OpenSUSE Hardware :: Change Mount Options (permissions) On USB Hard Drive?
Apr 19, 2010
I'm running Opensuse 11.2 and am using a couple of USB hard drives to store large data. One of these drives is formatted with FAT32 and one with NTFS. When I plug-in a USB device KDE4 shows me a little pop-up asking what I want to do with it, I select to open it in Dolphin which of course automatically mounts it.
My question is what if I want to change some of the mount options - is this possible without reverting to manual mounting? And second question is what system does it use to automount - Fedora, Debian and Ubuntu are all deprecating HAL in favour of pure udev, is this the case in Opensuse too?
HALRemoval - Debian Wiki
https://wiki.ubuntu.com/Halsectomy
Features/HalRemoval - FedoraProject
View 9 Replies
ADVERTISEMENT
Jul 17, 2010
You know the great thing about having a debian system is that you have to reinstall so rarely you miss all the new changes that happen in the system until you have to do something like install a new piece of software and realize that fstab has been turned into spaghetti and you no longer have the slightest idea what is going on.I just got a new 1TB USB2 drive to use for backups. I plugged in it and it was recognized fine but it was formatted in NTFS which I didn't particularly want so I reformatted it as ext4FS. It automounts fine but only with all permissions set to root. I tried doing a direct chmod on the drive but that wasn't recognized. Where in the hodgepodge of HAL settings and whatnot do I set it to make the drive user accessible and mount to somewhere other than /media/disk?
View 1 Replies
View Related
Jul 9, 2010
My mac osx hard drive does not boot anymore and I would like to get my important files off before I reformat the hard drive. I have run into a bit of an obstacle -- there seems to be some permissions setting that are barring me from accessing the files I need to. I can see the Machintosh HD and can access some files. How do I change permissions for the entire drive and all it's directories?
View 13 Replies
View Related
Mar 19, 2010
So I have the burned ubuntu CD, and I'm attempting to install it on a system that has one HDD with XP/Vista on it, and another that is completely formatted and unpartitioned. However, when I boot to the ubuntu CD, I can use the menus from the bottom, and select the language when initially prompted, but I can't select any of the menu options except for boot from first hard drive.
View 1 Replies
View Related
Jan 26, 2010
Every time i reboot my computer my hard drive mount points keep changing which means the mount points i've put in the fstab wont work any more.
I'm using the same settings as i had before i upgraded the OS to what it currently is.
Im using fedora 12
My disk 1 for example would be as follows:
before: /dev/sda3
after: /dev/sdd3
View 2 Replies
View Related
Feb 11, 2010
I'm running OpenSuse 11.2. I've got it running mostly the way I want and it connects to my wireless internet no problem. I have a external hard-drive on my Windows machine setup as a share folder. I can mount the drive with:
Code:
mount //10.13.23.2/D /home/james/mnt/win However when I do mount like this it doesn't give my any read/write privliages on the drive. Also on a slightly different issue but still mounting related I have my HDD partitioned into four main drives (not including swap etc). They are my Windows drive, a seperate storage partition formatted for Windows, my main linux drive and a seperate parition for linux storage.
I want to have my Windows drive, my Windows storage drive and my linux storage drive all mounted on boot. I tried adding these to fstab, and they mount fine but again I have no read/write permissions. My fstab looks like this:
Code:
/dev/disk/by-id/ata-WDC_WD2500BEVT-35ZCT0_WD-WXE908AE4273-part5 swap swap defaults 0 0
/dev/disk/by-id/ata-WDC_WD2500BEVT-35ZCT0_WD-WXE908AE4273-part6 / ext4
[code]....
Lastly I would like my Windows Share drive to mount on boot but I have been advised that I would need to write a shell script for this, to do network checks as obviously I won't always be connecting to my network.
View 6 Replies
View Related
Jan 24, 2010
I bought a "WD My Passport Essential 320 GB" usb drive. When I plug it in (suse 11.2 x86_64 gnome version), it won't automount, a message appears ".../dev/sr2 is not a valid block device", I can not mount it manually neither Don't have a clue how to proceed in solving this issue. The drive is a bit strange though, it has some software on it for protecting data, which I wont need, but can't get rid of it neither. However when I connected it to my laptop running ubuntu 9.10 x86_64, the drive automounted ok, so I guess I must be missing some additional software on my suse. The drive was initially NTFS formated, but I did reformat it to FAT with ubuntu.
View 9 Replies
View Related
Mar 28, 2010
i have download openSUSE and can't get it to mount on my hard drive i try and try but it sill won't stay on the hard drive. i like what i see on this os but can't use it.oh the PC im trying to put this os on is a hp m8530f a very good PC at that but i want to use this openSUSE.
