I am setting up a PDC using suse 10.1 but I get the error(failed to modify entry:
structural object class modification from 'sambaDomain' to 'inetOrgPerson' not allowed at /usr/sbin/smbldap-populate line 464, <GEN1> line 21.) when I run /usr/sbin/smbldap-populate command
linux-5r4o:~ # /usr/sbin/smbldap-populate
[code]....
I just installed Suse 11.3 64bit on a new build. My video card is a nvidia gt240. I am using the default drivers. My monitor is a NEC 17" LCD.
When I boot up the screen resolution defaults to 1280x1024. I can go to applications>configure desktop>display and set it to 1024x768, which is my resolution of choice, and it works until I reboot or log out and log back in, then it resets to 1280x1024.
I would like to make 1024x768 the default so I don't have to keep changing it. Is there a way to do this? The output of xrandr looks like this:
$~> xrandr
Screen 0: minimum 320 x 200, current 1024 x 768, maximum 8192 x 8192
DVI-I-1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 338mm x 270mm
1280x1024 60.0 +
1152x864 75.0
1024x768 75.1 70.1* 60.0
[Code]...
Is there something I can change to set a new default resolution?
I need to setup NFS between a RedHat server and a SUSE client.
View 1 Replies View RelatedI tried to install suse 11.3 but every time the system shut down in the install process it never finish
I think that the FAN does not work
I have an Acer Aspire 5720z
I am trying to Install Open Suse 11.3 (burned as an ISO DVD) along with existing Win 2008 R2 OS. When I try to boot from the DVD it just logs in to Win2008 though boot from CD/DVD is enabled in the boot sequence. So i tried to mount the ISO and run from Windows ! BUT I get an error before installation starts telling that Win2008 R2 is not supported in open suse installer! Is there anything I can do to overcome this and install/retain both OS? In fact I am even trying to c hange my win2008 from R2 to Enterprise to see if I can overcome the problem!
View 9 Replies View RelatedI have a box already has openSuse 11 32bits installed. I want to replace it with openSuse 11 64 bits. When I insert the openSuse 11 64 bits CD, I got error message "this is a 32 bit computer. Can not use 64 bit software". so How do I wipe out the old OS (32 bits), and install new OS (64 bits)?
View 7 Replies View Relatedi have a backtrack install that i would like to keep while installing suse for an everyday OS; i start the install process but when it gets to partitioning the hard drive, it doesnt seem to recognize anything already being on there; it just gives me the setup for suse, ie:
sda1 ext3 = OS sda2 or sda5 = swap. do i have to configure a partition scheme? i installed ubuntu on a desktop alongside windows very easily due to grub graphical install/partition; is there not a similar function for suse?
I have installed Suse on my Windows Vista 64bit machine a couple of times, but the last time I did it - after a disk change - presented some unanticipated problems. Prior to install, Windows Disk Management (whose output I was unable to paste into this question) showed that my disks were laid out as follows:
[Code].....
Disk 0 is a Seagate ATA drive, while Disk 1 is a Western Digital Ext HDD Usb Device. Looking back, I think I should have carved out a partition after M before installing Suse, but I was uncertain whether to make it a logical one or a primary, and in the past the installation has taken the 25 or so gig it needed from the last defined partition on disk 0. This time, however, it went after disk 1, and reformatted the entire drive, deleting about 300 gig of user data, including my system backup. What really suprised me is that it took up the entire drive: 2 gig for the swapfile, then a 20 gig partition, and all the rest for the third partition.
This is not what I would have expected. I especially would not have expected the installation to re-format user data. In any case, I did not want Suse on disk 1, so I reformatted the drive and then used my Partition Manager to rebuild the boot Mbr. So now, I am able to boot into windows, do not have Suse on my machine, but have lost critical data. My disks are now back to the way they were when I started (see above), except that drive F is now all free space, except for my latest backup. My question is how do I ensure, when I reinstall Suse, that it will choose disk0 for the installation and will not overlay any of the data that I have on that drive.
Gnome is falling apart and I've had a lot of nagging problems that I couldn't overcome.I'm thinking of wiping the OpenSuse partitions and doing a clean install without wiping the windows partition.I initially setup using the 11.0/XP dual boot FAQ in the How To forum.I have my Home directory backed up on an external HD. Might try KDE next go-round or KDE & Gnome as separate users. I have 11.2 i586 installation DVD.
View 2 Replies View RelatedI have just downloaded a mirror copy of SUse 11.2 and formatted my hard drive, so i can install the linux OP. But it seems like that it is not readable or better to say the boot from CD-rom does not work! Am i on the right track here? How do i go by installing a Linux on a fresh hard drive?
View 2 Replies View RelatedI built a new pc and want to have Suse again. Unfortunately Suse installation does not recognize my CD/DVD device. So I boot from DVD select installation and a few moments later there's a popup 'make sure cd number 1 is in your drive'. I also did try to load other kernel modules but nothing helps. The only drive which is always recognized is floppy drive.
