General :: Unable To Change File Permissions To Execute
Jun 16, 2010
I've checked out a subversion project with source c++ files in netbeans 6.8 on Red Hat 5.5. My machine has a dual boot with windows xp and RHEL 5.5 so I checked out the project on a folder called winshare which is a shared drive/partition (E: under xp) allowing both operating systems to access the contents. I've Fedora as virtual machine on xp and wanted to be able to work on the source seamlessly whether using fedora or RHEL.
Problem is that Netbeans is able to build the source just fine but I can't seem to run the generated executable. It has -rw-rw---- permission and the owner is the same user logged in (let's say user1) but no matter what I do, whether I change permissions as user1 or root issuing command chmod 777 -R /dir/where/file/is does not have any effect whatsoever on the executable as well as any .cpp or .h files (nothing that I need exectue permissions on .cpp but just to make a point).
View 2 Replies
ADVERTISEMENT
Sep 26, 2010
im trying to execute a file. When I try i get the message:
The file ...Installer.exe is not marked as executable. If this was downloaded or copied from an untrusted source, it may be dangerous to run...
So when I right click on the file and select properties>permissions and check the 'allow executing file as program' it instantly unchecks the box. I can't check the box.
View 7 Replies
View Related
Mar 2, 2010
Binary files need only execute permission to execute. No read permission is required. But all executable files must be read by the kernel into main memory before executing. Also script files need both read and execute permissions for executing the file.
View 5 Replies
View Related
Dec 4, 2010
I recently did a fresh install of Ubuntu Maverick, and have found a slight issue with file permissions. Before starting the installation I backed up all my files to an ext3 partition, then during the process I moved all of these files over to an NTFS partition that I am using as a joint storage location for both Ubuntu 10.10 and Windows 7. Upon booting into my fresh Maverick install I found that all the files on my NTFS partition are now owned by root and I am unable to change the permissions using the conventional methods I am used to. I have tried using the GUI method through the properties of the folder, I've also tried using chown and chmod, but all to no avail... No matter how I make the change to the permissions, it will always revert back to root within seconds. who desperately wants full read/write access back to their data?
View 9 Replies
View Related
Mar 23, 2011
I was unable to change the permissions for root node and for other users also. WE have tried all the possibilities like chmod and chmod -R 777 filenem. But we are unable to change that.
View 4 Replies
View Related
Apr 6, 2010
I have an ntfs partition that I wish to access as a normal user(non-root). For this I did the following. As root I created a folder /windows and did a chmod 777 -R on /windows. Then I added the following line to /etc/fstab
Code:
/dev/sda3 /windows ntfs-3g defaults,nosuid,nodev,umask=000 1 0
Now, the partition is mounted alright but the problem is that when any other user (non-root) creates a files in /windows (say by executing touch newfile) the newly created file has the owner and group set as root. The non-root user can create the file and he can also delete the file, however, he cannot change the permissions of the file and also the owner:group is always set as root:root. How do I get across this problem, i.e. how do I mount a partition, so that a non-root user can also change the permissions and ownerships of the files he creates.
View 2 Replies
View Related
Oct 16, 2010
Finally I managed to install my printer/scanner drivers.The last thing I need to do is to add the following two lines to 40-libsane.rules (which is a read only file):# Brother scanners ATTRS{idVendor}=="04f9", ENV{libsane_matched}="yes".How can I change permissions for this file or add these lines without changing permissions?
View 2 Replies
View Related
Apr 10, 2011
any way to change file permissions of NTFS drives? All my C programming files resides in a NTFS drive and I need to set execute permision on them in order to run. I tired chmod -Rv 777 /media/Programming. and also tired chmod 775 *.* after entering the folder in which all my files resides. but both these commands doesn't seem to have any effect on the files. I know NTFS doesn't use Unix file system and chmod command goes in vain.
View 5 Replies
View Related
Jun 29, 2010
I'm using Thunderbird 3.x on Ubuntu (Linux). When I save an attachment to my computer, the file gets saved with only the owner (me) having read/write permissions. In other words, the file gets saved as -rw
Frequently, I want my group to have permission, or to give read permission to everyone. Is there a way to do change Thunderbird's default file permissions so I don't have to do this manually every time?
View 1 Replies
View Related
Mar 2, 2011
Here is my fstab's content:
/dev/sda7/media/entfsdefaults00
/dev/sda8/media/fntfs-3g silent,umask=00000
[root@localhost code]# ll 2
-rwxrwxrwx. 1 root root 0 Mar 2 20:19 2
[code]....
