Ubuntu :: Jumper Settings For PATA CD And DVD And And SATA HDD?
Oct 30, 2010
A friend wants to dump his Windows XP system so that I can install Ubuntu 10.04. His PC has a PATA CD R/W drive and a PATA DVD R/W drive on the only single channel. It has a SATA HDD. The PC BIOS will not allow me to change the order of drives to boot from, only shows the CD R/W drive first then the SATA HDD and will only boot from the HDD. I tried getting the PC to boot from the CD or DVD drive so that I could install Ubuntu from a live Ubuntu CD by disconnecting the power to the HDD, This did not work.
With a live Ubuntu flash drive connected the BIOS does not allow me to change the boot order to boot from the flash drive. I was able to boot from a live Ubuntu flash drive by disconnecting the HDD power. I then quickly hot plugged the power to the HDD so that the Ubuntu installation process could use it. But the installation of Ubuntu did not proceed, probably because it was too late to have the HDD recognised. I suspect that the jumper settings on the CD and DVD drive are such that they are unbootable.
View 2 Replies
ADVERTISEMENT
Oct 18, 2010
I have just purchased (AT ENORMOUS EXPENSE) a used 306637-004 36 GB hard drive. It has come, by default, with no jumpers and my scsi controller recognizes it as SCSI device 0.Very inconvenient as it clashes with my existing IBM 9GB drive I am loth to play about with.Does any kind person out there know how to jumper this drive to be SCSI ID 1 or 2 (say).
View 1 Replies
View Related
Apr 18, 2010
I'm currently running Karmic on a old Dell Pentium 4, and I am having trouble copying files to this box from my laptop which is running Linux Mint Helena. I am able to see and connect to the shared directory on the Dell, copy and execute files from there, but cannot write to it. The permissions have been set to 777 on the shared directory and sub directories within that. The older Dell has a PATA hard disk, 300gb, while my newer laptop has a SATA hard disk. I've read that this can be a problem, and permissions may not be recognized? I'm not able to connect to the laptop from the Dell, neither of the administrator logins work, though I maybe need to do this as root?
Here is the smb.conf file I am running on both machines:
I want to be able to write to my server, not just read and execute. I am also not able to write to the server when logged on to a windows machine on the same network.
View 2 Replies
View Related
Sep 3, 2010
I am out of SATA headers on my motherboard. The only way I can free one up is by switching my SATA DVD ROM to a PATA. How much trouble with this create with software that is linked to the DVD ROM? Will openSUSE 11.3 handle this gracefully or will I just be creating problems?
View 2 Replies
View Related
Nov 1, 2010
My IBM IntelliStation M Pro desktop tower has IDE hardware: CD burner and CD player. My computer (which is ~ 6 years old I think) has an unused SATA power plug end and an unused SATA data transfer port so I thought I'd buy a SATA DVD burner/CD burner combo to replace the PATA CD burner. But I read the following line at Wikipedia and wonder exactly what it means:
en.wikipedia.org/wiki/Serial_ATA "Backward and forward compatibility- SATA and PATA At the device level, SATA and PATA (Parallel AT Attachment) devices remain completely incompatible�they cannot be interconnected......" What does that 'interconnected' really mean? Can I have my 2 IDE hard drives and my IDE CD player play nicely with a SATA DVD burner/CD combo burner? [My OS is MEPIS 8.5]
View 8 Replies
View Related
Jul 22, 2011
Anyone know if there is a way of detecting if a hard drive is 3.5/2.5 and ide/sata/pata from within a script?
View 3 Replies
View Related
Sep 29, 2009
On an Asus P5Q motherboard, CentOS 5.3 x64. (Separate thread as the other one has turned into just a discussion on my lm_sensors issue). The motherboard's primary SATA controller is the Intel P45 chipset. 6 ports, set to AHCI in BIOS, and all works a charm. Attached are 6 x SATA drives (2 x OS, 3 x data RAID5, 1 x backup). There is also a Marvell chip that provides PATA and also an underlying SATA chip (2 ports) that can do what Asus call Drive Xpert (stripe or mirror RAID) or be set to just standard SATA ports.