View 3 Replies
View Related
Oct 23, 2010
I've added a 1TB hard drive as a second hard drive on my PC, mostly because my home partition is full of music and movies, but I am unsure of where to mount it (or what to mount it as). "Yast Partitioner" suggested /tmp /srv or /localI basically want a storage solution for media files which can be accessed by multiple users (including a windows PC using samba)
View 9 Replies
View Related
Feb 22, 2010
I'm trying to get an external HD to mount on my Dell Laptop running OpenSuse 11.1. When I connect I get the following:
Quote:
dmesg:
usb 1-5: new high speed USB device using ehci_hcd and address 4
usb 1-5: configuration #1 chosen from 1 choice
scsi3 : SCSI emulation for USB Mass Storage devices
usb 1-5: New USB device found, idVendor=0bc2, idProduct=0503
usb 1-5: New USB device strings: Mfr=54, Product=69, SerialNumber=95
[code].....
But am left scratching my head. I don't think its showing up in the etc/mtab - which i think it is supposed to?
View 7 Replies
View Related
Sep 27, 2010
Just installed opensuse 11.3 Kdeversion on my laptop. Before installing it on live mode i had a problem of accessing my other drives (NTFS, FAT32 and EXT4) which said HAL system policy...etc mounting error. I could access all drives with root privilege. I thought problem will be solver once i install opensuse on my system. How ever i was really disappointed after seeing the same problem post install. Googled around for the solution and got this link
[Code]...
After this the problem got worse now i am not able to see any of the drives in the side panel. Gone through many forum and posts all discuss about external USB HDD.
View 9 Replies
View Related
Jan 13, 2010
Here's what i'm trying to do: i have a 300GB IDE hard drive that has a OpenSuse build. I am trying to replicate this HD so that i can have another box similar to the original one...my second drive is 500GB SATA.
So far, I just ran a 'dd' command to copy the 300GB to 500GB. Now, after having read on internet, i realized i need to change fstab & /boot/grub/menu.lst. specifically, we need to change for ex:/dev/disk/by-id/ata-Maxtor_7L300S0_L60LCJ0G-part1 to /dev/disk/by-id/sda1 i did use a Ubuntu LiveCD to access the fstab and changed the line as mentioned above. Now, how do i change the menu.lst?? right now, when i try booting up from this HD, i have issues. specifically, i get this error message: could not find /dev/VolGroup00/LogVol00
View 6 Replies
View Related
Sep 3, 2010
I have a working fstab entry:
Quote:
/dev/sdc1 /media/sdc vfat rw,nosuid,nodev,uhelper=devkit,uid=1000,gid=1000,s hortname=mixed,dmask=0077,utf8=1,flush 0 0
But how do I mount the sdc drive with those options from the command-line without restarting? I've tried to do so with 'mount' utility, but had no luck.
View 1 Replies
View Related
Mar 4, 2010
I want to change the default mount options for removable devices, especially vfat devices, to have shortname=lower instead of the default shortname=mixed mount option. I googled around, and found references to /system/storage/default_options/vfat/mount_options gnome configuration option, but I don't seem to have this option set, actually, I don't seem to have a /system/storage tree in gconf-editor at all. searching in gconf-editor doesn't really yield any results.
View 7 Replies
View Related
May 13, 2009
I have four internal harddrives on my system. On the first HD i've installed Debian 5.0 AMD. I'm trying to write to my other HD to backup my files,but i get a message that this HD doesn't have permision to be writen to. How do i change the permission for Harddrives.
View 3 Replies
View Related
Apr 4, 2011
I am running Linux Mint on my primary hard drive, and I would like to access some folders I have on my second hard drive, which has Windows XP installed on it. However, whenever I try to use these folders, I am greeted with the error message, "The file is not marked as executable." While I know how to set files as executable whenever I am using folders on my Linux drive, whenever I try to set such permissions on my XP folders, I can't seem to make it work. The files revert to their former status, and I'm told that I don't have permission. Should I set the files as sharable from within XP, so that they aren't marked as read-only? Or is there another solution I've missed?
View 8 Replies
View Related
Jul 22, 2010
The issue I am having is that Virtual Box does not recognize my USB drives. I understand that it is related to the fact that Ubuntu cannot recognize the permissions on the USB NTFS drive. So how do I mount the ntfs drive and gain full permissions?
One post suggested that I have to join my user to the 'vbuser' group in users and groups to fix this in 9.04, but I do not have a "vbuser" group in my list of groups. I am running 10.04.
View 2 Replies
View Related
Nov 29, 2009
I've been installing/tweaking F12, and I've found something that I can't say I've ever seen or expected to find before: the contents of my ~/Documents folder has lost its permissions and ownership info. I restored it from a backup last night/this morning, and I've rebooted a few times since then. Other folders from the backup are OK, just Documents.I don't know what my options are. I could try to blow it away and restore it, but that doesn't answer what caused it. If there's a "relabel" or something, that might help... though I've never had to do it before. Could it be that after these two-and-some-change years, my hard drive is giving out? Good thing I have a recent backup... but it'd be a shame to lose all my work getting F12 to work again.
