OpenSUSE Wireless :: Wifi Connection Fails After The Recent Update?
Jul 8, 2010
Recently I updated my openSUSE 11.2 and I'm not too sure what all were the recent updates but I suspect networkmanager also got updated. After I restarted my machine, my laptop fails to connect to the wireless access point. I tried both in gnome as well as KDE but the same error. This is the log I found in my /var/log/NetworkManager which I believe should give some pointers.
Code:
Jul 8 15:08:42 AshSuse1520 NetworkManager: <info> Activation (wlan0) starting connection 'Buckeye Plaza'
Jul 8 15:08:42 AshSuse1520 NetworkManager: <info> (wlan0): device state change: 3 -> 4 (reason 0)
Jul 8 15:08:42 AshSuse1520 NetworkManager: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
[Code]....
I did a search of this error in google and all I got were few results which complained about bugs in some debian distro.
My wireless card works fine and so does the access point I try to connect to since my Ubuntu installation is able to connect fine as well as my windows Xp.
View 5 Replies
ADVERTISEMENT
Feb 25, 2010
Updated occurred yesterday and installed new ppp on my F12 box. my previously working, stored PPTP profiles under network manager failed to connect claming some thing about security credentials wrong.) downgraded (yum downgrade ppp) , rebooted and its working again. Im not sure where the real problem is, can "the gods above" or below either forward this to the apporpriate bug tracker (packager, testing, redhat, who owns ppp? network manager?) so this is fixed or downgraded in the next F12 update cycle?
View 2 Replies
View Related
Apr 2, 2011
I have installed Suse 11.4 recently and I'm trying to run the wireless connection and doesn't works.
Details:
card: pro/wireless 2200BG Calexico2
driver installed (as console said) kernel driver:ipw2200
hwinfo:
Code:
linux-4pom:/home/victorplata # hwinfo --netcard
25: PCI 604.0: 0282 WLAN controller
[Created at pci.318]
Unique ID: JNkJ.BmKY+aW7YM0
Parent ID: 6NW+.pbi2aV6ikBD
SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:06:04.0
SysFS BusID: 0000:06:04.0
Hardware Class: network
Model: "Intel PRO/Wireless 2200BG [Calexico2] Network Connection"
Vendor: pci 0x8086 "Intel Corporation"
I have tried to connect by traditional method with YAST, just recognized one network call "Hotel Riga 228", but doesn't connect. Also I have tried to connect with Network Manager but this application doesn't recognize ANY w. network.
View 6 Replies
View Related
Aug 13, 2011
I have a dual boot system : Windows XP SP3 and openSUSE 11.4 64 bits, GRUB for boot loader.Having had problems with my NVidia driver (computer hanging all the time), I reïnstalled openSUSE 11.4 from DVD.Since then : no more wireless internet-access, which functioned very well before.
Code:
/usr/sbin/iwlist scan
lo Interface doesn't support scanning.
[code]....
View 1 Replies
View Related
Dec 24, 2010
The WIFI adapter is working, WIN driver is in use (with ndiswrapper). Linux driver doesn't exist. No issues until computer does to Sleep mode. Then just reboot it. Some times iwconfig commands helps.
View 4 Replies
View Related
Oct 17, 2010
I've installed opensuse 11.3 few days ago on my laptop, and it seems after kernel update, wifi refuses to work. I'm using gnome and after the update the iwlagn module was not present in the 'ifup'. So i run modprobe iwlagn and here is the output.
View 3 Replies
View Related
Jan 5, 2010
In summary, I am using openSUSE 11.2 x64 on an Acer laptop with a wireless AR928X card. I can connect to my WEP-secured network when I boot up. After some time (it might be minutes, it might be hours), I am prompted for my WEP password again. This never works, despite being the one which gets me on-line at start-up!. The only solution is a reboot. The problem is intermittent and doesn't seem to depend on my on-line activity. I have tried the following with the same result:
KNetworkManager
Traditional using IFUP
Enabling / disabling IPv6 support
I tried installing the compat-wireless package through YaST and then managed to get no internet connection at all. Went back to KNetworkManager and things "worked" again until I was prompted for the WEP code. I have openSUSE 11.2 x64 working on my office laptop without problem and can connect to my home network without any problem. My issues are with my personal laptop. I have reached the stage of booting into Windows 7 as my default option so that I can access the internet reliably. What I can do to diagnose and repair the problem - could it be that the card is going into powersave mode? If so, how do I stop that happening? I'd prefer to be on openSUSE but need to be able to rely on the internet.
View 9 Replies
View Related
Jun 19, 2010
I have two laptops. First one is connected to my ISP via Ethernet connection. At the same time it serves as a wireless router for the second laptop (ad-hoc connection). Multicast routing is managed by igmpproxy. Everything works fine, except that multicast traffic rate on the second computer is very low (1 MBit/s), its too slow for watching television.
After some searching I found that this multicast rate is always minimal one for certain type of WiFi connection (802.11bg in my case) https://lists.ath9k.org/pipermail/at...il/003393.html. For some WiFi kernel modules its possible to set multicast rate by setting appropriate module options. But its not the case with ath9k.
WLAN configuration on the "router" laptop:
Code:
iwconfig wlan0 mode ad-hoc
iwconfig wlan0 key 1111111111
iwconfig wlan0 channel auto
iwconfig wlan0 rate 11M
iwconfig wlan0 essid WHATEVER
how to increase multicast rate on the second computer?
View 2 Replies
View Related
Dec 2, 2010
No improvement since I first reported this problem, I am hoping somebody can now advise.
Using openSUSE11.3 Linux 2.6.34.7-0.5-default i686 with kde 4.4.4 release 3.Problem is the wait of sometimes over 2 minutes before the wifi connection is available.Two questions:-
1. Why does it take so long? Longer by far than it to be with previous openSUSE releases. Much longer than with that other OS!!!2. How do I remove the wallet process. Not needed in present environment so I would like direct connection without having to open wallet. I didn't set this up, it just happened after I had upgraded to 11.3 and I need to know how to disable it to save time.
View 8 Replies
View Related
Sep 26, 2010
Having just installed OpenSuse 11.3, NetworkManager identifies my wireless network, but repeatedly fails to make a connection. Without further ado, here are the outputs to commands requested in the first sticky thread:
[Code]....
View 7 Replies
View Related
May 30, 2011
I have recently upgraded to 11.4 and also had to renew an AP (HP ProCurve 10ag). This was several years old but replaced an identical model which had been working well until recently. I thought it would be appropriate to flash newer firmware as the device four releases behind the times. The access point serves partner's XP laptop and my openSUSE 11.4 laptop and after flashing the firmware both machines would make a connection and then break and remake, to the extent that the openSUSE machine became unusable. I thought it was an encryption problem and spent hours changing the AP and Client setups to no avail
After reading a thread here I checked out dmesg and this is what I found:-
[78.639247] wlan0: authenticate with 00:1d:b3:4b:ae:14 (try 1)
[78.640804] wlan0: authenticated
[78.642507] wlan0: associate with 00:1d:b3:4b:ae:14 (try 1)
[78.651195] wlan0: RX AssocResp from 00:1d:b3:4b:ae:14 (capab=0x411 status=0 aid=1)
[78.651200] wlan0: associated
[78.652222] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[78.652283] cfg80211: Calling CRDA for country: DE
[78.674378] cfg80211: Regulatory domain changed to country: DE .....
This went on and on.
View 7 Replies
View Related
Sep 4, 2010
I have an EEE 1000 that successfully connected to WPA networks until yesterday. I tried re-installing the RT2860 drivers that had been previously modified and did not have success.
Additionally, I just installed 10.04 on a Gateway laptop that's a few years old. It immediately connected to the WPA network and I ran the updater. Lo and behold, after updating it no longer connects to the network.
View 4 Replies
View Related
Feb 18, 2011
This sux cause im new to ubuntu and it was working great on my laptop but after a recent update the wireless (wifi) connection just dies after 1 minute. The connection is still active, the icon shows full signal, nothing seems wrong at all, but there is no internet communication at all.
If I disconnect and reconnect I get proper internet comms for another minute, then it goes dead again!
This all started after a recent series of updates.
Computer:
Toshiba Satellite L505D-S5965
AMD Athlon X@ Dual Core QL-65
ATI RADEON 3100
Realtek RTL8187SE Wireless 802.11b/g 54Mbps PCIE Network Adapter
Realtek audio
Software:
Dual boot Vista (original factory installation) ubuntu added 2nd
All the latest kernals and non-beta releases as of 02/18/2011
I was almost ready to go all ubuntu, but I had to log back into vista to get internet to try and find help. ubuntu has been like this for weeks, but i havent had the time to try and find out what screwed the pooch on my wireless....
View 2 Replies
View Related
Nov 27, 2010
I am running Ubuntu 10.04 on a PackardBell notebook and have just got an Orange Livebox 2 for broadband connection(after years of dial-up as no adsl in my area).
I am trying to connect via WiFi to the Livebox to configure, but neither NetworkManager nor Wicd will connect. NM sees the Livebox but simply fails to connect after trying; Wicd says "Bad password". The WPA2 password I have entered is definitely correct, and I have connected without any problem from an AcerOne under Linpus.
I have also tried to connect using Wicd and an ethernet cable, and this doesn't connect either, returning "Connection Failed: Unable to Get IP Address"
View 9 Replies
View Related
Nov 27, 2010
I am running Ubuntu 10.04 on a PackardBell notebook and have just got an Orange Livebox 2 for broadband connection(after years of dial-up as no adsl in my area).I am trying to connect via WiFi to the Livebox to configure, but neither NetworkManager nor Wicd will connect. NM sees the Livebox but simply fails to connect after trying; Wicd says "Bad password".The WPA2 password I have entered is definitely correct, and I have connected without any problem from an AcerOne under Linpus.I have also tried to connect using Wicd and an ethernet cable, and this doesn't connect either, returning "Connection Failed: Unable to Get IP Address"
View 1 Replies
View Related
Mar 24, 2010
Microphone used to work well, but now it does not Indicator in Gnome sound properties does not move and there is no sound in Skype.
View 2 Replies
View Related
May 12, 2011
my system stopped booting after recent update.When I select desktop it goes to splash screen an dies.Have to hit reset key.If I select nomodeset it boots fine excepts graphic resolution is 1280x1024 instead of 1680x1050.System is sandy bridge, Asus P8H67-M EVO, Intel Graphics enabled no other grapics cards, Suse 11.4 64 bit.I do my updates with zypper up.
View 9 Replies
View Related
Aug 11, 2010
I am using Ubuntu 10.04 64bit but so far all attempts to connecting over wireless give the same end result "VPN Connection Failed" from the [URL] at the end of the page as a link to a blog [URL] first problem is I can't restart network manager
Code:
sudo /etc/init.d/NetworkManager restart
return command not found, but if I use this
Code:
sudo service network-manager restart
works, maybe the problem of this connection is because I attempt over wireless.
View 1 Replies
View Related
Nov 4, 2010
Toshiba notebook is set up to triple boot win7, mepis 8.5 and os 11.3.Recent update of os11.3 left system with boot failure, "file not found".I booted mepis and used utility to reinstall grub, but no joy.
Appeared to install ok but on reboot, sda5 identified as 'mepis' not os11.3 and would not boot. Win7 & mepis boot ok.
Next, booted live Parted Magic and repaired as per another thread here, but again, no joy.NONE of the systems will boot.Rebooted mepis live cd and reinstalled grub again. Sda5 still identified as mepis and will not boot. Win7 & mepis boot ok.
View 3 Replies
View Related
Mar 19, 2010
Using an old (5 year) laptop with XP loaded I installed wubi to save altering partitions etc. It all downloaded fine and connected to the internet by wire. I set up the wireless connection using WPA but could not connect. The wirelsss card does see my network and others. After lurking around the forum and trying various things I found that I could connect without encryption. The more I read the more I became confused.
Anyway what I could glean about my Wireless Card it is a Intersil Prism2 mini usb adapter - but also shows up as an Acer ?? Warplink 802.11.
Using lshw I found this reference to wireless
I became even more confused and got a bit lost using the various codes in the terminal and looking up things about drivers etc but would like to persist.
View 1 Replies
View Related
Aug 22, 2009
My wireless worked perfectly on my clean install of Fedora 11. However, after the system update, my wireless continued to work perfectly for about ten minutes. Then it dropped the network connection. however, it still says that it is connected, although I cannot load any web pages, nor get email, nor connect to anything at all.When I reload the connection it continues to say it is connected, after prompting for the password that used to be saved and used automatically. It now works for maybe a few seconds at a time, loading part of a web page, then stopping.
View 4 Replies
View Related
Sep 21, 2010
when I launch Yast2 - Online Update, I get an error during the repository refresh that it could refresh the repository.Since it's easier to copy-paste - here is the output from 'zypper ref' with the same error:
Code:
Retrieving repository 'Updates for openSUSE 11.3 11.3-1.82' metadata [|]
Failed to download ./repodata/cefcc9d56264aa169f70a53c560ffc39cb6af575-deltainfo.xml.gz
from http://download.opensuse.org/update/11.3/
A[code]...
View 8 Replies
View Related
Jul 2, 2011
I have a device that is only accessible using wireless. By default it starts an ad-hoc wireless I can connect to. The problem is there is no internet access on the ad-hoc. So I'm connecting it to my router using the commands (its a gnu/linux):
iwconfig ath0 mode managed essid "ESSID"
ifconfig ath0 192.168.1.25 netmask 255.255.255.0 up
route add default gw 192.168.1.1
I want to add it to start up script but I don't want to get locked out of the device forever if something happens to the router (its really old). Is there any way to check if the connection failed and create an ad-hoc instead if it failed?
View 1 Replies
View Related
Mar 24, 2010
A recent kernel update seems to have misplaced the Kernel Headers. VMWare needs these headers and cannot find them. Attempting to run VMWARE gets the message: Kernel headers for version 2.6.31.12-0.2-desktop were not found.
View 4 Replies
View Related
Jun 18, 2011
i have a dell 1501 that has been upgraded from 10.10 to 11.04. everything was working okay. and then the user ran an upgrade recently. subsequently the wifi has mysteriously stopped working. it connects okay if one plugs it directly into the router but the wifi seems to have just stopped working.my mini 9 connects fine to the netgear wifi router using wireless.when i run the system tests for networking i get the errors..."root could not find def gateway info /proc""root could not find default gateway by running route"here is the output from some diagnostic commands.NOTE:this is similar to a post titled "wi-fi dead?" but the output is not quite the same...
lauren@lauren-Inspiron-1501:~$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
[code]....
View 3 Replies
View Related
Dec 2, 2010
I have a machine with a fresh install of fc14. When I first created the machine about 3 weeks ago I could attache my iPhone 3GS and FC14 (gnome) would detect it and I could use shotwell and rhythmbox fine. Ya!
Now as of about 1.5 weeks ago, when I plug in my phone I get a pop up with : Unable to mount Brian's iPhone DBus error org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus) dmesg doesn't show any errors, just that an iPhone was attached. Is this just me or are others seeing this? Any ideas as to what might be wrong?
View 1 Replies
View Related
Aug 5, 2011
I have Dell Inspiron 1545. It works fine on wired but fails on wireless.
I am using wicd as an interface.
It always comes up with the following error: Connection Failed: Bad password.
I have checked the passwords in both wicd and the router.
They seem to be the same. Am I missing something ?
View 5 Replies
View Related
May 22, 2011
I have a Huawei E173u-2 mobile broadband usb stick. It is recognised as a gsm-modem and shows up as such in the networkManager-plasmoid. I have set up the connection details for my ISP (O2), but I can't connect. When I click on the connection, "signal strength" is shown as well as "operator" (o2 - de). The "connection state" changes to "Preparing to connect", then "Setting network address". Then the modem vanishes and comes up again a few seconds later.
Here is the log (/var/log/messages):
Code:
It seems like there is a connection for about 5 seconds, then the modem hangs up and restarts .
The stick works fine with our windows netbook, so I don't think it is a hardware failure.
How do I get this working?
My system:
opensuse 11.4
kernel 2.6.39-30-desktop (2.6.38 gives the same error)
kde 4.6.3
plasmoid-networkmanagement 0.9.svn1192577-168.6
View 2 Replies
View Related
Jan 6, 2010
I have 2 laptop with opensuse 11.2. One of them is connected to the Internet through a Mobile Connection with a CDMA/EDVO modem on the usb port. I want to share the Internet connection with the other laptop through the WiFi interface of each of them. How should I proceed?
View 3 Replies
View Related
Nov 21, 2010
I have a problem: when I log in with my account NetworkManager doesn't connect to my home WiFi connection, cause it wait for authorization. No change if I try to retype the connection password, it still wait for authorization!
View 9 Replies
View Related
