i dled ubuntu 9.10 and i got it ready on ma pc but after the setup process is done i couldnot get it attached to my LAN or internet connection i use a DHCP router wich need no configuration as it was shown problem is even my acctivity lamp on da router doesnot give any activity light btw i got some records as
[code]...
I am running Ubuntu 10.10, and I would like to use my computer to share the internet connection from an ethernet port. For example, I would like to set up my computer as a wireless access point so I can create a network that other computers can connect to for internet.
View 3 Replies View RelatedI left my laptop on stand by and today on the morning I could wake up my laptop so I turn it of the manua way. When I start again, I notice there is something going wrong It said to me I don't have internet. I check the modem and yes I have internet, I check the lan cable and it looks it works fine. So I thought it was the ethernet card that was bad. So I restar again and enter with Windows 7, and yes I have internet. So it made be one problem of my Ubuntu. I did an ifconfig and got the following
[Cpde]...
Lucid i386 Dell inspiron 1525 with 4695agn, iwlagn driver Just installed a new router, Netgear WNDR3700 Old inspiron laptop with Hardy installed connects fine to G wireless An Acer with Vista connects fine to G wireless My Inspiron with Lucid connected fine until I enabled WPA on the routers 5Ghz band. At that point I couldn't connect on any, 2.4 Ghz no enc, or the wired connection. The Windoze pc was connecting fine. Fired up the old Hardy laptop and it connected fine.
Now here's the weirdness!! As long as I had the Hardy laptop connected either wired or wireless, I could connect to the router with the Lucid laptop to unsecured wireless or wired. Soon as I turned off the old Hardy laptop, my Lucid machine could not connect? WTF? I then disabled security on the router and I could connect with my Lucid machine?
My Ubuntu 9.10 (64 bit regular old desktop version) machine has two NICs, eth0 and eth1. eth0 does not connect to my router (and thus the Internet) automatically. I have to manually click on it in the NetworkManager applet after every reboot.
Internet connection sharing has also been impossible. I gave up trying to do that after about 2 weeks. I was simply trying to share my Internet connection with a Windows XP machine over eth1, but it never worked. I could ping one machine from the other, but couldn't get to the Internet from the Win XP machine.
Removing NetworkManager may be the ticket. Most of the tutorials for Internet connection sharing tell you to enter commands in the console. Maybe one of them will work once I remove the NetworkManager applet.
yesterday I installed pulseaudio and pavumeter. This morning I couldn't connect to the internet anymore. I checked the settings but couldn't see any changes. I read the post at [URL]?t=370108 and I'm going to post the outcome of the instructions here:
1.) My Notebook is a Sony Vaio
2.) Wireless brand, model and chipset:
Code: ubuntu@ubuntu:~$ lspci -nn | grep Atheros
Code: 02:00.0 Network controller [0280]: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01)
3.) Check interface:
[Code]....
Its a case of ".... wireless network connection active but still not internet connection .."I am using WEP - 128 key ... Works when I connect directly using ethernet cable ... but not wireless (pci and wireless router)
ubuadmin@ubucomputer:~$ ifconfig
wlan0 Link encap:Ethernet HWaddr 00:06:25:12:83:3b
inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::206:25ff:fe12:833b/64 Scope:Link[code].....
I tried to install Xubuntu 10.10 Maverick as dual boot on my laptop. However when xubuntu is on, I can't find a way to connect to internet. When I try the 2 arrows on the up-right corner the option for wireless is deemed. I tried offline/online, that did not work either. when I click the firefox It says you are not connected.
View 1 Replies View RelatedI seem to have is trying to get the internet to work. I can go to ..... ect but when I try to run playonlinux it says you do not seem to be connected to the internet, please post if you have anything useful, as I said I am very new to linux so be as detailed as possible.
View 4 Replies View RelatedI have installed Fedora 11 recently. I want to share my Internet connection.
I have e LAN connection eth0 which is connected to internet.
I have a Wireless connection wlan0.
I want to share my internet connection with wireless connection.
I have two linux laptops. Currently, I'm using both of them at work, side-by-side. Now the problem is, I'm connected to a wireless router, but the wireless only works on one of the laptops. So I'm stuck with one laptop that has no access to the internet. Both machines do, however, have working ethernet nic cards. So, I was wondering if I could use the laptop with the wireless connection to share the internet connection with my other linux machine and access the internet on both of them. Or as an alternative, just use the internet on the machine without wireless and be able to switch back and forth, that would increase my productivity like 30 fold.
View 5 Replies View RelatedI connected my laptop running with Ubuntu 11 in the LAN but I couldn't access internet.But I could ping to the other computers connected in the LAN. I tried the same thing with windows 7 in the same laptop and I could access internet.
View 1 Replies View RelatedI have the "Work Offline" problem: when I boot up, the icon on the toolbar tells me I have "No network connection". This is not quite true, since I can access the first page of any website - only subsequent pages are inaccessible. I get a message saying that Firefox is offline. However, when I uncheck "Work Offline" in the File menu, it makes no difference to this behavior.
The problem is on my Ubuntu Dell desktop, which is connected to the internet with cable broadband via a D-Link router (wired connection). It has worked fine up till now. I use Ubuntu 10.04 and Firefox 3.6.11. I am writing this on my Ubuntu Dell laptop which is wired to the same router, so I assume the problem is not the router. I have tried various strategies suggested in threads on these forums, including editing about:config, changing "allow" to "deny" in some lines of /etc/dbus-1/system.d/NetworkManager.conf and changing from Automatic (DHCP) to Automatic (DHCP) Addresses only, but no luck so far. The contents of ifconfig are:
eth0
Link encap:Ethernet HWaddr 001:aa0:91:a7:51
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets: 0 errors: 0 dropped: 0 overruns: 0 carrier: 0
collisons: 0 txqueulen: 1000
RX bytes: 0 (0.0 B) TX bytes: 0 (0.0 B)
[Code]...
If I comment out "auto eth0" as well, it makes no difference. If I uncomment both lines ("auto eth0" and "iface eth0 inet dhcp") then I lose the internet connection altogether.
I just installed Ubuntu 11.04 desktop on my desktop in dual boot with Windows 7.
Heres my problem, I am unable to connect to the Internet even though my wired Ethernet connection says it is connected normally. The wierd thing about this is that I also have a wireless card in my desktop and when I connect through that I am able to connect to the Internet. I am connecting to a router that is functioning as a repeater to my main router/cable modem. I have tried to solve this myself but am having no luck. Ironically, earlier today suddenly my ethernet connection worked for a few minutes without me modifying anything.
The output of some terminal commands are below.
Quote:
Quote:
Quote:
However a pint to that ip address (my router) is successful.
Quote:
Hosts.allow and hosts.deny are both fine (not blank but no entries)
I'm using ubuntu 10.04 dual boot with windows xp. Recently I'm having problems using the internet, I can connect to our wireless network but can't use the internet, firefox just says error on opening the page. But when im in windows xp i can surf and use the net. Is their a way to diagnose whats causing the problem. I use a Realtek RTL8187 wireless lan, it works fine before its just now that its not working with ubuntu.
View 4 Replies View RelatedI installed ubuntu 10.10 with windows 7 (dual boot) in my fujitsu lifebook. I use zoom ultra by Sentar EVDO MODEM ST880U. I tried pppoeconf or DSL or mobile broadband but fail to connecte internet. In first exprience on ubuntu 9.04 same via dell latitude with Huawei EC123 Data card.Any one can assist me to overcome the bad condition to like ubuntu as on offline mood in my work zone.Actually i used ubuntu 9.04 for my offline work in Dell. Now also same condition starts. Please help to come internet and enjoy ubuntu.
View 2 Replies View RelatedOS is Ubuntu 10.04. I have HomePNA-connection which is converted to Ethernet by Netsys NH-300 HomePNA-Ethernet adapter.
The problems that I have: Sometimes when I boot I don't get IP from DHCP. If try to ping any address I am told that host is unreachable. Sometimes this I can get IP by using command dhlient -r and dhclient to request new ip. Sometimes only way to get my connection to work is booting the computer.
Sometimes the connection works fine from the start but disconnects later for short time. Sometimes this happens every ten minutes, sometimes less often. If I wait for a while the connection might start working again, if not dhclient -r or reboot helps usually. But not always.
I have never done this before but stood up a new Debian (testing) x64 system. It only has 146GB available for RAID1 so I created a 500GB iSCSI LUN on my NAS device on the network and am really confused how I can attach my Debian to the iSCSI LUN I created. Right now the OS is installed all locally on the machine but I would like the iSCSI LUN to be the /home directory for mail storage. Is this possible or do I need to mount the LUN to a newly created folder / mount point that is locally attached?
View 1 Replies View RelatedI just want to use Internet Connection Sharing (ICS) to connect to the internet. I have done a massive amount of troubleshooting, but some of it seems to contradict itself, and the only two things that I know for sure are that it used to work, and that my Ethernet cable is not the problem. When I use Terminal utilities like ifup and dhclient it seems that it can not determine IP information, but when I try to put it in manually, the "Apply" button grays out right after I finish typing it in. When I try to connect normally, in KDE or GNOME, the icon acts like it's connecting, then instead of having the connected icon, I receive a notification that "the network has been disconnected", and it goes back to the disconnected icon.
Oh, and by the way, I know that I could probably find a workaround, but I have limited resources, and this used to work. The Linux is a Dell desktop with Fedora 12 and the Windows is a Windows 7 HP laptop.EDIT: I hope that I didn't mess something up, but I accidentally used system-network-config to try putting in the IP address there, and ended up changing it back to the original settings, but the computer is now calling it Auto Ethernet in the taskbar icon, although sudo iwconfig in the terminal still calls it eth0.
I have installed fedora 12 recently. after installation i tried to connect to the internet using BSNL broadband connection. I filled in the details such as IP, Netmask, Gateway and even DNS servers. In the services also I ensured that the network manager services is on. However even though my computer cannot connect to the internet. I then tried the ping test of the modem from the address 192.168.1.1 and found that the ping test is successful. Then i tried the network administrator and there I noticed something unusual.
There are two options in the devices eth0 and eth1 thats ok but the unusual; thing is that the Activate (green button), Deactivate (red button) and even the delete buttons are in the background and I cannot select them. Isthis the problem for the network connectivity.
[Code]....
I then tried the ping test of the modem from the address 192.168.1.1 and found that the ping test is successful. Then i tried the network administrator and there I noticed something unusual. There are two options in the devices eth0 and eth1 thats ok but the unusual; thing is that the Activate (green button), Deactivate (red button) and even the delete buttons are in the background and I cannot select them. Isthis the problem for the network connectivity.
I installed Ubuntu 9.10 using the default setup (Gnome I think) and on my Gateway Notebook using a wireless connection. It appears to be working great and I can even see my Windows drives and network storage on my home office systems.I have also set it up to run my favorite Bible software on Windows running under VirtualBox. I then installed the KDE Desktop so that I can select either desktop when logging on.
However, once I am in the KDE desktop, I cannot connect to the internet. I have checked and double-checked and the wireless settings seem to be the same on both the Gnom and KDE Desktops but still no network or internet connection when using KDE. I might mention that I am using the 64 Bit version of Ubuntu.
I am using Ubuntu 9.10 and trying to use Internet Connection Sharing through my Dell Mini 9 laptop.
The incoming internet is from wireless The outgoing internet is from Ethernet I am using a crossover cable as I have heard this is necessary I followed the 9.10 method on my Auto Eth 0 connection Here is a link to the Ubuntu Documentation I used The computer I am trying to share to does not pick up the internet being shared from the cable.
I have an EMachine T3095 with xp home os and ubuntu os. I install ubuntu in windows. In windows I don't load internet software, yet surfing the web fine in both os. Recently did complete re-installation of windows and ubuntu os, for got 3 trojan viruses on windows. Now can't get on the internet in windows. Emachine said I need to get motherboard downloaded to get LAN, which is not on windows software. Isn't the same motherboard used by ubuntu to get on the internet? Obviously some software has been corrupted? Which software could be the problem. Is there a link to download it?
View 2 Replies View RelatedI have a system with windows xp, and to connect to internet I use a usb card EVDO (brand ZTE) given by my provider (BSNL India).Now I installed ubuntu 10:04 but I do not know how to make my usb card work to connect to internet (the provider gave the software only for win xp)
View 9 Replies View RelatedI'm using 10.04 I tried to connect to a free WiFi connection. I had the password for it too. I had been able to access the connection 2 weeks ago with no real trouble. Now, the thing at the top of my screen indicates I'm connected BUT I can't get Firefox to access any sites. I can't download email using Thunderbird. Pretty strange isn't it?
View 8 Replies View RelatedI tough that firefox was the problem of my very slow web sites loading, but I am suspecting that sometimes the internet connection is the reason, maybe for some reason that I don't know it can not just connect to the site.I am running Linux quick-desktop 2.6.32-22-generic #33-Ubuntu SMP Wed Apr 28 13:28:05 UTC 2010 x86_64 GNU/Linux.when I browse the web it is very slow to load.sometimes I get this error message.Could not locate remote server.Even I know the site is up running like google.
View 6 Replies View RelatedWhen I unplug the ethernet cable from this laptop and plug into my Ubuntu 9.10 Desktop I get a wired connection automatically but I have no internet connection in Mozilla
View 9 Replies View RelatedI'm trying to connect two PCs to the Internet (or at least to create a local network) using a crossover cable. My main PC (the one that has two ethernet adapters and is connected to the Internet) runs Windows 7 and my secondary PC runs Ubuntu 10.04.Unfortunately, it doesn't work. Both systems send out packages but don't receive anything. How can I possibly fix this, so that I could use LAN and share the Internet connection between PCs? Does Windows need special software to recognize Ubuntu (or the other way around)?
View 1 Replies View RelatedI want to use the wifi card in my laptop to share my internet connection to my Android Phone.Android phones don't support Ad-hoc networks yet (maybe not ever) so I need to the shared network in Infrastructure mode not ad-hoc mode.Using Ubuntu 10.04, If I click on the NetworkManager Applet ( 0.8 ) and select Create new wireless network, it will create an ad-hoc network, I then tried changing this to infrastructure, but it didn't work.Is there some way of modifying this created network to make it appear as infrastructure, or alternatively create a shared internet connection in infrastructure mode?
View 2 Replies View RelatedI've just installed Ubuntu 10 as a last resort to save my laptop from the bin. However, I'm having similar issues to when I installed 9.x a few months back. First off, I have no network connection at all (using another laptop just now). I've plugged in the network cable from the modem and although it looks to be doing something, it doesn't establish a connection. The wireless is also not connected due to Firmware not installed. I remeber this was a common issue with the Broadcom 43xx modem but I need to get the wired network going first to be able to download drivers *I think*.
View 1 Replies View Related