Here are some details about my system: Asrock P55M Pro board, Intel P55 chipset, 2 SATA HDD's, IDE NEC 2510 DVD writer, BIOS is set to AHCI due to Windows.
I tried following:
Use Suse DVD 11.0, 11.2, x86 or x64
Set BIOS to AHCI, IDE (compatible), IDE (enhanced)
DVD writer NEC was used in my former pc and did install 11.0 without probs.
Installing from HDD is new to 11.2 thus I copied the DVD to a directory. During Installation I can select the correct partition but suse is not able to find repositories.(?)
I have installed windows 7 in my laptop. i have only c drive with a memory space of 284mb. now i like to install suse 11 in c drive itself without distrubing windows 7. after installing i should be able to go for either windows 7 or suse 11 easily. i must have the both. I had partitioned windows 7 in fat. i had not use ntfs.
View 1 Replies View RelatedHave burned a DVD of 11.4 64bit and am trying to install alongside Windows 7. The boot from the disk starts, I get a SUSE splash screen and initial menu. I check install source (F4) is set to CDROM. When I then select "install" the kernel loads, but then it goes wrong. Whatever I do I get "No repository found". It's almost as though, having loaded the kernel from the DVD, the installer can no longer see the disk.
View 9 Replies View RelatedI am trying to install a Java based game to try it out and i keep getting a crash report can anyone assist me with getting this to work?
Code: Unexpected crash while launching login The error was: <null>
It's possible you might figure out what's wrong from the log file below.
Contents of temporary launch log:
Time is Mon Mar 28 06:40:58 EDT 2011
Running client version 2.7.5g
System information:
Executing from /home/jerry/Documents
Operating system: Linux (arch: amd64, version: 2.6.37.1-1.2-desktop)
Java version: 1.6.0_20 (Sun Microsystems Inc.) <http://java.sun.com/>
Jvm version: 19.0-b09 (Sun Microsystems Inc.) [OpenJDK 64-Bit Server VM]
Available CPUs: 2
Main thread exiting.
CLIENT CRASH
I am rebuilding / updating my internal server. It is strange to me that 11.0 will not install on this ASUS M3A78 MB but 11.2 will go through. I am setting up the ntp server and run into new things, ntpdate is not used anymore so you have this long string : sntp -P no -r pool.ntp.org which does the same thing or a couple of other calls that may work. It seems that pool.ntp.org will not work however so I switched to another time server.
pool.ntp.org does work on 11.0 however, it still uses ntpdate atm.
I can use ntpdate to my server from other clients and get the time but I can't use Yast to set it up, it hangs (or maybe it will eventually time out) when you test the server in the gui tool. rcntp ntptimeset comes back with no server reached on the ntp server machine so I am not confident that it will auto update itself, which I think is an issue, the server will not respond to client queries after a day or two.
I have suse 11.0 installed and now that 11.1 is out i would like to update. I have searched for this already and have found three ways of doing it:
zypper dup
zypper up
in YAST view all packages and right click and click update all if update available.
I have tried all these methods but i still seem to be running Suse 11.0 as it says in sysinfo:/ . How do i successfully update from 11.0 to 11.1?
I tried to download the Suse 11.2 DVD to do an install. When I went to do the install it failed cause it was corrupt.Not to big of deal, I had an older version of 10.2.Now that I have 10.2 installed, is there a way for me to upgrade this to 11.2 without downloading the Install DVD.I've been away from messing with Linux for a few months so I'm pretty darn rusty. I'll run Linux for awhile and when I get frustrated I'll move back to Windows. I'll mess with that for a few months and then go back to Linux...
View 6 Replies View RelatedI have installed 11.3 and really hashed it. I am getting no where and cannot find my way around. I tried to install as a partition with Ubuntu and Windows 7. Result. I have lost Both Ubuntu and windows with SUSE 11.3 installed and with YAST2 (as superuser) I cannot install belkin to get an internet connection, cannot instal Ubuntu or any thing else. I get the following;
[/media/Ubuntu 9.10 i386/wubi.exe] End-of-central-directory signature not found. Either this file is not a zipfile, or it constitutes one disk of a multi-part archive. In the latter case the centraldirectory and zipfile cannot be found on the last disk(s) of this archive. zipinfo: cannot find zipfile directory in one of the /media/Ubuntu 9.10 i386/wubi.exe or /media/Ubuntu 9.10 i386/wubi.exe.zip, and cannot find /media/Ubuntu 9.10 i386/wubi.exe.ZIP, period
I think I have not only installed this incorrectly but I have something I don't fully understand.
