Recently I installed a backtrack 4 final on my computer, but I couldn't browse the internet by wifi , when I use the slax networktool to analyze the newwork and see what the problem is, the tools showed as below:
wpa-supplicant:error while loading shared libraries: libssl.so.0: cannot open shared object file: No such file or directory. I also cann't find the libssl.so.0 in the corresponding diretory.
I'm having trouble getting my wifi devices to work on my 128bit WEP network. I have a new Thinkpad T400, with an internal Intel PRO/Wireless 5100 AGN. I also have some cardbus cards: a Lucent ORiNOCO Gold, a Linksys Wireless-G, and a TRENDnet TEW-421PC. I have them set up as interfaces eth2, eth1, and eth3. (The TRENDnet isn't recognised as a network card at all, so no interface for it.) I have installed the latest firmware for the Linksys card.
The /etc/sysconfig/network-scripts/ifcfg-* files are virtually identical for all of them, differing only in the HWADDR and DEVICE lines. So here's the behaviour:
1. The Lucent card comes up just fine.
2. The internal 5100AGN and the Linksys cards won't come up, and watching with iwconfig shows that they're either associated with my AP OR they've got an encryption key set -- but not both.
3. When trying to bring up the 5100AGN, I get the following messages:
iwlagn: index 0 not used in uCode key table
iwlagn: index 3 not used in uCode key table
/var/log/messages shows DHCPDISCOVER requests being sent, but they're bound to fail since the association with the AP with WEP isn't being completed. And yes, the ifcfg-* files really *are* identical except for the DEVICE and HWADDR lines. The /etc/udev/rules.d/70-persistent-net.rules file correctly maps the interfaces to the MAC addresses. So why does my antique ORiNOCO card work and thew newer ones fail? How can I track down what's being done wrong/not being done?
I was having a problem with cairo dock, asked on the board how to resolve was told to reinstall the visual driver for my monitor since I have an ati vid card since with the updated kernal u have to reinstall those drivers(didn't know that, I'm new to opensuse). I thought I did that before so I completely uninstalled it so I could then do a fresh reinstall but I wasn't paying attention and my laptop was unplugged for a while. I stepped away while the install was going on and my laptop died.
I tried plugging it in but had to restart my laptop when I did I got the command line rows and when I tried to start GDM it wouldn't start, I did so as SU. Attempted to connect to the internet via networkmanager and couldn't get wifi or wired to work. Anyway I can access my desktop visually just so I can start yast and install the driver or will I have to reinstall 11.2 or use the cd to repair? If so how do I use the cd to repair?
i'm trying to search on the internet for some guidelines to built a HA between 2 linux servers, they are in fact SIP PROXYS. I've been checking on the linux-ha.org and now i'm quite confuse, they mention Pacemaker, Corosync and then glue..
View 1 Replies View RelatedHPG62-144DX notebook, Windows 7 and considering Ubuntu. I installed 10.10 and tried to get my wifi running but that wouldn't work. I had a connection only sometimes and it broke up after 5 minutes. Once I got a webpage but annoyingly slooow. Got the advice to update drivers and stuff. But the wifi connection is the only one I have...
Went back to 10.4 32-bit. Booted from CD and will keep it that way until this is sorted out. Now I see my wifi hotspots directly and I have no problem to establish a connection. The icon shows 3 bars quality. Network Tools says: Wlan1 = Realtek, Transmitted bytes xxx Received bytes yyy, no errors, link speed = 1Mbps, State = active. Looks good!
The only minor thing here is that enabling/disabling my internal Atheros antanna also enables/disables my Alfa USB Wifi adapter (based on Realtek 8187) but who cares. A bigger problem is: when I start Firefox it doesn't come up with a webpage. It just keeps on saying: "loading". At the bottom of the screen it keeps saying "Looking up" for ages. Nothing further.
