i am running fedora core 13 and have some probs with fast-track / metasploit when i use fasttrack and metasploit starts i get this
Code:
msf > db_driver sqlite3
[-] Unknown command: db_driver.
msf > db_destroy pentest
[-] Unknown command: db_destroy.
[acode]...
fasttrack is installt corectly and installt metasploit with the rpm packige,
I saw 2 users asking the same question, but no one has answered that post...
I am posting this because it is also happening to me.
I've installed (through Wubi) Ubuntu 10.04, after rebooting, I've got this error, waiting a couple seconds, Ubuntu started normally. This message now repeats whenever I start Ubuntu.
Error: unknown command, keystatus
I always get this message when I boot to Ubuntu. How can I get rid of this message and fix this issue.
I've just carried out an update and when I rebooted it won't let me passed the choose screen with Windows 7 or Ubuntu on it, I choose the Ubuntu and Error: unknown command - load font flashes for a second and then the machine reboots!I can't get any further into Ubuntu than that, any one have any ideas of how I can get back in????
View 2 Replies View RelatedI'm running Debian testing and after a recent software update, suddenly I can no longer boot into my single Linux kernel image anymore. I did look at the software update before I did it and I don't believe that it removed any software packages. When I try to boot into my linux 2.6.26-1-amd64 image, I get the following message from grub:"error: unknown command `initrd'"..The same error appears if I try to boot into single-user mode. I have a Windows XP partition on the same hard disk and I am still able to boot into that from grub. I've searched the net and haven't really found my same problem replicated anywhere. I would imagine that the problem is just that somehow the initrd package got removed in my last software update, but again I don't recall seeing any software that the update planned to remove.
Any thoughts on how I would go about fixing this problem? Since I'm unable to get into Linux at all, I imagine I'll have to use a LiveCD to get in and fix the problem, but I don't know where to begin looking.
I know I screwed up something. I was using Ubuntu 10 minutes ago without a hitch. Then I tried reducing the time I needed to select something in GRUB. So basically, I found this command:
[Code]...
I got it when I tried reducing the GRUB_TIMEOUT from the code above. I feel so furious now because I knew it was a bad idea to fix something that isn't broke. Can my Wubi install still be saved?
I didn't like the white on black grub menu, found it hard to read. so modified the /etc/grub.d/05_debian_theme
Code:
set menu_color_normal=white/black
set menu_color_highlight=black/light-grey
(This is where the silly old fart comes in, I didn't comment out the original lines, I just deleted the black/white, black /light-grey and reversed them.)then I updated grub, rebooted, and got this message from grub.
Quote:
error Invalid mode 1280X1024
error unknown command "terminal"
warning Invalid background color "light-grey"
Maybe a while ago I did play with the resolution for some reason or other. But I did a
Code:
vbeinfo
and 1280X1024 came up as OK. No idea about the "terminal" thing. Maybe "light-grey" should be "light_grey" look at their /etc/grub.d/05_debian_theme and post the below lines
Code:
cat << EOF
set menu_color_normal=white/black
set menu_color_highlight=black/light-grey
[code].....
I recently started using a backtrack tool know as metsploit console on my fedora o.s,i just wanted to clarify two this ,first of all can you update metasploit 3.3 to 3.4 using yum command?(file place in /usr/bin/msfgui) secondly i wanted to know whether metasploit is applicable only under a lan network?
View 3 Replies View Relatedi am using fedora12,i have downloaded the metasploit framework and it is in tar.bz2 form,i wanted to know how i could install it in fedora? i tryed it in windows ,worked smoothly since it was in .exe form! bt here in fedora i am not sure on how i could install it!
View 9 Replies View RelatedI've recently read that giFT is dead. Now, this was the only way I knew of to connect to the Ares and FastTrack networks from Ubuntu, and since those networks are still alive and well, I'd like to know if there are some other ways to do so.
Now, before anyone mentions them: I already know about Gnutella and Soulseek. I haven't had any luck with the music I'm looking for on either of those networks - though I know it can be readily found on Ares, and I haven't tried FastTrack. So that is what I'm looking for, not some alternative network.
correctly install Metasploit on
Code:
Red Hat Enterprise Linux Server release 5 Tikanga
I have updated my ruby version to :
Code:
ruby 1.9.1p243 (2009-07-16 revision 24175) i686-linux
Now that all the Ruby errors that i had before disappeared
when i run the msfconsole it just hang there!
I installed Kubuntu 10.04 last couple days ago. Yesterday I installed some package software. After reboot, I had problem to login in GUI in Kubuntu. I tried few solutions in web I found,
Now It became more worse ! After BIOS - show this error message
error : unknown filesystem
grub rescue>
I have dual boot with Ubuntu 9.10 and Windows 7. Today, after using Partition Wizard on Windows to resize its partition, I got the following message when reboot:
Code:
I dont actually know what to do, I've been reading some threads on the internet but nothing equal to my case, only people who installed Windows after Linux and lost GRUB. Do I just need a live CD to reinstall GRUB? Can somebody tell what to do?