I would like to reinstall Ubuntu and then if I cannot get on with SUSE
I had dual boot win 7 and win xp, when i tried to install suse over win xp partition (i choose to format that partition during installation suse). I dont know how but suse keept win xp, and make 4 new partitions. After that i had to format whole hd, couse with partition magic i could not find that 4 partition. Now i install win 7 and win xp again, but i want to install suse instade of xp. Is there option to install suse. So i would have l 3 Os, i have laptop. Are 3os slowing comp.?
View 9 Replies View Relatedis it possible to upgrade simply upgrade from 11.3 to 11.4 or do i have to do a clean install? what are the procedures on linux??
View 9 Replies View Relatedhow to install FTAM on opensuse ?.Where i can download the software and how to install it..
View 2 Replies View RelatedI can't install tls in amsn !
View 1 Replies View RelatedI have a Samsung NC-10, installed Win 7 on it and after about 3 months realised that the Intel Atom processor couldn't cope very well. I defected to linux but I can't get the damn thing to boot. I downloaded the iso of openSUSE 11.3 and opened it with Daemon Tools Lite. In my first attempt, I copied and pasted the image using windows explorer onto an 8GB flash drive. I got a "Disk Error" message. (I did change the boot order so that the USB HDD had priority). I got my dad in to help and he formatted the drive to FAT32 and used xcopy in CMD to put the iso image onto the disk. Then I got the "Remove disks or other media. Press any key to restart" message. I'm annoyed now because I have spent my evenings doing this for the best part of 4 days.
View 8 Replies View RelatedI'm trying to do a new net install on my laptop. I can boot into the installation kernel and I enter the http server: (download.opensuse.org) and the folder: /distribution/11.2/repo/oss. The installation proceeds to "System Analysis" and continues 90% of the way to "Build Repository" At this point, I am greeted with a red dialogue box which says: An error occurred during the installation.
View 5 Replies View RelatedI have a Macbook && two questions MacBook Model==>MC207LL/A Here how to install suse 11.2 on my mac?(I have Windows 7 too.) are there any driver for this Model?
View 4 Replies View RelatedIm new in using SUSE. Step By Step installation of wine.) im kinda confuse of the process. tnx
View 9 Replies View RelatedI am accessing a program through X11. My OS is Suse 10.3. However when I access this program, the menu bar title are not letter but a string of characters of "[]". I need to find a way to perform a character setting for X11 using SUSE.
View 1 Replies View Relatedi have installed SUSE 11 recently and have set the domain name and netmask using YaST settings after installation.But, the domain name is empty after rebooting. I have verified this using domainname command from terminal. But, in Network settings it is there.I think the system is not picking up the domain name from YaST settings.
View 2 Replies View RelatedIm relatively new to Linux - just started working with it this week - and Im having some trouble setting up NFS. We have a 12 computer cluster running open SUSE in our lab at school, and I am trying to troubleshoot the NFS system we have created.My basic question is this - I want to find the file that sets whether or not the NFS server and client processes run on setup. Google indicates that in most linux installations, these settings can be found in the /etc/rc.conf file. I cant find this file in open SUSE, so what Im trying to figure out is where I would find the equivalent commands in open SUSE. I am basically trying to find the lines highlighted in this: <http://www.freebsd.org/doc/handbook/network-nfs.html> article are stored. I already know how to enable/disable the NFS server/client using YaST in the GUI, but I would prefer to find the file directly, as changing the settings in the GUI involves plugging a monitor, keyboard, and mouse into each of 12 boxes, and is very time consuming. I can change files straight from the terminal command line - much faster.
Additional background:
We are using NFS in two ways on our cluster - firstly, we have installed the software package (Fluent) on the host computer, and then setup the host to share this folder with the 11 slaves. To do this, we set the host as an NFS server, with the 11 slaves as NFS clients of this folder.
Secondly, we have setup working folders on each of the slaves that we would like to use to store data (each computer has a 1.5TB drive inside). To do this, we have set each of the slaves as an NFS server, sharing the working directory with the host computer, which we setup as an NFS client of each of these 11 working folders.
The problem that I am experiencing is that each of these two things works properly by itself, but when we try to use a computer as both an NFS server and an NFS client at the same time (albeit to different folders), neither works.Any thoughts on how to move forward in troubleshooting this? My current plan of attack is to unplug all of the slaves except for one from the network, and try to get a single slave to communicate properly with the host. Once I get the first slave running, I was going to add additional slaves one at a time until they were all working. Thoughts?
I'm running WIN 7 and trying to dual boot with 11.2--the install goes fine until I get to partitioning. Then I get this message: Del windows partition /dev/sda1 Resize impossible due to inconsistent FS try checking FS under windows.Del/dev/sda3 Del Windows /dev/sda5.Then it wants to install extended, swap and root. I tried to resize the partition prior to intalling SuSE with paragon partition manager which failed.Could someone tell me how I should be setting up the partitions on install please.
View 7 Replies View Related
