Server :: Setting A Proxy Thunderbird And Other Non Internet Browser?

Aug 5, 2010

I have to set up a proxy for my work's network. No computer except the proxy has a direct internet connection. The proxy will NOT be transparent so it authenticates with Active Directory and allows or denies pages. The squid proxy is up, and working accordingly, denying and allowing what's needed to who's needed. BUT! Thunderbird and Outlook didn't work, so in less than 10 minutes I was forced to fall back.

I read googling a lot, and searching a bit here about socks, which seems to be what I need but also that squid is already a socks proxy. Web pages were the concern, it's not needed that other stuff is authenticated, it might as well be transparent for Outlook, Thunderbird and other programs *for example, it's not needed to block a Warcraft III game, though, allowing it explicitly is not the point either* but as of now, none can connect *haven't actually tried Warcraft though, but stuff like Adobe's updater didn't work either and I recall someone mentioned Windows Live messenger didn't either* The Squid Proxy is a CentOS.

View 1 Replies


ADVERTISEMENT

Networking :: Setting Up An Internet Proxy?

Jun 1, 2009

Setting up an Internet proxy In the past I had set a computer to act as an Internet proxy. This would be multihomed, and running dansguardian, tinyproxy and firehol. Then webmin would be used as interface. By time I realised that this system is far from effective. Is there some other way to setup a proxy to be placed between users and the Internet? I would like (the admin) to be able to see in which sites users go and have a lot of control on access..

View 2 Replies View Related

Server :: Can't Access Squid Proxy From Firefox Browser

Oct 18, 2010

I have Fedora Core 13 running. I have successfully (I think) installed squid, although I may have it configured incorrectly. I can ssh into the box from work via putty, but I can't use the proxy. I get a message "the connection to the server was reset while the page was loading" I can use the proxy from my home network, and have watched the tcpdump for port 3128 while using the proxy. I have turned off iptables completely (I'm not sure yet how to just allow squid)...

View 3 Replies View Related

Ubuntu :: Setting Up Squid Proxy Server?

Dec 28, 2010

I followed this guide: [URL] and restart the Squid Server with no errors but when I try to SSH into it:

Code:

ssh -L 8080:squidserver:8080 user@squidserver

It just hangs there for a long time, not timing out and eventually (after a long wait) I get this:

Code:

ssh_exchange_identification: Connection closed by remote host

What could be the problem? I can SSH normally into the computer, but not into the proxy server. Do I need to forward the 8080 port on that network?

View 2 Replies View Related

Ubuntu Networking :: Proxy Setting Did Not Allow To Connect To Server

Feb 12, 2011

I used windows OS and installed Ubuntu 10.04 (amd64) in separate partition and works well but had a problem in internet connectivity. Likely reason may be the proxy setting that we used in college (currently). I used this commands to set up the IP address and gateway.

ifconfig -a | grep eth
"eth0"
sudo ifconfig eth0 192.168.5.209 netmask 255.255.255.0

[code]....

Then I manually set the proxy setting of HTTP which is given as proxy server 192.168.5.2 and port as 8000, further more there is a wins setting which is 192.168.1.178, really don't know where to put this number.

View 2 Replies View Related

Security :: Lock Down Individual Users From Setting A Proxy Server?

Feb 16, 2010

how to lock down individual users from setting a proxy server. Its a server not a WS so it should never go to the internet. I want to lock down the system side and firefox 5 settings.

View 14 Replies View Related

Server :: Squid Access / Setup Automatically Get The Proxy Setting As Dhcp?

Jun 15, 2011

I my office I have configure dhcp in my centos sever
eth0 for adsl-setup
eth1 for lan 172.16.0.4
I am using squid proxy server for internet access,

in my office all are using laptop through wifi , so i need to configure the browser proxy setting for accessing internet.

is there any way to setup automatically get the proxy setting as dhcp. I have tried transparent proxy but no success.

