General :: VNC Connection To A Dual Display PC?
Jul 11, 2010
I have a one ubuntu machine, that has two displays are fixed, and I used to have a vnc connection from a debian pc. but the thing is each time I connected to this ubuntu pc, i usually get my connection to the primary display. Is there a method, that I can display both displays, at once, and I have a scroll bar to scroll between each of them. I tried to specify a port as,
xvnc4viewer 192.168.1.1:5900 -> goes to the primary display
xvnc4viewer 192.168.1.1:5901 -> goes to the secondary display
but Isn't there a method that I can view both of them at once?
View 2 Replies
ADVERTISEMENT
Sep 20, 2010
I would like to use the VGA-Port for Beamer in "Mirror" Mode how to modify the xorg.conf? I am not familiar with linux configuration.
View 2 Replies
View Related
Jan 8, 2010
Hi I am new to ubuntu and am having major problems setting my displays up. my setup is a hd TV to the Left of my pc monitor, i have managed to configure catalyst to let me have a main display with the second display being an extension of the first, the problem is i cannot seem to swap my primary display, at the minute my HDTV has all the taskbars and everything on it while my pc monitor is just a blank background, i would like it so i could start a film playing for my children, then drag it across to the HDTV while i can still use my pc in the background.
View 1 Replies
View Related
Sep 12, 2011
Does a KVM software solution exist that will allow you to utilize two monitors on multiple systems? I'd like to hook up my MBP to my displays, but have the flexibility to switch back to Windows/Linux on a whim.
I have two monitors. I would like the ability to use these monitors from all of my computers using a software-based KVM switch. The alternative is stopping my workflow and manually hooking up the monitors, which is the process I currently use and the process that I'm trying to automate. I'm wondering if such a product exists.
View 1 Replies
View Related
Jul 12, 2010
I am Currently attempting to set up a Dual Screen setup at my work but seem to be having some strange results. For some reason the O/S is only recognising one of the monitors, it knows exactly what the Make and model of the monitor is but doesnt appear to know that there is another monitor plugged in. It constantly says that there is 2 screens plugged in but lists the second screen as "CRT-0" even if no DVI cable is plugged into the second screen. This has really troubled me and has really got me thinking. I have set-up other Dual-screen setups with exactly the same hardware previously and it has worked fine? I am using a Lenovo A58 Tower with an Nvidia Quadro FX-380 Graphics card that I know is capable of dual Dual-link DVI output! With 2 x LG W3000-H Monitors running Fedora 12.
View 1 Replies
View Related
Feb 3, 2011
I have two Ubuntu 10.4 machines (and Ubuntu continues to hide more and more xorg.conf config such that I no longer know where to find it). One is a laptop running dual headed - DP1 is the internal screen, and VGA1 is an external monitor; both are running at 1600x900. The other machine is a desktop running both VGA1 and HDMI1 (which is actually a display port with a DVI adapter) at 1600x900. So in both instances my desktop is 3200x900. I run a VNC server on the laptop and connect to it (via SSH tunnel) from the desktop - when I press the full screen hot key, I get a 1600x900 view of the remote machine on one monitor, and half of my local desktop on the other monitor - the "full screen" only expands to fill one local monitor.
Normally this is exactly what you want when you full screen a web browser, email client, or other application. I'm sure there's some X magic to make it clear what a full screen actually entails, and the vnc client application is just dutifully accepting what it's told. While I would like to keep the normal full screen behavior for regular applications, but when I'm VNCing to another 3200x900 machine, I'd really like full screen to stretch across both local displays. Resizing the window to be "close" isn't quite good enough since I still have local panels at the top and bottom of one display (though I can set them to autohide), plus the VNC client application window border (since it doesn't appear to respect -notitle).
Is there any good way to have X lie to a single application about the "full screen" size? Can I get it to lie to all applications? xrandr --noprimary appears to have no effect.