View 4 Replies
View Related
Aug 4, 2010
I just installed a usb card reader for my digi camera...how can I change the permissions from "root" to "user" so I can write to this flash drive?
It reads my pix just fine, but it won't let me write....
it is installed at /media/usb0
View 7 Replies
View Related
Jul 5, 2011
I am having a few security issues with fedora15. they are like i cannot modify any folder in orher partitions of my HDD unless i am a root user. i have tried the GUI approach bt it doesnt help. there are more than a few hundred folders with thousands of files in total. tell me a way so that i can change permissions for one drive at once.
View 4 Replies
View Related
Mar 27, 2011
I'm trying to change the permissions of my external USB drive that i've plugged into my machine. It still reads user root and group root. I've tried chown -R kuier /home/kuiper/file Then chgrp -R users /home/kuiper/file But it still doesn't change permissions. I've also tried editing /etc/group and adding my name to plugdev group. nothing seems to be working?
View 1 Replies
View Related
Jul 10, 2011
I had an old windoz 2003 server running a few recreational web sites. I've grown tired of all the hacking attempts, FTP floods, etc. Ok.. I've grown tired of windoz period.When I set the server up, I had the operating system on one physical drive and stored all of the web files on a separate physical drive just in case I ever wanted to make some changes to the operating system.in my adventurous ways, I've dumped windoz and installed ubuntu 11, 32 bit server edition on this machine. It is running fine from what I see on the server side. The first problem I've noticed is when even attempting to navigate to localhost through the server's web browser, I get a permissions issue.
So... off to the drive where the httpd.conf file points to. This is the second physical drive. When checking permissions and attempting to change them to the correct ones for the folder, I can't change them. I've tried through the GUI and the terminal as root. Neither way will change the permissions.I've stepped back and checked the permissions on the physical drive the files are stored on. I am having the same issues with the drive itself. How in the world can I change the permissions either on the drive or the folder? Is there something I should do as far as the drive's mounting?
View 3 Replies
View Related
Dec 11, 2010
I am using KDE 4.5 and I am unable to mount a hard drive in Dolphin.
I get the error message:org.freedesktop.Hal.Device.Volume.PermissionDenied: Refusing to mount device /dev/sdb1 for uid=1000
The filesystem for the drive that I want to mount is ext4 and the label is "repo"
View 2 Replies
View Related
May 22, 2010
I have a secondary NTFS hard drive in which i can not mount. Here is the output for fdisk -l:
Disk /dev/sda: 320.0 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[code]....
View 4 Replies
View Related
Jul 20, 2011
I'm new to Fedora. Is there an instruction manual. I'm using Fedora 14. I found under documentation a manual for musicians and amateur radio enthusiasts, but not for regular users. I'm using a black widow, which is a holder for hard drives that connects thru USB. I'm trying to mount it. The file system is Ext4.
View 1 Replies
View Related
Aug 24, 2010
I have got 2 hard drives running one one of my computers which i am running as an server. I was using Ubnntu Server which is good but i have decided to change the way that i am going to use the server and have installed Xubuntu over ubuntu server. However in the installation the hard drives shwn when it asked where i would like to install the operateing system. It installed sucessfully and is working but it cant mount my other hard drive which has all of my data on it.
I had tried mounting it throught the command prompt and had no success. After which i have checked if the the toher hard drive is being reconised by Xubuntu and it is as sdb1 but i caqnt mount it and get to my data. I hoped that i can try and put in my ubuntu live cd and see if it can pick the seoncd hard drive up and mount it which it has not been able to.
I have 2 20 gigabyte hard drives atm the moment and i am not adding the others until i can get to all my stuff again form the other hdd.
View 9 Replies
View Related
Oct 22, 2010
id installed ubuntu 10.04 on 160GB hard drive and now i cant see the other hard driveonly ubuntu installed ...
Code:
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
[code]....
View 9 Replies
View Related
Feb 20, 2011
I want to pull a few things off this external hard drive I have that is an ubuntu install from last year. However, my mac won't recognize the file system and mount it so I can pull the few files I need off of it.
What's the trick to getting a mac to find an ubuntu hard drive?
My other option is removing my laptop hard drive, installing the ubuntu one, opening ubuntu manually, burning the information I need to a CD, or a usb key, and then removing the ubuntu hard drive, and reinstalling my mac osx drive to the laptop bay.
View 7 Replies
View Related
Jun 18, 2011
I'mm trying to mount a hard drive in Ubuntu but it doesn't work i typed the following commands
Code:
cd ../..
sudo mkdir /media/windows
sudo mount /dev/sda /media/windows -t ntfs
and then it says
Code:
Error opening '/dev/sda': Read-only file system
Failed to mount '/dev/sda': Read-only file system
i wanted to access my files, not write to it, so is there anyway to mount as read only?
View 9 Replies
View Related
Apr 18, 2011
how do i make /mmt is the mount point to my hard drive, and how do i mount hard drive? thank you i'm very new to linux.
View 3 Replies
View Related
