I used the standard disk utility on another 2.6.x Ubuntu desktop to encrypt a USB device. Can I access this through a similar VM on a Mac OS X host?
I don't have any problems accessing normal USB devices on the VM, but when I insert the encrypted one, I get an error message saying that it can't be mounted.
How does someone access an encrypted OSX folder from Linux? I've mounted the OSX drive on Linux however some folders are not readable.
View 1 Replies View RelatedI no longer can log into my ubuntu mail server as a normal user after installing dtc. I have been trying to resolve the issue but to no avail so I am now going to re-install ubuntu and re-configure the mail server. The problem is that I may have some files in the normal user's profile that I want to backup before I do the re-installation. At least I want to see what folders and files are in there. The other issue is that my hard drive is encrypted. How do I access the files and folders using root?
View 3 Replies View RelatedI'm looking for a way to store an encrypted filesystem on rsync.net which can be mounted and used by multiple clients concurrently - I've considered and experimented with many different ideas, including code...
but all of them are leading me to what looks like a fundamental theoretical problem: a filesystem with concurrent access needs someone to manage it, and who's going to manage it if I can't trust the server? Or refuse on principle to trust the server? There would need to be some trusted entity communicating with every client and making decisions to keep the filesystem and/or block device consistent, right?
Is my understanding correct, or is there any way of achieving what I'm trying to do?
I have an USB internet key (multimode GPRS/EDGE/UMTS/HSDPA) that only works on Windows. Though, I mainly use Linux for development activities and I don't want to move them to Windows. For this reason I decided to use a Windows guest on VirtualBox for internet access and the Linux host for the other stuffs, but I'd greatly prefer to use Linux for everything (internet too) and Windows only as internet gateway.
View 1 Replies View RelatedI have choosen to encrypt Ubuntu 10.10 during installation (no alternate installation). After some time of working properly I get following error message after I put in correct password :
"Could not update ICE authority file /home/surf1/.ICE authority"
When I click "ok" following error message is shown :
"there is a problem with the configurationserver (/usr/lib/libconf2-4/gconf-sanity-check-2 finished with status 256)"
When I click this "ok" next error message appears :
"Nautilus could not create following necessary files : home/surf1/Desktop,/home/surf1/.nautilus"
After I click here ok nothing else happen anymore and I get not access to my account and so to my data.
I've upgraded to my old dell from Xubuntu 9.10 to Xubuntu 10.04 and set up separate /home partition. I chose to encrypt the /home folder when I installed. I'm wondering if that's the quick answer for why I can no longer sftp from my Ubuntu Jaunty laptop. Both machines are on my desk, and I've been happily using ssh to get files between them before this. The Xubuntu machine has openssh server and client installed, the Jaunty machine has only ever had only the ssh client. Now I get a popup saying "Could not open location ..." and the sftp address, and "Host key verification failed." I've not done much with this new install, so I don't mind just re-installing again. I don't need an ecrypted /home, but I do want very much to be able to continue to ssh into that machine. Is it my encrypted /home that's causing this?
View 5 Replies View RelatedI had issues on my last install , I couldn't boot into it cause I accidentally uninstalled python 2.6 and everything it was attached to. So I reinstalled on a separate hard drive, I can see my other file system from the media folder but the only thing in my home dir isthese 2 files 1 read methatsaysPHPCode:THIS DIRECTORY HAS BEEN UNMOUNTED TO PROTECT YOUR DATA.From the graphical desktop, click on: "AccessYour Private Data"orFrom the command line, run: ecryptfs-mount-private and then this file Access-Your-Private-Data.desktopbut when I click it and try to run it I get thisrrorPHPCode:Untrusted application launcherThe application launcher "Access-Your-.desktop" has not been marked as trusted. If you do not know the source of this file, launching it may bensafe.
