I am using redhat linux EL5. I am using kernel version 2.6.18-8.el5. In this I want to install mp3 player. I don't know which player is best in redhat. What is the procedure for installing player in redhat. Where I can download RPM Packages.
View 3 RepliesI was under the impression that if I have any programs not installed by the package manager, they belong in /usr/local rather than /usr. But if I put the executable in /usr/local/bin, and the jar files into /usr/ local /lib, I get runtime errors about being unable to load the Java classes. So I resorted to putting things in /usr/bin and /usr/lib and it worked fine.Is this something that can only be corrected by compiling differently, or am I missing an installation step?
View 2 Replies View RelatedI currently dont have the cd/dvd of RHEL 5. But i need to install gcc. I have been searching all day but wasnt able to find any rpm that is related to RHEL5. I download the following file
gcc-3.0.4.tar.gz
and extracted it, Then i run the following command
[root@WAN-Admin gcc-3.0.4]# ./configure
Configuring for a i686-pc-linux-gnu host.
Created "Makefile" in /root/new/gcc-3.0.4 using "mt-frag"
/tmp/cNf11430/cNf11430.pos: line 7: cc: command not found
*** The command 'cc -o conftest -g conftest.c' failed.
*** You must set the environment variable CC to a working compiler.
Now i am really hanged as what to do now. I added rpmfusion as my yum repo, i searched rpmpbone.net for gcc file for RHEL5 but it seems its not there for this version.
[Code]....
i have a linux mechine, in that i want to install solaris throug xen virtualization. (solaris content is in CD) while i am doing this there is an option "local install media" in installation method it was not highlighting so i can't install this. then what can i do now.
View 1 Replies View RelatedHow to establish a VPN connection,The details I get to connect the VPN are ipaddreess ,username/password How to install WiFi drivers on RHEL5
View 1 Replies View RelatedI have installed vlc player on my system using wine. In the task bar, the volume control is working fine and songs also get played in the vlc player.But i am not getting any voice in my headphones.
Following i am giving the results of few commands, which can help you people in giving me the best decision
lspci
OUTPUT
lsmod | grep snd
output
I'm working on a project using CentOs 5.3 that uses a solid state drive (SSD) as the boot device. It is desired to configure it such that writes do not typically occur run-time but configuration files can be saved. There are 2 reasons we do not want writes to occur run-time. 1) Writes will wear out a SSD over time. 2) A system disruption during a write can cause a file system error.
View 3 Replies View RelatedI took the following path: Yast - Hardware - Graphics Card and Monitor; and it gave me message "the configuration is Framebuffer based and your system does not support changes for resolution and/or color settings". I verified my system's(dual boot system) graphics card using windows OS and it showed NVIDIA Quadro FX 570, but in X11 configuration it shows "Card: VESA Framebuffer Graphics" and the Properties tab is not active.
View 1 Replies View RelatedI recerntly install Fedora 14 with Win 7 on my laptop. I want to install VLC Player on fedora 14. I followed instruction at ;
[URL]
Try to intsall via yum many times but failed.
I tried installing Red Hat linux on my Sata hard disk . As soon as the hardware detection phase starts it generates the error "No hardware detected".roblem? (I have also tested RHLE 5, CentOS 5.4, but none of them detect the hard disk and I can not install anyone).I have installed Windows 7 on one of my disks and I have not any problem with it.I also changed storage configuration in Bios as AHCI, IDE,
My Hardware config is as below:
Mainboard: ASUS P6X58D premium,
CPU: core i7 950,
HDD: two 1 TB WD SATA3
Ram: 6 GB (3*2 GB cruciall[/U][/U][/B]
I have barebones Debian Lenny, with bare bones Gnome Desktop. I'm using IceWeasel for a browser. I have downloaded the file install_flash_player_10_linux.tar.gz. from the Adobe website. I have unpacked (I guess) the file using the command
tar -zxvpf install_flash_player_10_linux.tar.gz
Now according to the instructions at Adobe - Flash Player 10: Installation instructions
It should be unpacked to a directory with an installer that can be run, but all I get is a single file called libflashplayer.so, and I haven't a clue what to do with it. .so is like a .dll file I guess. IceWeasel has a built in service that installs plugins, but this failed with flash.
I have linux linpus lite and I am having trouble installing flash player 10. Once it gets into my downloads I open it and get a message asking me "do you want to install the update patch?" I click ok and it then says "the patch file does not available."
View 12 Replies View RelatedI tried googling how to install Flash player on Debian 5.0, but I end up not being able to..Can anyone give me a link, or show me how to install flash player? thanks
View 14 Replies View Relatedi have recently gotten the Knoppix 6.0, and have installed it on my usb flash drive. finally i can browse the internet again on that laptop, but alas, i can't watch any videos because flash player isnt installed yet. i tried to install it by myself and followed adobe's instructions but i just dont get why it won't install. here are my questions:
1. in the adobe instructions, it is said that i need to unpackage the files. and when i unpackage it, a new directory/folder is supposed to appear. but why does it always unpackage on the desktop? no folders are created when i unpackage it.
2. it is said that i need to navigate to the newly created directory and type a command. how am i supposed to navigate to a non-existent directory, huh? and how do you even navigate to certain directory? i typed help in the terminal (i'm using LXTerminal by the way) to look for a hint but i saw nothing there. so, how do you "navigate" using the terminal?
I really need to install the flash player. I've also tried using the Install components in start > system tools > install components and selected the 'flashplugin-nonfree: Flash support for your browser' but when i clicked install, nothing happens.