View 2 Replies
View Related
Jan 14, 2011
Recently installed OpenSuse 11.3 on my system, Setup dual monitors w/ the latest Nvidia driver from Yast repo : download.nvidia.com
Initially twin view ( same desktop viewed on both monitors ) worked no problem
Once xinorama was enabled to extend the one desktop across both I encountered a mouse issue.
Main monitor is on the right, 2ndary on the left... When I drag the mouse from the right monitor over to the lest.. the cursor appears to get stuck on the left monitor's right hand edge.. it flickers as i move it around...
If I drag the mouse to the right a few whole mousepad lengths it will come back to the right...its like fighting to bring it back..
View 1 Replies
View Related
Oct 8, 2010
i'm new in linux and i have a problem with my hdmi lcd under linux. To be more precise , my graphic card is an Nvidia GTX 295 with hdmi output to a Dell 2408W LCD screen and the problem is that linux can't see the hdmi connection, working just with DVI or VGA. I also have Windows 7 in dual boot with linux and in windows it works just fine. To mention that i tried several linux distributions: Ubuntu, Ubuntu ultimate 2.7 and Sabayon 5.4.
View 1 Replies
View Related
Nov 3, 2010
I just upgraded to Fedora 14 and found that my KDE "default" display (i.e. the display where the default panel is situated) has changed from LVDS1 to VGA1, which is not reversed from Fedora 13. In fact, everything that used to be associated with LVDS1 is not associated with VGA1 and vice versa.
View 3 Replies
View Related
Jul 4, 2014
I have wheezy installed on my laptop with XFCE 4.8 and kernel 3.14 from backports. The laptop uses Nivida-optimus:
Code: Select all00:02.0 VGA compatible controller: Intel Corporation Haswell Integrated Graphics Controller (rev 06)
01:00.0 3D controller: NVIDIA Corporation Device 1292 (rev a1)
I installed the proprietary bumblebee-nvidia (version 3.2.1) as per the instructions in URL...The problem is that when I connect a monitor to the laptop, the image is duplicated with only part of the screen showing on the second monitor. The monitor itself is not detected in the display settings or arandr / xrandr, so I can't change the resolution or set dual display, etc. Here is the output of xrandr:
Code: Select all$ xrandr
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 1920 x 1080, current 1920 x 1080, maximum 1920 x 1080
default connected 1920x1080+0+0 0mm x 0mm
1920x1080 0.0*
View 0 Replies
View Related
Jun 19, 2010
I just installed lucid on my laptop with a second screen. Unfortunately, I cannot display any video. Neither on the laptop screen nor on the second external screen. In contrast, rebooting without attaching the external screen allows me to display videos again.
I never experienced this kind of behavior with Ubuntu 9.10.
Graphic card: Intel 945
Let me know if you need further information.
View 2 Replies
View Related
Aug 30, 2010
New machine with an ATI 5770, with a fresh install of Ubuntu 10.04 (lucid, 64-bit). What a mess! As reported elsewhere, the initial install sometimes came up with a black screen, or corrupted displays, different each time. After several retries, I had a display that was corrupted but barely readable. The installed Ubuntu booted, but also had a corrupted display, just barely readable. I was just able to make out the hint that I should use the proprietary drivers, so I booted into safe mode and enabled them. Afterward, the display came up correctly.
This is ok for me, as a long-time Ubuntu user. But it really is like a trip back to the bad-old-days of Linux: you really cannot expect anyone but a geek to get through this. And the is the LTS version of Ubuntu? I use two monitors, to provide a double-wide single desktop. When I log in, the second monitor displays random noise, and is entirely unusable. I have to use System-Preferences-Monitors to switch the second display off, then switch it back on, and then everything works fine.
View 5 Replies
View Related
May 9, 2010
Is this possible? I have 2 screens and I'd like to see if I can use the same panel on both sides.
View 1 Replies
View Related
Jul 20, 2010
I am having a few strange issues with my new SUSE 11.3 install. This is my first time attempting to use it as my full time OS, so I can't say if these problems existed in previous versions.