I'm running Ubuntu 10.10 on my Precario Laptop I'm connected via WiFi to an Edimax BR6424-N and i cannot login to Msn and browsing is extremly slow as soon as i connect to any other network but myin everythings fine, Ive searched the web alot and found that i should down the mtu in linux so i did, from auto to 1350 and still i keep getting disconencted from msn and briwsing is just extremly slow, Im In the same room as the router so distance is not the issue...
View 1 Replies View RelatedI have been trying to get aircrack-ng program to get to work but apparently i needed a negative-one-channel-maxim patch in order for it to work successfully. I have looked over wiki of aircrack and followed the guide a few times but every time my compiled module was rejected my modprobe.
View 1 Replies View RelatedRunning 9.10 Ubuntu on my laptop. It connects fine to regular access poitns, but for some reason it won't connect to my android wifi adhoc sharing. I have it as dual boot with Windows and windows connects to it perfectly. From Ubuntu 9.10 it tries to connect... then just disconnects. Would be killer to be able to use it with my adhoc wifi sharing! I prefer my Ubuntu boot, rather than my windows one
View 6 Replies View RelatedI've been using Ubuntu for a few years now and in general am very pleased with it; it's Achilles Heel is however WiFi.My daughter has an older HP laptop with built in Broadcom wifi, Lucid did not recognise this, neither did it recognise a Netgear PCI card or a Netgear USB adapter.Network manager showes wifi greyed out.lspci -vnn shows BCM4303 802.11b [14E4:4301] (rev 02)lshw shows *-network:1 UNCLAIMED and shows product as BCM4303 802.11b wireless LAN controller.Wifi is the most popular connection method for the average user, until it is made simpler to resolve problems a lot of potential Linux users
View 3 Replies View RelatedI've just installed Slackware 13.1 in two different laptops for first time. I have some strange internet browsing behaviour in one of the laptops. I've installed 2 internet browsers(firefox,opera) using the directions from Slackbuilds.org and there is also konqueror pre-installed. Moreover I installed Wicd network manager.
I can browse some pages e.g. ..... with firefox very slowly but NEVER facebook. I can browse almost any page, even facebook, with OPERA but very very slowly. The same goes with konqueror... Wicd shows that i am always connected with my WPA wireless network
Laptop details:
Quote:
Toshiba sattellite a100-209
//-----------------------------------------------
Processor Intel Celeron M 370 / 1.5 GHz
Databus-Speed 400 MHz
//-----------------------------------------------
Installed RAM 512 MB
Technology DDR2 SDRAM - 533 MHz
[code]....
Lucid i386 Dell inspiron 1525 with 4695agn, iwlagn driver Just installed a new router, Netgear WNDR3700 Old inspiron laptop with Hardy installed connects fine to G wireless An Acer with Vista connects fine to G wireless My Inspiron with Lucid connected fine until I enabled WPA on the routers 5Ghz band. At that point I couldn't connect on any, 2.4 Ghz no enc, or the wired connection. The Windoze pc was connecting fine. Fired up the old Hardy laptop and it connected fine.
Now here's the weirdness!! As long as I had the Hardy laptop connected either wired or wireless, I could connect to the router with the Lucid laptop to unsecured wireless or wired. Soon as I turned off the old Hardy laptop, my Lucid machine could not connect? WTF? I then disabled security on the router and I could connect with my Lucid machine?
I just installed a fresh copy of Fedora 14. When I am browsing the internet it seems like it takes forever to look up the host. In firefox I went and disabled the IPv6 option and it seemed to fix the issue, but Chrome is still having the problem. Is there a way to change this setting in Chrome?
Also I have installed conky but I can't figure out how to get it to start automatically when I log on? Can someone point me to the file I need to edit to make it work?
I'm hoping someone might be able to suggest what went wrong with my networking, so I can continue using OpenSUSE! I've been running version 11.3 with KDE (64 bit) for a few months now (dual booting with Ubuntu); everything had been working fine until about a week ago - the only issue I had was that some internet-based things seemed a bit slower than in Ubuntu.
