If I try to copy a file onto a NTFS partition in Linux, I get a warning message Could not change permissions for <file-name>. Is there any way to suppress this message ? I can live with this message while I copy the files in terminal, but when transferring from Dolphin a modal dialog box is shown and it gets pretty irritating. I'm using openSUSE 11.2, on KDE 4.4 RC.
View 4 RepliesI need to suppress the error message when the command is not working. I have given like below, command_name 2> /dev/nullBut it is not working in Red Hat Linux release 9.
View 1 Replies View RelatedHow do I change folder permissions without changing the permissions of the files within the folder?
View 6 Replies View RelatedKMail 1.11.4, KDE 4.2.4: I'm migrating from WinXP to Mandriva, and installed KMail at the weekend. Works fine, but I have a niggle - the message list displays headers grouped by month order. I'd like the option of having a simple list (no groups), and suspect that it could be done - but I haven't been able to find out how. I've checked in the Handbook without success, and a search in LQ hasn't turned up anything yet.Any suggestions gratefully received. If this isn't the right place for a KMail query,
View 1 Replies View RelatedFinally I managed to install my printer/scanner drivers.The last thing I need to do is to add the following two lines to 40-libsane.rules (which is a read only file):# Brother scanners ATTRS{idVendor}=="04f9", ENV{libsane_matched}="yes".How can I change permissions for this file or add these lines without changing permissions?
View 2 Replies View RelatedHow do I set all *.java files in the current directory and all its sub directories to have read permission to all users?
I also want to set all files of at least 1 kilobyte in size in the current directory and all sub directories to have a group of admin.
I am having a USB disk.I want to change the permissions of folder on it from 700 to 755 (and all subdirectories in it)ls -l showstotal 26Quote:
drwxrwxrwx 2 tkmsr tkmsr 2048 2010-02-12 04:12 HPLAUNCHER
drwx------ 7 tkmsr tkmsr 4096 1970-01-01 05:30 vol1
drwx------ 1 tkmsr tkmsr 20480 2011-01-03 17:43 vol2
[code]...
While playing with my Linux box, I edited rc.sysinit in /etc/rc.d/ folder. But now when I boot into run level 3 or 5, I get complain that system cannot run /etc/rc.d/rc.sysinit. I boot into run level 1, and checked its permissions, which is rw-r--r-- . It should be rwxr-xr-x. I tried to use chmod to change its permissions, but it responded that "Read Only file system" Now how can I change its persmissions when in run level 1. In run level 3 and 5, machine does not boot. My box has Fedora Core 2 with kernel 2.6.20.
View 3 Replies View Relatedi have an ntfs mount that i wish to change permissions of individual directories.i have mounted many ntfs volumes successfully, mounting is not the issue. the issue is that when mounting, i need to specify 'blanket' permissions, owner, group etc. i have no idea how to change permissions for individual folders.
View 2 Replies View RelatedI'm trying to change the permissions of my external USB drive that i've plugged into my machine. It still reads user root and group root. I've tried chown -R kuier /home/kuiper/file Then chgrp -R users /home/kuiper/file But it still doesn't change permissions. I've also tried editing /etc/group and adding my name to plugdev group. nothing seems to be working?
View 1 Replies View RelatedI was unable to change the permissions for root node and for other users also. WE have tried all the possibilities like chmod and chmod -R 777 filenem. But we are unable to change that.
View 4 Replies View Relatedany way to change file permissions of NTFS drives? All my C programming files resides in a NTFS drive and I need to set execute permision on them in order to run. I tired chmod -Rv 777 /media/Programming. and also tired chmod 775 *.* after entering the folder in which all my files resides. but both these commands doesn't seem to have any effect on the files. I know NTFS doesn't use Unix file system and chmod command goes in vain.