It's a SIL5723 behind what CentOS sees as "03:00.0 IDE interface: Marvell Technology Group Ltd. 88SE6121 SATA II Controller (rev b2)". Physically the Marvell has only a single optical drive attached to its PATA interface. CentOS has loaded marvell_pata (I assume for the PATA side of it) but I have no /dev/cdrom or /dev/dvd so no optical drive CentOS is trying to use 'ahci' for the Marvell's SATA ports. Dmesg tells me that when it 'sees' them as it boots:
scsi6 : ahci
scsi7 : ahci
scsi8 : ahci
ata7: SATA max UDMA/133 abar m1024@0xfeaffc00 port 0xfeaffd00 irq 16
ata8: SATA max UDMA/133 abar m1024@0xfeaffc00 port 0xfeaffd80 irq 16
ata9: DUMMY
It attempts to read SATA drives attached to it, but it just errors trying to access them on boot (e.g. "ata7: failed to recover some devices, retrying in 5 secs" etc). I need the extra SATA ports, and I could really do with having a usable CDROM drive. I found a driver for the Marvell 88SE6121 from Asus. But the latest driver in that is for what it calls "RHEL 50.2" and the script fails with a "Generic Protection Error". That driver looks for kernel "2.6.18-92.el5" in its base_ver variable in the script. Changing the base ver to -128 doesn't help. I have uploaded the driver for if [URL]. Is that modifiable to work on 5.3 / soon to be 5.4?
View 12 Replies
View Related
May 20, 2010
I recognize the obvious need to back up the contents and follow a certain duty of care before attempting to clone my failing pata 250g HD to a 1 tera byte sata. What problems if any could come up when cloning from a failing pata to a sata HD? I'd like to make the switch to sata for many reasons if possible. It is indicated that the HP d530 sff here supports both types.
View 2 Replies
View Related
Feb 2, 2011
openSUSE 11.3, 2.6.34.7-0.7-desktop, KDE 4.4.x, 3.0-P4, 2.5g mem. I replaced PATA-OEM optical drive with SATA-OEM works fine with all apps outside of and except with this widget. No problems until the swap. I have performed some updates and I have not put the PATA drive back in to see if the behavior changed because it was failing. It could be an update but the optical drive swap is my first suspect. This now. If I hover cursor over notifier widget icon "last plugged in device" will pop up with accurate last device until a click on the widget icon and selection of action for the recently plugged in device. Selected actions work fine ... once.
Then it no longer updates the new or retains the previous DVD/CD (or any USB external drive when connected) entry. Closing after viewing but with out selecting an action results in an empty list also. The menu remains empty there after and only removal of the widget and reinstall makes the devices appear again ... once. Then the behavior repeats if the widget is removed and reinstalled. I was wondering if this is likely to be a udev/rules.d problem related to the swap of the optical drives? The 70-persistant-cd.rules file shows two cd's after the swap:
[Code]...
If I delete or rename the 70-persistant-cd.rules file in udev/rules.d will it truly be recreated at boot and might it this fix the issue? Should I look elsewhere first at some var logs for errors? Reinstall 11.3 and let auto detect and config sort it out is also and option but I'd rather not, heh.
View 2 Replies
View Related
May 18, 2010
Is there a tool for Ubuntu that will detect whether I have a SATA or a PATA hard drive interface, even if there's no hard drive inserted?
View 3 Replies
View Related
Oct 20, 2010
I've been, for some years, an happy user of Highpoint HPT374 based RAID cards, using RAID 5 with decent performances (constantly around 90 MB/sec in read, and 60 MB/sec in write ). Old Athlon mobo , with 2.6.8 kernel. Now the mobo is dead, so I've got an Asrock A330GC (dual proc with 4giga ram), installed Debian with kernel 2.6.26 and moved the controller and disks , and the performances have dropped to a painful 9 MB/sec in write, measured with dd of a huge file (interrupted with kill -USR1 [pidof dd]).
Read performances are still around 90MB/sec, using hdparm -t , repeated many times , figures are constantly around 90MB/sec. I suspect some libata issue , in old kernel the raid was seen as hdb, now is sdb, some driver(s) of the PATA disks may be responsible. I've used the driver, from Highpoint v2.19 , the latest driver is broken (causes kernel oops during format of raid), I've informed Highpoint.
Here some info :
hdparm -i /dev/sdb :
HDIO_GET_IDENTITY failed: invalid argument .
lspci :
00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01) .....
View 2 Replies
View Related
Jan 26, 2010
I'm trying to move an existing FC10 install (created by someone else) from a 160GB WD1600AAJS SATA disk to a 160GB WD1600AAJB PATA disk (cursed trend of horizontally mounting SATA connectors at the end of the motherboard means the latest rev mobo doesn't fit in our enclosure!). I've used DD to copy the disk image from one to the other, but when attempting to boot, I get the following error:
Code:
Unable to access resume device (UUID=946f216f-0c24-4b02-a996-f42059970de7)
mount: error mounting /dev/root on /sysroot as ext3: no such file or directory
That particular UUID maps to sda2, which is the swap partition. Interestingly, both the SATA and PATA disk come up as /dev/sda on the motherboard. I kind of grok that the UUIDs are substitutes for directly naming the disks, and that they're referred to in fstab, initrd-2.6.27.12-170.2.5.fc10.i686.img, and in /dev/disk/by-* I'm guessing the problem is that the GUIDs (at least the one for swap) are no longer the same. How are they assigned to the partitions during boot?