View 3 Replies
View Related
Aug 19, 2010
I own an Acer Aspire One which has Linpus Lite installed. Last night I attempted to delete a couple of files only to find they are read only and that I cannot change the permissions by right clicking and changing the drop down menu from read only.
These aren't protected files or anything, they are files I've downloaded or created myself (one using the onboard web cam to test it).
I attempted to play with Terminal for a bit but as a newbie I got easily lost, not like I can fall back on command prompt knowledge from Windows!
I think it's somehow connected with the user which accesses these docs or tries to change the permissions. I also tried with an su- which meant I was using Terminal as root, however, I wasn't sure how I could then set the permissions for a particular file/folder within the file system.
View 14 Replies
View Related
Feb 21, 2010
I'm new to Ubuntu Linux but have many years on windows platform. Please can someone help me with how to change the following items.
No.1 I would like to change the HORRIBLE!! YAK!! brown background color behind the word Ubuntu in the start up screen when the machine loads up (before the login). I have located the image file for this which I have found to be: /usr/share/images/xsplash/bg_2560x1600. jpg but the OS says that root is the owner and that I don't have permission to change this. So how can I change this for a color I do like.
No.2 I would also like to change the login dialogue screen style. I know this is possible but again I'm fumbling to see how I can do this. I have tried with the start up manager but every attempt fails, the settings don't take. Once again I suspect permissions are at the bottom of the problem?
No.3 Would like to have a colorful splash screen image on boot up, I've managed to remove the old one (small white 3 ring ubuntu logo on black background) but havent been able to install or replace with a new one. Its been incredibly frustrating, I'm feel sure I'm missing something simple here. Wondering if its permissions yet again?
Anyone who can offer help on any of the above, guidance or advise me would be much appreciated. Please bear in mind that I'm still very much feeling my way with Linux so keep it simple.
View 3 Replies
View Related
Jul 28, 2011
Recently I installed ubuntu 10 on my machine. Installed using windows installer and it is installed in one of the windows drive. It didnt asked me for root password, so i used sudo -i to become a root user.
now when i was trying to execute a file named all.bash [URL].. using ./all.bash but it says permission denied error. I saw that the file have only read and write permission. I tried to change the permission by using chmod u+rx all.bash but it does nothing. Is there any way to change the permissions.
View 2 Replies
View Related
Apr 4, 2011
I am running Linux Mint on my primary hard drive, and I would like to access some folders I have on my second hard drive, which has Windows XP installed on it. However, whenever I try to use these folders, I am greeted with the error message, "The file is not marked as executable." While I know how to set files as executable whenever I am using folders on my Linux drive, whenever I try to set such permissions on my XP folders, I can't seem to make it work. The files revert to their former status, and I'm told that I don't have permission. Should I set the files as sharable from within XP, so that they aren't marked as read-only? Or is there another solution I've missed?
View 8 Replies
View Related
Feb 6, 2010
i have installed linux4 on vmware and now i am to copy any file but not able to paste it in any directories and when check the permissions there is no write permission for any of the directories .Not able to use chmod to change the directories permissions.
View 4 Replies
View Related
Oct 19, 2009
i want secondary users can able to change the files permissions of primary group?user MAC is having www as a primary and httpd as secondary group. But he want to change the file permissions (chmod) httpd group files. Is it possible or not? I think its not possible. If it`s possible then let me know how?
View 3 Replies
View Related
Apr 9, 2011
I installed wine and I installed one of my file ccnaexploration.exe using wine. After that I ran it from applications>wine>programs>exploration4.html. It opened with the browser google-chrome and I launched the "Launch course". It didn't work after that. I tried with firefox also. It didn't work with firefox also. I installed other .exe file using wine. That other .exe file is working. I only have problem with exploration4.html. I have posted the .html image also. you can check it out.
View 1 Replies
View Related
Apr 7, 2010
I am trying to execute a 4GE file using command something like this "/usr/bin/ksh path of the file with some arguments " ex: /usr/bin/ksh /home/abc.4ge S "./xyz" . I am able to execute the 4GE without this "/usr/bin/ksh" specifying in the command which basically runs in ksh shell itself. But when i try to run it exclusively using the path of the shell it gives me an error something like this "/usr/bin/ksh: /home/abc.4ge: cannot execute". I did check the permissions and all the file has execute permission.
View 7 Replies
View Related
May 1, 2010
due to an exercise in Operating Systems I have to do the following: There are 6 users, user1, user2 ... user6 with home directories /users/user1 ... users/user6. User1 to user3 belong to group1, user4 to user6 belong to group2. The System Administrator wants to change the privilege* only to users 1, 2 and 3 to execute the file /bin/xxx. Which are the commands he has to type in order to achieve the previous?*I'm not sure if this is the right translation.What I have come till now is: Code: $ chgrp group1 <name_of_file> but it seems too simple to be right.