I have windows vista. i tried installed linux-ubuntu 9.10 but not knowing after a point on how to proceed further, i quit half-way. so my partition (14 gb)remained wasted. i tried installing again in a new partition and got it done. from my newly installed lunux, i tried to delete that 14gb partition. and now when i restart my laptop, i get this error :
GRUB loading.
error: unknown filesystem
grub rescue>
I would like to know what exactly has happened and how do i get this resolved.
I have a pc that was running with the latest version of ubuntu and i wanted to install just vista for somereasons.
And what i did is to format the main driver and try to boot it from vista CD and as you may guess i have an error that says: unknown file system grub rescue
Each time i start the pc. I have an ubuntu live cd and also the vista cd, so what should i do now? the vista cd dosnt boot and the same screen appears all the time.
I want to ask about Kmail. I have Kmail from Mandriva. I use Kmail for My Email. And When I reply Message, I found some trouble.
Sending failed:
Unknown error code 50. The message content was not accepted.
The server responded: "5.7.1 Message refused by BannedWord check. This email has been rejected. The email message was detected as spam." Please send a full bug report at [URL]. The message will stay in the 'outbox' folder until you either fix the problem (e.g. a broken address) or remove the message from the 'outbox' folder. This transport protocol was used: smtp.net
How to solve this email error I get when I try to send email via KMail.
i try to install mandriva on my computer bu after the licence i gat this error message. une erreur est survenue INTERNAL ERROR: unknown device hdc
MDK::Common::Various::intenal_error()called from /urs/lib/libDrakx/devices.pm.186
Devices::entry()called from /urs/lib/libDrakx/devices.pm.201
Devices::make()called from /urs/lib/libDrakx/fsedit.pm.166
I just installed ubuntu on my computer that already had windows 7 on it so I could dual boot them. After installing ubuntu and playing around on it a little I went back onto windows. I then restarted my computer and now it won't startup. I get an error that says unknown filetype grub rescue<. I don't know what to do to get back into windows or ubuntu.
View 4 Replies View RelatedYesterday I installed the latest version of ubuntu to my computer that was already running windows 7. I had everything working fine until in windows I deleted a partition that had nothing in it.
After this I restarted but I can't get into either OS. I get an error that says Error: unknown filesystem grub rescue>
I think I need to fix something in grub. I have been booting off of a usb stick with linux on it in the mean time.
Yesterday I installed the latest version of ubuntu to my computer that was already running windows 7. I had everything working fine until in windows I deleted a partition that had nothing in it. After this I restarted but I can't get into either OS.
I get an error that says Error: unknown filesystem grub rescue>
If I could I would change the boot order but I can't do that (I have a Dell Studio 1747). I try F2 to enter the BIOS set up, but I still end up with that error and never get to the setup. F12 doesn't work either (F12 is for the boot order) so I can't boot from the DVD with the Win7 installation DVD as the computer just freezes and I can't get past the Dell splash screen.
I have tried to remove the coin battery on the motherboard in an attempt to reset the BIOS but that didn't work either.
So...
F2 = error
F12 = freeze
Reset bios by removing coin size battery = no change
I assume there is no use reformatting the HD by attaching it to another computer and re-install Win7. Is it a motherboard problem?
I downloaded the ubuntu-9.10-desktop-i386.iso file from the website, extracted it, and ran the Wbiu.exe file - it prompted to get my info and then restart. Upon restarting, I then had the choice to run Windows or Ubuntu, and I've been running Ubuntu ever since.
I ran into some speed-bumps. Upon entering the Ubuntu option at my start-up prompt, I go to another prompt asking me to choose from: Ubuntu, linux 2.6.31-20 Generic Ubuntu, linux 2.6.31.20 Recovery mode Ubuntu, linux 2.6.31-14 Generic Ubuntu, linux 2.6.31-14 Recovery mode Windows 7 installer Windows Vista installer
I've been choosing the very first one, the 31-20 generic, but just this morning after downloading some programs from the Synaptic and transferring a few Gbs of music, I received this error prompt: Code: [2.879604] Kernel panic -- not syncing: VFS : Unable to mount roof fs on unknown--block (8,2) After that, I've been running the 2.6.31-14 generic installer. I have no idea what any of this means and I've spent time crawling through threads trying to figure it out. I mean, it still WORKS but I just help but think I've done something very wrong. ALERT: SUDO PASSWORD QUESTION
I hope the cautionary sign above has dispelled any annoyed gurus who have answered this question dozens of times before. I've crawled through my fair share of threads concerning this, the best corollary being the following: forum/linux-newbie/157773-solved-sudo-password-errors-usb-internet-issues.html; which, strangely enough, was never really solved. Like the user in that thread, when I access the terminal and type in a command, the next line invariably states "[sudo] password for jacob' -- when I hit enter and type in the long list of possibilities I've read (read: sudo, su, su root, su passwd, sudo passwd, sudo root, et al.), alas, nothing happens but the same statement.
i am just learning about computers and know nothing at all except how to turn it on. i just booted up linux and recieved message: [0800654] Kernel Panic - not syncing: VFS: Unable to mount root fs on unknown - block (8,1)
View 5 Replies View Relatedhi..
