I have installed Debian on my computer but am having trouble setting up my wireless Internet. Under my network settings there's only one connection: Ethernet. how to create a new (wireless) connection.
Another thing is that I can't seem to open .deb files. The archive manager says that it's not supported. But I can't seem to find the dselect to open those files either.
One more question: how can I enter commands through the promp(t)? I've read all over the Internet that I can enter in commands, but I haven't found where or how.
I have an acer aspire one running Linpus Lite (i think) - worked fine for a year on wireless and LAN but yesterday I started it up, it connected fine and clicked up the wireless icon but when clicking the "Browser" icon it won't open the browser screen - repeated clicking brings up a screen that says Firefox was stopped and is still open - please shut it down- How do I do this when there are no screen commands ? I have tried switching off and re-starting the unit but no effect. What can I do to fix it ?
I am trying to open a tunnel for a friend of mine who's isp has blocked a bunch of webpages, so I was thinking I would learn how to since it might come in handy in the future Anyway, so I looked at a couple of videos about going in to network settings and changing the setting to manual and write down the desired IP (in my case 192.168.0.137). Then I went into my router (it's a D-link DI 524) and tried adding my static IP as the DMZ computer. I then restarted, everything looked fine, the router saved the settings and the eth0 still hade the information saved so I wanted to try it out. I just googled "try my ports" and I found a website called [URL]...But no ports worked for me.. I tried double checking everything, checking for errors. I couldn't find anything so I'm guessing you might have a clue!
EDIT: It seemed I had to have a program that actually used the port for it to work.. It's working anyway, so if you could move it to [SOLVED] I'd be happy
I have just installed Linux Mint 8 Helena & it appears to be working well alongside my xp system. The problem I do have is setting up the much needed broadband connection. I have an adsl speedtouch330 usb modem, with tesco.net as my server, which works just fine on xp hence this mail. Am I missing something obvious, or have I got myself into depths much deeper & complex than I thought.
I'm trying to set up a wireless AP with Internet sharing. I currently have the AP setup with hostapd and a dhcp server. The clients can connect but there is not Internet sharing. Now my situation is somewhat uniqe in that my internet connection is my teathered android cell phone. The tether app is azilink and i use openvpn to create a virtual networking interface(tun0).
I'd like to set up a fileserver for myself and a few trusted individuals. I'm computer savvy and I use various linux servers frequently for work, but this is my first time trying to setup my own. Is it possible to have a Samba server setup so it is both secure and facing the Internet? Two questions:
Will opening Samba ports make my default Ubuntu server particularly vulnerable to penetration? More than having an SSH server running? Does Samba/ can Samba be configured to encrypt traffic or is it sent plainly? If so, does Windows and Mac support this secure communication?
If not, what would you suggest? I'd like to achieve something like a network drive and at a difficulty level that my parents could use this if they really wanted to. I will be storing things like financial information and tax returns, but no weapons-grade secrets.
i am using Fedora 14. Once system get hanged during opening a video file so I had to restart the system by pressing restart button. But after restarting there are few problems appearing like system monitor not opening and Thunder bird opening but not showing any folder including inbox.
---------- Post added at 04:54 AM GMT ---------- Previous post was at 04:42 AM GMT ----------
Setting up an Internet proxy In the past I had set a computer to act as an Internet proxy. This would be multihomed, and running dansguardian, tinyproxy and firehol. Then webmin would be used as interface. By time I realised that this system is far from effective. Is there some other way to setup a proxy to be placed between users and the Internet? I would like (the admin) to be able to see in which sites users go and have a lot of control on access..
One of the apps I would like to try out is usenext.Selectint the download for the right version (Linux - Suse, Red Hat, Fedora) I get the rpm file.Either opening this straight away or saving then opening it comes back with the following errors:
I'm trying to connect to the internet though the terminal and I think i've determined my key is off.
Here is what I do:
Code:
So form this i go:
Code:
where the last four #### are actually the numbers but ii'm not sure if it's possible to reverse a wep. My connection uses wpa & wpa2 encryption but doesn't accept that key. I'm not sure what my key is supposed to look like or be but i'm pretty sure the key is whats keeping me from connecting. If I change my key while browsing the internet i can't get any information. So is it possible to just put in my pasword. Or what is the key supposed to look like?
i got some bad virus on my windows and there is no way to remove it so i need to use linux some time till i find a way to remove the virus.I run a online test to see what linux distribution will be the best for my pc since i have very bad/old pc and i found this one.Everything was fine but when it come the part to get internet access it gone bad...I have adsl modem the model model is DSL-360R.This is how i create a internet access in windows.I open con.panel go to network conections and there is a local area conection icon.Right click/properties the select Internet protocol(TCP/IP) and click install i enter thoose numbers(given by my net provider) Ip address: 192.168.1.2 and etc...(If you need the other numbers i will tell you.).
Then i create a new conection.I use a manual login i have username [URL] and password like 2003.I need to get internet on my linux.I aredy called the support of my operator but thoose noobs said they dont support linux and the man was kindly and said somethink about drivers and said to try somethink with spconfig or somethink like that i dont remmber all i know it didnt worked.That is it i tell you all i know and i hope that u can help me and tell me how to create a new connection. P.s my first impression from openSUSE> The os looks great, i love the instaled theme.
I just installed Ubuntu 10.04 and am very excited about using it for the first time. I am very new to computers and stuff though so I don't have much of a clue as to what I'm doing. Although it installed fine, for my wireless connection it says "device not ready". What does this mean and how do I connect to the internet?
I set up a static IP address yesterday, following the instructions at the top of this page and since my machine no longer connects to the internet (although all other machines are connecting fine, so I know it's a result of this change).
