General :: Access An Encrypted OSX Folder?
Nov 1, 2010How does someone access an encrypted OSX folder from Linux? I've mounted the OSX drive on Linux however some folders are not readable.
View 1 RepliesHow does someone access an encrypted OSX folder from Linux? I've mounted the OSX drive on Linux however some folders are not readable.
View 1 RepliesI had issues on my last install , I couldn't boot into it cause I accidentally uninstalled python 2.6 and everything it was attached to. So I reinstalled on a separate hard drive, I can see my other file system from the media folder but the only thing in my home dir isthese 2 files 1 read methatsaysPHPCode:THIS DIRECTORY HAS BEEN UNMOUNTED TO PROTECT YOUR DATA.From the graphical desktop, click on: "AccessYour Private Data"orFrom the command line, run: ecryptfs-mount-private and then this file Access-Your-Private-Data.desktopbut when I click it and try to run it I get thisrrorPHPCode:Untrusted application launcherThe application launcher "Access-Your-.desktop" has not been marked as trusted. If you do not know the source of this file, launching it may bensafe.
View 7 Replies View RelatedI'm still running 9.10, but now would like to install 10.10. Now I'm wondering about how to keep access to my encrypted home folder.
Usually, I don't do an 'upgrade', but a fresh re-install. I have a separate /home partition, so normally this works just fine. However, my home directory is encrypted (a feature that was introduced with 9.10, I believe).
So, if I whack the system partition and do a fresh reinstall there, will the new install still be able to read my home directory? Or do I need to save a key file from somewhere?
I've done something a bit stupid. I've already encrypted my home folder and just set it to log in without requesting my password. When i do log in now, no startup sound plays, several error messages appear but no desktop. I think it's because I now don't have an opportunity to enter my home folder password, and it doesn't work at all. Is there any way to edit account settings from 'root' or anything because this really has crippled my computer.
View 2 Replies View RelatedI logged in to Recover Mode ("Drop to root shell prompt") this morning to do something. Naturally, I wanted access to my encrypted home folder.
The README file says to run ecryptfs-mount-private. However, that command returns an error:
"ERROR: Encrypted private directory is not setup properly."
This cannot be correct, because if I log in normally, I get my home folder without any problem.
How can I access my encrypted home folder when I boot via Recover Mode?
I used the standard disk utility on another 2.6.x Ubuntu desktop to encrypt a USB device. Can I access this through a similar VM on a Mac OS X host?
I don't have any problems accessing normal USB devices on the VM, but when I insert the encrypted one, I get an error message saying that it can't be mounted.
I no longer can log into my ubuntu mail server as a normal user after installing dtc. I have been trying to resolve the issue but to no avail so I am now going to re-install ubuntu and re-configure the mail server. The problem is that I may have some files in the normal user's profile that I want to backup before I do the re-installation. At least I want to see what folders and files are in there. The other issue is that my hard drive is encrypted. How do I access the files and folders using root?
View 3 Replies View RelatedI'm looking for a way to store an encrypted filesystem on rsync.net which can be mounted and used by multiple clients concurrently - I've considered and experimented with many different ideas, including code...
but all of them are leading me to what looks like a fundamental theoretical problem: a filesystem with concurrent access needs someone to manage it, and who's going to manage it if I can't trust the server? Or refuse on principle to trust the server? There would need to be some trusted entity communicating with every client and making decisions to keep the filesystem and/or block device consistent, right?
Is my understanding correct, or is there any way of achieving what I'm trying to do?
I can't remember if i choose encrypt my home folder when i first install ubuntu.
is there a way to know if it's encrypted?
I recently did a clean install of Ubuntu 9.10 and when I did I chose to have /home on it's own partition and have it encrypted. The more I think about it the more I regret this decision. What if I want to switch distros down the road? What if I have to boot from a live cd to back up files? Is there a way to "undo" the encrypted home folder permanently? I don't mind having it on it's own partition, it's just the encryption that makes me worry.
View 1 Replies View RelatedI recently installed Ubuntu Karmic on my netbook (I tried netbook remix but preferred the look of the regular desktop edition). When during installation, the option to encrypt the home folder appeared, and being mildly paranoid I thought, "sure, why not?" (I must warn you that I am a new user with little technical knowledge other than what I have managed to gather in a semi-passive manner over the past couple of months). The problem is, I (try to) backup my data weekly, and so today I gave it a shot (I got the desktop edition a week ago). I have encountered the following problem.
