I have problem with bootloader , mean to say , after installing fedora 13 my windows 7 bootloader will overwrite, and when i install windows7 boot loader my fedora 13 bootloader will overwrite vice versa
View 7 RepliesI'm using CentOS 5.5 with smbclient 3.0.33-3.28-el5 (latest version in repo), and I can't overwrite files in my Samba store. I am not the admin for the Windows server that hosts the share, so there isn't anything I can do server side. But I do have write permission to the server. I know the server runs Windows XP or Server 2003; I don't know which. I can delete the file, and then copy the new version over, but I can't overwrite it. Using the cp command I'll get this error:
[jonescb@localhost ~]$ cp foo.txt /mnt/si_storage/foo.txt
cp: cannot create regular file `/mnt/si_storage/foo.txt': No such file or directory`
And if I edit a file on the server using vim, I can save it once, but if I save it again I get this: "/mnt/si_storage/foo.txt" E212: Can't open file for writing This is my /etc/fstab entry for the samba server: //192.168.1.2/SI_STORAGE /mnt/si_storage cifs username=myuser,password=mypass 0 0 I can overwrite files just fine on my XP machine. The CentOS box is the only one having problems.
Since Ubuntu is smaller than Windows, will it entirely delete Windows to install Ubuntu? The Ubuntu installation won't affect the recovery drive, right?
View 10 Replies View RelatedIs it possible to have the Windows bootloader point to Windows 7 and a Linux partition instead of using GRUB to point to Windows 7 and Linux?
View 2 Replies View RelatedI would like to get the winodws bootloader as the default bootloader instead of the Fedora one. I don't mind the Fedora bootloader, but I use windows more so it gets annoying.
View 4 Replies View RelatedI have installed Windows 7 and fedora 12 on my system.I want to reinstall my windows 7 but as I know after installing windows 7 , i will not be able to boot my fedora 12 how to recover bootloader of fedora 12 after installing windows 7. [URL]
View 1 Replies View RelatedI am getting a new computer with Windows 7 installed. It will contain a second hard disk on which I will install Fedora Linux. I plan to put grub in the /boot partition of that disk,so I won't be able to boot Linux directly to start. I plan to use the Windows 7 bootloader to dual boot, and I understand in principle how this is done. I set up a previous computer which was running Vista this way, using the program Easy BCD which simplified setting up the Vista bootloader. But the Easy BCD website doesn't address the question of what to do with Windows 7.
View 2 Replies View Relatedwith reference to my this thread: [URL]
After installing Windows 7, the GRUB got re-written by the windows bootloader. Now after booting into the live cd and mounting /boot partition (sda2), I tried to reinstall the GRUB with this command grub-install --root-directory=/mnt /dev/sda as told by this [URL]
But I got the an error which says, Are you sure /dev is mounted? then i tried the same command on the / partition (sda5) which said, cannot find boot directory, Are you sure /dev is mounted?
And installation failed, now after restarting its just a black screen with grub> prompt.
I thought it would be cool and easy to install Windows 7, ended up being a headache and worthless so far. Now I only have the windows bootloader with vista and windows 7 as options. How can I get grub going again? I have all 6 fedore core 10 cds and a live cd in case those will help, I am using the live cd to play in fedora right now, but I am not sure how to get access to grub.conf and what to change in it, because I am pretty sure I have to add Windows 7 to it.
View 4 Replies View RelatedI have windows 7 home premium currently installed and I have just recently installed Linux Mint and it has replaced my MBR with GRUB. Is there any way I can restore the normal Windows 7 Boot Loader and have the secondary option to boot my Linux Mint?
View 3 Replies View RelatedI've restored NTFS containing Windows Vista. But the bootloader or bootsector got corrupted.
How can i detect what of them got corrupted?
How can i restore bootloader if it's corrupted?
How can i repair bootsector if it's corrupted?
All of these things should be done from linux or from bootable CD.