I'm using ubuntu 10.04 and whenever i start nautilus from command line it shows error:
Code:
root@aduait-laptop:~/Desktop# nautilus
Initializing nautilus-gdu extension
** (nautilus:9990): WARNING **: Error calling get_folders: Launch helper exited with unknown return code 1
** (nautilus:9990): WARNING **: Error calling get_folders: Launch helper exited with unknown return code 1
** (nautilus:9990): WARNING **: Error calling get_folders: Launch helper exited with unknown return code 1
** (nautilus:9990): WARNING **: Error calling get_folders: Launch helper exited with unknown return code 1
** (nautilus:9990): WARNING **: Error calling get_folders: Launch helper exited with unknown return code 1
while installing ... Installing python2.4-2.4-1pydotorg.src.rpm
warning: user jafo does not exist - using root
warning: group jafo does not exist - using root
warning: user jafo does not exist - using root
warning: group jafo does not exist - using root
error: Legacy syntax is unsupported: copyright
error: line 55: Unknown tag: Copyright: Modified CNRI Open Source License
error: unknown filesystem grub rescue>
Background: My mother's HP laptop had Ubuntu and Vista on it, Ubuntu my brother's doing. He decided he wanted to take off Ubuntu yesterday (he had forgotten the password), and deleted the partition that it was contained within. The computer now boots to this error.
Inventory: We no longer have the install disk for Windows Vista, he cannot tell me what version he used of Ubuntu, what partition it was on, any of the specs for the machine, or generally any information about the system. All I am aware of is that error on the boot-up screen. I have nothing else to work with.
I would like to remove Grub, and Ubuntu, and leave Windows intact (the request of the owner of the computer), but I have no idea what commands I could use to get rid of either when I can't access Windows, or how to properly remove them if I did access Windows.
I know my way around MS Windows much better, but I just don't feel right trying to program something for Android on a Microsoft operating system. I am interested in Android programming so I followed the instructions on [URL] to install the environment on my computer...
I just installed the JDK, SDK, Eclipse successfully (or I assume):
* When I get to Step 4 where I'm supposed to run 'android' it will not run. I get the error message "android: command not found" (I am definitely in the right directory).
** When I double-click it in nautilus, it opens up in gedit. I can set the permissions in nautilus (through the properties - Allow executing file as a program) and get it to work,
My system:
Intel i7
Ubuntu 10.10 Maverick Meerkat
android-sdk-linux-x86
eclipse 3.6.2
Whenever I try to change a user full name, through System / Administration / Users and Groups, I get the following error: The configuration could not be saved - An unknown error occurred. Running Ubuntu 10.04.1 LTS 64 bit, freshly installed.
View 2 Replies View RelatedWhen I send mail via Evoultion it does seem to send ok but still the following error message comes up: Error while sending message. Failed to append to : Unknown error Appending to local 'Sent' folder instead. Not sure what's up with that but thought I would mention it.
View 3 Replies View RelatedWhen i try to add value 150 on portflood section of csf,i get following error:
iptables: Unknown error 18446744073709551615 PORTFLOOD tcp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 tcp dpt:80 state NEW recent: UPDATE seconds: 5 hit_count: 150 name: 80 side: source
Error: iptables command [/sbin/iptables -v -A INPUT -i ! lo -p tcp --dport 80 -m state --state NEW -m recent --update --seconds 5 --hitcount 150 --name 80 -j PORTFLOOD] failed, at line 996
how is limitation with ip_recent where highest value for hit_count is 20,and how i need to modify and recompile ip_recent.But i was not able find anything about either modify or recompiling that module.I have cent os 5.4 64 bit,iptables are installed over yum.Also i have 4 servers with completely identical configuration,yet on two servers portflood works while on other two it reporting that error.Maybe it was different install cd which caused this,but again i dont know why this doesnt work since iptables version are indetical.
My first day on a linux ditibution ever, windows user untill now. I just bought a dedicated server and used the automated tools to install debian.
Now I connected through ssh and I saw that python was already installed doing python --version (v2.7.9)
However running 'pip install beautifulsoup4' return -bash: pip: "command not found"
Is there something similar to windows environment variables that I need to set?
Is this a good resource to learn? : [URL] .... dating from 1999