I backup my system following (approximately) the instructions at [URL] for Backup The exact command I enter at backup is:
sudo tar -cvpjf 2010.02.13.tar.bz2 --exclude=/proc --exclude=/lost+found --exclude=/sys --exclude=/mnt --exclude=/media --exclude=/home/dan/music /
(I exclude my music folder as it is huge and I already have it all in several other locations) When I executed this command all ran smoothly for a while, however it soon began backing up the directory /home/.ecryptfs/dan/.Private At this point, it started backing up the huge number of files in this directory. I assume these are encryption keys? Forgive my ignorance... Anyway, it took several hours going through this folder, and finally bzip gave up, complaining of excessive file size:
bzip2: I/O or other error, bailing out. Possible reason follows.
bzip2: File too large
Input file = (stdin), output file = (stdout)
I assume that excluding the encryption keys and such from the backup would be a bad idea: I guess that if I did not restore the relevant directories along with my home folder, it would be inaccessible? Is there a way to avoid backing up such a large amount of data?
Trying to mount a encrypted folder using cyptkeeper. i'm getting the following error box.
Quote:
The encrypted folder could not be mounted because the mount point is not empty:
I've tried to mount this folder through another partition and OS without any luck, i got the same message.
How to decrypt encrypted home folder?Which is already encrypted ?
View 9 Replies View RelatedI'm guessing that a file is created as a loopback device and encrypted (using LUKS?)
What is the mechanism used at user login to decrypt and mount the encrypted $HOME and to re-encrypt it at logout?
I confess an ulterior motive here - SWMBO has recently got her hands on an Acer Aspire one running Linpus Lite and there's absolutely no security on it
Personally I'd dump Linpus and put on openSUSE but it's her box and she likes the simple interface that Acer have supplied so maybe I can set up the encrypted $HOME as YaST does for openSUSE if I can find out what to do.
I just installed 9.10 on my laptop and selected the option for home folder encryption. I am running DropBox and placed the DropBox folder on my desktop (meaning it should be encrypted when I am logged out.) So I have two questions:
1) Shouldn't this setup cause my DropBox files on the server to be encrypted? Apparently they are not because they appear as unencrypted text using the DropBox Web interface.
2) If they were encrypted on the server (which doesn't appear to be the case right now), how would it be possible to share them with another client unless the encryption on both clients were set up identically?
Let's begin from the top. I have a relatively new laptop that I've been running Ubuntu on (along with a little-used Windows boot). Picked it up in November or so, installed the current "latest" version of Ubuntu at the time (9.10). I have been doing incremental upgrades, and it's been progressively breaking down more and more. Yes, this includes 10.04.
After GRUB stopped working, I decided it was time to try a reinstall from the top. I told it to leave all the other operating systems alone and do a full reinstall.
Fortunately, I had managed to stuff most of my current work in duplicate locations during this whole debacle, somehow. Don't ask me how I managed to do that when GRUB wasn't working. However, when I installed, I conscientiously said "Oh, yes, Ubuntu, encrypt my home folder! I love privacy!" As a result, about... 30 gigabytes of useful (but ultimately re-downloadable) material is rather inaccessible at the moment. When I try to boot the old system using the newly fixed GRUB, it goes into kernel panic. This seems like a no-go.
I have a saved hojillion-character long passphrase for decryption from my install back in November. Conscientiously saved in the case of just such an emergency.
I read this how-to and followed it to the letter as far as I could tell, trying to mount with ecrytfs to recover my data.
[USERNAME] here is a proxy for my actual username. Yes, the location of my old home folder may seem a little bizarre.
Code:
sudo mount -t ecryptfs /media/c82ca9fe-2b15-4aca-a98d-6482b1d80a32/home/[USERNAME]/ /home/[USERNAME]/oldhome
Passphrase:
Select cipher:
1) aes: blocksize = 16; min keysize = 16; max keysize = 32 (not loaded)
[Code].....
Just did a new netbook install of Lucid. Went through the setup, putting in my usual username etc. But I thought as it's a portable, I'd better select the encrypted home folder option. All went OK.
I have a home network with a NAS and I needed to change the UID to 1004 to match the rest of the network.
That's when it all when wrong. If I do that, I end up with no permissions on the user folder. A bit of a paradox, you can't change UID if logged in, but unless you're logged in, can't access the files.
My attempts to get around it by changing UID's back chowning, changing back etc. have screwed things up completely.
I have managed to open the encrypted folder and chown, but after a reboot it's all back to the original UIDs, but now I can't get in at all.