View 5 Replies View RelatedI finally replaced my Windows with Linux.. However, I need to run applications and modify files that are on NTFS mounts. I am unable to change ownership, permissions, and groups on these files so I may modify them without having to copy. I have several times attempted to chmod, chgrp, chown, etc.. while logged-in as root user; however it is to no avail. The owner and permissions are still geared towards root. can I change ownership and permissions on NTFS files so I can modify them without having to convert/copy them over to ext4 or different file system?- Matbtw: I am using OpenSuse 11.4 and running Windows apps with VirtualBox (with Vista installation image). I still have Win7 on my computer (non-emulated) and I would like to keep some files on those NTFS partitions so when I occasionally need to boot into Win7 I can modify those files because Windows blows and doesn't support Linux.
View 5 Replies View RelatedI've checked out a subversion project with source c++ files in netbeans 6.8 on Red Hat 5.5. My machine has a dual boot with windows xp and RHEL 5.5 so I checked out the project on a folder called winshare which is a shared drive/partition (E: under xp) allowing both operating systems to access the contents. I've Fedora as virtual machine on xp and wanted to be able to work on the source seamlessly whether using fedora or RHEL.
Problem is that Netbeans is able to build the source just fine but I can't seem to run the generated executable. It has -rw-rw---- permission and the owner is the same user logged in (let's say user1) but no matter what I do, whether I change permissions as user1 or root issuing command chmod 777 -R /dir/where/file/is does not have any effect whatsoever on the executable as well as any .cpp or .h files (nothing that I need exectue permissions on .cpp but just to make a point).
My system (CentOs5.3) became erratic after i tried to change wholesale the ownership of the /FS. is it possible to change ownership or rwx permissions of files in linux? what is the safeguard available to preserve the consistency of the program files in linux against such an attempt by su?
View 2 Replies View RelatedI'm using Thunderbird 3.x on Ubuntu (Linux). When I save an attachment to my computer, the file gets saved with only the owner (me) having read/write permissions. In other words, the file gets saved as -rw
Frequently, I want my group to have permission, or to give read permission to everyone. Is there a way to do change Thunderbird's default file permissions so I don't have to do this manually every time?
I have a NTFS drive mounted at /media/bigbrother as my user. I have no trouble reading or writing to files here. I just created a link to /var/www using: ln -s /var/www /media/bigbrother/
The link is there however, I can't even open the folder. How should I go about getting access. So that I'm able to copy files from other systems on the network.
I have a Qnap 219p NAS to which I have connected a USB external harddrive. I can access the external harddrive from my windows box using the network share, but at first i couldn't access the folders. The permissions set in the NAS GUI for the external drive is correct and are identical to the permissions set to the 2 internal drives.
I ssh'ed to the nas and used 'chmod -R 770 /share/external/sds1' - this granted me access to the folders, and some files. I can open all files in the root, but if I go just 2 folders 'deeper', i can't open the files in this folder, and in the folders after that.
In ssh, if i navigate to the folder wher I cannot open the files and use 'ls -l', i can see that the permissions (770) hasn't been applied to these files. How can I get chmod to apply the 770 permission to all files, folders, subfolders and files in subfolders etc., without having to chmod every folder one by one?
I work with this travel company that host sites for different agents. They have ALL the sites in one directory and each site has its own search.php file. How can I locate, and change all the search.php files permissions to 644 in one shot? Is this possible maybe with the find command? I read the man page for this but I am not sure how to write out the command.
View 3 Replies View RelatedIm trying hard to get familiar with Linux Ubuntu and Im a bit comfused on one thing. Why can I run an Open Office doc just by clicking and in terminal a have to change the permissions to run it even as a root?I thought that in graphic mode Im the actual root no? And so when I run the terminal I should be still the root no?
View 4 Replies View RelatedHere is my fstab's content:
/dev/sda7/media/entfsdefaults00
/dev/sda8/media/fntfs-3g silent,umask=00000
[root@localhost code]# ll 2
-rwxrwxrwx. 1 root root 0 Mar 2 20:19 2
[code]....