View 7 Replies View RelatedI need to access /etc/modprobe.d on an encrypted LVM LUKS partition. I m not sure how to go about it though. Mount usually handles my mounting needs, do I need to decrypt the physical volume first? LIst of commands need would make my day.
View 1 Replies View RelatedI tried upgrading to 10.04, and now when it boots it just goes into a grub2 terminal and doesn't display a boot menu. I tried re-installing grub2 from the live cd, but that didn't do anything. I figured if I've hosed the last install I'll install from scratch, but I can't even access my files from the live cd! I did a bit of searching and everyone seems to just encrypt ~/Private, whereas I've encrypted the whole home directory. So much for security... In the live cd, it has a readme.txt and says to type "ecryptfs-mount-private" to access the files, but it just gives the error "ERROR: Encrypted private directory is not setup properly". What do I do?
View 3 Replies View RelatedI'm still running 9.10, but now would like to install 10.10. Now I'm wondering about how to keep access to my encrypted home folder.
Usually, I don't do an 'upgrade', but a fresh re-install. I have a separate /home partition, so normally this works just fine. However, my home directory is encrypted (a feature that was introduced with 9.10, I believe).
So, if I whack the system partition and do a fresh reinstall there, will the new install still be able to read my home directory? Or do I need to save a key file from somewhere?
I've done something a bit stupid. I've already encrypted my home folder and just set it to log in without requesting my password. When i do log in now, no startup sound plays, several error messages appear but no desktop. I think it's because I now don't have an opportunity to enter my home folder password, and it doesn't work at all. Is there any way to edit account settings from 'root' or anything because this really has crippled my computer.
View 2 Replies View RelatedMy company web access is behind proxy(http://abc.proxy). Network admin can get to check who is top10 user and web they access. I owned a centos server. I have a thought that create an encrypted tunnel within proxy so the admin cant detect my http address. This is how it going to works
client with OpenVPN -> OpenVPN server(centos with company proxy)-> proxy -> internet
My connectivity in my client are using OpenVPN server as bridge. Hence, no record for client is recorded in my Network admin monitoring list. OpenVPN server's activity can be traced by network monitoring tools, just assume that our ultimate goal is to hide client activity.
My partitions are set up as follows:
[code]...
I installed Ubuntu successfully using rescue mode on the alternate cd, and let Ubuntu use an internal boot and home. At the final stage grub refused to install to the MBR, and then refused to install to my /boot partition on /dev/sda2. It said: No boot loader has been installed, either because you chose not to or because your specific architecture doesn't support a boot loader yet. You will need to boot manually with the /vmlinuz kernel on partition /dev/mapper/volumegroup-natty and root=/dev/mapper/volumegroup-natty passed as a kernel argument. Returning to debian, I did a update-grub, which detects Windows and Ubuntu:
[code]...
How do I make grub decrypt the LUKS partition before attempting to load the Ubuntu kernel?
I've had everything but /boot on LVM LUKS encryption since I installed 11.4 on my netbook. Suddenly it won't accept my password and boot. Nothing had been updated since the last successful boot. The only possibly different thing that occurred was that I had plugged in my Android phone to charge before it booted up. Anyway, the specific error it gives when I enter the password (and I'm absolutely sure it's the correct password):
Code:
No key available with this passphrase.
Here is everything else on the screen:
Code:
doing fast boot
Creating device nodes with udev
[number (not sure if relevant/unique)] fb:conflicting fb hw usage inteldrmfb vs VESA VGA - removing gen
Volume group "system" not found
[Code]...
With Encrypted Wireless Connection Not Able to Access Internet - no pings, internet browsing, etc. However, without encryption I am able to browse the internet. I need encryption ..
I am pasting diagnostics collected by shell procedure collectNWdata.sh..
Code:
collectNWData.sh V0.6.2.0 (Rev: 1.193, Build: 2010/01/20 21:22:30 UTC)
--- Which type of your network connection should be tested?
--- (2) Wireless connection (WLAN)
--- What's the type of networktopology?