My laptop running on ubuntu has been having some issues and it's giving error reports on logging in. Because I want to retrieve my files above all else, I installed ubuntu to a usb-stick and booted it directly from there. I can asses /media/myharddrive/home and there's a folder called lennard, which is the user account on my laptop. I can't open it however, because I don't have the necessary permissions. I'm afraid I encrypted it with an option that was standard to ubuntu. I have a 23-digit code right in front of me but I'm not asked to enter it so I don't know what to do with it right now.
View 1 Replies View RelatedDuring the installation of 10.04 I opted to have my home folder encrypted. I no longer want my home folder to be encrypted. How may I achieve this ?
View 5 Replies View RelatedI installed 10.10nbr on my wife's eee 901. Now she cannot remember her password. I've tried booting to recovery to use the passwd command, but that does not work. I believe I encrypted the home folder when I installed. Normally if I don't encrypt home, then I enable auto-login.
View 4 Replies View RelatedI upgraded from ubuntu 9.10 to 11.04. During installation (Natty) I chosen the option to encrypt the home folder. After a day the system crashed. It was showing that disk is having health problems. If I boot from live cd then i cant access the home folder. When I tried to mount the home folder, it says "Reading directory: input/output error"
Because I used Karmic without problem I reinstalled the Karmic, then I can mount the home folder, but cant access it as it was encrypted.Now Karmic is installed. I tried to boot from Live CD of Natty and tried to mount /home folder, it says some super-block issues.How to access the files in the home folder?
It turns out that different languages can have a path to the desktop folder.
~/Desktop is ~/Työpöytä in Finnish
What way via the shell can I get access to the translated folder?
I am new to linux. How to hide a folder,and how to access a folder which was already hidden (the folder should not show any properties if we hide it).
View 3 Replies View RelatedI have change my folder permission to #chmod 700 foldername
How could I allow one person to access the folder and the rest do not have access? if the person username is username1.
(i do not have admin right)
Something went wrong with my computer. I want to copy my data folders to a usb drive and reinstall. So I'm using a livecd. However I can't access the folder. Under home/username the username folder shows a no-entry sign. When I use gksu nautilus I get loose the no-entry sign but just find a text file. How do I get access to the files that are there, I think they are encrypted.
View 1 Replies View RelatedI'm using ubuntu server 9.10 for a home build NAS. Everything is working great just have one more thing to figure out. I have Samba set up to access my files and I set up a recycle feature so anything deleted will get moved to a Recycled folder. (I learned this the hard way after hitting delete key by accident while browsing the shares in windows. Lost 100 GB of data)
Now it is for the most part working but the permissions on folders isn't getting set right. If I delete a file in a share I can go to Recycle bin folder and delete the file for good. But if I delete a folder I can not access that folder to delete or restore from the Recycle bin folder. I have to chmod the folder before I can do anything with it. Anything I can change to get folders deleted via windows to have the right permissions when it is moved to the Recycle bin folder?
[Code]///
What are the steps I must take to move my existing home folder to a separate, encrypted partition? Can I create this partition without damaging my current partition? Where is a trusted location to download App Armor profiles? What else can I do to harden the security of Ubuntu?
View 1 Replies View RelatedI want to create a user with a encrypted home folder. I tried "sudo adduser --encrypt-home username" but I get following error "adduser: Could not find program named `ecryptfs-setup-private' in $PATH". I installed the cryptsetup package but without result.
View 1 Replies View RelatedI would like to give a few students a preconfigured Ubuntu USB stick with certain apps. I also encrypted the home folder in case of loss.
With TrueCrypt, cloning an encrypted container would be a big no-no because any one could just backup their header with a known pw and use it to decrypt anyone else's container due to each container using the same master key. I assumes the same applies to home folder encryption, yes?
Is there a way, other than creating a new user with home folder encryption, of forcing a master key change?
while since I've been here. I'm having an issue with a fresh install of 11.04. Due to work requirements, I encrypted my home folder, which is fine, however, it seems to randomly lock itself down while I'm working, and it's getting really annoying.
Apps stop working, I can't open nautilus (something about not being able to create certain folders because home is locked), hell, even the terminal link on my desktop says failed to launch application (though the launcher on the top panel works). I just have to run ecryptfs-mount-private and enter my password to fix it, but it's doing this every 15 minutes or so. what might cause it to relock itself so frequently? I would expect to not have to deal with mounting my private data, that should happen at login and be good until log out.