I am working with a "Legacy" computer (a Dell Dimension, 125MB RAM, and a Pentium III processer) without a working CD/DVD player.I am trying to install Ubuntu 10.04 Alternative i386 iso (from the hard drive using Unetbootin) using the Command Line installation option.The computer already has Windows XP Professional installed with a working internet connection (Linksys - Wireless - G - USB Network Adapter WUSB54G).
The problem is that during installation I can't get Ubuntu to recognize my WEP internet connection. I am sure I could get Ubuntu to recognize my wireless device/connection if I already had Ubuntu installed, but I can't find anything on how to get it to recognize it during a hard drive installation.Any ideas on how I can get Ubuntu to recognize my WEP internet connection/USB Wireless Adapter during installation?Let me add that I don't understand why it is manditory to have an internet connection during a hard drive installation, but not from a CD installation - it is the same iso isn't it?
I am using openSuse10.3 GNOME. While I am trying to install VLC player I am getting lot of errors like libmpeg2 not found, wxWidgets not found, postproc not found and also some errors like FRIBIDI. For the last two weeks I am trying to install all the versions of VLC player like vlc 0.8.6b, vlc0.9.8a, vlc1.0. But installation was not successful.
View 2 Replies View RelatedI hav successfully installed RHEL5.1 on my system. I downloaded flash player from Adobe website. I chose RPM from the download type. Now, I can find an icon on my GUI for the flash player. When I right-click the icon and click on "Open with software installer", I was able to install flash player. Even the system showed that the software has been installed. But still when I issue the command rpm -qi flash the output says that flash is not installed.
Is there any correct way to install the rpm package. I even tried to install using rpm -ivh <flash player pkg name> even that did'nt work... I have another query... where does the package gets installed when I download RPM's or any other software from the internet.. I want to know the path where the pkgs will be sotred...
i recently installed vlc media player 0.8.6 in yellow dog linux 6.2 on my ps3 by following this procedure..[url]... i then used the firefox add-on mediaplayerconnectivity (0.9.2) to link video files for quick time, real video, flash (flv)etc... to vlc as the default player for these video formats. (note: i had to manually add vlc as the flv default player, b/c mediaplayerconnectivity did not automatically do this.)
now...on videos when i double-click on the little movie film icon to play the streaming file through vcl the player opens, but neither the video or audio play even though i have vlc setup as the default player. i have tried playing some quick time (mov) and windows media video (wmv) streaming video and they work fine. i noticed that there's a new update (0.9.5) for vlc. do i need that update to make sure videos (flv files) video will play? if so, how do i install the 0.9.5 update after downloading it in yellow dog linux 6.2?
I'm on Slackware 13.0. I downloaded the tar file for Adobe flash player (install_flash_player_10_linux.tar.gz) to my /tmp.
But when I invoke "tar -xzvf install_flash_player_10_linux.tar.gz" all I get is a file libflashplayer.so in the same /tmp directory.
I was expecting a folder with the same name and more than the one file in it.
Problem to install any release of gfortran on Red Hat Enterprise Linux Client release 5.6 (Tikanga) Tried searching on the web - no result. Tried "yum install libgfortran" - no result. Tried Installing gcc-gfortran from Fedora's rpm. - got paradoxes like:
[Code]...
step by step procedure of how to install Free Adobe Flex SDK in Ubuntu 10.04.
View 1 Replies View RelatedI installed jre 1.6 in RHEL 5.
its installed successfully.but when i check the version of java by java -version command its shows only 1.4.
anything need to be done to update this?
I am relatively new to the world of linux and PHP. I need to set up my PHP to work with the extension mssql as I have a mssql DB on another server that my websites connects to. I have followed this guide [URL] but get the following error when I run the command isql -v mstest satest satest which is under step 5.
[IM002][unixODBC][Driver Manager]Data source name not found, and no default driver specified
[ISQL]ERROR: Could not SQLConnect
I have my home pc and previously it was dual boot as windows and linux.I want to reinstall rhel5.5(32 bit) but I am not able to do so and getting following error:
Error partitioning
Could not allocate requested partitions:
partitioning failed: could not allocate
[code]...
I'm trying to install a RHEL 6 kernel from src in RHEL 5 I can install the kernel source without any issues, but then I'm having problems installing rpm-build 4.8 I get the following errors:
Code:
Error: authconfig conflicts with nss_ldap
Error: udisks conflicts with kernel
Error: Missing Dependency: python(abi) = 2.4 is needed by package alchemist-1.0.36-2.el5.x86_64 (installed)
[Code]...
installation wine in rhel5 actually i heared that through wine we can install microsoft product in linux .but i dont know whats the requirement for installing this. where can i get wine for rhel 5 kernal=2.6.18-8.e15 and how to install wine and whats the preprocedure before installing this wine.
View 7 Replies View RelatedI'm currently running Xubuntu 10.04LTS as my main distro, but would like to also run Fedora 13 on the same machine.Therefore, I'm more so just after a bit of steer of the best plan of attack to achieve this - best procedure to partition the drive (80gb / i686) and install Fedora etc.
View 1 Replies View RelatedWhat to remember when moving content of a file system to another file system ?Is there some kind of procedure for this operation
View 14 Replies View RelatedDecided to try to use my console but it didn't work the way I thought it would. What is the proper procedure to log into my console? I've tried to enter data given to me at http://www.zaphu.com/2008/05/30/ubun...-m4a-playback/ It entered the first line of text but not the unwrapped second line. Another line appeared asking my 'neil' login. Tried to enter my password but typed letters wouldn't enter. What do I do?
View 14 Replies View RelatedWhat is the procedure for editing a startup.sh script? My doc says to do it but not how exactly.
View 2 Replies View Related