General :: Setting Up The Alternative Ad-hoc Connection In Case Primary Wireless Fails?
Jul 2, 2011
I have a device that is only accessible using wireless. By default it starts an ad-hoc wireless I can connect to. The problem is there is no internet access on the ad-hoc. So I'm connecting it to my router using the commands (its a gnu/linux):
iwconfig ath0 mode managed essid "ESSID"
ifconfig ath0 192.168.1.25 netmask 255.255.255.0 up
route add default gw 192.168.1.1
I want to add it to start up script but I don't want to get locked out of the device forever if something happens to the router (its really old). Is there any way to check if the connection failed and create an ad-hoc instead if it failed?
View 1 Replies
ADVERTISEMENT
Jul 27, 2010
Linux kernel 2.6, Slackware 12.0
How do I set case insensibility in searches running vim? I thought I could find this in the manual or the in browsing help within the program itself, but it was not long before I realized I was mistaken.
View 5 Replies
View Related
Jun 8, 2011
I'm having problems setting the primary display in my Linux environment. I tried following the instructions here which seems to be working for everyone but it didn't work for me. In my /etc/gnome-settings-daemon/xrandr folder, I edited the monitors.xml file as well. It looks like this:
<monitors version="1">
<configuration>
<clone>no</clone>
<output name="LVDS">
<vendor>AUO</vendor>
<product>0x22ec</product>
<serial>0x00000000</serial>
<width>1366</width>
<height>768</height>
<rate>60</rate>
<x>1920</x>
<y>0</y>
<rotation>normal</rotation>
<reflect_x>no</reflect_x>
<reflect_y>no</reflect_y>
<primary>no</primary>
</output>
<output name="VGA-0">
<vendor>DEL</vendor>
<product>0xf022</product>
<serial>0x30395453</serial>
<width>1920</width>
<height>1080</height>
<rate>60</rate>
<x>0</x>
<y>0</y>
<rotation>normal</rotation>
<reflect_x>no</reflect_x>
<reflect_y>no</reflect_y>
<primary>no</primary>
</output>
<output name="HDMI-0">
</output>
</configuration>
</monitors>
The settings seem correct, primary is set to yes on the monitor that I want but it doesn't seem to be working as well.
View 2 Replies
View Related
Apr 15, 2010
Normally I use disper to enable my external monitor, but I don't think I can force the 2nd monitor to be primary. [URL]
I've played around with nv-control-dpy included in the nvidia-control source, but I haven't figured out how to do it yet. How to get: [URL]
This is a laptop, to which I connect an external hdmi display when I get to work. dipser -e extends the desktop for me, but the laptop remains the primary desktop (holding the panels etc). nvidia-settings can set primary monitor for me, but I want to use the cli.
View 4 Replies
View Related
Aug 11, 2010
I am using Ubuntu 10.04 64bit but so far all attempts to connecting over wireless give the same end result "VPN Connection Failed" from the [URL] at the end of the page as a link to a blog [URL] first problem is I can't restart network manager
Code:
sudo /etc/init.d/NetworkManager restart
return command not found, but if I use this
Code:
sudo service network-manager restart
works, maybe the problem of this connection is because I attempt over wireless.
View 1 Replies
View Related
May 15, 2010
I am having some trouble setting up my wireless connection. I have a desktop version of ubuntu, and am trying to connect wirelessly to my modem, but it dosent even seem to be recognizing my wireless usb card. How do I get it to do that? Also, when I go to set up new wireless connection, it asks me for my ssid, mac address, mode, bssid, MTC, Wep index, authentication, ipv4 setting, and ipv6 settings. What the heck am I supposed to put in for those things?
View 5 Replies
View Related
Feb 16, 2011
Set Up and Connect to my Wireless Internet. I have tried to get it to work but I have not been successful so far. Here is what I have done:
Created dutthome3 (My Internet Name) in the Wireless Connections:
Editing Wireless Connection, Wireless Security, IPv4 and IPv6 Screen Shots/Settings:
So where are my mistakes? What do I need to change to Set Up my Wireless Connection?
View 3 Replies
View Related
Dec 20, 2010
im having a problem setting ad hoc wireless network between two opensuse boxes, using network manager, every time im about to smash the box, maybe im doing something wrong in the steps or something idk
how to set up ad hoc connectionl
note: im a linux rookie
View 3 Replies
View Related
Jun 11, 2010
I'm having a bit of trouble setting up a wireless connection. I'm really trying to set it up for Lucid Lynx on another partition, but right now I'm on OS X running Jaunty Jackalope in Sun's VirtualBox. Neither auto-recognize the network I'm trying to connect too (don't know if Ubuntu has that feature), but OS X has a good connection. I'm trying to set up Jaunty first since I at least have some internet connection, but I'm not planning on using it that much.
So far, what I have put into the Network setup application is the network's name (SSID, right?), that it's WPA, and the network password. Though now I've checked back on the password field, the 8 digit password (eight circles) has been replaced with a bunch of circles, so I don't know what's up with that.