1.) When I configure extended desktop, it works fine, but the settings do not save. Anytime I reboot my system, I have to reconfigure the Dual Display settings
2.) If I enable openGL effects, or use an OpenGL screen saver my system locks up and I can not restart X. (I have to power cycle the computer)
3.) I get corrupt icons sometimes in my system tray and desktop. (They look like a TV that is tuned into a non broadcasting number)
I have a Quadro 1700, and I read about installing the NVIDIA drivers instead of the ones that come with SUSE.
View 3 Replies
View Related
Mar 10, 2010
I just installed Ubuntu 9.10 this evening. I have a Nvidia Geforce 8500GT video card with two monitors hooked up (one to the cards VGA, the other to the DVI). I installed Nvidia drivers and Ubuntu is working with both monitors fine.
The problem I am having is it chose the monitor plugged into VGA as the primary (uses that monitor for the toolbars) when I really want them to go on the monitor that is plugged into DVI. Is there anyway for me to switch which monitor Ubuntu treats as the primary?
View 2 Replies
View Related
Jul 15, 2010
This little program is great for Windows users with multiple displays:[URl]...Anybody know of a similar program or some way to tweak some settings to get the same effect in Linux?
View 2 Replies
View Related
Jun 1, 2009
I upgraded to FC10 from FC8 and my Gnome-panel no longer spans both screens in my dual monitor configuration. This worked fine in FC8, and I can't seem to figure out how to make this config work in FC10.
I've tried Xinerama and Twinview, and various configurations in xorg.conf, and cannot seem to make it happen.
How to make both my panels (top and bottom) go across both screens?
View 2 Replies
View Related
Jul 8, 2009
When I try to run the 'system-config-display' program for Fedora 11 and I use the dual head tab, attempting to save the settings results in this:
Traceback (most recent call last):
File "/usr/share/system-config-display/xConfigDialog.py", line 212, in ok
if card.getDescription() == self.secondVideocardOptionMenu.get_menu().get_acti ve().get_data("NAME"):
AttributeError: 'NoneType' object has no attribute 'get_data'
And it won't save the data.
View 4 Replies
View Related
Jan 13, 2010
I want to be able to change the settings for my top down dual head display. Basically one monitor sits on top of another right now. How it was setup before was that they used to sit right next to each other so when you mouse over to the right it would go to the new screen. The problem is now when one sits on top of the other I want to be able to just mouse up instead of mousing over to the right. I don't want to use the gui to be able to do this. I want to find out what config file and specifically what setting in the config file would allow me to change this.
View 2 Replies
View Related
Jul 3, 2010
I was wondering how to enable an S-Video display connection to my TV. I'm on a Compaq Presario C700 using F13. I connected it to my laptop and TV, and it displayed the laptop screen through startup, but went away when the login screen appeared, and didn't display after I logged in.
View 5 Replies
View Related
Sep 20, 2010
I just put in an ATI Radeon x600 on my OpenSuse system I loaded last week. The Xorg log shows that it is using the Radeon module (driver). I am seeing colored/static rectangles covering the green wallpaper and when scrolling in Firefox. Does anyone know how to resolve this issue, and is this the driver I should be using?
View 3 Replies
View Related
Aug 17, 2011
having trouble setting up a dual monitor from my Dell xps laptop using an HDMI port. It dual boots onto Ubuntu 10.04. The computer has a Nvidia GeForce GT 555M with Optimus graphics card I need to make sure I have not installed the restricted drivers. So I think what is happening right now is that the graphics are shown off the integrated graphics card. This is my output from <lspci | grep VGA>
Code:
00:02.0 VGA compatible controller: Intel Corporation Device 0126 (rev 09)
01:00.0 VGA compatible controller: nVidia Corporation Device 0dcd (rev a1)
The forum recommends to use this program called Bumblebee but I have had some issues with that in the past. Is there somehow I can setup my dual display while staying on Ubuntu 10.04 and not installing Bumblebee? I have researched into setting up dual display walkthroughs before but they all concentrate on nvidia or ATI configurations.
View 6 Replies
View Related
Dec 26, 2010
When i ssh to server using -X, i always confuse about which display number i should export. It seems to me sometimes the display number has been used by something, so what i can do is only
export DISPLAY=localhost:0 && xclock
export DISPLAY=localhost:1 && xclock
export DISPLAY=localhost:2 && xclock
[code]....
View 1 Replies
View Related
Jun 28, 2011
I have the following scenario that doesn't seem to work normally. I have a windows 7 pc from which I am using putty to connect to my other linux servers (all running redhat 5 and 6). So here is the scenario that works and one that does not work. And I'm trying to figure out the one that does not work. Scenario that works:
From windows 7 (putty) I ssh into Linux_Server_1.
echo $DISPLAY
localhost:10.0
I run xclock and I see it pop up on my windows 7 pc. I am using xming on windows 7 to help me populate the display from linux to windows. One that does not work:
From windows 7 (putty) I ssh into Linux_Server_1. Then from Linux_Server_1 I ssh into Linux_Server_2.
echo $DISPLAY
<no output>
I try to setup $DISPLAY with localhost:10.0 or 0.0 or even my windows 7 pc ip address:0.0 ....etc Then when I try to run xclock I doesn't work.
I get these error messages: Error: Can't open display: <ip of display>
Also as a side note all our Linux servers are sitting on one subnet. My pc is sitting on another subnet. I use vpn to connect to the subnet where the servers sit from my pc.
View 4 Replies
View Related
Jul 30, 2010
I am trying to run xeyes on a remote machine via ssh connection. Both my local and remote machines are Ubuntu 10.04. I connect to remote server via ssh -X and It does not forward to display to my local machine...
Code:
root@goliath:/opt/install/bits# ssh -X -l root duke
root@duke's password:
Linux duke 2.6.32-21-generic #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010 i686 GNU/Linux
Ubuntu 10.04 LTS
[Code]....
View 6 Replies
View Related
Jun 7, 2010
I have a question regarding the configuration of Network Connection. My wired connection is fine right now and when I check the network connection applet, it display active information of eth0. However, when I click the Configure button, the Network Connection window appears but there's nothing in the Wired panel. Should there be a eth0 in that panel? I remember I had one before, but after I messed with some configuration of VPN, my network became unstable and I remove the Network Manager to try to solve the problem. Since then, there's nothing in my Network Connection window, though I can still connect to my router with eth0. Now even after I reinstalled the Network Manager, I still don't get anything.
View 7 Replies
View Related
Dec 14, 2010
I am new to Linux and Debian. I have Compaq Presario R3000 laptop, which is 5 years old now. I have RealTek RTL8139 family PCI Fast Ethernet NIC. Currently I have a broadband connection at home. I have dual boot Windows XP Professional and Debian (which I installed a week ago through CD). I have done some preliminary tests for the network and I am posting the screenshots for the tests (e.g. lspci, ifconfig, etc.). I also did two more commands. For 'cat /etc/network/ifstate' the output was 'No such file or directory'. Same output was for the command 'cat /etc/network/options'.
View 7 Replies
View Related
Nov 12, 2009
Each time I start up debian -lenny, the network-manager does not automatically connect me to my wireless network. The connection list shows a lot of networks available, but mine is always absent from the list. This means I each time have to go to "Connect to other Wireless Network" in and write in my network name (SSID) and password (PWA2 Personal). Then is connects nicely and everything works fine until next time I boot
View 5 Replies
View Related
Jun 25, 2010
I would like to have all traffic from the ethernet connection out through the wireless (basically using the box as a router) however I am having some trouble doing this.
I have done this before on Windows however I am having some trouble doing this on linux, I have tried using Squid Proxy however I am having some trouble using configuring/using it.
I am using Yellow Dog Linux however I am willing to change to any other distro as long as it is compatable with PS3 (as this is what im using linux on)
View 14 Replies
View Related
Apr 8, 2010
I have 2 connections, wlan and wired, and I'd want to have a few websites (in my browser) to connect through the wireless connection while other go through the wired rj45 connection. s it possible? (without unplugging the rj45 cable...)
View 2 Replies
View Related
