General :: Error While Getting Interface Flags No Such Device

Jun 28, 2011

While using wifi slax every gos ok until i get wlan0 error while getting interface flags no such device how can i fix this.

View 1 Replies


ADVERTISEMENT

Ubuntu :: ERROR While Getting Interface Flags - No Such Device

Mar 26, 2011

i am trying to connect my AWUS036H to my Compaq CQ60 laptop running Ubuntu 10.10. when i check ifconfig, one minute my wlan1 is there, next minute its not, if i try to do a sudo ifconfig wlan1 up i get, wlan1: ERROR while getting interface flags: No such device and when i try it again it accepts the command no probs, i suspect this is because the device is in and out every few seconds. when i checked rfkill, i found a hard block which i resolved with unblock all, i have checked the unit under windows and it works just fine so i suspect it is a problem with my ubuntu

View 2 Replies View Related

Ubuntu Networking :: ERROR While Getting Interface Flags: No Such Device

Apr 9, 2010

I am having an odd problem with a program I'm trying to run which is supposed to connect to a network. The messages printed when I start up the program are:

SIOCSIFNETMASK: No such device
192.168.11.50: ERROR while getting interface flags: No such device
SIOCADDRT: File exists

One reason this is particularly odd is that the network itself appears to be working fine, otherwise. I can connect to the internet on my computer and everything, but the program is not able to connect to it, for whatever reason. I've tried tinkering with the settings but nothing worked.

View 3 Replies View Related

Ubuntu Networking :: ERROR While Getting Interface Flags: No Such Device (tried The Ra0 As Well)

Mar 29, 2011

I wanted to stop hi jacking the work around thread. I'm running Kubuntu 64 bit I started by following this walk through[URL].. everything is fine until i get to Step 5 this line :

sudo ifconfig wlan0 down (on some hardware it is ra0)I receive this output: wlan0: ERROR while getting interface flags: No such device I started browsing other threads to see what else could be happening. I ran this line : sudo lshw -C network

with an output of:
*-network:0 UNCLAIMED
description: Network controller
product: RaLink
vendor: RaLink
physical id: 0
bus info: pci@0000:06:00.0
version: 00
width: 32 bits

[Code]...

View 9 Replies View Related

Ubuntu Networking :: Eth3: ERROR While Getting Interface Flags: No Such Device

Jun 14, 2010

yesterday without reason my eth0 dissappeared. I read through various threads, tried couple of things, and now its s back as eth3. If I bring up the network on the console it says [OK], but I cant ping my router or access any website.

BTW: During the proccess I removed network-manager-kde, which I regret now (cause I cant install it again w/o network). Even so my network was configured manually, it would be good to have it now for testing connections. The machine also got no CDROM-drive, I installed via USB.

EDIT: I booted up again, and now eth3 is gone again I get the former error message when I restart the network: "eth3: ERROR while getting interface flags: No such device"Same with all other ethX. As far as I can see w/ my basic knowledge, the realtek adapter is present and working. ifconfig only shows me "lo" nothing else.

View 9 Replies View Related

Ubuntu Servers :: Bond1: ERROR While Getting Interface Flags: No Such Device

Oct 14, 2010

On Ubuntu Server 10.10 the second bond device won't come up. Someone please advise the correct configuration. Error message when I run /etc/init.d/networking restart:

Code:
SIOCSIFADDR: No such device
bond1: ERROR while getting interface flags: No such device
SIOCSIFNETMASK: No such device
SIOCSIFBRDADDR: No such device
bond1: ERROR while getting interface flags: No such device
bond1: ERROR while getting interface flags: No such device
Failed to bring up bond1.

[code]...

View 5 Replies View Related

Networking :: Location Of Standard Interface Flags On SUSE

Jun 15, 2010

I am reporting various network statistics in a c++ program by reading the values out of /proc. However, I am having trouble determining the link status. In particular, I am wondering:

1. How are the standard interface flags (IFF_UP, IFF_RUNNING) as referenced in if.h accessed from user land? The ifconfig man page lists its files as

/proc/net/socket (doesn't exist in suse), /proc/net/dev, and /proc/net/if_inet6. None of these seem to contain these flags.