What's empty is the BSSID field, the MAC address, and for all intents and purposes, the password field since it's not the same as what I put in there. I assume OS X has a copy of this information somewhere since it's already connected? I've tried quite a few attempts to get either Ubuntu system to connect, and my google-fu is not helping.
View 2 Replies
View Related
Jul 9, 2011
GNU assembler 2.17 (invoked as 'as').
Is there a way of setting no case sensitivity in as?
View 3 Replies
View Related
Oct 7, 2010
I just installed Ubuntu 10.04 . Need to get my wireless router working on my HP laptop. Have been using a Linksys WRT54G Router with windows and it is working properly. Tried setting up in NetworkManager but it does not work.
When looking at things in the Ubuntu terminal it says the network is DISABLED.
View 2 Replies
View Related
Jul 8, 2010
Recently I updated my openSUSE 11.2 and I'm not too sure what all were the recent updates but I suspect networkmanager also got updated. After I restarted my machine, my laptop fails to connect to the wireless access point. I tried both in gnome as well as KDE but the same error. This is the log I found in my /var/log/NetworkManager which I believe should give some pointers.
Code:
Jul 8 15:08:42 AshSuse1520 NetworkManager: <info> Activation (wlan0) starting connection 'Buckeye Plaza'
Jul 8 15:08:42 AshSuse1520 NetworkManager: <info> (wlan0): device state change: 3 -> 4 (reason 0)
Jul 8 15:08:42 AshSuse1520 NetworkManager: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
[Code]....
I did a search of this error in google and all I got were few results which complained about bugs in some debian distro.
My wireless card works fine and so does the access point I try to connect to since my Ubuntu installation is able to connect fine as well as my windows Xp.
View 5 Replies
View Related
Sep 26, 2010
Having just installed OpenSuse 11.3, NetworkManager identifies my wireless network, but repeatedly fails to make a connection. Without further ado, here are the outputs to commands requested in the first sticky thread:
[Code]....
View 7 Replies
View Related
Apr 20, 2009
I have recently installed Fedora 10 onto my PC, dual booting with XP, and I am fairly new to linux. I have been trying to connect to my wireless network, but cannot even get Fedora to recognise my wireless adapter (Belkin N1 +MIMO). I have tried to follow a few tutorials that go through either the ndiswrapper method or by using native drivers. Because I don't have an internet connection on Fedora, I have to boot into XP to download the files for either ndiswrapper or the native drivers, rather than installing using the terminal.I downloaded the ndiswrapper RPM, and it failed because of an 'unexpected error', and when using the tarball, it could not find the makefile. The native drivers did not install because of unresolved dependencies.
View 11 Replies
View Related
Aug 16, 2010
I have successfully set up a cable internet connection in Ubuntu (created a new DSL connection by typing login and password and connected the cable - it worked). But I have no idea how I can set up a wireless internet connection.I have a wireless access point TL-WA501G, laptop and a cable internet connection with fixed IP address.My laptop can see the wireless access point. But I really do not know how to make it all work and what to start from.
View 2 Replies
View Related
Mar 4, 2011
I am new to Fedora have not used it in many years. I have zero networking knowledge. I read several threads on getting the RT 2870 USB connection working. But had no joy after install the three rt2870 kmod items from RPMFusion and rebooting. get this first step in networking done right?
View 5 Replies
View Related
Feb 13, 2010
I am a recent convert to Ubuntu 9.10. I have installed it on my by travel laptop, which is docked when at home with a 22' ViewSonic screen.
Under Windows all is good, I just plug it in and whamo, I can close the laptop lid and use the Viewsonic as my primary screen.
Under Ubuntu, it appears the above is impossible. I seek your guidance as below.
Q. Is it possible dock my 22" screen as my primary screen with my laptop?
Q If it is possible, how do I do it?
View 2 Replies
View Related
Jan 17, 2010
I have Installed Fedora12(and also Vista and XP). When I switch on, a screen appears telling "Enter any key to Enter Boot Menu"(as I can remember)for about 3 seconds and then starts Fedora12 automatically.I want to change it and make Windows 7 as my primary OS or I want to see directly the bootloader first(not the 3 seconds message).
View 8 Replies
View Related
Mar 23, 2011
setup - one primary dns and one slave dns. zone transfer works, internet works, dig lookup works. if i bring down the primary, everything stops working. should'nt the slave dns pick up the slack when the primary dns goes down.
zone "2.168.192.in-addr.arpa." IN {
type slave;
file "slaves/192.168.2.db";
[code]...
View 3 Replies
View Related
May 29, 2010
I have two monitors, the internal LCD of the laptop, and an external 23". It is working well, but sometimes dialog boxes pop up on the laptop screen inconveniently. The Gnome panel is on the big screen. For example, Firefox is running on the "main" external big screen, I select Edit|Preferences and the dialog box comes up on the laptop screen. 9.04 didn't do this. Is there a primary monitor setting or something to fix this?
View 1 Replies
View Related
Aug 24, 2009
I have setup Ubuntu servers as LAMP machines but that's pretty much it.
I need to work on an existing CentOS server that I will see for the first time tomorrow. I am told that, as of right now, it is "just serving the internet." The goal is to set it up to be a primary domain controller by which I mean:
1) A user should be able to login to the server from any of the workstations and then see their server stored documents
2) The clients will be a mixed bag of Linux, Windows and Mac machines
I could use a push in the right direction as to what I need to do to get this all setup. I know how to setup users and home folders (I use webmin typically and I understand that there is a version for CentOS) but clearly there is more that I need to do. I am really curious as to how I would map the necessary drives on the client machines upon login and have the users have automatic access to their data regardless of the client machine they log in to.
View 4 Replies
View Related
Mar 12, 2011
I just installed primary dns server now want to install new slave server so that in case if primary fails secondary can take requests.
View 3 Replies
View Related
Aug 5, 2011
I have Dell Inspiron 1545. It works fine on wired but fails on wireless.
I am using wicd as an interface.
It always comes up with the following error: Connection Failed: Bad password.
I have checked the passwords in both wicd and the router.
They seem to be the same. Am I missing something ?
View 5 Replies
View Related
Dec 7, 2009
I'm having some issues upgrading my F9 to F12 using 'preupgrade' so I'm looking for anybody who has ever been able to complete a preupgrade from F9 x86_64 to F12. The error message I receive is TypeError: Parsing primary.xml error: attributes construct error. To my knowledge this has been reported as a bug in F10 which was resolved by a yum update to version 3.2.24.
For F9 the latest yum version is 3.2.21 which has this Parsing error bug that prevents the preupgarde to continue. Interesting enough that the preupgarde lets me select Fedora 12 and progresses with all the preupgrade steps properly until the parsing error occur. How to fix this Parsing error on a F9 x86_64 system.
View 5 Replies
View Related
Aug 19, 2010
I have an ASUS 1000HE laptop running Lucid 10.04 (Desktop not netbook version) which I have connected to an external display (LCD). I don't intend to use the laptop by itself anymore therefore I have configured the display properties to turn off the laptop display and use the external display as primary. However, when the PC enters 'locked mode' or the display powers down after a defined period of time (as set in the properties) when I wake the PC and the display, it turns the laptop monitor back on .... switches the laptop screen to primary display (i.e. with the panels etc displayed on it) and extends the desktop to the external display! The only thing I can then do is go back into the configuration utility and turn the laptop monitor off again and boom, everything is fine and dandy displaying on the external display again! I don't really want to have to do this every time I come back to the PC after it has been locked nor do I want to write a script (if it can be avoided) to deal with it!
View 2 Replies
View Related
Oct 28, 2010
Kernel 2.6, Slackware 12.0
mkisofs 2.01
I do 'mkisofs -iso-level 1 -o image John Smith.txt'. Only an example. When I mount image, ls outputs john_smi.txt. So it has shorten to 8.3 and translated ' ' into '_'. This is in accordance with the manual, although it doesn't say the conversion will be done.
Quote:
-iso-level level
.........................
With all iso9660 levels from 1..3, all filenames are restricted to upper case letters, numbers and the underscore (_).
...........................
However, as it did not reject the file name, it should have converted it to all upper case, it seems to me. And -iso-level 2|3 does the same thing.
Code:
root@darkstar:~# mkisofs -iso-level 1 -o image John Smith.txt
Total translation table size: 0
Total rockridge attributes bytes: 0
Total directory bytes: 0
[code]....
View 5 Replies
View Related
Nov 12, 2009
Each time I start up debian -lenny, the network-manager does not automatically connect me to my wireless network. The connection list shows a lot of networks available, but mine is always absent from the list. This means I each time have to go to "Connect to other Wireless Network" in and write in my network name (SSID) and password (PWA2 Personal). Then is connects nicely and everything works fine until next time I boot
View 5 Replies
View Related
Jun 25, 2010
I would like to have all traffic from the ethernet connection out through the wireless (basically using the box as a router) however I am having some trouble doing this.
I have done this before on Windows however I am having some trouble doing this on linux, I have tried using Squid Proxy however I am having some trouble using configuring/using it.
I am using Yellow Dog Linux however I am willing to change to any other distro as long as it is compatable with PS3 (as this is what im using linux on)
View 14 Replies
View Related
Apr 1, 2010
I have just installed Linux Mint 8 Helena & it appears to be working well alongside my xp system. The problem I do have is setting up the much needed broadband connection. I have an adsl speedtouch330 usb modem, with tesco.net as my server, which works just fine on xp hence this mail. Am I missing something obvious, or have I got myself into depths much deeper & complex than I thought.
View 5 Replies
View Related
Mar 1, 2011
I am familiar with windows 2008 cluster servers, and I just started testing with centos cluster. I am creating a simple 2-node cluster, for a simple ping test.
Node 1: 10.0.0.1
Node 2: 10.0.0.1
Virtual ip: 10.0.0.10
So far, I can ping a virtual ip, and manually relocate it between the nodes, but I didn't figure out, how to do this automatically. So this is my question: How can I setup the cluster, to it automatically failover the a service to another node case one node fails?
View 1 Replies
View Related