View 3 Replies View Related

Server :: Ssh When Internet Is Behind A Proxy?

Jul 23, 2011

I want to SSH to my server which is some where on internet. I am having internet access on my lan via a proxy i.e. in firefox I have to specify the option of IP+ port of my proxy server.What do I need to do in order to be able to SSH to my server which is on internet.The proxy software used on the main server for creating it as a proxy server is ccproxy and that is a windows machine.I use Ubuntu and my server where I have to SSH is also a Ubuntu server.

View 5 Replies View Related

Networking :: Browser Using Proxy Not Using Proxy's IP?

Feb 23, 2010

I've setup squid proxy st time on centos 5.This is my current setup.squid.conf:Quote:acl our_networks src 192.168.10.0/24 ttp_access allow our_networksQuote:

internet -- modem -- Firewall --switch--squid proxy (192.168.10.100)
--client workstation ((192.168.10.200)
(client workstation is connected to the same switch as the squid proxy)

[code]...

View 1 Replies View Related

Server :: Internet Access Via Squid Proxy

Apr 28, 2010

Centos 5.4 distro using on remote machine. I have remote site where internet access given via squid proxy. So when we enter in browser it start working internet fine. But on command line (bash shell prompt terminal) like wget, ping, nslookup, traceroute etc., these commands does not work.

View 6 Replies View Related

Ubuntu Servers :: Internet Access Via Proxy Server ?

Apr 28, 2010

Ubuntu lts server distro using on remote machine. i have remote site where internet access given via squid proxy. so when we enter in browser it start working internet fine. but on command line(bash shell prompt terminal) like wget,ping,nslookup,traceroute etc these commands does not work.

View 3 Replies View Related

Programming :: How Proxy Server Get Html Page From Internet

Jun 15, 2010

im making client(browser) and proxy server application in linux and using c/c++....can any one guide me that how proxy server get page from internet and send it to the client (browser)?and how that page will be displayed on my browser??meanz that will be only text...if text then how i can display graphical page....

View 3 Replies View Related

Ubuntu Networking :: Unable To Connect To Internet Via Proxy Server With Apt-get

May 14, 2010

I am unable to connect to the Internet in lucid via a proxy server using apt-get or synaptic. Opera & firefox connects to the internet fine with the proxy setting.

I have tried the following solutions:

1) set proxy setting using systems|preferences|network proxy

2) editing ~/.bashrc & /etc/.bashrc

3) creating a /etc/apt/apt.conf file.

4) putting the proxy setting in synaptic

For the proxy setting I have used the both the verbose name as well as the ip address. There is no logon requirements for the proxy server. Either formats work in the browsers.

View 2 Replies View Related

Ubuntu Servers :: Internet Load Balancing With Proxy Server?

Jul 29, 2011

I am Install Ubuntu Server 10.04LTS and install 3 LAN Card. 1st & 2nd LAN are use ISP1 & ISP2 with public static IP and 3rd LAN connect with Local Switch. How to configure this server as Load Balancing Internet and configure Proxy Server with user authentication and user wise site blocking.

View 1 Replies View Related

OpenSUSE Network :: Configure YAST Internet Configuration Through Proxy Server?

May 15, 2010

I use openSUSE 11.1 and my YAST can't connect Internet: How to configure my YAST Internet configuration through proxy server in order to download and install the programs (for example dwnld and install WML from [URL])

View 9 Replies View Related

Server :: Delay Pools - Managing Internet Bandwidth Thru Squid Proxy

Jan 2, 2010

I have configured a normal squid & now I want to manage internet bandwidth thru. "squid" proxy only.
Squid proxy server ip is :- 192.168.17.30
Client PC ip addres is 192.168.17.25
Total bandwidth avaialable :- 2 Mbps
Now, I want to limit bandwith of 400 kbps for the ip address 192.168.17.25 pc only. So, is there any method available for bandwidth limiting for a single pc?