I have a ubuntu server , can advise if I want to change the network setting ( eg. IP address , gateway address etc ) , which one is the configuration file ? for example , if I want to change eth0 setting , what file I should update ?
I have virtual XP set up with VirtualBox and I can't (been trying for a couple weeks now) to get an Internet connection on the VM. I have tried using NAT, bridged adapters and nothing.
I just installed Ubuntu 10.04 . Need to get my wireless router working on my HP laptop. Have been using a Linksys WRT54G Router with windows and it is working properly. Tried setting up in NetworkManager but it does not work.
When looking at things in the Ubuntu terminal it says the network is DISABLED.
I have installed the wireless driver shown in the additional drivers tool but am unable to understand how to set up a wifi hotspot so that i can use internet on my android phonethe guides google returned are a bit too complicated with ip tables and all
I have a Ubuntu 10.10 LAMP workstation and it's working good. I need people to see it from the internet. I assigned an IP address to it and added it to the DMZ list it in the router. My friend can't see it at all from his location. What should I do now? I can see it on my local network OK. I don't want to switch my domain over to it until I can see if from the internet.I gave him my external IP address to try to connect to the system. My external IP is 76.89.114.72
The problem isn't with thew new computer but with my computer running Ubuntu. The problem is that I'm having trouble getting the Internet to work. Before the router I just plug my PC straight into the modem but now with the router I can't get on the Internet. I can get a connection to the router but no Internet. I know the it is not the router because I use my PS3 and it worked fine. I spend like an hour just trying to get the connection but can't figure out the Internet problem. What I did to get the connection is copy the ip address, Mac, and etc. from the PS3. Then I made a new connection and put the data in the IPV4 settings and it got a connection but I'm not sure if I did that right or just got lucky
I have tested several Linux Distros over the last weeks, and with all of them my DSL connection have been working out of the box (for intance Mandriva, Ubuntu, Mint). But it does not work on Dreamlinux, neither on Live CD or now where Dreamlinux is installed on my harddisk.
According to the guidelines provided by my Internet provider I need to use TCP/IP and activate DHCP. And make sure that PPPoE is not activated.
I see nowhere I can do this in Dreamlinux. In the controle panel i can run Wicd. Then I can chose to de-activate Wicd - this gives me an option of entering Adress, Networking mask, Gatway and Nameserver - for static ip it says - and this is the opposit of DHCP, right??
SO - what to do? Should I get a debian package or something? (Dreamlinux is using debian packages, as far as I could see)
I have to set up a proxy for my work's network. No computer except the proxy has a direct internet connection. The proxy will NOT be transparent so it authenticates with Active Directory and allows or denies pages. The squid proxy is up, and working accordingly, denying and allowing what's needed to who's needed. BUT! Thunderbird and Outlook didn't work, so in less than 10 minutes I was forced to fall back.
I read googling a lot, and searching a bit here about socks, which seems to be what I need but also that squid is already a socks proxy. Web pages were the concern, it's not needed that other stuff is authenticated, it might as well be transparent for Outlook, Thunderbird and other programs *for example, it's not needed to block a Warcraft III game, though, allowing it explicitly is not the point either* but as of now, none can connect *haven't actually tried Warcraft though, but stuff like Adobe's updater didn't work either and I recall someone mentioned Windows Live messenger didn't either* The Squid Proxy is a CentOS.
I am new to Linux and Debian. I have Compaq Presario R3000 laptop, which is 5 years old now. I have RealTek RTL8139 family PCI Fast Ethernet NIC. Currently I have a broadband connection at home. I have dual boot Windows XP Professional and Debian (which I installed a week ago through CD). I have done some preliminary tests for the network and I am posting the screenshots for the tests (e.g. lspci, ifconfig, etc.). I also did two more commands. For 'cat /etc/network/ifstate' the output was 'No such file or directory'. Same output was for the command 'cat /etc/network/options'.
I recently used this process to connect my Samba network to be able to access and allow Windows XP machines to access my computer on my office network.
For various reasons, all the XP computers on the network are set to fixed (do we say static?) IP addresses with manual DNS. Hence I realised during the Samba setup that I had to set a static IP on my Ubuntu machine similar to my Windows static IP's (ie 192.168.10.?) in order to be able to see the Windows share PC's properly.
Once I set my Ubuntu machine to static IP of 192.168.10.3 with subnet of 255.255.255.0 and gateway of 192.168.0.1 then I was able to access and be accessed by PC's on the network. However I couldn't access the internet after this. I input the DNS server in the edit connections as you can see per the attachment. All these settings (except the IP address obviously) were all now exactly the same as the PC machines, and I thought I'd now be able to access the windows network, as well as have access to the internet, however, even though my wired network is connected there is still no internet access.
I'm using the GUI under network connections to make all these changes if that is important. I can't understand why this doesn't work?
I have successfully set up a cable internet connection in Ubuntu (created a new DSL connection by typing login and password and connected the cable - it worked). But I have no idea how I can set up a wireless internet connection.I have a wireless access point TL-WA501G, laptop and a cable internet connection with fixed IP address.My laptop can see the wireless access point. But I really do not know how to make it all work and what to start from.
I have set up one of my linux box as link load balancer for two ADSL connection. After deployment, I have found out that instead of being fast, it has become slow. What I have observed that my request get out to internet but comes back intermittently. Is this a standard scenario ?
I have a home Debian server running, and i would like to set it up as a gateway. I have 2 networkcards in it. So internet comes from the modem and on the other card i want to setup a dhcp server and it has to share the internet. But i want it also to connect to a vpn and share the internet of the vpn.. Is that possible?
I have trouble getting a gateway to the internet when setting eth0 with a fixed IP address. The gateway address (192.168.2.1 my modem/router) resets to 0.0.0.0 whenever I apply the changes. DHCP works fine but I need a fixed address for my server.
