to partition the drive (80gb / i686) and install Fedora etc.
View 1 Replies View RelatedGeneral :: Procedure For Moving Fs Content?
Jul 4, 2011What to remember when moving content of a file system to another file system ?Is there some kind of procedure for this operation
View 14 Replies View RelatedGeneral :: Proper Procedure To Log Into Console?
Jul 25, 2011Decided to try to use my console but it didn't work the way I thought it would. What is the proper procedure to log into my console? I've tried to enter data given to me at http://www.zaphu.com/2008/05/30/ubun...-m4a-playback/ It entered the first line of text but not the unwrapped second line. Another line appeared asking my 'neil' login. Tried to enter my password but typed letters wouldn't enter. What do I do?
View 14 Replies View RelatedGeneral :: Proper Procedure For Installing Into / Usr / Local?
Feb 14, 2010I was under the impression that if I have any programs not installed by the package manager, they belong in /usr/local rather than /usr. But if I put the executable in /usr/local/bin, and the jar files into /usr/ local /lib, I get runtime errors about being unable to load the Java classes. So I resorted to putting things in /usr/bin and /usr/lib and it worked fine.Is this something that can only be corrected by compiling differently, or am I missing an installation step?
View 2 Replies View RelatedGeneral :: Procedure For Editing A Startup.sh Script?
Feb 4, 2011What is the procedure for editing a startup.sh script? My doc says to do it but not how exactly.
View 2 Replies View RelatedGeneral :: Procedure For Installing MP3 Player In RHEL5
Jan 12, 2010I am using redhat linux EL5. I am using kernel version 2.6.18-8.el5. In this I want to install mp3 player. I don't know which player is best in redhat. What is the procedure for installing player in redhat. Where I can download RPM Packages.
View 3 Replies View RelatedGeneral :: Need Procedure To Configure Samba On RHEL 4
Jan 25, 2010I need procedure to configure samba on RHEL 4
View 1 Replies View RelatedGeneral :: Procedure To Install Hjsplit In Ubuntu?
Jul 20, 2010I've used this program for years on Windows and would miss it if I could not use it with Ubuntu.For people not knowing abt HjSplit here's a link that gives u a basic idea. Try it . Its an amazingly simple and useful software especially when u download movies from net and they are split in to many parts.It's just one of those programs that is tiny and just works.Using this software a big avi file can be splited in to many parts as well as many avi files can be fused in to one avi file.2 things are required for successful installation in Ubuntu ....A) Kylix Library.B) Hjsplit installation.Please note that a Kylix library needs to be installed on your computer before running HJSplit for Linux.
Downloading & Installing Kylix Library
Download Link : Kylix library
http://www.freebyte.com/linux/libraries/
[code]...
Installation :: Safest Procedure To Install 10.4 On An Existing Lvm2 Without Losing My Files/partitions?
Apr 18, 2010I am planning to install 10.4 when it arrives. And am not going to upgrade because i upgraded from 9.04 to 9.10 so now i need to refresh the system.But I have all my partitions except root using lvm2 logical volumes. My question is : What is the safest procedure to install 10.4 on an existing lvm2 without losing my files/partitions
View 2 Replies View RelatedUbuntu Installation :: Unconventional Partition Setup - Execute All The Rearrangements As Depicted Using The Procedure
Feb 14, 2011The image below is pretty much self-explanatory. PArtition sizes are to scale. The pink swap partition is 2.5 GB for example. Exactly 10 times bigger area is 25 GB. Does anyone know of any possible culprits regarding such a setup? Additional questions:
1. Will such a placment of swap partition screw up boot manager or any part of the booting process on non-dualboot machine?
2. Is it possible to execute all the rearrangements as depicted using the procedure described here? [URL]
General :: Source Code Or The Procedure For Creating Own Shell?
Nov 3, 2010i need the source code to create my own shell in linux or provide atleast procedure for doing it
View 9 Replies View RelatedGeneral :: What Are Steps To And Procedure To Follow For Securing Server?
Apr 15, 2011What are the steps to and Procedure to follow for securing Linux Server???
View 3 Replies View RelatedFedora Installation :: F11 Drivers For ASUS P5L-VM 1394 - Procedure Fails To Recognize The Hard Drives
Aug 10, 2009I would like to install Fedora 11 on an ASUS P5L-VM 1394 motherboard with a 3 GHz Pentium 4 CPU. This is an LGA775 socket mobo with a Intel 945G chipset. Two SATA hard drives are plugged into SATA ports. An IDE DVD drive is plugged into the IDE/ATA port. Using the 32 bit Fedora 11 installation disk, I have seen two cases:
1) No hard drive recognized. When i get to the disk configuration screen, there are no options to choose from.
2) By monkeying around with the BIOS settings or switching the SATA ports the disks are connected to, I can get an alternative mode in which no drivers are found for the DVD drive either.