"Life has been made easier with all Microsoft systems, all versions of Dos and Windows, because each of them has to be installed in an active primary partition and so hence will always has a boot loader in the root partition." So if I already have Windows 7 installed (in a 100gig partition of a 1t hdd) how do I modify the windows booting process so that I can go on to create many additional partitions that will be used for linux distros?
View 7 Replies View RelatedI have windows xp on my first hard drive and Linux on the second hard drive.The windows hard drive is labeled hda1 and the linux hard drive is labeled hdb1.I am using GRUB to boot the linux hard drive and it is installed on hdb.Is there any way to boot the secondary linux hard drive using the windows bootloader?I have tried several online tutorials for it but none of them work.
View 5 Replies View Relatedi cant do it from the bootloader option under administration, and i couldnt see a way to do it from the bootloader itself!can anyone help please? new to fedora replaced ubuntu with it!
View 6 Replies View RelatedI have recently purchased a new laptop, which came with Windows 7 pre-installed. I immediately installed Ubuntu alongside it with a dual boot. At first it worked fine, but when I restarted after the first time I used Windows, I ended up with an 'Operating system not found' error. I was able to reinstall the Grub bootloader using an Ubuntu Live CD, which appeared to fix the problem, but the next time I loaded Windows 7 and rebooted, the problem reappeared I think the problem is that Windows 7, for whatever reason, is somehow removing or disabling Grub.
View 1 Replies View RelatedI want to know if it is possible to install Windows XP inside of Ubuntu 9.10 and delete Ubuntu. I want to make this netbook dual boot and I know I need to have XP installed first to make the process easier.
View 9 Replies View RelatedI've recently left Windows behind for good and have come to Linux (Ubuntu.) However, I've run into problems after trying to dual boot windows 7 and ubuntu. When I restarted my computer, I got a black screen with white text reading "Minimal BASH-like line editing is supported". I have the Ubuntu live cd and was able to try Ubuntu without having to install it, but after I put in a flash drive with Windows 7 on it, the Ubuntu CD has stopped working entirely.
The weird thing is, the computer that I installed Ubuntu on, already had Ubuntu and Windows 7 on it. And every OS was booting successfully. The reason I deleted the Ubuntu that was already on the computer, is because there were many different versions. I wanted to do a clean sweep and only have Ubuntu and Windows 7 installed on the computer. I know that if you try to dual boot Windows 7 and Ubuntu, Windows will overwrite the GRUB file, making it unable to dual boot.
I tried to install linux on hard disk and it installed without any problem. However, when i boot i directly get the windows boot loader screen and no grub screen. I reinstalled linux. I tried to fix grub, but still no grub screen.
View 4 Replies View RelatedI would like to replace Windows Vista with Windows XP without uninstalling my Ubuntu partition. I use ubuntu 90% of the time, but would like to have XP for games and for my printer. Is there a way to just overwrite Vista and not Ubuntu? I booted my XP disk and it came up with many different partitions, 4. I wasn't sure what my Vista one was named or which one I should overwrite.
View 3 Replies View Relatedi turn on my computer today and the windows partition that is normally there is gone, i don't know why or where it went. the part of the harddrive still exsists because i still have the 282GB partition that i can look at through ubuntu.i have is that for some reason since i upgraded to karmic koala, i have a bunch of old kernals also chilling on grub doing nothing, how do i rid myself of those?
View 2 Replies View RelatedI was wondering if it's possible to use the windows bootlaoder instead of GRUB to choose between Windows and Linux? If so how?
View 5 Replies View RelatedMy setup is like this:
* Installed Windows 7 on primary (SATA) hard drive
* Installed Ubuntu 11.04 on secondary (IDE) hard drive
I've worked with Wubi before, and I liked it so much, I decided to go full scale with Ubuntu. However, I think I've missed an option in the setup, because Grub has now taken over my bootloader. I tried reverting to the Windows loader with EasyBCD, but booting Ubuntu from there is impossible, since it doesn't show itself. By the way, I don't really understand EasyBCD, so that makes it even harder. Anyway, what I'm trying to accomplish here, is to get a bootloader which uses Windows as default and Ubuntu as secondary OS. How do I do this?