View 2 Replies View Related

Ubuntu Networking :: Setup A Proxy Server Who Just Redirect The Internet Connection To My Second Computer?

Jan 9, 2011

I want to settup a proxy server who just redirect the internet connection to my second computer. I try Squid Proxy but its too complicated for me. Can you sugest me another more simple program to do what i want?

View 1 Replies View Related

Networking :: Squid With Iptables - Make Clients To Browse Internet Only From Proxy Server?

Jun 14, 2010

i have the following ip assignments

fedora (iptables)
eth0 -private :192.168.1.1
eth1 -public : 186.117.50.6
squid proxy
192.168.1.10:3128
my clients range
192.168.2.0/24

how can i make my clients to browse internet only from proxy server my network is NAT 'ed. Please specify a iptable rule to allow internet access for my clients to browse ONLY if they come through proxy server.

View 1 Replies View Related

Server :: Squid - Not Working Though Proxy And The Internet Explorer Is Getting Very Slow And Freezing The Computer

Nov 6, 2010

I have configured a squid proxy server with @2 eth in different network subnet and with site blocking and extn file download blocking. One eth0 for office wired network and another eth1 is for office wireless network for laptop use for guest and visitors.

The problem is [URL] is an Indian government website, which is not working though this proxy server and the Internet Explorer is getting very slow and freezing the computer. In alternate I have configured a another test server with squid proxy with out any security and test the same. the problem is still with the all the computer in the network. The above website is perfectly working with Gateway configuration in TCP/IP properties in Network Configuration in MS Windows XP computers but through squid proxy its not working.

View 3 Replies View Related

Fedora :: Changing Browser In Thunderbird

Apr 21, 2010

I'm running F12 LXDE on one of my laptops and run Thunderbird as my preferred email-client on that laptop. But I can't seem to find a way, in Thunderbird, to change my preferred browser to Opera. I must be overlooking something..

View 10 Replies View Related

Fedora :: Thunderbird 3.0.4 Won't Open Browser On URL Click

Dec 21, 2009

Just in the past few days, after I installed a recent spate of updates, my Thunderbird stopped opening up URLs from within an email into a browser window.I'm using F12 and just updated to the latest Thunderbird 3.0.4 on the 9th. But things didn't get weird just then. Perhaps it was the update to Firefox on the 16th when I got 3.5.6 that did it. Firefox still opens up a window from my RSS feed reader (Liferea) just fine but Thunderbird can't open diddly unless I manually copy the link location and paste it into the browser window.

View 2 Replies View Related

Ubuntu :: Connect Thunderbird With Browser Chromium?

Jul 28, 2011

I am using Thunderbird for E-Mail. I need to connect Thunderbird with the browser Chromium. I cannot find the Chromium launch location.

View 2 Replies View Related

CentOS 5 :: Unable To Use Outlook/thunderbird Behind Squid Proxy

Jan 7, 2010

I am not able to use outlook or any other email client on my computer(to access gmail account) I am also not able to forward port to my computer for a bit torrent client

I can access the internet using proxy settings

I have just installed CentOS 5 as a server with 2 NIC's for my home network.

My set up is something like this

adsl wireless router(static ip from ISP) - (192.168.0.1/24) Cent os server (10.1.1.1/8) - switch/hub - clients(windows XP/Vista,Linux)

the linux server acts as a Web Server,DHCP and Squid proxy server

Will installing an email server resolve my problem?

View 4 Replies View Related

OpenSUSE :: Unable To Change Default Browser In Thunderbird

Jun 14, 2010

I've been using Thunderbird (2.0.0.24) with html attachments opening in Firefox.I just installed the new Chrome browser (5.0.375.70) and like it very much, enough so that I decided to switch from Firefox now that the Add-Ons I like are available for Chrome (Lastpass, Adblock, AutoPager). I've made Chrome the default browser in KDE's "Configure Desktop>Default Applications", but html attachments in Thunderbird still open in Firefox.I've tried most of the fixes offered on this and other forums as well as those offered by Mozilla's various help files, but nothing works. Most suggestions refer to fixes for 1.x versions of Thunderbird and no longer can be used.I just checked another OpenSUSE 11.2 PC with the newer 3.04 version of T'bird and saw no solution there either.