2. ip link show reports a "NO-CARRIER" flag. How does this correlate with the "UP" and/or "RUNNING" flags as reported by ifconfig, and how is it accessed from user space?

View 1 Replies View Related

CentOS 5 Hardware :: Eth0: Error Fetching Interface Information: Device Not Found?

Nov 15, 2009

I have 2 network cards eth0 and eth1, for eth0 i set a manual MACADDR in network scripts. Ok so every time i boot, if the cable is plugged in, my eth0 fails to mount or i don't know.. i get this after bood when i type ifoncifg eth0 (eth0: error fetching interface information:Device not found). So i have to unplug the cable when i boot, then plug it in and do a service network restart.

View 5 Replies View Related

Ubuntu :: Eth0 Doesn't Exists For Firestarter - Eth0: Error Fetching Interface Information: Device Not Found

May 5, 2010

My network name is eth2 it was changed by some reason and now i got these errors... i installed, reinstalled, re re installed, tried to run the asistant but no luck :/

Code:

* Stopping the Firestarter firewall...
eth0: error fetching interface information: Device not found
eth0: error fetching interface information: Device not found
eth0: error fetching interface information: Device not found

[code]....

View 1 Replies View Related

General :: Detect FireWire Interface And Connected Device On It, In Ubuntu 11.04?

Sep 6, 2011

I have a FireWire camera LifeSize connected to my PC in the FireWire interface. My PC has miniPCI slot and with external converter its having a FireWire interface. Now its Ubuntu who is not showing me anything at all when i try:

$ uname -a
Linux desktop 2.6.38-11-generic-pae #48-Ubuntu SMP Fri Jul 29 20:51:21 UTC 2011 i686 i686 i386 GNU/Linux

[code]....

View 1 Replies View Related

General :: Usb Driver : Ti_usb_3410_5052 - After Adding My Device (MSP430 USB-DEBUG-INTERFACE) It Doesn't Work?

Feb 3, 2011

I have problems with my USB driver. After adding my device (MSP430 USB-DEBUG-INTERFACE) it doesn't work.

[ 60.476039] usb 2-2.1: new full speed USB device using uhci_hcd and address 8
[ 60.693959] ti_usb_3410_5052 2-2.1:1.0: TI USB 3410 1 port adapter converter detected
[ 60.693981] ti_usb_3410_5052: probe of 2-2.1:1.0 failed with error -5


I try to do: modprobe ti_usb_3410_5052.No changes.It's Linux

Linux ubuntu 2.6.35-25-generic #44-Ubuntu SMP Fri Jan 21 17:40:44 UTC 2011 x86_64 GNU/Linux

View 1 Replies View Related

Debian :: Configure: Error: Cannot Find The Flags To Link With Boost Date_time

Feb 17, 2011

I'm trying to cross compile something and it requires a recent version of Boost. I'm using squeeze and gnome and my updates are all up to date. I could not get through the 'configure' stage with Boost dev packages from the debian repository, so I went to the Boost web site. I thought the package requires boost 1.44 or later, so I downloaded 1.45.0 from the site and proceeded to build and install it. I think I installed it right, using /usr/local/ as the prefix. Back at my main project, I try to configure my build and I get some of the following text and then the configure stops.

Code:

checking for Boost's header version... 1_45
checking for the toolset name used by Boost for arm-none-linux-gnueabi-g++... configure: WARNING: could not figure out which toolset name to use for arm-none-linux-gnueabi-g++
checking boost/date_time/posix_time/posix_time.hpp usability... yes

[code]....

I cannot get past the 'date_time' thing. Does anyone know what is meant by 'flags to link with Boost date_time' ?

View 2 Replies View Related

CentOS 5 Networking :: Kernel Rpm Install After Error "Bringing Up Interface Eth0: Device Eth0 Has Different MAC Address Than Expected, Ignoring"

Dec 26, 2010

i install kernel rpm after i boot that kernel network not working kernel name : kernel-rt-trace-2.6.24.7-132.el5.centos.i686 [URL] error "Bringing up interface eth0: Device eth0 has different MAC address than expected, ignoring."

View 1 Replies View Related

General :: Can't Find Boot Device - Error "Unable To Determine Major/minor Number Of Root Device"

Mar 17, 2011

I just compiled my first own kernel (I'm using Arch Linux), following the tutorial on the german site. Now I tried to boot it, I ended up failing with this message: Code: Waiting 10 seconds for device /dev/sda1 ... Root device '/dev/sda1' doesn't exist, Attempting to create it. ERROR: Unable to determine major/minor number of root device '/dev/sda1' Here is the important part of my menu.lst:

[Code]....

I simply copy&pasted the Arch-entry, i.e. I also had the disk by uuid there. The failure message was the same, just the root device name was the different name Also, at first I did not have the initrd line in my menu.lst (as written in my tutorial that I may not need it). In this case I had this error message:

[Code]....

View 10 Replies View Related

General :: Ifconfig Return "unknown Interface: No Such Device"

May 9, 2010

I'm trying to install a Linux driver for my wireless network card (D-Link DWL-G510) on my Red Hat Linux 7.1 machine with a 2.4.37.9 kernel. I downloaded the serial monkey driver from the sourceforge site and was able to successfully compile the rt73 module and load it into the kernel. The problem now is that everytime I issue the command ifconfig wlan0 up it keeps returning with the following error message: wlan0: unknown interface: No such device.

I'm at a loss as to what to do here. I specifed wlan0 as the alias for the rt73 module in the modules.conf and also tried to load the driver with the command modprobe rt73 ifname=wlan0 (this specifies the interface name according to the instructions packaged in the driver), but the error message still keeps coming up.

Is there something else I need to do in Linux to configure the wlan0 part or is the module not recognizing the wireless network card? It would be quite strange if it is the later since all information from the Internet is indicating this is the linux driver I should be using for mentioned wireless card.

View 1 Replies View Related

General :: List Of All UNIX Flags ?

Jun 29, 2011

I have beeen trying to find a list of all flags that can be used in UNIX and their meaning but I have had no luck.

Does anyone know if such a list exists?

If so where can I find it?

View 10 Replies View Related

General :: Skins2 Interface Error: Cannot Instanciate Qt4 Dialogs Provider

Feb 11, 2011

I getting a error when i try to run VLC on my rhel5 box

VLC media player 1.1.7 The Luggage (revision exported)
LibVLC has detected an unusable buggy GNU/libc version.
Please update to version 2.8 or newer.\

[code].....

View 1 Replies View Related

General :: Automatically Append Flags To Certain Commands?

Feb 12, 2011

Greetings, I want to automatically append flags to certain commands. For example, when I type:

ls

at the prompt, I want the

-la

flags automatically appended without me having to type:

ls -la

View 2 Replies View Related

General :: Can Both EXT4_FEATURE_INCOMPAT_META_BG And EXT4_FEATURE_INCOMPAT_FLEX_BG Flags Turn On The Same Time

Mar 16, 2010

Can both EXT4_FEATURE_INCOMPAT_META_BG and EXT4_FEATURE_INCOMPAT_FLEX_BG flags turn on the same time? If yes, I am wondering whether there is a correlation between the numbers of block groups in META group and FLEX group. Where are backups of superblock and group description table (GDT) stored in this case?

View 1 Replies View Related

Server :: Lifekeeper Error - DEVICE FAILURE On SCSI Device - /dev/add

Sep 17, 2009

Since May 12,2009. Our system lifekeeper has the error log "lifekeeper error: DEVICE FAILURE on SCSI device '/dev/add'", but it ran normally. Until last week, it failover to the standby server. The disk still running, the error still come out.