I tried doing
Code:
swapoff -a
mkswap /dev/sda2
swapon -a
and put that new GUID in fstab and into initrd-* (using some steps I found elsewhere on how to gunzip/rezip it).At that point, I get a kernel panic on boot
Code:
Kernel panic - not syncing: CFS: Unable to mount root fs on unknown-block(0,0)
So I'm guessing that the other UUUDs have changed as well and I need to update them. How would I figure out what they are? I suppose I could change the references to /dev/sda*, but I didn't build this original image and I'm thinking whoever did had a good reason to go with UUIDs.
View 10 Replies
View Related
Jul 4, 2010
My friend bought an old hard drive. He noticed something with the hard drive that it was just replaced with a SATA socket. So meaning, the SATA socket was soldered to the PATA hard disk to replace the PATA socket to SATA socket to make it a SATA.
Now the question is:
1. Does the Transfer Rate of the harddisk (that has been replaced from PATA socket to SATA socket) would be SATA transfer rate? OR would still be PATA transfer rate?
View 4 Replies
View Related
Aug 13, 2010
Can SATA 3 (SATA III) Hard disk be run on motherboard which only supports SATA II, except sacrificing the speed (throughput)?
View 2 Replies
View Related
May 1, 2011
I keep getting this error in my log viewer every 2 seconds: Code: ata4: limiting SATA link speed to 1.5 Gbps I have a dual boot SSD and I have run many SMART tests in windows and linux, (using smartmon tools and the disk utility) and the reports are all 100% healthy..... My research shows that this error represents one of the following:
1. Problem with SATA controller
2. Changing BIOS to allow SATA
3. Changing SATA mode to PATA or AHCI
4. Replacing the SATA cable
5. Allowing the SSD to run at SATA II speeds, i.e. 3 Gbps
- Does anyone know how to try number 5, i.e. allowing the SSD to run at SATA II speeds? I am lost here and this problem has caused my machine to crash twice when watching a movie in linux/ ubuntu. (It is worth noting that the crashes have only occurred in linux and I have never had an issue in windows, so it does seem to be a linux setting somewhere, hence why I think it is a "allowing SATA II to run at correct speeds issue")
View 4 Replies
View Related
Jun 21, 2010
I installed Ubuntu 10.04, and happened to have an Silicom Images PCXpress card plugged in, and it kindly added the sil_sata module.This is fine for this chip set.I think that my earlier installation of Ubuntu 9.04 used Libata, which does support NCQ and also has good legacy support for the Intel Intel ICH7 chipset I have inside my Sony Vaio SZ notebook. Also, libata also support Silicon Image chipsets as far as I can tell from URL...I wish to remove the Silicom Images SATA modules and replace this with libata and then test the performance between the two device drivers.
View 5 Replies
View Related
Jun 1, 2010
My motherboard supports SATA but I do not know which version: SATA-I or SATA-II. I want to buy a SSD so it would be pointless to buy a fast SSD if my motherboard only suports SATA-I
View 7 Replies
View Related
Sep 1, 2011
I have 3 SATA drives and 1 PATA drive. If I run fdisk -l,
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors
Units = sectors of 1 * 512 = 512 bytes
[code]....
View 2 Replies
View Related
Mar 30, 2011
I Have 10.04 LTS I want to make a more secure storage with 3 PATA 300GB disks. I think a raid5 is the best. I don't need to boot or have a system on the storage volumes.i have find some guides, but they are for raid on system-disk and make them bootable, and seems to be to complicated for me.
I have made ext4 volumes on them and flaged them as raid in gparted.
View 4 Replies
View Related
Aug 24, 2010
I have an Intel MB (855GME with 6300ESB) that I'm having trouble installing Ubuntu 9.0.4 on. It will install to a SATA drive but for various reasons I need to install on IDE (PATA on 6300ESB). The install fails to find any ide drive (I know the drive/interface works because I can install XP on this same ide drive). If I boot Ubuntu from the DVD (on USB) and open a terminal window and parse the dmesg output I see the message "pata_acpi :xxx device not available because of BAR 2 collisions". I'm trying to determine if there's some workaround for this. I've tried various kernel parameters and no joy.
View 7 Replies
View Related
May 28, 2011
ubuntu 8.04 server can not detect seagate sata hard drive 2tb or sata Lg dvdrw x22 sata drive .is it possible to install it without buying a pci ide sata card?is it possible to get a driver for sata driver and sata drive that can be recognise by ubunto 8.04 server ?or to get the files for 1.44 floppy diskdoes the late edition of unbutu recognise sate hdd and sata cdrw drive automaticly during the installation of the unbutu?