View 2 Replies View Related

Ubuntu :: Proxy Settings For Browser?

Jul 6, 2010

I'm running proxoid (tethering app for android) which operates using a proxy server.

I set the system-wide proxy settings and they seem to work for most part except not on Google Chrome and Opera. Firefox works fine though flash is never detected. I get a 105 "NAME NOT RESOLVED" error on Chrome.

Also whenever I install something using apt-get, it tells me that the packages cannot be authenticated.

View 1 Replies View Related

Ubuntu :: Thunderbird Won't Open Http Links In Browser / Only Https

Apr 30, 2010

When I click on an http link in Thunderbird, nothing at all happens. There's no error message on the console, there's no new browser starting, and there's no new tab opening with the browser already running.

I've tried: sudo update-alternatives --config x-www-browser, choosing firefox.I've also tried: adding a new string value to Thunderbird's warranty-voiding config: network.protocol-handler.app.http, with a value of /usr/bin/firefox. This was recommended in various threads.But no luck.There's an entry for https - firefox on the Attachment tab of the preferences, and https links are indeed opening in Firefox. But not http.KDE 4.4.2 itself has default mail client and browser set to Thunderbird 3.0.4 and Firefox 3.6.3 (both from the repositories, no website downloads).

View 3 Replies View Related

Debian Configuration :: Setting Up A VPN & DHCP Server - Connect And Share The Internet

Aug 24, 2010

I have a home Debian server running, and i would like to set it up as a gateway. I have 2 networkcards in it. So internet comes from the modem and on the other card i want to setup a dhcp server and it has to share the internet. But i want it also to connect to a vpn and share the internet of the vpn.. Is that possible?

View 4 Replies View Related

Networking :: Setting Up A VPN For Windows Clients To Reach Debian Server Over The Public Internet

Jan 30, 2010

I'm trying to give some windows users a permanent connection to a samba share behind a firewall over the public Internet. I know I can give them access with something like winscp (which they have done) but really I'd like to do it with a VPN so it seems seamless to the user. However I have no idea how to set up the server to support this and am finding the documentation a bit confusing. The samba share is on a Debian box and the firwewall is a Linksys WRT54GL.

View 1 Replies View Related

Networking :: Squid Proxy Server On Ubuntu And WPAD - Proxy Auto Detection?

Dec 9, 2010

Currently my DHCP Server is working now what i want to have is auto detection of squid proxy in any browser but I still got an error in my dhcp server when I restart it.

My Config:

# DHCP configuration generated by Firestarter
ddns-update-style interim;
ignore client-updates;

[code]....

View 2 Replies View Related

Server :: Set Up Squid3 Proxy As A Transparent Proxy & Iptables Config

Feb 23, 2011

I am trying to set up my squid3 proxy as a transparent proxy - right now, I have to manually configure browsers to access via proxy. I understand that I have to put some rules into Iptables and also some further directives in the squid.conf.

I have a couple of specific questions. The proxy server is running on a Ubuntu 10.04 workstation and this machine also acts as a dhcp server for the network. I have just one subnet , namely 192.168.0.1-254 There is only 1 network card. Is it much easier to put in a second network card or is it just as easy to configure the existing lan card as a dual IP?

Is it necessary to configure these 2 IP's ( whether they are via 2 lan cards or dual IP on single card ) to be on different subnets. i.e ETH0 192.168.0.1 and ETH1 192.168.1.1 or is ok to have something like ETH0 192.168.0.1 and ETH1 192.168.0.254 ( where ETH0 is the one facing the LAN and ETH1 points to the modem router / switch i.e The Internet ) Where specifically do I save the Iptables rule configuration file and what must I call it ?

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved