I have installed bluez.4.81....but when i install /home/george/Desktop/obexd-0.37.tar.gz,a configuration error occurs telling that libbluetooth is required. Is there any solution??
i want an option for receiving files.
After having problems with lxde crashing while running Jessie, and re-installing Wheezy, I am not able to mount my WinXP drive. In the past I was able to run pcmanfm and mount the drive from there. It would ask for my root password and then would mount the drive. Now, however, when I click on the drive icon it gives me an error message saying authentication required.
One thing is that when I installed Wheezy I had the WinXP drive disconnected so as to not inadvertently install Wheezy on the wrong drive (I have two identical drives). After installing I connected the WinXP drive and then did a grub update. I can boot either drive, as expected, but I can not mount the WinXP drive from pcmanfm. Do I need to change the Policykit?
when i try to use apt an error occurs: dpkg: parse error, in file '/var/lib/dpkg/status' near line 27317 package 'virtualbox-3.0': error in Version string `3.0.4-50677_Debian_lenny': invalid character in revision number E: Sub-process /usr/bin/dpkg returned an error code (2)
i tried to :
1- replace the file status with status-old
2- replace it with all the backups located in /var/backups/
and the same error occurs
It was working until a recent update. I have the icon in my system tray. Networkmanager is running. I have tried to reboot the computer and restart the network manager. All switches that could turn the network off is on. Every time I click on the icon in the system tray it tell me the networkmanager is disabled.
View 11 Replies View Relatedi have ubuntu karmic 9.10 and when i try to update anything or install anything the a very similar error occurs."(Reading database . . . 55%dpkg: unrecoverable fatal error , aborting: files list file for package `com.palm.net.precoddr.fcoaster' contains empty filenameit repeats this message 3 times then gives up i believe.
View 9 Replies View RelatedI have a linux database server (ver 2.6.18-92.el5xen) which i want to configure for sending mails as and when some errors are written into some log files by an oracle process.when i just try to run this command mailx -s "test.it just does n't show any output and kind of hang.Pls tell me the step by step process for configuring the server so as to send mails from it. Also I am not aware if the required rpm are installed in the machine or not.
View 9 Replies View RelatedI am new to mysql can some one provide me the documentation or some recommended links to start the configuration of mysql server on RHEL. Also if I get the database schema, how can I replicate the same in my machine. Any documentation for this?
View 8 Replies View RelatedI esablished a dual boot with Windows 7 and Ubuntu on separate partitions. Then, as I realised that Windows 7 was rubbish and Ubuntu annoyed me by losing wireless connectivity after an update, I decided to go back to Windows XP for a while. So I did what I probably shouldn't have done, and formatted the partition (or so I thought) with Ubuntu on, using Windows.
Now, on booting up the system, all I can get is the Grub Rescue prompt and nothing in the Bios menus seems to be of any assistance.
I've tried booting XP from a CD, but a blue screen error always occurs at the same point in the installation. I wonder if I should make a CD/external drive with Ubuntu on, reinstall it, and go from there?
I am running Linux Mint 8 on my Dell Precision 350 computer. Every so often (sometimes every few hours, sometimes every few days, it appears to be random) my desktop will crash and display the message:
"70822.286411 EXT4fs error (device sda1): ext4_ext_check_inode: bad header/extent in inode #139281: invalid magic - magic 800c, entries 121, max 3278020), depth 171(171)"
This is displayed several times on all of the terminals, but with different numbers each time. When this happens, typing any commands in the terminal result in the error message being displayed again. When I restart after this happens, linux generally displays "Give root password for maintenance (or type control-D to continue):" and I give the root password. Running "fsck /dev/sda1" seems to fix this problem for the next boot, but then it will come back in either a few hours or a few days. Reinstalling the distro does not work, as I have already tried this. I suspect a hard disk error, but before I run out and buy and install a new hard disk, I wanted to know if maybe there is some way to fix this through software.
I can't insert songs in my iPod nano.There is an error occurs which says that it is a 'read only file system' in ubuntu
View 7 Replies View RelatedDuring upgrading from 8.04 to 10.04, I was asked several times what I wanted to do with menu.lst. I gave the same reply each time: "keep the local version currently installed". I wanted it the way I had when using 8.04; that is, not having the un-customizable grub menu I've experienced before with 10.04.
When I was done installing 10.04 and was going to reboot, the GRUB menu appears as it has before, and the Ubuntu entry says "Ubuntu 8.04", even though it's now 10.04. But when I choose "Ubuntu 8.04", the following error message occurs:
Code:
error sending message: Connection refused
udevadm[900] error sending message: Connection refused
udevadm[901] error sending message: Connection refused
udevadm[902] error sending message: Connection refused
error: unexpectedly disconnected from boot status daemon
[Code]...
When running sudo apt-get upgrade, the following error occurs.
Code:
No apport report written because the error message indicates its a followup error from a previous failure.
No apport report written because the error message indicates its a followup error from a previous failure.
Errors were encountered while processing:
We are running into issues with a File Upload script written in PHP. We can upload files without issues except with .*x files (such as .docx) We are getting permission denied errors. The error occurs when we use move upload file, to the new directory within our PHP app. If we give the uploads folder 777 access, it works fine without error. I dont like that. So I set it to 775 (Also dont like this), but it didnt work until I gave group ownership to www-data (I really dont like this)
This issue only happens on our production server, which is Ubuntu 9.04, running Apache2.2 and PHP5 will all the newest updates. We also have all MIME's configured, and are able to download the file from Apache without error. The first thing we noticed before the file permissions error, was that the MIME type changed to .zip when we used mime content type function. But yet using the FILES array, it still showed .docx.
I got some sourcecode written with c++. I found it did not supported by the newer version of gcc. So I wanted to install an older version. But it always comes up with the question like "./read-rtl.c:653: error: lvalue required as increment operand", what should I do now?
View 6 Replies View RelatedI have a NAS (dlink-320) with a fully working fun_plug (http://wiki.dns323.info/) Linux system.However when I try to install x263 the configuration scripts says it need the math function log2f()But because fun_plug uses uClib instead of glibc and uClib have not yet implemented log2f() function I am trying to compile the glibc instead. I am only interested in the math part of glibc but have not found any documentation to just compile this part so it seems that I have to compile "most" of it. have gli
I have copied glibc-ports-2.9/sysdeps/arm to glibc-2.11.2/sysdeps.and I enter
Code:
../configure --prefix=/ffp --libdir=/ffp/lib --includedir=/ffp/include --enable-shared --build=arm-linux
but get the following error message
[code]....
I made a script that contains repetitious commands (snmpget and awk are the only ones at the moment. Running these commands from standard terminal work, but when run within a script, I get:
./reg_sm_count: line 10: snmpget: command not found
./reg_sm_count: line 10: awk: command not found
./reg_sm_count: line 10: snmpget: command not found
[code]...
We can use inotify related tools (fam, etc.) to know "when" a file change occurs, but, Can I know where (file position, offset) this change was made? For example, suppose that you have a big file and you are monitoring changes on it, using inotify-tools package or something like that you can take acknowledged if another process chage that file, but How can I know "where" that change was maded in order to avoid read all file content looking for a change maded?
View 5 Replies View RelatedI have a bluetooth headset for a cellphone, which I would like to use with my Ubuntu computers. I'm currently trying to do this with a computer running Jaunty. I have successfully paired the headset with the computer. But when I try to send an audio file to the headset, I get the "Sending files via Bluetooth dialogue box, immediately followed by the error message:
Quote: org.openobex.Error.NotSupported and no file transfer occurs. I am able to do other Bluetooth operations with other devices - eg I can send/receive files between the computer and my cellphone. It just seems to me that using a Bluetooth cellphone headset is not supported, or that I am doing something wrong.
UPDATE: I just tried doing this with my other machine running 10.04, with similar results. It looks momentarily like it's going to transfer the file, then reports that "an unknown error occurred". Is it just not possible to use bluetooth headsets for cellphones with Ubuntu computers? That doesn't seem very likely: when the computer detects the headset, it reports it as being a "headset". So why won't it work? What am I doing wrong?
After completing the installation using kickstart , the exception is occured, just after performing post installation,i am sending the exception image
View 8 Replies View RelatedRelease 10.04 (lucid)Kernel Linux 2.6.32-31-genericGNOME 2.30.2I'm interested in upgrading my Linx (i have NO CD.)- I've done all the updates so far (but not upgrade) - I do get an "eee" error - which occurs at each update, i can't get rid of - But all updates seem to be completed.How / what screen do i go to to "upgrade". I can't see any upgrade option in my system, admin areas of my system.
View 8 Replies View Relatedwhat is the required configuration for installation oracle 10g on linux
View 2 Replies View RelatedI am trying to use the sakis3G, i choose the option connect 3G, it asks me about username required by APN?? I have no usernames, and I don't know what APN is? I prefer using the sakis3G since it looks simpler than using USB_ModeSwitch which I didn't manage to understand it from the sites you posted.
View 14 Replies View Relatedfscheck is quite annoying, since it usually occurs when I reboot my system performing administration tasks. do I actually need fscheck if Im using the ext3 file system? if not how would I extend the period between checks or just turn it off altogether?
View 9 Replies View RelatedI tried installing the ATI driver for my specific card and after I did, I couldn't get a GUI, just console.So I went and uninstalled the driver but now, my dual screen setup is disabled. I try to reactivate it through the desktop display manager but I get "The selected configuration for displays could not be applied. Could not set the configuration for CRTC64" error.Anyone know how I can get the display configuration of when I first installed? That seem to work fine for dual displays.
View 5 Replies View RelatedI set up the 'Proxy' from Yast and they tested successfully. I can connect to internet, but why am I getting 'ERROR 407 proxy authentication required'?
FYI, my comp is the part of company .NET network with bunch of firewall and security...
Im having this error when im trying to edit my root directories...
View 9 Replies View Relatedi have just installed Red Hat linux 9 workstation ,i have configured the lan ip and successfully ping to other pcs on network ..but problem is internet is not working , i have already set the proxy setting, i have windows environment and running isa server 2006 proxy server ,when i trying to browse any site , isa eroor page occur "error code :407 proxy authentication required" Linus machine couldnot prompt the user credentiall.
View 2 Replies View RelatedI try to download the Tomcat from my LINUX machine with command:
Code:
wget -d -v http://archive.apache.org/dist/tomcat/tomcat-5/v5.5.23/bin/apache-tomcat-5.5.23.zip
I got error as follow:
Code:
[root@s003ap23-test opt]# wget -d -v http://archive.apache.org/dist/tomcat/tomcat-5/v5.5.23/bin/apache-tomcat-5.5.23.zip
Setting --verbose (verbose) to 1
[Code]...
how do I write a workable script that demonstrates that variable expansion occurs before pathname expansion
View 14 Replies View RelatedWhen ever I try to run system-config-samba after the recent update I get the error:
connection.py:630:call_blocking:TypeError: a float is required