My mac osx hard drive does not boot anymore and I would like to get my important files off before I reformat the hard drive. I have run into a bit of an obstacle -- there seems to be some permissions setting that are barring me from accessing the files I need to. I can see the Machintosh HD and can access some files. How do I change permissions for the entire drive and all it's directories?
View 13 Replies View RelatedI own an Acer Aspire One which has Linpus Lite installed. Last night I attempted to delete a couple of files only to find they are read only and that I cannot change the permissions by right clicking and changing the drop down menu from read only.
These aren't protected files or anything, they are files I've downloaded or created myself (one using the onboard web cam to test it).
I attempted to play with Terminal for a bit but as a newbie I got easily lost, not like I can fall back on command prompt knowledge from Windows!
I think it's somehow connected with the user which accesses these docs or tries to change the permissions. I also tried with an su- which meant I was using Terminal as root, however, I wasn't sure how I could then set the permissions for a particular file/folder within the file system.
i am trying to write a script that does the following..1. checks if a directory exists2. changes permisssions of the directoryi have written a script but it returns a message to say that the specified directory does not exist (but it does).my question is how to i search the entire file system as directory could potenially be anywhere. would cd or su be of any use here.
View 4 Replies View RelatedI'm new to Ubuntu Linux but have many years on windows platform. Please can someone help me with how to change the following items.
No.1 I would like to change the HORRIBLE!! YAK!! brown background color behind the word Ubuntu in the start up screen when the machine loads up (before the login). I have located the image file for this which I have found to be: /usr/share/images/xsplash/bg_2560x1600. jpg but the OS says that root is the owner and that I don't have permission to change this. So how can I change this for a color I do like.
No.2 I would also like to change the login dialogue screen style. I know this is possible but again I'm fumbling to see how I can do this. I have tried with the start up manager but every attempt fails, the settings don't take. Once again I suspect permissions are at the bottom of the problem?
No.3 Would like to have a colorful splash screen image on boot up, I've managed to remove the old one (small white 3 ring ubuntu logo on black background) but havent been able to install or replace with a new one. Its been incredibly frustrating, I'm feel sure I'm missing something simple here. Wondering if its permissions yet again?
Anyone who can offer help on any of the above, guidance or advise me would be much appreciated. Please bear in mind that I'm still very much feeling my way with Linux so keep it simple.
If this information excists here so sorry I was not able to find it. How to change permissions in Unbuntu for those people who are trying to change persmissions in a subdirectory.
Open the terminal and then type: Quote: sudo chmod yourpermission number /thenameofyourdirectory
Example:
Quote: sudo chmod 755 /directory
I use a local repository for ubuntu and when i use update manager it always shows gpg warning and shows that the information is out of date. Is there any way to suppress this warning. ( In Ubuntu 9.10 ) , so that update manager never compain about the local repository.
View 1 Replies View RelatedI use Ubuntu 10.04 and I want to be able to move around the system without having to frequently enter my password. For example, when waking up the system from a power save state or when accessing Synaptic Package Manager I do not want to be asked to enter my password. There is nothing on my system that matters if its security is breached. Is there a way to turn off these requests for a password?
View 9 Replies View RelatedI had to register with a new username, because I could not remember my logon details and have since changed ISP so could not get details sent, anyway that aside to the problem.
I upgraded to 11.04 and all went well (hence posting here and not in the Upgrade section) and it is running fine, well until yesterday.
I ran the update manager as I usually do when first entering Ubuntu and it did an update but then gave me an error message about file permissions and to check my connection (which was connected OK).It has also affected the Software Installer, and now I can not install any new software.
Is this a generic problem with the latest update or is it just my Dell Inspiron 1545 please?
my iwlist scan is normal. ethernet connection ok, wirless not working but does seem to receive. wifi radar lists my router ssid. Does this say I have the correct router for my wireless is my question? I am also getting this error message with this system on KDE, LENNY. From KWLAN a wpasupplicant front end.
"you do not have permissions to start pppd or pppd was not found. Dial up networking will not work."
[code]...