View 3 Replies View Related

General :: Unable To Use GUI Interface Meant Graphics Interface?

Apr 11, 2011

i am using windows 7 in my laptop and linux is installed on virtualBox but my problem is the screen is showing small in virtualbox is there any way to enalarge the screen to show like windows screen? i did before by using VGA setting but it made problem me i was not able to use GUI interface i meant graphics interface
it was just showing me Command Prompt.

View 8 Replies View Related

Ubuntu :: VLC Not Starting - Main Interface Error: Socket Bind Error (Permission Denied)

Oct 17, 2010

I tried removing it and installing again but I still get the same code in the terminal:

[Code]....

View 3 Replies View Related

General :: Mount Error 6 = No Such Device Or Address

Feb 10, 2011

[root@servers guest]# /bin/mount -o -uid=root,gid=root,username=userid,password=user1passwd //172.16.1.212/backup/user1backup /mnt/tmp

retrying with upper case share name
mount error 6 = No such device or address
Refer to the mount.cifs(8) manual page (e.g.man mount.cifs)
[root@servers guest]#

I also tried:

[root@servers guest]# /bin/mount -t cifs -o -uid=root,gid=root,username=user1,password=user1pass //172.16.1.212/backup/user1backup /mnt/tmp

but no luck!

View 4 Replies View Related

Server :: User Interface Error 3082462856:error:0906906F:PEM Routines:PEM_ASN1_write_bio:read Keyem_lib.c:382?

Oct 14, 2010

OpenSUSE 11.3, openssl was just updated with YAST (to see if there is any fix available but not)

# openssl version
OpenSSL 1.0.0 29 Mar 2010
# openssl -genrsa -des3 -out ca.key 4096

[code]....

View 2 Replies View Related

General :: Error Message: Device Eth0 Does Not Seem To Be Present

Jan 14, 2010

solve this error "3c501 device eth0 does not seem to be present, delaying initialization".

View 3 Replies View Related

General :: Edac Error - Device Not Found (E7xxx)

Jan 14, 2011

Hey, im new to linux but i like it very much. recently built decent computer and put Mint 10 on it. every thing works fine but get a strange message after I install the driver for nvidia video card. Message is an edac error "device not found" E7xxx.? Not sure of any of it. System still works fine. Graphics are working great. Also the linux mint boot screen changed to some generic looking screen that says Linux Mint 10 in an old dot matrix type format.

Here's what I have:
Tyan i7501 s2735
(2) 2.4 Xeon cpu's
320 gb seagate hd
2gb ram
8400 GS Geforce 512mb video card

View 10 Replies View Related

General :: Error When Trying To Run Airodump (i0ctlsiocgifindex) Failed No Such Device

Feb 25, 2011

I just installed bt4 on vmware....internet is up and running and when i try to run airodump i get the error stated above. I installed ndis wrapper it would resolve my issue but it did not fix it.

View 4 Replies View Related

General :: Une Erreur Est Survenue INTERNAL ERROR: Unknown Device Hdc

Nov 22, 2010

i try to install mandriva on my computer bu after the licence i gat this error message. une erreur est survenue INTERNAL ERROR: unknown device hdc

MDK::Common::Various::intenal_error()called from /urs/lib/libDrakx/devices.pm.186
Devices::entry()called from /urs/lib/libDrakx/devices.pm.201
Devices::make()called from /urs/lib/libDrakx/fsedit.pm.166

View 1 Replies View Related

General :: Error Opening/initializing The Selected Video_out (vo) Device

Nov 3, 2010

while opening any video with gmplayer it gives the fatal Error opening/initializing the selected video_out (vo) device. while playing with mplayer it doesnot goto full screen video output mode while pressing F.

View 13 Replies View Related

General :: Ibv4l2: Error Turning On Stream: No Space Left On Device

Jan 4, 2011

ibv4l2: error turning on stream: No space left on device

Webcam work in:
fps: 1/30
formate:JPEG/WMV

it works not perfect on guvcview

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved