Im relatively new to Linux - just started working with it this week - and Im having some trouble setting up NFS. We have a 12 computer cluster running open SUSE in our lab at school, and I am trying to troubleshoot the NFS system we have created.My basic question is this - I want to find the file that sets whether or not the NFS server and client processes run on setup. Google indicates that in most linux installations, these settings can be found in the /etc/rc.conf file. I cant find this file in open SUSE, so what Im trying to figure out is where I would find the equivalent commands in open SUSE. I am basically trying to find the lines highlighted in this: <http://www.freebsd.org/doc/handbook/network-nfs.html> article are stored. I already know how to enable/disable the NFS server/client using YaST in the GUI, but I would prefer to find the file directly, as changing the settings in the GUI involves plugging a monitor, keyboard, and mouse into each of 12 boxes, and is very time consuming. I can change files straight from the terminal command line - much faster.
Additional background:
We are using NFS in two ways on our cluster - firstly, we have installed the software package (Fluent) on the host computer, and then setup the host to share this folder with the 11 slaves. To do this, we set the host as an NFS server, with the 11 slaves as NFS clients of this folder.
Secondly, we have setup working folders on each of the slaves that we would like to use to store data (each computer has a 1.5TB drive inside). To do this, we have set each of the slaves as an NFS server, sharing the working directory with the host computer, which we setup as an NFS client of each of these 11 working folders.
The problem that I am experiencing is that each of these two things works properly by itself, but when we try to use a computer as both an NFS server and an NFS client at the same time (albeit to different folders), neither works.Any thoughts on how to move forward in troubleshooting this? My current plan of attack is to unplug all of the slaves except for one from the network, and try to get a single slave to communicate properly with the host. Once I get the first slave running, I was going to add additional slaves one at a time until they were all working. Thoughts?
I am trying to Install Open Suse 11.3 (burned as an ISO DVD) along with existing Win 2008 R2 OS. When I try to boot from the DVD it just logs in to Win2008 though boot from CD/DVD is enabled in the boot sequence. So i tried to mount the ISO and run from Windows ! BUT I get an error before installation starts telling that Win2008 R2 is not supported in open suse installer! Is there anything I can do to overcome this and install/retain both OS? In fact I am even trying to c hange my win2008 from R2 to Enterprise to see if I can overcome the problem!
I am accessing a program through X11. My OS is Suse 10.3. However when I access this program, the menu bar title are not letter but a string of characters of "[]". I need to find a way to perform a character setting for X11 using SUSE.
i have installed SUSE 11 recently and have set the domain name and netmask using YaST settings after installation.But, the domain name is empty after rebooting. I have verified this using domainname command from terminal. But, in Network settings it is there.I think the system is not picking up the domain name from YaST settings.
OK... I tried everything i could think of... but i still cannot get my Open SUSE 11.1 to mount my samba share at boot! I still don't understand the 11.1 boot sequence. can NE one help me... tell me what files to give you output from... Ty guys P.S. My shares originate from a Windows Server 2003 RC2 machine, and it's dns server doesn't work correctly... so my mount command is
mount -t //192.168.x.x/files/ /nET/ -o username=linux,password=xxxxxx please let me know what other info you need... I don't have the internet, so it will be tommorow b4 i see this again!!! Thanks
When i am adding a user using "useradd -d /home/test test" or "useradd test", it is now creating the home directory, whereas when i am using the graphical mode and going through several menu options, i am getting the home directory.
We are very new to linux.would you plz give me the installation procedure of ns2 in open suse..I have tried some procedure found in linux forums.The following problems arises
1.yum command not found in step 1.
2.on skipping step 1 ,i tried step 2 where on ./install command it gives.
I want to setup a NTP server on open SUSE 11.1. But I don't know whether it has been supported in the system, or it needs me to install a software manually.
BACKGROUND: After years of having an idle machine with Linux on it, I want to use it everyday. My preferred distro is Debian Lenny. It is running on a 1999 Compaq that I want to use for testing. So far, configuration has been logical and steady.
PROBLEMS: So far, only Suse will install completely on my newer machine.
Fedora and Knoppix were also tried, and did not work.Where should I look to begin to troubleshoot this? This is not a rush job. I have time to do one or two things per day.
I have a PC with OpenSuse 11.1. Beside root there are two other users on the system. Now I have installed a new PC with OpenSuse 11.2. Only one user is set up until now. I installed the hard disk from OpenSuse 11.1 into the new PC on IDE Primary Slave, because I wanted to copy some files from the old system. OpenSuse 11.2 has mounted the old disk automatically in /media/disk and /media/disk-1. The problem is that I can't find any files or directories from the users. I could find only one file from root in /media/disk-1/root/Desktop. Why can't I see the files? Does it have anything to do with UID or SUID?
how to install ms office in open suse kde3.5 ,i need the procedure to get it done, i have a problem with updating and extraction of wine 1.1.35 while playonlinux is trying to instal msoffice can anybody sugest a soln fr it.
I have a Dell Dimension 4400, 8 yrs old. It is set up to boot to either Open Suse 11 or Windows. I turned on the machine this morning, it booted very slowly. My screen says, "GRUB loading stage 1.5" then it says "Error 21." I can not go beyond this screen. My machine is stuck here.
I have problem with network on my laptop. Networks status is Active and Online but i cant open any pages. (was working until installation openSUSE on ext HDD)I already try both wireless/wired connection but nothing.
How con i install win32 codecs (free)in 0pen suse 11.... I have got gstreamer codec pack but on compiling it says missing packages like c, gcc, glib...etc...how can i get them from where do i get them....
i installed adobe flash player (install_flash_player_10_linux.tar.gz)on linux open suse 11.1. But it doesn't play vedio etc on you tube,it says that this is old version of flash player. I reinstalled it ,even then it says old version of flash player.
I am rebuilding / updating my internal server. It is strange to me that 11.0 will not install on this ASUS M3A78 MB but 11.2 will go through. I am setting up the ntp server and run into new things, ntpdate is not used anymore so you have this long string : sntp -P no -r pool.ntp.org which does the same thing or a couple of other calls that may work. It seems that pool.ntp.org will not work however so I switched to another time server.
pool.ntp.org does work on 11.0 however, it still uses ntpdate atm.
I can use ntpdate to my server from other clients and get the time but I can't use Yast to set it up, it hangs (or maybe it will eventually time out) when you test the server in the gui tool. rcntp ntptimeset comes back with no server reached on the ntp server machine so I am not confident that it will auto update itself, which I think is an issue, the server will not respond to client queries after a day or two.
I am setting up a PDC using suse 10.1 but I get the error(failed to modify entry:
structural object class modification from 'sambaDomain' to 'inetOrgPerson' not allowed at /usr/sbin/smbldap-populate line 464, <GEN1> line 21.) when I run /usr/sbin/smbldap-populate command linux-5r4o:~ # /usr/sbin/smbldap-populate
I just installed Suse 11.3 64bit on a new build. My video card is a nvidia gt240. I am using the default drivers. My monitor is a NEC 17" LCD.
When I boot up the screen resolution defaults to 1280x1024. I can go to applications>configure desktop>display and set it to 1024x768, which is my resolution of choice, and it works until I reboot or log out and log back in, then it resets to 1280x1024.
I would like to make 1024x768 the default so I don't have to keep changing it. Is there a way to do this? The output of xrandr looks like this:
$~> xrandr Screen 0: minimum 320 x 200, current 1024 x 768, maximum 8192 x 8192 DVI-I-1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 338mm x 270mm 1280x1024 60.0 + 1152x864 75.0 1024x768 75.1 70.1* 60.0
[Code]...
Is there something I can change to set a new default resolution?
I have a Dell Windows7 PC configured with BIOS RAID1. I want to install SLES10 and configure it with Software RAID1. My question is: Do I need to reconfigure the BIOS RAID setting and if so What should it be.
I want to attach disk with Suse 11.2 to another motherboard with Integrated ATI Radeon HD 4290 GPU ( at the moment I am using Nvidia GeForce 6800). How can I change settings for new video chip?
The suse 10.0 64 bit partition on my box stops booting when it is setting up the cmos clock. The suse 10.0 32 bit partition boots up without a problem. I never had a problem with the suse 10.0 64 bit partition up until now. Is it possible to fix the problem using puppy linux and editing a configuration file? I do not think it is a hardware issue if the other partition on the drive boots up. Would puppy linux be a good way to backup files from this partition or can I mount the partition using the 32 bit os?