Anyway, after the last set of updates I installed (around Jan. 6th; there was a kernel update and a few other things. I'm not sure where to locate the history in YaST) I lost functionality of all internet-based programs, with the exception of Firefox. (I'm using Firefox in openSUSE right now to access this forum, for example.) Although I can browse the web just fine, I can't use Thunderbird to check email, the weather and comics plasma applets don't work, and the system can no longer connect to the software repositories.
I didn't change any settings (to my knowledge), but somehow Internet access is being denied to most of my system!
I am totally new to the fedora, and i have installed fedora 12. Once if I connected to internet, it will work 5 to 10 minuts fine, But later onwards i will taking to search.com page where i cannot able work on any websites. Then i checked with my internet service provider, there is no problem they say.
View 2 Replies View RelatedI have a Fedora 11 Server which act like a Internet gateway for our LAN. I have my own iptables andt squid. We daily starts up & shuts down the server. Since last few days I am facing a unique problem. When we starts the server we are able to brows the Internet on the Server but from the client machine we are unable to do so but we can ping any internet sites/Static IP from the Client machines. After 2-5 times of startup and shutdown of the Server. We are able to browse internet from the client machine.
View 2 Replies View RelatedI have installed powerdns and powerdns recurser with the mysql backend. everything is working fine when I add a domain let's say www.test.com to the database and do host[URL].127.0.0.1 pdns returns the A record.Now what do I need to do next so that this dns works on the internet.I registered two nemservers ns1.mydomain.com and [URL]..at godaddy and set them to [URL].. is not working it seems like the dns server i built is not working from the internet.
View 1 Replies View RelatedI have a 2.6 P4 with HT and 1GB of PC3200. i'm using an RaLink 2760 based wifi card. i compiled the driver from source, don't think it matters because i get this problem on ethernet as well. video is RV280 (radeon 9200). i have 3D accelleration supposively and get 570fps steady with glxgears. i'm in F11 updated as far as yum will take me.
When browsing websites, usually forums but even things like ....., the computer acts like it's being bogged down by something. i scroll down a page and it takes a few seconds for the screen to catch up. i understand i'm not running the most up to date hardware but i don't think this machine should have any problems with web browsing.
Here's an lsmod
Code:
I've been tinkering around with Linux over the past couple weeks. I've played arodn with both Ubuntu 10.10 and Linux Mint 10 and it's been a 99% positive experience. I have noticed an issue regarding my internet connection.
I've noticed when I download a file in Ubuntu (either from the software manager, BitTorrent or just a regular download in Firefox), browsing the web on my computer becomes near impossible. The download itself runs at a good speed for our DSL connection (around 200 KB/sec) but anything else near a standstill. Just loading ESPN.com on my PC can take a minute or two. Someone else playing a game in the house will go from a regular 100-200 ms ping to 5000+ right when the download starts. When I stop the download, internet browsing and gaming speeds go right back to normal.
The weird thing is the same thing happened when I installed Linux Mint 10. When I boot into my Vista partition, this isn't an issue. Downloading a file in Vista doesn't affect anything, but it's happening every time in both Ubuntu and Linux Mint.
I can't get n-mode working on my 5100AGN. I tried
Quote:
iwconfig wlan0 modu 11n
but it doesn't work.
iwlist modu gives me this:
Quote:
wlan0 unknown modulation information.
I really need n mode for 150 Mbps and greater range provided by N-mode for my UGV (unmanned ground vehicle) project.
I'm running 11.2 on a Dell Latitude D630. Everything has been great other than issues with Suspend and hibernate not working correctly. However after about a month of use browsing the web has really slowed down bad. It doesn't seem to matter if it's in Firefox or Chrome either. I am using a wireless connection that is getting the signal at 85-95%. Even though I still tried using a direct cat-5 connection to the router and it was still slow as well. I have the fastest broadband connection my cable offers and my windows boxes on the same network are still flying.