[Code].....
I have installed Kubuntu 10.04 x64 from scratch using the alternate installation CD and unfortunately I'm experiencing some serious troubles. Everything worked fine, installed packages, moved my backed-up data to my encrypted /home partition - until I rebooted. Usually I reboot the system right after the installation process to see if the boot process shows any errors, but what can I say, seems like I forgot to do it this time .
The problem is that the boot process just "hangs" right before the login window should disappear. By "hang" I mean dead: no switching to virtual terminals, no CTRL-ALT-DEL - the system just freezes.
I'm quite familiar with doing things shell-wise, so I started the "Rescue Mode" from the alternate CD and was able to mount my root partition.
Problem #1: No faulty log entries whatsoever: dmesg, boot.log, messages etc. all looking fine - except Xorg.0.log. I suspect the proprietary Nvidia drivers to be the culprit here, because what I'm getting is: "Caught signal 11 (Segmentation Fault). Server aborting"
Running "startx" as root from the rescue shell gives the same results: complete system freeze. "Looks like a reinstallation candidate, let's just backup my data" I thought, which brings us to
Problem #2: I can't mount my encrypted /home from the rescue shell. The exact steps involved are:
Mount my root partition and chroot to it. Issuing "ecryptfs-mount-private" gives the following error message: "ERROR: Encrypted private directory is not setup properly" Becoming my user "su - faulty" and trying step 2 again yields the same results. I feel like I'm almost there: I'm executing commands in my root environment, just can't seem to access my data which I'd like to backup before doing a clean reinstall. Any thoughts?
Apparently after an upgrade, I lost access to my encrypted home directory. Looks like upgrade scripts changed the scripts that mounted my encrypted home directory. As I don't have my ecryptfs password handy, is there any way to revert the things back as they were? I have liked Ubuntu all the way but after this upgrade-mess-up, I might change my view.
View 3 Replies View RelatedI want to access my hard drive to copy over my old documents. So I boot into a LiveUSB, mount my ubuntu partition, and then cd to my home directory, but I can't open it. I get "permission denied." I encrypted my whole home directory and know the password, but how do I "decrypt" it or login as the partition's root so I can access the documents that way. I'm booted into the USB, but can't access the home directory. I get "You do not have the permissions necessary to view the contents of 'jake'".
View 1 Replies View RelatedI had errors pop up when I tried updating my 10.10 to 11.04 so I ended up having to do it from a Live USB which installs it over everything (fine by me).Unfortunately I forgot I had an encrypted /home directory. So various messages and stuff came up when I tried to log in.nfortunately I don't remember what my encryption passphrase is offhand, so I moved it to a slightly different folder name and had to have a new directory created for my username.It's still there, but how can I try to open it trying the various versions of the passphrase I think it may be? Can I double-click it and try?Also, in the future what is the best way to handle a "fresh" install that I want to connect to my encrypted /home directory?
View 4 Replies View RelatedI just tried reinstalling ubuntu 11.04 from the live disc, installation went well but afterwards I cannot get access to my home directory which is encrypted and I stupidly forgot to note the mount passphrase. is there anything I can do? where would the mount passphrase be stored from the previous installation and is there any chance of recoving it. Home and the root are on the same drive and the installation did not format the drive.
View 9 Replies View RelatedI encrypted my home partition with the YaST Partitioner tool, but now I can't access it anymore. After I encrypted it I rebooted the machine and thought that it would prompt me a password field to access the partition, but now I can't access it at all. I tried "mount -t ext4 /dev/sda7 /home" which gives me that error after I entered the password: "mount: wrong fs type, bad option, bad superblock on /dev/sda7, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so"
The info I get from "dmesg | tail" is: "EXT4-fs (sda7): VFS: Can't find ext4 filesystem" Before I encrypted it I converted the /home partition from ext3 to ext4 without any problems and it worked properly. After playing around with it I also discovered that /dev/sda7 got wiped out of /etc/fstab, but I entered it again.