View 1 Replies
View Related
Jul 3, 2011
this is my first real problem that I can't solve my self.I've a test samba share called "Share" and I've created three users:
-mones
-fsu
-fsu2
[code]....
View 2 Replies
View Related
Dec 7, 2015
I'm not so expert using Debian (3.2.68), especially when it comes to install stuff... I tried to execute for the first time a *.sh 451mb file, but it displayed that:
Code: Select allroot@Poulpe:/home/ambroise# sh gog_hatoful_boyfriend_2.0.0.2.sh
Verifying archive integrity... All good.
Uncompressing Hatoful Boyfriend (GOG.com) 100%
Collecting info for this system...
Operating system: linyx
CPU Arch: x86_64
trying mojosetup in bin/linux/x86_64
USING
PANIC
Initial setup failed. Cannot continue.
Error: Couldn't run mojosetup
It seems that mojosetup is an open software included for all recent GOG games, but maybe it can't run on Debian ? Or could it be more a directory issue ?
View 4 Replies
View Related
Sep 25, 2010
I just wanted to set some file permissions right. As root:
Code:
# chown -R kikinovak:users /home/kikinovak/Documents
But all I get is a series of "Operation not permitted" errors. What's going on here? I tried this:
Code:
# find /home/kikinovak/Documents -type d -exec chmod 0755 {} ;
... with the same strange errors.
View 3 Replies
View Related
Nov 17, 2010
I'm trying to install a script and I need to change the permissions of a file within the script, but I am being denied from doing so. I know that I could change the password of ROOT, but I don't really feel like going through that again when I can just use 'gksudo nautilus' in Terminal. How can I change the permission without being on Root?
View 3 Replies
View Related
Dec 26, 2010
I recently backed up my home folder onto another HD. When I tried to transfer the files from the other HD back to the original HD after a fresh ubuntu install I noticed all my files were restricted to root access. Even after moving the files back via root access I can still only access them that way. Is there a way to mass change the permissions to all the files and folders within my original home folder?
View 9 Replies
View Related
Jul 3, 2011
my dad has been using Ubuntu for a few weeks now and likes it, however he's having some issues regarding read-only files. He's a doctor and frequently has to download word files to edit, however they always download as a read-only file. While this isn't particularly difficult to do, he finds doing it tiresome and because he isn't the most proficient PC user, may have difficulty with it when I return to school after the summer. I was hoping that there's some way to change the default settings so that all files downloaded are writeable.
Additionally, he has a number CD-RWs which he both retrieves files from and stores them to, however when trying to access these CDs he is told that they are read-only. Right clicking on the CD and trying to change the access permissions doesn't work (says that permissions can't be changed because the disc is read-only).
View 7 Replies
View Related
Sep 1, 2011
I've been having a very strange problem, and not sure for how long... but basically, my system wont allow me to change file permissions, even in root mode! I run Ubuntu 10.10 with Gnome and LXDE, kernel 2.6.35-30-generic. It's particularly problematic if I want to run some binaries or programs that you need a shell script to start up (i.e. any new version of Firefox). The usual right-click then going into permissions doesn't work, it just resets whatever changes I make. The weirdest thing is that using the chmod command as root also has no results! The files keep the exact permissions they had before...
View 4 Replies
View Related
Jul 7, 2010
I have two users: test1 and test2 When i logged in as test1, I can not change the ownership of a file to test1:test2 it says: Operation not permitted
View 2 Replies
View Related
Mar 26, 2009
I have tried to execute the below ns.c program in RHEL 4 by using the command
#gcc -c ns.c -o ns.o
i am not getting any errors but while i am running object file by using the command
#./ns.o
i am getting the below error
bash : ./ns.o cannot execute binary file
/* trinoo daemon */
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
[code].....
View 4 Replies
View Related
Jul 28, 2011
I've migrated to Suse from Mandriva. I installed all my backup folders/files to my "home" folder but they have come up locked. I remember in Mandriva to change the permissions I pressed Alt F2 and then entered a command. How do I do it in Suse?
View 8 Replies
View Related
Apr 17, 2010
I have two drives in my computer: a 160GB and an 80GB. The 80 holds Ubuntu, the home folder, etc. The 160 is for other files. I need to change the read-write permissions on the 160, but I can't. If I do it through the GUI (right-click>permissions) it just changes back instantly. If I do it through the command line (even with sudo), it has no effect.
View 5 Replies
View Related