View 1 Replies
View Related
Jan 31, 2010
Did you play too much with compiz and after-a-while you realize that certain functions are not working anymore?
Well, just follow the steps below:
Quote:
gconftool-2 --recursive-unset /apps/compiz
Then,
Quote:
Restart your PC / lappy
[URL]
View 4 Replies
View Related
Aug 21, 2011
i have a computer with 3 users on it, and a folder using samba that everyone on the network has access to. Lets say that, the folder is stored in /etc/sharedfolder. What happens is, when user1 puts a folder in it, then logs off, user 2 attempts to modify it and fails, because permission is set to 755, and they are not in the same group. (even if they were, it should still need to be 775) Anyway, my current solution is, every 5 minutes a crontab changes permission like so: chmod 777 -R /etc/sharedfiles && chown useradmin:superadmin -R /etc/sharedfiles Which works, but seeing as there is getting close to a gig in there, this is a bad solution, as it eats up the computers resources. Solutions that i think might work:
1) create a script that only changes permissions that need be changed.
2) change file permission settings to force all documents to inherit parent document settings
View 9 Replies
View Related
Aug 21, 2010
I am using Fedora 13 x86_64 on a Acer Aspire 7730ZG laptop with: 01:00.0 VGA compatible controller: nVidia Corporation G98 [GeForce 9300M GS] (rev a1) I have kmod-nvidia-2.6.33.6-147.2.4.fc13.x86_64-195.36.31-1.fc13.2.x86_64 installed from rpmfuison when I plug in the hdmi cable to the tv, my tv says the resoultion is at 720p, and I can not get any of the resolutions settings to look right on seperate x screen with the nvidia X server settings gui. my tv is a vizo 42inch. also another question is their a way to set the video card to output at 1080? this might be part of my problem?
View 14 Replies
View Related
Sep 28, 2010
I have a triboot windows suse 11.3 stable and suse 11.3 factory pc, I would like to share the browsers and email settings between the suse stable and factory, I succeed with thunderbird and firefox moving the /home/.thunderbird and /home/.mozilla in an ext3 shared partition and linking these in the respecive /homes, I found that there isn't a /home/.chromium folder, I found probably /usr/lib64/chromium could be the same as /home/.mozilla for firefox, but I don't know if is secure or can damage my system to move this in a ext3 partition and then link this to the respective /usr/lib64/chromium, /usr/lib64/chromium has root owner, root group, visible and modifiable for root and only visible for group and other.
View 5 Replies
View Related
Apr 1, 2011
Is there a way I can save system settings and have yast revert to a config file in case I ever need to reinstall the system again? I hate having to configure the firewall, runlevels, samba shares, samba workgroup, apparmor, and all the other junk after every install. It's not like I install often, but should suse 11.5 or 12 roll out, I'd like it to be a snappy upgrade.
View 6 Replies
View Related
Oct 18, 2009
I am running a debian squeeze machine on a ibm t40 laptop with window maker as my window manager. I am using gpointing-device-settings as a program to get the scroll bar on my touch pad working. unfortunately, I can't get the settings to stick after i shutdown and turn on. I have to go into the program and unclick then reclick the button. i'm using version 1.3.2 (ive tried both deb and source versions). does anyone have any ideas on how to fix this? and if there is any configure files that I could configure instead of having to use the gui program.
View 4 Replies
View Related
Jul 22, 2011
I had to replace the "broken" SSD and fitted "Run Core Prov IV Pata". This apparently installed correctly. I then created a live pendrive using Pendrive linux.com and loaded Ubuntu 11.04 onto the SSD.OK so far. Linux appeared and various tests worked.Restarted the netbook, without the pendrive and got the message: "NTLDR is missing Press Ctrl+Alt+Del to restart" The pendrive formatting is FAT32 not NTFS.
I do not understand why there is any reference to NTLDR. Does Linux need it? Can something have happened to the BIOS which used to be OK?
View 1 Replies
View Related
Aug 12, 2010
I'm trying to create a user account for my children in Ubuntu 10.04
When creating their account, I have turned off the 'Connect to ethernet and wireless' option of the Advanced Settings.
However, when I log into their accounts, they still have full access to the internet through both the wireless and ethernet connections. Is this option for some other purpose?
Is there an alternate way to limit internet access for childrens' accounts in Ubuntu? (I'm used to MS Family Safety as a filter for internet access - is there an eqivalent for Ubuntu?)
View 2 Replies
View Related
Apr 25, 2011
I have this SATA drive, which I want to connect to my usb drive. Its installed with Ubuntu 10.04. I want to connect it to my laptop using a "SATA to USB connector" and then boot linux. So before I buy this connector/adaptor, can I know if it can be booted from USB?
Note: My laptop is loaded with Windows7.
View 3 Replies
View Related