I have installed Suse 11.4 from the Gnome liveCD, and I "can" access my home network when it is unsecured, however, I can't access it when WEP is turned on. Now, I know that WEP is insecure but there are devices on the network that only supports WEP so the router settings can't be changed. Also just for testing purposes i have tried the WPA2 encryption method to no avail (dmesg reports that the connection timed out). The only encryption method that looks promising is the open-wep encryption. When trying to connect to the network (with open-wep turned on) I have performed a bit of checking to see what is going on, now I don't know much about in-depth linux and stuff but, below are the outputs from lsusb, dmesg, iwconfig, and ifconfig.
lsusb
Code:
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 077b:2219 Linksys WUSB11 V2.6 802.11b Adapter
dmesg
[Code]....
I logged in to Recover Mode ("Drop to root shell prompt") this morning to do something. Naturally, I wanted access to my encrypted home folder.
The README file says to run ecryptfs-mount-private. However, that command returns an error:
"ERROR: Encrypted private directory is not setup properly."
This cannot be correct, because if I log in normally, I get my home folder without any problem.
How can I access my encrypted home folder when I boot via Recover Mode?
I just installed Win 7 In VB and was wondering how can I access my printer in it?
I installed the drivers, but when I turn the printer on it doesn't register in Win 7 (VB)
I installed VirtualBox 3.2.10 running Windows XP Pro and I don't have Access to my USB Ports in XP.VirtualBox shows the ports but they are grayed out and XP device manager lists Intell 82801FB/FBM USB2 Enhanced Host Controller - 265CStandard OpenHCD USB ControllerUSB Root ControllerUSB Root Controllerunder device manager but when I click the USB Root Ports it shows nothing attached and says that there are 8 ports available in each HUB.If I plug in a device Windows does not detect a new device or report any kind of errors about USB devices and there are no yellow exclamation points under Device Manager.
View 3 Replies View RelatedIs it at all possible to disable internet access for the Debian host while providing internet access to the VirtualBox guest(s)?
I plan to only hook up the host to the internet for updates, upgrades and installations, although if I can, then I will make a Debian guest to test everything out and download the files from there and install everything on the host without even a single host connection point.
Is this the indomitable approach to intercommunication security? If not, then what haven't I thought of yet?
I upgraded to VirtualBox 3.2.0, and I finally installed Windows XP Professional onto it. Anyways, have any of you noticed that when you set the VM to fullscreen, you cannot access the taskbar at all? The icon for the cursor reverts to my Linux cursor, showing that the focus switched to Linux somehow in someway. The taskbar is set to always show, and this happens at the EXACT pixel that the panel starts at. It's pretty annoying if I say so myself. Forgot to mention, that this only happens with the mouse integration, and not mouse capture (for obvious reasons). Using: Windows XP Professional 32-bit (guest, and running SP3 with all updates) on VirtualBox 3.2.0 hosted by Ubuntu 10.04 64-bit (using KDE).
View 6 Replies View RelatedI have an issue my host os is ubuntu 10.10 and i've installed bt4 in virtualbox and i am not able to access internet from my guest os. NAT and Bridged dint work
View 3 Replies View RelatedI used to be able to access the web server I had running on my guest OS in Virtual Box from my host OS. I also had it set to the network settings of "Host Only Adapter". Then I needed to access the internet directly on the gues OS, so I changed my settings on the guest OS to "NAT" (in virtual box), and in /etc/network/interfaces, I removed the loopback stuff and the static IP I'd put in. Now no matter what I do, I cannot get it back to being accessible from the host os! I even did a completely NEW install of Ubuntu guest OS in Virtual box Guest OS: Ubuntu 10.04 Desktop Host OS: OpenSUSE 11.3 VirtualBox: 3.2.6
View 5 Replies View Related