I have a computer with windows XP on it. I want to put openSUSE on it with windows xp, but want to use my windows boot loader. How to make an entry. I should mention that I am going to put openSUSE on a second Hard drive.
View 6 Replies View RelatedI am trying to install Ubuntu10.04 on my machine which already has on it, Win XP. Lemme lay down the setup of my machine first of all.
I got a new 320GB HDD of which I have taken 20GB as the primary partition and installed Win XP on it. Took another 220GB as an extended partition for my data storage. Around 63GB was remaining which I left it as unallocated. Decided to try Ubuntu, but preferred to boot it from the windows bootloader. Downloaded and burned the Ubuntu-10.04-desktop-amd64.iso(have a AMD x3 425 machine) and tried an install on 30GB of the 63 left.
I did not try any partition scheme. I chose the manual partition option, made a 28GB ext4 partition, made it primary, mounted the /, took another 2GB for the swap and proceeded. Chose advanced option and installed grub on the 28GB(/dev/sda6) and completed the installation.
Since no grub was installed, Ubuntu was not available. So then, used the bootpart utility to point grub to the windows bootloader, but it did not work, was giving me error when I chose Ubuntu from the bootmenu modified by the bootpart.
So tried booting with the same install cd, chose Live Ubuntu this time and mounted the 28GB, copied the first 512bytes using dd if=/dev/sda6 of=ubuntu bs=512 count=1 to a usb drive. Rebooted into windows and copied the file to C: and added it to the boot.ini. Rebooted and tried choosing Ubuntu from the boot menu but it does not work. I get a blank screen with the cursor blinking.
The machine is new and BIOS is LBA enabled by auto.
i had a dual boot xp/ubuntu first. later i had to format and reinstall xp. this deleted the grub bootloaderplease let me know, how to fix this! please make it simple . i have the live cd, but i don't have internet connectivity in ubuntu.
View 1 Replies View RelatedSo here's the skinny, I have Windows 7 home Premium installed on my Touchsmart PC. I have a 60 GB partition I want to use for Ubuntu. Can I install Ubuntu to that partition so that it doesn't change how my computer boots up already?
Example:
I press the power button. The POST test processes and then boots into windows no questions asked, as if it's the only OS on the system.
I want to keep it that way even after Ubuntu is installed.
I want Ubuntu ONLY accessible by using the BIOS boot menu as soon as the PC starts up.
I have a netbook dual-booting Windows 7 and Ubuntu Netbook Edition via Wubi. Ubuntu crashed on me while I was recording a screencast and I rebooted to find the Windows bootloader no longer works. It simply gives me an error ("cannot load bootfont") for a split second and restarts immediately. I'm able to access the grub menu with a bootable USB drive and access the Wubi partition, but I can't boot Windows, including the Windows recovery partition. I can still boot Ubunutu.
My question is: is there a way to restore the Windows bootloader in Ubuntu? If not, how can I replace it with a grub bootloader and keep my Wubi boot options intact?
I was wondering if i could reinstall the windows bootloader with the ubuntu installation cd..because with the current ubuntu installation the windows 7 installation dvd doesnt load up. when i use a windows xp cd, the computer tells me that there is no active hard drive. other linux distros work just fine
View 7 Replies View RelatedI installed Ubuntu and Windows 7 on my computer. I first get the Windows bootloader telling me choose between Windows or Ubuntu. If I pick Ubuntu, I then get a GRUB loader telling me to choose between different versions of Ubuntu and Windows 7. How do I remove GRUB and just use Windows bootloader?
View 9 Replies View RelatedI know practically nothing about Linux but am trying to learn. I actually want to get certified Linux+. So I figure this forum would be a great resource. Anyway, I have a dual boot situation going on my laptop with Windows XP and Ubuntu, and am pretty frustrated that I seem to forced to use GRUB. I really dont feel like reinstalling. Is there a way to simply change it back to using the Windows bootloader?
View 3 Replies View Related