Currently, a version of Ubuntu is installed. UPDATE: The board was purchased in a P3-PH4C barebones, which for unknown reasons requires a different BIOS issue than the regular P5L-VM 1394. Updating to the most recent BIOS does not resolve the problem. One the installation procedure fails to recognize the hard drives, going into a shell and examining the boot up log shows that the kernel recognized both hard drives. So it's down to why the installation procedure is not recognizing them.
General :: FTP Download ---Procedure And Estimating Dynamic Space Required?
Apr 29, 2011I have just downloaded Slack- 13.37 using Filezilla..I downloaded from an FTP server the entire directory of Slackware - Current (32 Bits) ..There were some problems encountered:1. When I selected the entire folder in FZ , the Queue size was reported as 4 GB.2. I started downloading and after significant time , still the Queue size was reported as around 3.8 GB..I was perplexed as I have a decent bandwidth and it cannot be. To dispel my doubt , I saw the properties of the Slackware directory in which it was downloading. It showed 1.9 GB.. Is the Q size not dynamic? (Total size - Downloaded size)
3. I was on the edge of my seat as my HDD had only roughly about 4 GB ...So , the Q size was kinda misleading..In a haste , I thought I would remove 2 big installations and wiped off Openoffice as anyway I was planning to go in for libre...I moved some other files to a different partition to ensure additional space4. At the end , early in the morning I woke up and saw it had finished ..But there was a failed transfer of 1 hidden file ..There is still 450 MB left in my partition, dont know why it got omitted.5. Now I want to check the integrity of the download bfor burning to a DVD..Should I use md5 sum? I am not able to determine slackware size by googling...In fact I should have gone in for a pre compiled ISO instead of this directory! But it wasnt available yesterday..6. Is there any good download manager like DAP/ Orbit / Leechget which also gives options like turning off comp after download (useful for overnight installs)...The DW helper in Mozilla is not that good ...I want a utility to split the download into 4/5 channels and speed up the download and most importantly show a graphical menu clearly showing Speed, Size, Time left , etc similar to windows DM
General :: Standard Procedure To Install Missing Files In Rhel 5.2?
Dec 19, 2009I am basically very new to linux.. I have rhel 5.2 sever. while the system booting the following error had shown.
touch: can't touch '/var/lib/random-seed ; No such file or directory
chmod; can't access'/var/lib/random-seed ; No such file or directory
touch; can't touch '/var/log/wtmp ; No such file or directory
chgrp; can't access '/var/run/utmp; No such file or directory
[code]....
Ubuntu Installation :: Step By Step Procedure About Installing Free Adobe Flex SDK?
Feb 13, 2011step by step procedure of how to install Free Adobe Flex SDK in Ubuntu 10.04.
View 1 Replies View RelatedUbuntu Installation :: Procedure For Updating From Lucid Beta 2 To Lucid LTS?
Apr 30, 2010What's the procedure for updating from Lucid Beta 2 to Lucid LTS? Is it just "apt-get upgrade"? Or would I be better off with a clean install?
View 2 Replies View RelatedFedora :: What Is The Upgrade Procedure For 13?
Apr 29, 2010just returned to fedora from a stint with xp for development with xp embedded (acutally pretty cool) before i get all cozy with settings and install programs, etc, etc, what is the upgrade procedure for 13? does all of this go for naught, or are settings kept if you upgrade with yum? i hope the answer is what i want it to be!
View 1 Replies View RelatedRed Hat / Fedora :: How To Change Startup Procedure
Mar 29, 2010Have decided to stop using Hylafax and our two serial modems on our server running Clarkconnect 4.1 (RHE4.1)What file will I go to to edit so the program and two devices don't start up?I disconneted the devices and the log file is full of the attempts to get the modems working
View 3 Replies View RelatedDebian :: Procedure Behind Initrd Image?
Feb 14, 2011i am using linux for couple of years. suddenly i a question arises in my mind. Before loading kernel during booting linux box initrd image loads necessary real mount point, file system, modules etc. but how initrd loads them ?? is there predefined modules list stored in initrd image or something else....what is the background procedure of it
View 1 Replies View RelatedSoftware :: Specify A Color To A Gimp Procedure
Jun 19, 2010How do I specify a color to a gimp procedure? e.g. gimp-text-layer-set-color I tried '(255 255 255) for white
View 1 Replies View RelatedUbuntu :: Command Line Procedure?
Mar 7, 2011I'm just figureing out the command line, I am trying to find out how to get to the Internet and browse from the command line, also how can you launch any program you want to use from the command line.thanks for the answers,donald Spauldingexectec@zoho.comI can use the GUI but would like to be faster and better
View 3 Replies View RelatedDebian :: Red Screen Background During Shut Down Procedure?
May 1, 2010I'd tried to run HDD bench mark at my Debian Stable called iozone3. It performed I/O actions which took too long. Ctrl+C to terminate process. Everything went as always. It just terminated. Upon completion of program I used laptop for some more time. During shutting down X-Desktop shut down normally. Terminal window was showing command line with lines <Stopping this and that daemon...> but instead of normal black colour background with white text it changed into red background with white text. What does it mean? Is it safe to restart laptop?
View 2 Replies View Related