View 2 Replies View RelatedI powered up the acer aspire one zg5 and it goes to the first screen but does not connect to the internet when I press the internet button the wifi connection is fine and will download updates fine but will not connect to the browser, am so out of my depth as not familiar with this system , if I dont fix this will have to blame one of the kids.
View 1 Replies View RelatedI left my laptop on stand by and today on the morning I could wake up my laptop so I turn it of the manua way. When I start again, I notice there is something going wrong It said to me I don't have internet. I check the modem and yes I have internet, I check the lan cable and it looks it works fine. So I thought it was the ethernet card that was bad. So I restar again and enter with Windows 7, and yes I have internet. So it made be one problem of my Ubuntu. I did an ifconfig and got the following
[Cpde]...
I installed F15 Xfce and now I keep getting the following message after i login: Could not loop up internet address for WXZ. This will prevent Xfce from operating correctly. It may be possible to correct the problem by adding WXZ to the /etc/hosts on your system. I tried a fresh install just to see if I did something wrong but I keep getting the same message.
View 4 Replies View Relatedi dled ubuntu 9.10 and i got it ready on ma pc but after the setup process is done i couldnot get it attached to my LAN or internet connection i use a DHCP router wich need no configuration as it was shown problem is even my acctivity lamp on da router doesnot give any activity light btw i got some records as
[code]...
i'm using redhat enterprise version, i'm facinh problem in wifi. i able to browse internet via ethernet but unable 2 connect via wifi and how to install applications.
View 2 Replies View RelatedI have installed openSUSE KDE 11.3 on my notebook. Everything looks great, but I can't connect on internet. It looks like dhcp don't work. Wireless works fine, only auto eth0 don't work.
View 9 Replies View RelatedMy Ubuntu 9.10 (64 bit regular old desktop version) machine has two NICs, eth0 and eth1. eth0 does not connect to my router (and thus the Internet) automatically. I have to manually click on it in the NetworkManager applet after every reboot.
Internet connection sharing has also been impossible. I gave up trying to do that after about 2 weeks. I was simply trying to share my Internet connection with a Windows XP machine over eth1, but it never worked. I could ping one machine from the other, but couldn't get to the Internet from the Win XP machine.
Removing NetworkManager may be the ticket. Most of the tutorials for Internet connection sharing tell you to enter commands in the console. Maybe one of them will work once I remove the NetworkManager applet.
I'm a Linux newbie. Used to use Ubuntu, but I switched to Slackware because I want to learn how Linux works better.
On my Samsung qx410 laptop, I can't connect to the internet. I went to the System Settings -> Network Settings and all the tabs there, but it wouldn't detect any connection, wireless nor wired.
I noticed that the kernel of Slackware 13.1 is out of date, so I tried compiling a newer one, but I couldn't get that to work.
I tried downloading this file: iwlwifi-6050-ucode-41.28.5.1.tgz but even after reading the readme, I had no clue how to go about installing it or even whether it was the right thing to install in the first place.
How can I get my internet working?
yesterday I installed pulseaudio and pavumeter. This morning I couldn't connect to the internet anymore. I checked the settings but couldn't see any changes. I read the post at [URL]?t=370108 and I'm going to post the outcome of the instructions here:
1.) My Notebook is a Sony Vaio
2.) Wireless brand, model and chipset:
Code: ubuntu@ubuntu:~$ lspci -nn | grep Atheros
Code: 02:00.0 Network controller [0280]: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01)
3.) Check interface:
[Code]....
In short: browsing the internet with domain names does not work. The long version: I've configured my network with DHCP and ifup. Ping works on my internal net and with servers in the internet. Dig work's too! I get the right IP to the requested domain. When i try to access the internet using firefox or even wget i get an DNS error. For example wget is showing the following error: Resolving heise.de... failed: Name or service not known. wget: unable to resolve host address 'heise.de'
Again dig show me the right IP and if i add the entry to /etc/hosts it work's too! I've even tried it with manually setup of ip address, nameserver and default gateway but with the same result. Switching off the firewall has no effect on this problem, too.